First of all devm_memremap() function returns an error pointer, it
doesn't return NULL.  And second we need to set the error code on these
paths.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is to support phc_index of ethtool_ts_info.
Also make the rtc drvier depend on FSL_DPAA2_ETH because
this driver is only useful when PTP programs are getting
hardware time stamps on the PTP Ethernet packets using the
SO_TIMESTAMPING API.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since hardware timestmaping has been supported in driver, this
patch is to add the get_ts_info interface for ethtool to show
timestamping capability.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hardware timestamping is supported both on Rx and Tx paths.
On Rx, timestamping is enabled for all frames. On Tx, we
only instruct the hardware to timestamp the frames marked
accordingly by the stack.
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reorder the functions in linux_wlan.c file to avoid having explicit
declaration of static functions. Forward declaration is avoided
with the help of reordering the function.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Defined function as static which are used only in single file. And also removed
their declaration from header file.
Below function are changed to static
wilc_wlan_initialize()
wilc_wlan_deinitialize()
wilc_wlan_get_firmware()
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove unnecessary inner block {\* *\} in
handle_remain_on_chan().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename P2P_LISTEN_STATE variable to avoid using uppercase for variable
name to follow linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unused enum.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove unused element from 'wilc_priv' structure.

Below elements are removed in 'wilc_priv' structure:

struct WILC_WFI_packet *ppool;
struct WILC_WFI_packet *rx_queue; /* List of incoming packets */
int rx_int_enabled;
int tx_packetlen;
u8 *tx_packetdata;
struct napi_struct napi;
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename wilc1000_wlan_init() & wilc1000_wlan_deinit() function to avoid
unecessary 'wilc1000' prefix in function to be inline with other
function naming convension.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to follow name as per linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to have struct name as per linux coding style.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the mac status macro to follow the same naming style. Also move
them to keep together.

Renamed like below

>From ------------------------> To

WILC_MAC_STATUS_INIT -> MAC_STATUS_INIT
MAC_CONNECTED --------> MAC_STATUS_CONNECTED
MAC_DISCONNECTED -----> MAC_STATUS_DISCONNECTED
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove below #define which are not used in code:

WILC_MAC_STATUS_READY
WILC_MAC_STATUS_CONNECT
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove unused #define.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unused typedef and also removed the
unecessary comment about that typedef.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unused variable.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to simplify the if conditions logic in spi_data_write().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unnecessary {/**/} block in
wilc_parse_network_info().
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unused variables in
wilc_parse_network_info(). The value is assinged to these local
variables but assinged value is not used in that function.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the 'cmd' variable in wilc_spi.c. Instead of
using cmd now passing the command directly.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to remove the unnecessary use of '==' check used in if
conditions.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup patch to align the #define used in wilc_spi.c file by adding the
tabs.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit refactors ks_wlan_translate_scan function with
the following changes:

    - reorder local variables
    - use ether_addr_copy to copy ethernet addresses
    - change style in 'current_ev' variable assignments
    - make use of some ternaries avoiding if-else code
    - use preferred style for comments
    - extract common code into a new ks_wlan_add_leader_event
      function

After this changes readability has been improved.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit removes a blank line which is included between
declarations and it has not sense at all.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use ether_addr_copy to copy ethernet addresses instead of
using custom memcpy for that.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The if-else code in ks_wlan_get_power function is not needed
at all and can be achieved with a simple boolean assignation.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change if logic to handle invalid case for operation_mode
at first avoiding an 'else' path.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use ether_addr_copy to copy ethernet addresses instead
of a custom memcpy. This improves readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of ether_addr_copy instead of memcpy for copying
ethernet address data in ks_wlan_set_wap function and avoid
an 'else' just changing if logic to check invalid values first.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To avoid a long line align values in static array
frequency_list array.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of manually memcpy ethernet addresses use ether_addr_copy
function for this purpose.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit cleans a bit ks_wlan_set_pmksa function removing
nonsense comments as well as make use of ether_addr_* family
functions written to not do manually things that were being
here. Minor single if brackets has been removed also.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit refactors ks_wlan_set_cts_mode function to
handle invalid values first and then assign the good
one changing a bit logic to use a ternary operator.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change if logic to handle invalid values first and just
assign at the end the valid one if it is the case.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit change logic to simplify conditional paths in
ks_wlan_set_power_mgmt function. It handles invalid's first
and just finally assign a valid value.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit changes logic to handle invalid values first
and just assign valid ones afterwards.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change if condition to handle invalid value first and
avoid nonsense else's path improving readability.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now that the SPDX tag is in all gdm724x files, that identifies the
license in a specific and legally-defined manner.  So the extra GPL text
wording can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>