- 24 Jan, 2020 14 commits
-
-
Meir Lichtinger authored
Add the upcoming ConnectX-7 device ID. Fixes: 85327a9c ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by:
Meir Lichtinger <meirl@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Paul Blakey authored
The pool sizes represent the pool sizes in the fw. when we request a pool size from fw, it will return the next possible group. We track how many pools the fw has left and start requesting groups from the big to the small. When we start request 4k group, which doesn't exists in fw, fw wants to allocate the next possible size, 64k, but will fail since its exhausted. The correct smallest pool size in fw is 128 and not 4k. Fixes: e52c2802 ("net/mlx5: E-Switch, Add chains and priorities") Signed-off-by:
Paul Blakey <paulb@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
David S. Miller authored
Vasily Averin says: ==================== netdev: seq_file .next functions should increase position index In Aug 2018 NeilBrown noticed commit 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface") "Some ->next functions do not increment *pos when they return NULL... Note that such ->next functions are buggy and should be fixed. A simple demonstration is dd if=/proc/swaps bs=1000 skip=1 Choose any block size larger than the size of /proc/swaps. This will always show the whole last line of /proc/swaps" Described problem is still actual. If you make lseek into middle of last output line following read will output end of last line and whole last line once again. $ dd if=/proc/swaps bs=1 # usual output Filename Type Size Used Priority /dev/dm-0 partition 4194812 97536 -2 104+0 records in 104+0 records out 104 bytes copied $ dd if=/proc/swaps bs=40 skip=1 # last line was generated twice dd: /proc/swaps: cannot skip to specified offset v/dm-0 partition 4194812 97536 -2 /dev/dm-0 partition 4194812 97536 -2 3+1 records in 3+1 records out 131 bytes copied There are lot of other affected files, I've found 30+ including /proc/net/ip_tables_matches and /proc/sysvipc/* This patch-set fixes files related to netdev@ https://bugzilla.kernel.org/show_bug.cgi?id=206283 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Vasily Averin authored
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
-
Eric Dumazet authored
Latest commit 85369750 ("tcp: Fix highest_sack and highest_sack_seq") apparently allowed syzbot to trigger various crashes in TCP stack [1] I believe this commit only made things easier for syzbot to find its way into triggering use-after-frees. But really the bugs could lead to bad TCP behavior or even plain crashes even for non malicious peers. I have audited all calls to tcp_rtx_queue_unlink() and tcp_rtx_queue_unlink_and_free() and made sure tp->highest_sack would be updated if we are removing from rtx queue the skb that tp->highest_sack points to. These updates were missing in three locations : 1) tcp_clean_rtx_queue() [This one seems quite serious, I have no idea why this was not caught earlier] 2) tcp_rtx_queue_purge() [Probably not a big deal for normal operations] 3) tcp_send_synack() [Probably not a big deal for normal operations] [1] BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1864 [inline] BUG: KASAN: use-after-free in tcp_highest_sack_seq include/net/tcp.h:1856 [inline] BUG: KASAN: use-after-free in tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891 Read of size 4 at addr ffff8880a488d068 by task ksoftirqd/1/16 CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load4_noabort+0x14/0x20 mm/kasan/generic_report.c:134 tcp_highest_sack_seq include/net/tcp.h:1864 [inline] tcp_highest_sack_seq include/net/tcp.h:1856 [inline] tcp_check_sack_reordering+0x33c/0x3a0 net/ipv4/tcp_input.c:891 tcp_try_undo_partial net/ipv4/tcp_input.c:2730 [inline] tcp_fastretrans_alert+0xf74/0x23f0 net/ipv4/tcp_input.c:2847 tcp_ack+0x2577/0x5bf0 net/ipv4/tcp_input.c:3710 tcp_rcv_established+0x6dd/0x1e90 net/ipv4/tcp_input.c:5706 tcp_v4_do_rcv+0x619/0x8d0 net/ipv4/tcp_ipv4.c:1619 tcp_v4_rcv+0x307f/0x3b40 net/ipv4/tcp_ipv4.c:2001 ip_protocol_deliver_rcu+0x5a/0x880 net/ipv4/ip_input.c:204 ip_local_deliver_finish+0x23b/0x380 net/ipv4/ip_input.c:231 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:442 [inline] ip_rcv_finish+0x1db/0x2f0 net/ipv4/ip_input.c:428 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:538 __netif_receive_skb_one_core+0x113/0x1a0 net/core/dev.c:5148 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5262 process_backlog+0x206/0x750 net/core/dev.c:6093 napi_poll net/core/dev.c:6530 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6598 __do_softirq+0x262/0x98c kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:603 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595 smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 10091: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521 slab_post_alloc_hook mm/slab.h:584 [inline] slab_alloc_node mm/slab.c:3263 [inline] kmem_cache_alloc_node+0x138/0x740 mm/slab.c:3575 __alloc_skb+0xd5/0x5e0 net/core/skbuff.c:198 alloc_skb_fclone include/linux/skbuff.h:1099 [inline] sk_stream_alloc_skb net/ipv4/tcp.c:875 [inline] sk_stream_alloc_skb+0x113/0xc90 net/ipv4/tcp.c:852 tcp_sendmsg_locked+0xcf9/0x3470 net/ipv4/tcp.c:1282 tcp_sendmsg+0x30/0x50 net/ipv4/tcp.c:1432 inet_sendmsg+0x9e/0xe0 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 __sys_sendto+0x262/0x380 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto net/socket.c:2006 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:2006 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 10095: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kmem_cache_free+0x86/0x320 mm/slab.c:3694 kfree_skbmem+0x178/0x1c0 net/core/skbuff.c:645 __kfree_skb+0x1e/0x30 net/core/skbuff.c:681 sk_eat_skb include/net/sock.h:2453 [inline] tcp_recvmsg+0x1252/0x2930 net/ipv4/tcp.c:2166 inet_recvmsg+0x136/0x610 net/ipv4/af_inet.c:838 sock_recvmsg_nosec net/socket.c:886 [inline] sock_recvmsg net/socket.c:904 [inline] sock_recvmsg+0xce/0x110 net/socket.c:900 __sys_recvfrom+0x1ff/0x350 net/socket.c:2055 __do_sys_recvfrom net/socket.c:2073 [inline] __se_sys_recvfrom net/socket.c:2069 [inline] __x64_sys_recvfrom+0xe1/0x1a0 net/socket.c:2069 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a488d040 which belongs to the cache skbuff_fclone_cache of size 456 The buggy address is located 40 bytes inside of 456-byte region [ffff8880a488d040, ffff8880a488d208) The buggy address belongs to the page: page:ffffea0002922340 refcount:1 mapcount:0 mapping:ffff88821b057000 index:0x0 raw: 00fffe0000000200 ffffea00022a5788 ffffea0002624a48 ffff88821b057000 raw: 0000000000000000 ffff8880a488d040 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a488cf00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8880a488cf80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880a488d000: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8880a488d080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a488d100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 85369750 ("tcp: Fix highest_sack and highest_sack_seq") Fixes: 50895b9d ("tcp: highest_sack fix") Fixes: 737ff314 ("tcp: use sequence distance to detect reordering") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Cambda Zhu <cambda@linux.alibaba.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a printk message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a pr_warn message. Fix it. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a IP_VS_ERR_RL message. Fix it. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a hw_dbg message. Fix it. Signed-off-by:
-
- 23 Jan, 2020 26 commits
-
-
Cong Wang authored
syzbot reported an out-of-bound access in em_nbyte. As initially analyzed by Eric, this is because em_nbyte sets its own em->datalen in em_nbyte_change() other than the one specified by user, but this value gets overwritten later by its caller tcf_em_validate(). We should leave em->datalen untouched to respect their choices. I audit all the in-tree ematch users, all of those implement ->change() set em->datalen, so we can just avoid setting it twice in this case. Reported-and-tested-by: syzbot+5af9a90dad568aa9f611@syzkaller.appspotmail.com Reported-by: syzbot+2f07903a5b05e7f36410@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
David S. Miller authored
Finn Thain says: ==================== Fixes for SONIC ethernet driver Various SONIC driver problems have become apparent over the years, including tx watchdog timeouts, lost packets and duplicated packets. The problems are mostly caused by bugs in buffer handling, locking and (re-)initialization code. This patch series resolves these problems. This series has been tested on National Semiconductor hardware (macsonic), qemu-system-m68k (macsonic) and qemu-system-mips64el (jazzsonic). The emulated dp8393x device used in QEMU also has bugs. I have fixed the bugs that I know of in a series of patches at, https://github.com/fthain/qemu/commits/sonic Changed since v1: - Minor revisions as described in commit logs. - Deferred net-next patches. Changed since v2: - Minor revisions as described in commit logs. ==================== Signed-off-by:
-
Finn Thain authored
Section 5.5.3.2 of the datasheet says, If FIFO Underrun, Byte Count Mismatch, Excessive Collision, or Excessive Deferral (if enabled) errors occur, transmission ceases. In this situation, the chip asserts a TXER interrupt rather than TXDN. But the handler for the TXDN is the only way that the transmit queue gets restarted. Hence, an aborted transmission can result in a watchdog timeout. This problem can be reproduced on congested link, as that can result in excessive transmitter collisions. Another way to reproduce this is with a FIFO Underrun, which may be caused by DMA latency. In event of a TXER interrupt, prevent a watchdog timeout by restarting transmission. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by:Stan Johnson <userm57@yahoo.com> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
Section 4.3.1 of the datasheet says, This bit [TXP] must not be set if a Load CAM operation is in progress (LCAM is set). The SONIC will lock up if both bits are set simultaneously. Testing has shown that the driver sometimes attempts to set LCAM while TXP is set. Avoid this by waiting for command completion before and after giving the LCAM command. After issuing the Load CAM command, poll for !SONIC_CR_LCAM rather than SONIC_INT_LCD, because the SONIC_CR_TXP bit can't be used until !SONIC_CR_LCAM. When in reset mode, take the opportunity to reset the CAM Enable register. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by: -
Finn Thain authored
There are several issues relating to command register usage during chip initialization. Firstly, the SONIC sometimes comes out of software reset with the Start Timer bit set. This gets logged as, macsonic macsonic eth0: sonic_init: status=24, i=101 Avoid this by giving the Stop Timer command earlier than later. Secondly, the loop that waits for the Read RRA command to complete has the break condition inverted. That's why the for loop iterates until its termination condition. Call the helper for this instead. Finally, give the Receiver Enable command after clearing interrupts, not before, to avoid the possibility of losing an interrupt. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by: -
Finn Thain authored
Make sure the SONIC's DMA engine is idle before altering the transmit and receive descriptors. Add a helper for this as it will be needed again. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by:
-
Finn Thain authored
As soon as the driver is finished with a receive buffer it allocs a new one and overwrites the corresponding RRA entry with a new buffer pointer. Problem is, the buffer pointer is split across two word-sized registers. It can't be updated in one atomic store. So this operation races with the chip while it stores received packets and advances its RRP register. This could result in memory corruption by a DMA write. Avoid this problem by adding buffers only at the location given by the RWP register, in accordance with the National Semiconductor datasheet. Re-factor this code into separate functions to calculate a RRA pointer and to update the RWP. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
After sonic_tx_timeout() calls sonic_init(), it can happen that sonic_rx() will subsequently encounter a receive descriptor with no flags set. Remove the comment that says that this can't happen. When giving a receive descriptor to the SONIC, clear the descriptor status field. That way, any rx descriptor with flags set can only be a newly received packet. Don't process a descriptor without the LPKT bit set. The buffer is still in use by the SONIC. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by:
-
Finn Thain authored
The while loop in sonic_rx() traverses the rx descriptor ring. It stops when it reaches a descriptor that the SONIC has not used. Each iteration advances the EOL flag so the SONIC can keep using more descriptors. Therefore, the while loop has no definite termination condition. The algorithm described in the National Semiconductor literature is quite different. It consumes descriptors up to the one with its EOL flag set (which will also have its "in use" flag set). All freed descriptors are then returned to the ring at once, by adjusting the EOL flags (and link pointers). Adopt the algorithm from datasheet as it's simpler, terminates quickly and avoids a lot of pointless descriptor EOL flag changes. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
The SONIC can sometimes advance its rx buffer pointer (RRP register) without advancing its rx descriptor pointer (CRDA register). As a result the index of the current rx descriptor may not equal that of the current rx buffer. The driver mistakenly assumes that they are always equal. This assumption leads to incorrect packet lengths and possible packet duplication. Avoid this by calling a new function to locate the buffer corresponding to a given descriptor. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
The tx_aborted_errors statistic should count packets flagged with EXD, EXC, FU, or BCM bits because those bits denote an aborted transmission. That corresponds to the bitmask 0x0446, not 0x0642. Use macros for these constants to avoid mistakes. Better to leave out FIFO Underruns (FU) as there's a separate counter for that purpose. Don't lump all these errors in with the general tx_errors counter as that's used for tx timeout events. On the rx side, don't count RDE and RBAE interrupts as dropped packets. These interrupts don't indicate a lost packet, just a lack of resources. When a lack of resources results in a lost packet, this gets reported in the rx_missed_errors counter (along with RFO events). Don't double-count rx_frame_errors and rx_crc_errors. Don't use the general rx_errors counter for events that already have special counters. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Tested-by:
-
Finn Thain authored
The driver accesses descriptor memory which is simultaneously accessed by the chip, so the compiler must not be allowed to re-order CPU accesses. sonic_buf_get() used 'volatile' to prevent that. sonic_buf_put() should have done so too but was overlooked. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
The chip can change a packet's descriptor status flags at any time. However, an active interrupt flag gets cleared rather late. This allows a race condition that could theoretically lose an interrupt. Fix this by clearing asserted interrupt flags immediately. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Finn Thain authored
The netif_stop_queue() call in sonic_send_packet() races with the netif_wake_queue() call in sonic_interrupt(). This causes issues like "NETDEV WATCHDOG: eth0 (macsonic): transmit queue 0 timed out". Fix this by disabling interrupts when accessing tx_skb[] and next_tx. Update a comment to clarify the synchronization properties. Fixes: efcce839 ("[PATCH] macsonic/jazzsonic network drivers update") Tested-by:
-
Madalin Bucur authored
As the only 10G PHY interface type defined at the moment the code was developed was XGMII, although the PHY interface mode used was not XGMII, XGMII was used in the code to denote 10G. This patch renames the 10G interface mode to remove the ambiguity. Signed-off-by:
Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by:
-
David S. Miller authored
Madalin Bucur says: ==================== net: fsl/fman: address erratum A011043 This addresses a HW erratum on some QorIQ DPAA devices. MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. When the issue was present, one could see such errors during boot: mdio_bus ffe4e5000: Error while reading PHY0 reg at 3.3 ==================== Signed-off-by: -
Madalin Bucur authored
When fsl,erratum-a011043 is set, adjust for erratum A011043: MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by:
-
Madalin Bucur authored
Add fsl,erratum-a011043 to internal MDIO buses. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by:
-
Madalin Bucur authored
Add an entry for erratum A011043: the MDIO_CFG[MDIO_RD_ER] bit may be falsely set when reading internal PCS registers. MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by:
-
Manish Chopra authored
Driver while collecting firmware dump takes longer time to collect/process some of the firmware dump entries/memories. Bigger capture masks makes it worse as it results in larger amount of data being collected and results in CPU soft lockup. Place cond_resched() in some of the driver flows that are expectedly time consuming to relinquish the CPU to avoid CPU soft lockup panic. Signed-off-by:
Shahed Shaikh <shshaikh@marvell.com> Tested-by:
Yonggen Xu <Yonggen.Xu@dell.com> Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
-
Kristian Evensen authored
When submitting v2 of "fou: Support binding FoU socket" (1713cb37), I accidentally sent the wrong version of the patch and one fix was missing. In the initial version of the patch, as well as the version 2 that I submitted, I incorrectly used ".type" for the two V6-attributes. The correct is to use ".len". Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: 1713cb37 ("fou: Support binding FoU socket") Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.5 Second set of fixes for v5.5. There are quite a few patches, especially on iwlwifi, due to me being on a long break. Libertas also has a security fix and mt76 a build fix. iwlwifi * don't send the PPAG command when PPAG is disabled, since it can cause problems * a few fixes for a HW bug * a fix for RS offload; * a fix for 3168 devices where the NVM tables where the wrong tables were being read * fix a couple of potential memory leaks in TXQ code * disable L0S states in all hardware since our hardware doesn't officially support them anymore (and older versions of the hardware had instability in these states) * remove lar_disable parameter since it has been causing issues for some people who erroneously disable it * force the debug monitor HW to stop also when debug is disabled, since it sometimes stays on and prevents low system power states * don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems libertas * fix two buffer overflows mt76 * build fix related to CONFIG_MT76_LEDS * fix off by one in bitrates handling ==================== Signed-off-by:
-
Eric Dumazet authored
If both IFF_NAPI_FRAGS mode and XDP are enabled, and the XDP program consumes the skb, we need to clear the napi.skb (or risk a use-after-free) and release the mutex (or risk a deadlock) WARNING: lock held when returning to user space! 5.5.0-rc6-syzkaller #0 Not tainted ------------------------------------------------ syz-executor.0/455 is leaving the kernel with locks still held! 1 lock held by syz-executor.0/455: #0: ffff888098f6e748 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x1604/0x3fc0 drivers/net/tun.c:1835 Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by:syzbot <syzkaller@googlegroups.com> Cc: Petar Penkov <ppenkov@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Ido Schimmel authored
During reload (or module unload), the router block is de-initialized. Among other things, this results in the removal of a default multicast route from each active virtual router (VRF). These default routes are configured during initialization to trap packets to the CPU. In Spectrum-2, unlike Spectrum-1, multicast routes are implemented using ACL rules. Since the router block is de-initialized before the ACL block, it is possible that the ACL rules corresponding to the default routes are deleted while being accessed by the ACL delayed work that queries rules' activity from the device. This can result in a rare use-after-free [1]. Fix this by protecting the rules list accessed by the delayed work with a lock. We cannot use a spinlock as the activity read operation is blocking. [1] [ 123.331662] ================================================================== [ 123.339920] BUG: KASAN: use-after-free in mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0 [ 123.349381] Read of size 8 at addr ffff8881f3bb4520 by task kworker/0:2/78 [ 123.357080] [ 123.358773] CPU: 0 PID: 78 Comm: kworker/0:2 Not tainted 5.5.0-rc5-custom-33108-gf5df95d3ef41 #2209 [ 123.368898] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 [ 123.378456] Workqueue: mlxsw_core mlxsw_sp_acl_rule_activity_update_work [ 123.385970] Call Trace: [ 123.388734] dump_stack+0xc6/0x11e [ 123.392568] print_address_description.constprop.4+0x21/0x340 [ 123.403236] __kasan_report.cold.8+0x76/0xb1 [ 123.414884] kasan_report+0xe/0x20 [ 123.418716] mlxsw_sp_acl_rule_activity_update_work+0x330/0x3b0 [ 123.444034] process_one_work+0xb06/0x19a0 [ 123.453731] worker_thread+0x91/0xe90 [ 123.467348] kthread+0x348/0x410 [ 123.476847] ret_from_fork+0x24/0x30 [ 123.480863] [ 123.482545] Allocated by task 73: [ 123.486273] save_stack+0x19/0x80 [ 123.490000] __kasan_kmalloc.constprop.6+0xc1/0xd0 [ 123.495379] mlxsw_sp_acl_rule_create+0xa7/0x230 [ 123.500566] mlxsw_sp2_mr_tcam_route_create+0xf6/0x3e0 [ 123.506334] mlxsw_sp_mr_tcam_route_create+0x5b4/0x820 [ 123.512102] mlxsw_sp_mr_table_create+0x3b5/0x690 [ 123.517389] mlxsw_sp_vr_get+0x289/0x4d0 [ 123.521797] mlxsw_sp_fib_node_get+0xa2/0x990 [ 123.526692] mlxsw_sp_router_fib4_event_work+0x54c/0x2d60 [ 123.532752] process_one_work+0xb06/0x19a0 [ 123.537352] worker_thread+0x91/0xe90 [ 123.541471] kthread+0x348/0x410 [ 123.545103] ret_from_fork+0x24/0x30 [ 123.549113] [ 123.550795] Freed by task 518: [ 123.554231] save_stack+0x19/0x80 [ 123.557958] __kasan_slab_free+0x125/0x170 [ 123.562556] kfree+0xd7/0x3a0 [ 123.565895] mlxsw_sp_acl_rule_destroy+0x63/0xd0 [ 123.571081] mlxsw_sp2_mr_tcam_route_destroy+0xd5/0x130 [ 123.576946] mlxsw_sp_mr_tcam_route_destroy+0xba/0x260 [ 123.582714] mlxsw_sp_mr_table_destroy+0x1ab/0x290 [ 123.588091] mlxsw_sp_vr_put+0x1db/0x350 [ 123.592496] mlxsw_sp_fib_node_put+0x298/0x4c0 [ 123.597486] mlxsw_sp_vr_fib_flush+0x15b/0x360 [ 123.602476] mlxsw_sp_router_fib_flush+0xba/0x470 [ 123.607756] mlxsw_sp_vrs_fini+0xaa/0x120 [ 123.612260] mlxsw_sp_router_fini+0x137/0x384 [ 123.617152] mlxsw_sp_fini+0x30a/0x4a0 [ 123.621374] mlxsw_core_bus_device_unregister+0x159/0x600 [ 123.627435] mlxsw_devlink_core_bus_device_reload_down+0x7e/0xb0 [ 123.634176] devlink_reload+0xb4/0x380 [ 123.638391] devlink_nl_cmd_reload+0x610/0x700 [ 123.643382] genl_rcv_msg+0x6a8/0xdc0 [ 123.647497] netlink_rcv_skb+0x134/0x3a0 [ 123.651904] genl_rcv+0x29/0x40 [ 123.655436] netlink_unicast+0x4d4/0x700 [ 123.659843] netlink_sendmsg+0x7c0/0xc70 [ 123.664251] __sys_sendto+0x265/0x3c0 [ 123.668367] __x64_sys_sendto+0xe2/0x1b0 [ 123.672773] do_syscall_64+0xa0/0x530 [ 123.676892] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 123.682552] [ 123.684238] The buggy address belongs to the object at ffff8881f3bb4500 [ 123.684238] which belongs to the cache kmalloc-128 of size 128 [ 123.698261] The buggy address is located 32 bytes inside of [ 123.698261] 128-byte region [ffff8881f3bb4500, ffff8881f3bb4580) [ 123.711303] The buggy address belongs to the page: [ 123.716682] page:ffffea0007ceed00 refcount:1 mapcount:0 mapping:ffff888236403500 index:0x0 [ 123.725958] raw: 0200000000000200 dead000000000100 dead000000000122 ffff888236403500 [ 123.734646] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 123.743315] page dumped because: kasan: bad access detected [ 123.749562] [ 123.751241] Memory state around the buggy address: [ 123.756620] ffff8881f3bb4400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 123.764716] ffff8881f3bb4480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 123.772812] >ffff8881f3bb4500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 123.780904] ^ [ 123.785697] ffff8881f3bb4580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 123.793793] ffff8881f3bb4600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 123.801883] ================================================================== Fixes: cf7221a4 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
David S. Miller authored
Hayes Wang says: ==================== r8152: serial fixes v3: 1. Fix the typos for patch #5 and #6. 2. Modify the commit message of patch #9. v2: For patch #2, move declaring the variable "ocp_data". v1: These patches are used to fix some issues for RTL8153. ==================== Signed-off-by: -
Hayes Wang authored
When enabling this, the device would wait an internal signal which wouldn't be triggered. Then, the device couldn't enter P3 mode, so the power consumption is increased. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
-
