The userptr put_pages can be called from inside try_to_unmap, and so
enters with the page lock held on one of the object's backing pages. We
cannot take the page lock ourselves for fear of recursion.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reported-by: Martin Wilck <Martin.Wilck@suse.com>
Reported-by: Leo Kraav <leho@kraav.com>
Fixes: aa56a292 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: https://bugzilla.kernel.org/show_bug.cgi?id=203317Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull clone3 fix from Christian Brauner:
 "This is a last-minute bugfix for clone3() that should go in before we
  release 5.3 with clone3().

  clone3() did not verify that the exit_signal argument was set to a
  valid signal. This can be used to cause a crash by specifying a signal
  greater than NSIG. e.g. -1.

  The commit from Eugene adds a check to copy_clone_args_from_user() to
  verify that the exit signal is limited by CSIGNAL as with legacy
  clone() and that the signal is valid. With this we don't get the
  legacy clone behavior were an invalid signal could be handed down and
  would only be detected and then ignored in do_notify_parent(). Users
  of clone3() will now get a proper error right when they pass an
  invalid exit signal. Note, that this is not a change in user-visible
  behavior since no kernel with clone3() has been released yet"

* tag 'for-linus-20190912' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  fork: block invalid exit signals with clone3()

Pull x86 fixes from Ingo Molnar:
 "A KVM guest fix, and a kdump kernel relocation errors fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/timer: Force PIT initialization when !X86_FEATURE_ARAT
  x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors

Previously, higher 32 bits of exit_signal fields were lost when copied
to the kernel args structure (that uses int as a type for the respective
field). Moreover, as Oleg has noted, exit_signal is used unchecked, so
it has to be checked for sanity before use; for the legacy syscalls,
applying CSIGNAL mask guarantees that it is at least non-negative;
however, there's no such thing is done in clone3() code path, and that
can break at least thread_group_leader.

This commit adds a check to copy_clone_args_from_user() to verify that
the exit signal is limited by CSIGNAL as with legacy clone() and that
the signal is valid. With this we don't get the legacy clone behavior
were an invalid signal could be handed down and would only be detected
and ignored in do_notify_parent(). Users of clone3() will now get a
proper error when they pass an invalid exit signal. Note, that this is
not user-visible behavior since no kernel with clone3() has been
released yet.

The following program will cause a splat on a non-fixed clone3() version
and will fail correctly on a fixed version:

 #define _GNU_SOURCE
 #include <linux/sched.h>
 #include <linux/types.h>
 #include <sched.h>
 #include <stdio.h>
 #include <stdlib.h>
 #include <sys/syscall.h>
 #include <sys/wait.h>
 #include <unistd.h>

 int main(int argc, char *argv[])
 {
        pid_t pid = -1;
        struct clone_args args = {0};
        args.exit_signal = -1;

        pid = syscall(__NR_clone3, &args, sizeof(struct clone_args));
        if (pid < 0)
                exit(EXIT_FAILURE);

        if (pid == 0)
                exit(EXIT_SUCCESS);

        wait(NULL);

        exit(EXIT_SUCCESS);
 }

Fixes: 7f192e3c ("fork: add clone3")
Reported-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Link: https://lore.kernel.org/r/4b38fa4ce420b119a4c6345f42fe3cec2de9b0b5.1568223594.git.esyr@redhat.com
[christian.brauner@ubuntu.com: simplify check and rework commit message]
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>

Pull virtio fixes from Michael Tsirkin:
 "Last minute bugfixes.

  A couple of security things.

  And an error handling bugfix that is never encountered by most people,
  but that also makes it kind of safe to push at the last minute, and it
  helps push the fix to stable a bit sooner"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: make sure log_num < in_num
  vhost: block speculation of translated descriptors
  virtio_ring: fix unmap of indirect descriptors

Pull perf fix from Ingo Molnar:
 "Fix an initialization bug in the hw-breakpoints, which triggered on
  the ARM platform"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/hw_breakpoint: Fix arch_hw_breakpoint use-before-initialization

Pull irq fix from Ingo Molnar:
 "Fix a race in the IRQ resend mechanism, which can result in a NULL
  dereference crash"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Prevent NULL pointer dereference in resend_irqs()

Pull pin control fix from Linus Walleij:
 "Hopefully last pin control fix: a single patch for some Aspeed
  problems. The BMCs are much happier now"

* tag 'pinctrl-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: aspeed: Fix spurious mux failures on the AST2500

Pull GPIO fixes from Linus Walleij:
 "I don't really like to send so many fixes at the very last minute, but
  the bug-sport activity is unpredictable.

  Four fixes, three are -stable material that will go everywhere, one is
  for the current cycle:

   - An ACPI DSDT error fixup of the type we always see and Hans
     invariably gets to fix.

   - A OF quirk fix for the current release (v5.3)

   - Some consistency checks on the userspace ABI.

   - A memory leak"

* tag 'gpio-v5.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist
  gpiolib: of: fix fallback quirks handling
  gpio: fix line flag validation in lineevent_create
  gpio: fix line flag validation in linehandle_create
  gpio: mockup: add missing single_release()

Commit 674fa8da ("pinctrl: aspeed-g5: Delay acquisition of regmaps")
was determined to be a partial fix to the problem of acquiring the LPC
Host Controller and GFX regmaps: The AST2500 pin controller may need to
fetch syscon regmaps during expression evaluation as well as when
setting mux state. For example, this case is hit by attempting to export
pins exposing the LPC Host Controller as GPIOs.

An optional eval() hook is added to the Aspeed pinmux operation struct
and called from aspeed_sig_expr_eval() if the pointer is set by the
SoC-specific driver. This enables the AST2500 to perform the custom
action of acquiring its regmap dependencies as required.

John Wang tested the fix on an Inspur FP5280G2 machine (AST2500-based)
where the issue was found, and I've booted the fix on Witherspoon
(AST2500) and Palmetto (AST2400) machines, and poked at relevant pins
under QEMU by forcing mux configurations via devmem before exporting
GPIOs to exercise the driver.

Fixes: 7d29ed88 ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers")
Fixes: 674fa8da ("pinctrl: aspeed-g5: Delay acquisition of regmaps")
Reported-by: John Wang <wangzqbj@inspur.com>
Tested-by: John Wang <wangzqbj@inspur.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>

Link: https://lore.kernel.org/r/20190829071738.2523-1-andrew@aj.id.auSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The code assumes log_num < in_num everywhere, and that is true as long as
in_num is incremented by descriptor iov count, and log_num by 1. However
this breaks if there's a zero sized descriptor.

As a result, if a malicious guest creates a vring desc with desc.len = 0,
it may cause the host kernel to crash by overflowing the log array. This
bug can be triggered during the VM migration.

There's no need to log when desc.len = 0, so just don't increment log_num
in this case.

Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server")
Cc: stable@vger.kernel.org
Reviewed-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: ruippan <ruippan@tencent.com>
Signed-off-by: yongduan <yongduan@tencent.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

iovec addresses coming from vhost are assumed to be
pre-validated, but in fact can be speculated to a value
out of range.

Userspace address are later validated with array_index_nospec so we can
be sure kernel info does not leak through these addresses, but vhost
must also not leak userspace info outside the allowed memory table to
guests.

Following the defence in depth principle, make sure
the address is not validated out of node range.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Jason Wang <jasowang@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>

Another day; another DSDT bug we need to workaround...

Since commit ca876c74 ("gpiolib-acpi: make sure we trigger edge events
at least once on boot") we call _AEI edge handlers at boot.

In some rare cases this causes problems. One example of this is the Minix
Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy
and pasted code for dealing with Micro USB-B connector host/device role
switching, while the mini PC does not even have a micro-USB connector.
This code, which should not be there, messes with the DDC data pin from
the HDMI connector (switching it to GPIO mode) breaking HDMI support.

To avoid problems like this, this commit adds a new
gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which
allows disabling the running of _AEI edge event handlers at boot.

The default value is -1/auto which uses a DMI based blacklist, the initial
version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage.

Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Reported-by: Ian W MORRISON <ianwmorrison@gmail.com>
Suggested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Fixes: ca876c74 ("gpiolib-acpi: make sure we trigger edge events at least once on boot")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20190827202835.213456-1-hdegoede@redhat.comAcked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull ipc regression fixes from Arnd Bergmann:
 "Fix ipc regressions from y2038 patches

  These are two regression fixes for bugs that got introduced during the
  system call rework that went into linux-5.1 but only bisected and
  fixed now:

   - One patch affects semtimedop() on many of the less common 32-bit
     architectures, this just needs a single-line bugfix.

   - The other affects only sparc64 and has a slightly more invasive
     workaround to apply the same change to sparc64 that was done to the
     generic code used everywhere else"

* tag 'ipc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  ipc: fix sparc64 ipc() wrapper
  ipc: fix semtimedop for generic 32-bit architectures

We should only try to execute fallback quirks handling when previous
call returned -ENOENT, and not when we did not get -EPROBE_DEFER.
The other errors should be treated as hard errors: we did find the GPIO
description, but for some reason we failed to handle it properly.

The fallbacks should only be executed when previous handlers returned
-ENOENT, which means the mapping/description was not found.

Also let's remove the explicit deferral handling when iterating through
GPIO suffixes: it is not needed anymore as we will not be calling
fallbacks for anything but -ENOENT.

Fixes: df451f83 ("gpio: of: fix Freescale SPI CS quirk handling")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20190903231856.GA165165@dtor-wsReviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'gpio-v5.4-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes

gpio: fixes for v5.4

- fix a memory leak in gpio-mockup
- fix two flag validation bugs in gpiolib's character device ioctl()'s

Merge tag 'regulator-fix-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "This is obviouly very late, containing three small and simple driver
  specific fixes.

  The main one is the TWL fix, this fixes issues with cpufreq on the
  PMICs used with BeagleBoard generation OMAP SoCs which had been broken
  due to changes in the generic OPP code exposing a bug in the regulator
  driver for these devices causing them to think that OPPs weren't
  supported on the system.

  Sorry about sending this so late, I hadn't registered that the TWL
  issue manifested in cpufreq"

* tag 'regulator-fix-v5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: twl: voltage lists for vdd1/2 on twl4030
  regulator: act8945a-regulator: fix ldo register addresses in set_mode hook
  regulator: slg51000: Fix a couple NULL vs IS_ERR() checks

The function virtqueue_add_split() DMA-maps the scatterlist buffers. In
case a mapping error occurs the already mapped buffers must be unmapped.
This happens by jumping to the 'unmap_release' label.

In case of indirect descriptors the release is wrong and may leak kernel
memory. Because the implementation assumes that the head descriptor is
already mapped it starts iterating over the descriptor list starting
from the head descriptor. However for indirect descriptors the head
descriptor is never mapped in case of an error.

The fix is to initialize the start index with zero in case of indirect
descriptors and use the 'desc' pointer directly for iterating over the
descriptor chain.
Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT,
GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set.

Fixes: d7c51b47 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT
and GPIOHANDLE_REQUEST_OUTPUT to be set.

Fixes: d7c51b47 ("gpio: userspace ABI for reading/writing GPIO lines")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

When using single_open() for opening, single_release() should be
used instead of seq_release(), otherwise there is a memory leak.

Fixes: 2a9e2740 ("gpio: mockup: rework debugfs interface")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Pull section attribute fix from Miguel Ojeda:
 "Fix Oops in Clang-compiled kernels (Nick Desaulniers)"

* tag 'compiler-attributes-for-linus-v5.3-rc8' of git://github.com/ojeda/linux:
  include/linux/compiler.h: fix Oops for Clang-compiled kernels

Pull GPIO fixes from Linus Walleij:
 "All related to the PCA953x driver when handling chips with more than 8
  ports, now that works again"

* tag 'gpio-v5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: use pca953x_read_regs instead of regmap_bulk_read
  gpio: pca953x: correct type of reg_direction

GCC unescapes escaped string section names while Clang does not. Because
__section uses the `#` stringification operator for the section name, it
doesn't need to be escaped.

This fixes an Oops observed in distro's that use systemd and not
net.core.bpf_jit_enable=1, when their kernels are compiled with Clang.

Link: https://github.com/ClangBuiltLinux/linux/issues/619
Link: https://bugs.llvm.org/show_bug.cgi?id=42950
Link: https://marc.info/?l=linux-netdev&m=156412960619946&w=2
Link: https://lore.kernel.org/lkml/20190904181740.GA19688@gmail.com/Acked-by: Will Deacon <will@kernel.org>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
[Cherry-picked from the __section cleanup series for 5.3]
[Adjusted commit message]
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>

KVM guests with commit c8c40767 ("x86/timer: Skip PIT initialization on
modern chipsets") applied to guest kernel have been observed to have
unusually higher CPU usage with symptoms of increase in vm exits for HLT
and MSW_WRITE (MSR_IA32_TSCDEADLINE).

This is caused by older QEMUs lacking support for X86_FEATURE_ARAT.  lapic
clock retains CLOCK_EVT_FEAT_C3STOP and nohz stays inactive.  There's no
usable broadcast device either.

Do the PIT initialization if guest CPU lacks X86_FEATURE_ARAT.  On real
hardware it shouldn't matter as ARAT and DEADLINE come together.

Fixes: c8c40767 ("x86/timer: Skip PIT initialization on modern chipsets")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This reverts commit 558682b5.

Chris Wilson reports that it breaks his CPU hotplug test scripts.  In
particular, it breaks offlining and then re-onlining the boot CPU, which
we treat specially (and the BIOS does too).

The symptoms are that we can offline the CPU, but it then does not come
back online again:

    smpboot: CPU 0 is now offline
    smpboot: Booting Node 0 Processor 0 APIC 0x0
    smpboot: do_boot_cpu failed(-1) to wakeup CPU#0

Thomas says he knows why it's broken (my personal suspicion: our magic
handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix
is to just revert it, since we've never touched the LDR bits before, and
it's not worth the risk to do anything else at this stage.

[ Hotpluging of the boot CPU is special anyway, and should be off by
  default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the
  cpu0_hotplug kernel parameter.

  In general you should not do it, and it has various known limitations
  (hibernate and suspend require the boot CPU, for example).

  But it should work, even if the boot CPU is special and needs careful
  treatment       - Linus ]

Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bandan Das <bsd@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Matt bisected a sparc64 specific issue with semctl, shmctl and msgctl
to a commit from my y2038 series in linux-5.1, as I missed the custom
sys_ipc() wrapper that sparc64 uses in place of the generic version that
I patched.

The problem is that the sys_{sem,shm,msg}ctl() functions in the kernel
now do not allow being called with the IPC_64 flag any more, resulting
in a -EINVAL error when they don't recognize the command.

Instead, the correct way to do this now is to call the internal
ksys_old_{sem,shm,msg}ctl() functions to select the API version.

As we generally move towards these functions anyway, change all of
sparc_ipc() to consistently use those in place of the sys_*() versions,
and move the required ksys_*() declarations into linux/syscalls.h

The IS_ENABLED(CONFIG_SYSVIPC) check is required to avoid link
errors when ipc is disabled.
Reported-by: Matt Turner <mattst88@gmail.com>
Fixes: 275f2214 ("ipc: rename old-style shmctl/semctl/msgctl syscalls")
Cc: stable@vger.kernel.org
Tested-by: Matt Turner <mattst88@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull Documentation updates from Greg KH:
 "A few small patches for the documenation file that came in through the
  char-misc tree in -rc7 for your tree.

  They fix the mistake in the .rst format that kept the table of
  companies from showing up in the html output, and most importantly,
  add people's names to the list showing support for our process"

* tag 'char-misc-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Documentation/process: Add Qualcomm process ambassador for hardware security issues
  Documentation/process/embargoed-hardware-issues: Microsoft ambassador
  Documentation/process: Add Google contact for embargoed hardware issues
  Documentation/process: Volunteer as the ambassador for Xen

Add Trilok Soni as process ambassador for hardware security issues
from Qualcomm.
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Link: https://lore.kernel.org/r/1567796517-8964-1-git-send-email-tsoni@codeaurora.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull dmaengine fixes from Vinod Koul:
 "Some late fixes for drivers:

   - memory leak in ti crossbar dma driver

   - cleanup of omap dma probe

   - Fix for link list configuration in sprd dma driver

   - Handling fixed for DMACHCLR if iommu is mapped in rcar dma"

* tag 'dmaengine-fix-5.3' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: rcar-dmac: Fix DMACHCLR handling if iommu is mapped
  dmaengine: sprd: Fix the DMA link-list configuration
  dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()
  dmaengine: ti: dma-crossbar: Fix a memory leak bug

Pull SCSI fix from James Bottomley:
 "Just a single lpfc fix adjusting the number of available queues for
  high CPU count systems"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: lpfc: Raise config max for lpfc_fcp_mq_threshold variable

Pull libnvdimm fix from Dan Williams:
 "Restore support for 1GB alignment namespaces, truncate the end of
  misaligned namespaces"

* tag 'libnvdimm-fix-5.3-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm/pfn: Fix namespace creation on misaligned addresses

Pull input fix from Dmitry Torokhov:
 "A tiny update from Benjamin removing a mistakenly added Elan PNP ID so
  that the device is again handled by hid-multitouch"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - remove Lenovo Legion Y7000 PnpID

Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B
when the actual device is supposed to be used with hid-multitouch.

Remove it from the list of the supported device, hoping that
no one will complain about the loss in functionality.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203467
Fixes: 738c06d0 ("Input: elan_i2c - add hardware ID for multiple Lenovo laptops")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull ARM SoC fixes from Arnd Bergmann:
 "There are three more fixes for this week:

   - The Windows-on-ARM laptops require a workaround to prevent crashing
     at boot from ACPI

   - The Renesas 'draak' board needs one bugfix for the backlight
     regulator

   - Also for Renesas, the 'hihope' board accidentally had its eMMC
     turned off in the 5.3 merge window"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  soc: qcom: geni: Provide parameter error checking
  arm64: dts: renesas: hihope-common: Fix eMMC status
  arm64: dts: renesas: r8a77995: draak: Fix backlight regulator name

As Vincent noticed, the y2038 conversion of semtimedop in linux-5.1
broke when commit 00bf25d6 ("y2038: use time32 syscall names on
32-bit") changed all system calls on all architectures that take
a 32-bit time_t to point to the _time32 implementation, but left out
semtimedop in the asm-generic header.

This affects all 32-bit architectures using asm-generic/unistd.h:
h8300, unicore32, openrisc, nios2, hexagon, c6x, arc, nds32 and csky.

The notable exception is riscv32, which has dropped support for the
time32 system calls entirely.
Reported-by: Vincent Chen <deanbo422@gmail.com>
Cc: stable@vger.kernel.org
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Guo Ren <guoren@kernel.org>
Fixes: 00bf25d6 ("y2038: use time32 syscall names on 32-bit")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull configfs fixes from Christoph Hellwig:
 "Late configfs fixes from Al that fix pretty nasty removal vs attribute
  access races"

* tag 'configfs-for-5.3' of git://git.infradead.org/users/hch/configfs:
  configfs: provide exclusion between IO and removals
  configfs: new object reprsenting tree fragments
  configfs_register_group() shouldn't be (and isn't) called in rmdirable parts
  configfs: stash the data we need into configfs_buffer at open time

Pull IOMMU fixes from Joerg Roedel:

 - Revert an Intel VT-d patch that caused problems for some users.

 - Removal of a feature in the Intel VT-d driver that was never
   supported in hardware. This qualifies as a fix because the code for
   this feature sets reserved bits in the invalidation queue descriptor,
   causing failed invalidations on real hardware.

 - Two fixes for AMD IOMMU driver to fix a race condition and to add a
   missing IOTLB flush when kernel is booted in kdump mode.

* tag 'iommu-fixes-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix race in increase_address_space()
  iommu/amd: Flush old domains in kdump kernel
  iommu/vt-d: Remove global page flush support
  Revert "iommu/vt-d: Avoid duplicated pci dma alias consideration"

Pull MMC fix from Ulf Hansson:
 "Revert in order to fix card init for some eMMCs that need retries for
  CMD6"

* tag 'mmc-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  Revert "mmc: core: do not retry CMD6 in __mmc_switch()"