No need to use two strcmp calls per syscall entry, do it just once, when
reading the per syscall info.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lymtxhz0mg3adyt5e2pssn8f@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The thread->priv value is already obtained a few lines earlier from the
thread__trace() call. Leftovers from before thread__trace().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-96laa634vzfwlwxurevo40wp@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Minor hint to speed up problem resolution and get 'trace' working for
non root users.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-abdqi8km4fj9osrn70q2zj9v@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There was a brown paper bag bug in the patch that introduced a reference
implementation on using 'perf probe' made wannabe tracepoints that broke fd ->
pathname resolution, fix it:

  [root@zoo ~]# perf probe 'vfs_getname=getname_flags:65 pathname=result->name:string'
  Added new event:
    probe:vfs_getname    (on getname_flags:65 with pathname=result->name:string)

  You can now use it in all perf tools, such as:

	perf record -e probe:vfs_getname -aR sleep 1

  [root@zoo ~]

Before:

  [acme@zoo linux]$ trace touch -e open,fstat /tmp/b
     1.159 ( 0.007 ms): open(filename: 0x7fd73f2fe088, flags: CLOEXEC                         ) = 3
     1.163 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fff1b25e610                                  ) = 0
     1.192 ( 0.009 ms): open(filename: 0x7fd73f4fedb8, flags: CLOEXEC                         ) = 3
     1.201 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fff1b25e660                                  ) = 0
     1.501 ( 0.013 ms): open(filename: 0x7fd73f0a1610, flags: CLOEXEC                         ) = 3
     1.505 ( 0.002 ms): fstat(fd: 3, statbuf: 0x7fd73f2ddb60                                  ) = 0
     1.581 ( 0.011 ms): open(filename: 0x7fff1b2603da, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3
  [acme@zoo linux]$

After:

  [acme@zoo linux]$ trace touch -e open,fstat,dup2,mmap,close /tmp/b
     1.105 ( 0.004 ms): mmap(len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1    ) = 0x2fbf000
     1.136 ( 0.008 ms): open(filename: 0x7f8902dbc088, flags: CLOEXEC                         ) = 3
     1.140 ( 0.002 ms): fstat(fd: 3</etc/ld.so.cache>, statbuf: 0x7fff19889ef0                ) = 0
     1.146 ( 0.004 ms): mmap(len: 86079, prot: READ, flags: PRIVATE, fd: 3</etc/ld.so.cache>  ) = 0x2fa9000
     1.149 ( 0.001 ms): close(fd: 3</etc/ld.so.cache>                                         ) = 0
     1.170 ( 0.010 ms): open(filename: 0x7f8902fbcdb8, flags: CLOEXEC                         ) = 3
     1.178 ( 0.002 ms): fstat(fd: 3</lib64/libc.so.6>, statbuf: 0x7fff19889f40                ) = 0
     1.188 ( 0.006 ms): mmap(len: 3924576, prot: EXEC|READ, flags: PRIVATE|DENYWRITE, fd: 3</lib64/libc.so.6>) = 0x29e2000
     1.207 ( 0.007 ms): mmap(addr: 0x7f8902d96000, len: 24576, prot: READ|WRITE, flags: PRIVATE|DENYWRITE|FIXED, fd: 3</lib64/libc.so.6>, off: 1785856) = 0x2d96000
     1.217 ( 0.004 ms): mmap(addr: 0x7f8902d9c000, len: 16992, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS|FIXED, fd: -1) = 0x2d9c000
     1.228 ( 0.002 ms): close(fd: 3</lib64/libc.so.6>                                         ) = 0
     1.243 ( 0.003 ms): mmap(len: 4096, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1    ) = 0x2fa8000
     1.250 ( 0.003 ms): mmap(len: 8192, prot: READ|WRITE, flags: PRIVATE|ANONYMOUS, fd: -1    ) = 0x2fa6000
     1.452 ( 0.010 ms): open(filename: 0x7f8902b5f610, flags: CLOEXEC                         ) = 3
     1.455 ( 0.002 ms): fstat(fd: 3</usr/lib/locale/locale-archive>, statbuf: 0x7f8902d9bb60  ) = 0
     1.461 ( 0.004 ms): mmap(len: 106070960, prot: READ, flags: PRIVATE, fd: 3</usr/lib/locale/locale-archive>) = 0xfc4b9000
     1.469 ( 0.002 ms): close(fd: 3</usr/lib/locale/locale-archive>                           ) = 0
     1.528 ( 0.010 ms): open(filename: 0x7fff1988c3da, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: 438) = 3
     1.532 ( 0.002 ms): dup2(oldfd: 3</tmp/b>                                                 ) = 0
     1.535 ( 0.001 ms): close(fd: 3</tmp/b>                                                   ) = 0
     1.544 ( 0.001 ms): close(                                                                ) = 0
     1.555 ( 0.001 ms): close(fd: 1                                                           ) = 0
     1.558 ( 0.001 ms): close(fd: 2                                                           ) = 0
  [acme@zoo linux]$

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vcm22xpjxc3j4hbyuzjzf7ik@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for
failing a sampling event when no PMU interrupt is available.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-sh@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150205300.16738@vincent-weaver-1.umelst.maine.eduSigned-off-by: Ingo Molnar <mingo@kernel.org>

Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for
failing a sampling event when no PMU interrupt is available.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150204290.16738@vincent-weaver-1.umelst.maine.eduSigned-off-by: Ingo Molnar <mingo@kernel.org>

Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for
failing a sampling event when no PMU interrupt is available.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-metag@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150202050.16738@vincent-weaver-1.umelst.maine.eduSigned-off-by: Ingo Molnar <mingo@kernel.org>

Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for
failing a sampling event when no PMU interrupt is available.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Miao <realmz6@gmail.com>
Cc: adi-buildroot-devel@lists.sourceforge.net
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150200360.16738@vincent-weaver-1.umelst.maine.eduSigned-off-by: Ingo Molnar <mingo@kernel.org>

Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for
failing a sampling event when no PMU interrupt is available.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Rob Herring <robh+dt@kernel.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150159280.16738@vincent-weaver-1.umelst.maine.eduSigned-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

This essentially reverts commit:

  ecd50f71 ("kprobes, x86: Call exception_enter after kprobes handled")

since it causes build errors with CONFIG_CONTEXT_TRACKING and
that has been made from misunderstandings;
context_track_user_*() don't involve much in interrupt context,
it just returns if in_interrupt() is true.

Instead of changing the do_debug/int3(), this just adds
context_track_user_*() to kprobes blacklist, since those are
still can be called right before kprobes handles int3 and debug
exceptions, and probing those will cause an infinite loop.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/20140614064711.7865.45957.stgit@kbuild-fedora.novalocalSigned-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core

Pull perf/core improvements and fixes from Jiri Olsa:

  * Honor user freq/interval properly in record command (Namhyung Kim)

  * Speedup DWARF unwind (Jiri Olsa)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Add support for T10 PI pass-through between vhost-scsi +
     virtio-scsi (MST + Paolo + MKP + nab)
   - Add support for T10 PI in qla2xxx target mode (Quinn + MKP + hch +
     nab, merged through scsi.git)
   - Add support for percpu-ida pre-allocation in qla2xxx target code
     (Quinn + nab)
   - A number of iser-target fixes related to hardening the network
     portal shutdown path (Sagi + Slava)
   - Fix response length residual handling for a number of control CDBs
     (Roland + Christophe V.)
   - Various iscsi RFC conformance fixes in the CHAP authentication path
     (Tejas and Calsoft folks + nab)
   - Return TASK_SET_FULL status for tcm_fc(FCoE) DataIn + Response
     failures (Vasu + Jun + nab)
   - Fix long-standing ABORT_TASK + session reset hang (nab)
   - Convert iser-initiator + iser-target to include T10 bytes into EDTL
     (Sagi + Or + MKP + Mike Christie)
   - Fix NULL pointer dereference regression related to XCOPY introduced
     in v3.15 + CC'ed to v3.12.y (nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (34 commits)
  target: Fix NULL pointer dereference for XCOPY in target_put_sess_cmd
  vhost-scsi: Include prot_bytes into expected data transfer length
  TARGET/sbc,loopback: Adjust command data length in case pi exists on the wire
  libiscsi, iser: Adjust data_length to include protection information
  scsi_cmnd: Introduce scsi_transfer_length helper
  target: Report correct response length for some commands
  target/sbc: Check that the LBA and number of blocks are correct in VERIFY
  target/sbc: Remove sbc_check_valid_sectors()
  Target/iscsi: Fix sendtargets response pdu for iser transport
  Target/iser: Fix a wrong dereference in case discovery session is over iser
  iscsi-target: Fix ABORT_TASK + connection reset iscsi_queue_req memory leak
  target: Use complete_all for se_cmd->t_transport_stop_comp
  target: Set CMD_T_ACTIVE bit for Task Management Requests
  target: cleanup some boolean tests
  target/spc: Simplify INQUIRY EVPD=0x80
  tcm_fc: Generate TASK_SET_FULL status for response failures
  tcm_fc: Generate TASK_SET_FULL status for DataIN failures
  iscsi-target: Reject mutual authentication with reflected CHAP_C
  iscsi-target: Remove no-op from iscsit_tpg_del_portal_group
  iscsi-target: Fix CHAP_A parameter list handling
  ...

Pull kbuild misc updates from Michal Marek:
 "This is the non-critical part of kbuild for v3.16-rc1:
   - make deb-pkg can do s390x and arm64
   - new patterns in scripts/tags.sh
   - scripts/tags.sh skips userspace tools' sources (which sometimes
     have copies of kernel structures) and symlinks
   - improvements to the objdiff tool
   - two new coccinelle patches
   - other minor fixes"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts: objdiff: support directories for the augument of record command
  scripts: objdiff: fix a comment
  scripts: objdiff: change the extension of disassembly from .o to .dis
  scripts: objdiff: improve path flexibility for record command
  scripts: objdiff: remove unnecessary code
  scripts: objdiff: direct error messages to stderr
  scripts: objdiff: get the path to .tmp_objdiff more simply
  deb-pkg: Add automatic support for s390x architecture
  coccicheck: Add unneeded return variable test
  kbuild: Fix a typo in documentation
  kbuild: trivial - use tabs for code indent where possible
  kbuild: trivial - remove trailing empty lines
  coccinelle: Check for missing NULL terminators in of_device_id tables
  scripts/tags.sh: ignore symlink'ed source files
  scripts/tags.sh: add regular expression replacement pattern for memcg
  builddeb: add arm64 in the supported architectures
  builddeb: use $OBJCOPY variable instead of objcopy
  scripts/tags.sh: ignore code of user space tools
  scripts/tags.sh: add pattern for DEFINE_HASHTABLE
  .gitignore: ignore Module.symvers in all directories

Pull kbuild updates from Michal Marek:
 "Kbuild changes for v3.16-rc1:

   - cross-compilation fix so that cc-option is testing the right
     compiler
   - Fix for make defconfig all
   - Using relative paths to the object and source directory where
     possible, plus fixes for the fallout of the change
   - several cleanups in the Makefiles and scripts

  The powerpc fix is from today, because it was only discovered
  recently.  The rest has been in linux-next for some time"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  powerpc: Avoid circular dependency with zImage.%
  kbuild: create include/config directory in scripts/kconfig/Makefile
  kbuild: do not create include/linux directory
  Makefile: Fix unrecognized cross-compiler command line options
  kbuild: do not add "selinux" to subdir- twice
  um: Fix for relative objtree when generating x86 headers
  kbuild: Use relative path when building in a subdir of the source tree
  kbuild: Use relative path when building in the source tree
  kbuild: Use relative path for $(objtree)
  firmware: Use $(quote) in the Makefile
  firmware: Simplify directory creation
  kbuild: trivial - fix comment block indent
  kbuild: trivial - remove trailing spaces
  kbuild: support simultaneous "make %config" and "make all"
  kbuild: move extra gcc checks to scripts/Makefile.extrawarn

Pull tracing cleanups and bugfixes from Steven Rostedt:
 "One bug fix that goes back to 3.10.  Accessing a non existent buffer
  if "possible cpus" is greater than actual CPUs (including offline
  CPUs).

  Namhyung Kim did some reviews of the patches I sent this merge window
  and found a memory leak and had a few clean ups"

* tag 'trace-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix check of ftrace_trace_arrays list_empty() check
  tracing: Fix leak of per cpu max data in instances
  tracing: Cleanup saved_cmdlines_size changes
  ring-buffer: Check if buffer exists before polling

Pull more powerpc updates from Ben Herrenschmidt:
 "Here are the remaining bits I was mentioning earlier.  Mostly bug
  fixes and new selftests from Michael (yay !).  He also removed the WSP
  platform and A2 core support which were dead before release, so less
  clutter.

  One little "feature" I snuck in is the doorbell IPI support for
  non-virtualized P8 which speeds up IPIs significantly between threads
  of a core"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
  powerpc/book3s: Fix some ABIv2 issues in machine check code
  powerpc/book3s: Fix guest MC delivery mechanism to avoid soft lockups in guest.
  powerpc/book3s: Increment the mce counter during machine_check_early call.
  powerpc/book3s: Add stack overflow check in machine check handler.
  powerpc/book3s: Fix machine check handling for unhandled errors
  powerpc/eeh: Dump PE location code
  powerpc/powernv: Enable POWER8 doorbell IPIs
  powerpc/cpuidle: Only clear LPCR decrementer wakeup bit on fast sleep entry
  powerpc/powernv: Fix killed EEH event
  powerpc: fix typo 'CONFIG_PMAC'
  powerpc: fix typo 'CONFIG_PPC_CPU'
  powerpc/powernv: Don't escalate non-existing frozen PE
  powerpc/eeh: Report frozen parent PE prior to child PE
  powerpc/eeh: Clear frozen state for child PE
  powerpc/powernv: Reduce panic timeout from 180s to 10s
  powerpc/xmon: avoid format string leaking to printk
  selftests/powerpc: Add tests of PMU EBBs
  selftests/powerpc: Add support for skipping tests
  selftests/powerpc: Put the test in a separate process group
  selftests/powerpc: Fix instruction loop for ABIv2 (LE)
  ...

Merge tag 'blackfin-for-linus' of http://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux

Pull blackfin updates from Steven Miao.

* tag 'blackfin-for-linus' of http://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux:
  blackfin: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  Revert "blackfin: dma: current count mmr is read only"
  bf533: fix build error: add linux/gpio.h

Pull x86 irq fixes from Ingo Molnar:
 "Two changes: a cpu-hotplug/irq race fix, plus a HyperV related fix"

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Fix fixup_irqs() error handling
  x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately

Pull more scheduler updates from Ingo Molnar:
 "Second round of scheduler changes:
   - try-to-wakeup and IPI reduction speedups, from Andy Lutomirski
   - continued power scheduling cleanups and refactorings, from Nicolas
     Pitre
   - misc fixes and enhancements"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Delete extraneous extern for to_ratio()
  sched/idle: Optimize try-to-wake-up IPI
  sched/idle: Simplify wake_up_idle_cpu()
  sched/idle: Clear polling before descheduling the idle thread
  sched, trace: Add a tracepoint for IPI-less remote wakeups
  cpuidle: Set polling in poll_idle
  sched: Remove redundant assignment to "rt_rq" in update_curr_rt(...)
  sched: Rename capacity related flags
  sched: Final power vs. capacity cleanups
  sched: Remove remaining dubious usage of "power"
  sched: Let 'struct sched_group_power' care about CPU capacity
  sched/fair: Disambiguate existing/remaining "capacity" usage
  sched/fair: Change "has_capacity" to "has_free_capacity"
  sched/fair: Remove "power" from 'struct numa_stats'
  sched: Fix signedness bug in yield_to()
  sched/fair: Use time_after() in record_wakee()
  sched/balancing: Reduce the rate of needless idle load balancing
  sched/fair: Fix unlocked reads of some cfs_b->quota/period

Pull more perf updates from Ingo Molnar:
 "A second round of perf updates:

   - wide reaching kprobes sanitization and robustization, with the hope
     of fixing all 'probe this function crashes the kernel' bugs, by
     Masami Hiramatsu.

   - uprobes updates from Oleg Nesterov: tmpfs support, corner case
     fixes and robustization work.

   - perf tooling updates and fixes from Jiri Olsa, Namhyung Ki, Arnaldo
     et al:
        * Add support to accumulate hist periods (Namhyung Kim)
        * various fixes, refactorings and enhancements"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
  perf: Differentiate exec() and non-exec() comm events
  perf: Fix perf_event_comm() vs. exec() assumption
  uprobes/x86: Rename arch_uprobe->def to ->defparam, minor comment updates
  perf/documentation: Add description for conditional branch filter
  perf/x86: Add conditional branch filtering support
  perf/tool: Add conditional branch filter 'cond' to perf record
  perf: Add new conditional branch filter 'PERF_SAMPLE_BRANCH_COND'
  uprobes: Teach copy_insn() to support tmpfs
  uprobes: Shift ->readpage check from __copy_insn() to uprobe_register()
  perf/x86: Use common PMU interrupt disabled code
  perf/ARM: Use common PMU interrupt disabled code
  perf: Disable sampled events if no PMU interrupt
  perf: Fix use after free in perf_remove_from_context()
  perf tools: Fix 'make help' message error
  perf record: Fix poll return value propagation
  perf tools: Move elide bool into perf_hpp_fmt struct
  perf tools: Remove elide setup for SORT_MODE__MEMORY mode
  perf tools: Fix "==" into "=" in ui_browser__warning assignment
  perf tools: Allow overriding sysfs and proc finding with env var
  perf tools: Consider header files outside perf directory in tags target
  ...

Pull more locking changes from Ingo Molnar:
 "This is the second round of locking tree updates for v3.16, offering
  large system scalability improvements:

 - optimistic spinning for rwsems, from Davidlohr Bueso.

 - 'qrwlocks' core code and x86 enablement, from Waiman Long and PeterZ"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, locking/rwlocks: Enable qrwlocks on x86
  locking/rwlocks: Introduce 'qrwlocks' - fair, queued rwlocks
  locking/mutexes: Documentation update/rewrite
  locking/rwsem: Fix checkpatch.pl warnings
  locking/rwsem: Fix warnings for CONFIG_RWSEM_GENERIC_SPINLOCK
  locking/rwsem: Support optimistic spinning

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

Pull device mapper updates from Mike Snitzer:
 "This pull request is later than I'd have liked because I was waiting
  for some performance data to help finally justify sending the
  long-standing dm-crypt cpu scalability improvements upstream.

  Unfortunately we came up short, so those dm-crypt changes will
  continue to wait, but it seems we're not far off.

   . Add dm_accept_partial_bio interface to DM core to allow DM targets
     to only process a portion of a bio, the remainder being sent in the
     next bio.  This enables the old dm snapshot-origin target to only
     split write bios on chunk boundaries, read bios are now sent to the
     origin device unchanged.

   . Add DM core support for disabling WRITE SAME if the underlying SCSI
     layer disables it due to command failure.

   . Reduce lock contention in DM's bio-prison.

   . A few small cleanups and fixes to dm-thin and dm-era"

* tag 'dm-3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: update discard_granularity to reflect the thin-pool blocksize
  dm bio prison: implement per bucket locking in the dm_bio_prison hash table
  dm: remove symbol export for dm_set_device_limits
  dm: disable WRITE SAME if it fails
  dm era: check for a non-NULL metadata object before closing it
  dm thin: return ENOSPC instead of EIO when error_if_no_space enabled
  dm thin: cleanup noflush_work to use a proper completion
  dm snapshot: do not split read bios sent to snapshot-origin target
  dm snapshot: allocate a per-target structure for snapshot-origin target
  dm: introduce dm_accept_partial_bio
  dm: change sector_count member in clone_info from sector_t to unsigned

Pull more PCI updates from Bjorn Helgaas:
 "Here are some more things I'd like to see in v3.16-rc1:

   - DMA alias iterator, part of some work to fix IOMMU issues
   - MVEBU, Tegra, DesignWare changes that I forgot to include before
   - Some whitespace code cleanup

  Details:

  IOMMU
    - Add DMA alias iterator (Alex Williamson)
    - Add DMA alias quirks for ASMedia, ITE, Tundra bridges (Alex Williamson)
    - Add DMA alias quirks for Marvell, Ricoh devices (Alex Williamson)
    - Add DMA alias quirk for HighPoint devices (Jérôme Carretero)

  MSI
    - Fix leak in free_msi_irqs() (Alexei Starovoitov)

  Marvell MVEBU
    - Remove unnecessary use of 'conf_lock' spinlock (Andrew Murray)
    - Avoid setting an undefined window size (Jason Gunthorpe)
    - Allow several windows with the same target/attribute (Thomas Petazzoni)
    - Split PCIe BARs into multiple MBus windows when needed (Thomas Petazzoni)
    - Fix off-by-one in the computed size of the mbus windows (Willy Tarreau)

  NVIDIA Tegra
    - Use new OF interrupt mapping when possible (Lucas Stach)

  Synopsys DesignWare
    - Remove unnecessary use of 'conf_lock' spinlock (Andrew Murray)
    - Use new OF interrupt mapping when possible (Lucas Stach)
    - Split Exynos and i.MX bindings (Lucas Stach)
    - Fix comment for setting number of lanes (Mohit Kumar)
    - Fix iATU programming for cfg1, io and mem viewport (Mohit Kumar)

  Miscellaneous
    - EXPORT_SYMBOL cleanup (Ryan Desfosses)
    - Whitespace cleanup (Ryan Desfosses)
    - Merge multi-line quoted strings (Ryan Desfosses)"

* tag 'pci-v3.16-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (21 commits)
  PCI: Add function 1 DMA alias quirk for HighPoint RocketRaid 642L
  PCI/MSI: Fix memory leak in free_msi_irqs()
  PCI: Merge multi-line quoted strings
  PCI: Whitespace cleanup
  PCI: Move EXPORT_SYMBOL so it immediately follows function/variable
  PCI: Add bridge DMA alias quirk for ITE bridge
  PCI: designware: Split Exynos and i.MX bindings
  PCI: Add bridge DMA alias quirk for ASMedia and Tundra bridges
  PCI: Add support for PCIe-to-PCI bridge DMA alias quirks
  PCI: Add function 1 DMA alias quirk for Marvell devices
  PCI: Add function 0 DMA alias quirk for Ricoh devices
  PCI: Add support for DMA alias quirks
  PCI: Convert pci_dev_flags definitions to bit shifts
  PCI: Add DMA alias iterator
  PCI: mvebu: Use '%pa' for printing 'phys_addr_t' type
  PCI: mvebu: Remove unnecessary use of 'conf_lock' spinlock
  PCI: designware: Remove unnecessary use of 'conf_lock' spinlock
  PCI: designware: Use new OF interrupt mapping when possible
  PCI: designware: Fix iATU programming for cfg1, io and mem viewport
  PCI: designware: Fix comment for setting number of lanes
  ...

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are fixups on top of the previous PM+ACPI pull request,
  regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes
  (ACPI reset, cpufreq), new PM trace points for system suspend
  profiling and a copyright notice update.

  Specifics:

   - I didn't remember correctly that the Hans de Goede's ACPI video
     patches actually didn't flip the video.use_native_backlight
     default, although we had discussed that and decided to do that.
     Since I said we would do that in the previous PM+ACPI pull request,
     make that change for real now.

   - ACPI bus check notifications for PCI host bridges don't cause the
     bus below the host bridge to be checked for changes as they should
     because of a mistake in the ACPI-based PCI hotplug (ACPIPHP)
     subsystem that forgets to add hotplug contexts to PCI host bridge
     ACPI device objects.  Create hotplug contexts for PCI host bridges
     too as appropriate.

   - Revert recent cpufreq commit related to the big.LITTLE cpufreq
     driver that breaks arm64 builds.

   - Fix for a regression in the ppc-corenet cpufreq driver introduced
     during the 3.15 cycle and causing the driver to use the remainder
     from do_div instead of the quotient.  From Ed Swarthout.

   - Resets triggered by panic activate a BUG_ON() in vmalloc.c on
     systems where the ACPI reset register is located in memory address
     space.  Fix from Randy Wright.

   - Fix for a problem with cpufreq governors that decisions made by
     them may be suboptimal due to the fact that deferrable timers are
     used by them for CPU load sampling.  From Srivatsa S Bhat.

   - Fix for a problem with the Tegra cpufreq driver where the CPU
     frequency is temporarily switched to a "stable" level that is
     different from both the initial and target frequencies during
     transitions which causes udelay() to expire earlier than it should
     sometimes.  From Viresh Kumar.

   - New trace points and rework of some existing trace points for
     system suspend/resume profiling from Todd Brandt.

   - Assorted cpufreq fixes and cleanups from Stratos Karafotis and
     Viresh Kumar.

   - Copyright notice update for suspend-and-cpuhotplug.txt from
     Srivatsa S Bhat"

* tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges
  PM / sleep: trace events for device PM callbacks
  cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR
  cpufreq: tegra: update comment for clarity
  cpufreq: intel_pstate: Remove duplicate CPU ID check
  cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
  PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt
  cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info'
  cpufreq: governor: Be friendly towards latency-sensitive bursty workloads
  PM / sleep: trace events for suspend/resume
  cpufreq: ppc-corenet-cpu-freq: do_div use quotient
  Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64"
  cpufreq: Tegra: implement intermediate frequency callbacks
  cpufreq: add support for intermediate (stable) frequencies
  ACPI / video: Change the default for video.use_native_backlight to 1
  ACPI: Fix bug when ACPI reset register is implemented in system memory

Pull LED updates from Bryan Wu:
 "I just found merge window is open and I'm quite busy and almost forget
  to send out this pull request.  Thanks Russell and Alexandre ping me
  about this.

  So basically we got some clean up and leds-pwm fixing patches from
  Russell"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: Remove duplicated OOM message for individual driver
  drivers/leds: Replace __get_cpu_var use through this_cpu_ptr
  leds: lp55xx: add DT bindings for LP55231
  leds: 88pm860x: Fix missing refcount decrement for parent of_node
  leds: 88pm860x: Use of_get_child_by_name
  leds: leds-pwm: add DT support for LEDs wired to supply
  leds: leds-pwm: implement PWM inversion
  leds: leds-pwm: convert OF parsing code to use led_pwm_add()
  leds: leds-pwm: provide a common function to setup a single led-pwm device
  leds: pca9685: Remove leds-pca9685 driver
  dell-led: add mic mute led interface

Pull backlight fixes from Lee Jones:
 "This merely contains some very basic build/run-time bug fixes"

* tag 'backlight-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: gpio-backlight: Fix warning when the GPIO is on a I2C chip
  video/backlight: s6e63m0: Fix string type mismatch
  video/backlight: LP8788 needs PWM
  video/backlight: LP855X needs PWM
  video/pxa: LCD_CORGI needs BACKLIGHT_CLASS_DEVICE
  video/backlight: LM3630A needs PWM

This patch fixes a NULL pointer dereference regression bug that was
introduced with:

commit 1e1110c4
Author: Mikulas Patocka <mpatocka@redhat.com>
Date:   Sat May 17 06:49:22 2014 -0400

    target: fix memory leak on XCOPY

Now that target_put_sess_cmd() -> kref_put_spinlock_irqsave() is
called with a valid se_cmd->cmd_kref, a NULL pointer dereference
is triggered because the XCOPY passthrough commands don't have
an associated se_session pointer.

To address this bug, go ahead and checking for a NULL se_sess pointer
within target_put_sess_cmd(), and call se_cmd->se_tfo->release_cmd()
to release the XCOPY's xcopy_pt_cmd memory.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Pull more MFD updates from Lee Jones:
 "I missed collecting these patches due to a branch/tag naming
  ambiguity.  Completely my own fault, as I mindlessly named a branch
  and tag identically.  Sorry for the fuss.

  This pull-request contains some misplaced patches from Tony Lindgren
  that should have been part of the initial one"

* tag 'mfd-for-linus-3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
  mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle
  mfd: twl4030-power: Add support for board specific configuration
  mfd: twl4030-power: Add recommended idle configuration
  mfd: twl4030-power: Add generic reset configuration
  mfd: twl4030-power: Fix some defines for SW_EVENTS
  mfd: twl4030-power: Fix hang on reboot if sleep configuration was loaded earlier

Pull MMC fixes from Ulf Hansson:
 "Here are some mmc fixes for 3.16.

   - fix some various compiler warnings
   - make atmel-mci compile again
   - fix regression for sdhci-msm"

* tag 'mmc-v3.16-2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: simplify SDHCI Kconfig dependencies
  mmc: omap: don't select TPS65010
  mmc: mvsdio: avoid compiler warning
  mmc: atmel-mci: incude asm/cacheclush.h
  mmc: sdhci-msm: Fix fallout from sdhci refactoring
  mmc: usdhi6rol0: fix compiler warnings

Pull drm updates from Dave Airlie:
 "This is the main drm merge window pull request, changes all over the
  place, mostly normal levels of churn.

  Highlights:

  Core drm:
     More cleanups, fix race on connector/encoder naming, docs updates,
     object locking rework in prep for atomic modeset

  i915:
     mipi DSI support, valleyview power fixes, cursor size fixes,
     execlist refactoring, vblank improvements, userptr support, OOM
     handling improvements

  radeon:
     GPUVM tuning and large page size support, gart fixes, deep color
     HDMI support, HDMI audio cleanups

  nouveau:
     - displayport rework should fix lots of issues
     - initial gk20a support
     - gk110b support
     - gk208 fixes

  exynos:
     probe order fixes, HDMI changes, IPP consolidation

  msm:
     debugfs updates, misc fixes

  ast:
     ast2400 support, sync with UMS driver

  tegra:
     cleanups, hdmi + hw cursor for Tegra 124.

  panel:
     fixes existing panels add some new ones.

  ipuv3:
     moved from staging to drivers/gpu"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits)
  drm/nouveau/disp/dp: fix tmds passthrough on dp connector
  drm/nouveau/dp: probe dpcd to determine connectedness
  drm/nv50-: trigger update after all connectors disabled
  drm/nv50-: prepare for attaching a SOR to multiple heads
  drm/gf119-/disp: fix debug output on update failure
  drm/nouveau/disp/dp: make use of postcursor when its available
  drm/g94-/disp/dp: take max pullup value across all lanes
  drm/nouveau/bios/dp: parse lane postcursor data
  drm/nouveau/dp: fix support for dpms
  drm/nouveau: register a drm_dp_aux channel for each dp connector
  drm/g94-/disp: add method to power-off dp lanes
  drm/nouveau/disp/dp: maintain link in response to hpd signal
  drm/g94-/disp: bash and wait for something after changing lane power regs
  drm/nouveau/disp/dp: split link config/power into two steps
  drm/nv50/disp: train PIOR-attached DP from second supervisor
  drm/nouveau/disp/dp: make use of existing output data for link training
  drm/gf119/disp: start removing direct vbios parsing from supervisor
  drm/nv50/disp: start removing direct vbios parsing from supervisor
  drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
  drm/nouveau/disp/dp: create subclass for dp outputs
  ...

When running RHEL6 userspace on a current upstream kernel, "ip link"
fails to show VF information.

The reason is a kernel<->userspace API change introduced by commit
88c5b5ce ("rtnetlink: Call nlmsg_parse() with correct header length"),
after which the kernel does not see iproute2's IFLA_EXT_MASK attribute
in the netlink request.

iproute2 adjusted for the API change in its commit 63338dca4513
("libnetlink: Use ifinfomsg instead of rtgenmsg in rtnl_wilddump_req_filter").

The problem has been noticed before:
http://marc.info/?l=linux-netdev&m=136692296022182&w=2
(Subject: Re: getting VF link info seems to be broken in 3.9-rc8)

We can do better than tell those with old userspace to upgrade. We can
recognize the old iproute2 in the kernel by checking the netlink message
length. Even when including the IFLA_EXT_MASK attribute, its netlink
message is shorter than struct ifinfomsg.

With this patch "ip link" shows VF information in both old and new
iproute2 versions.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix to a problem observed when losing a FIN segment that does not
contain data.  In such situations, TLP is unable to recover from
*any* tail loss and instead adds at least PTO ms to the
retransmission process, i.e., RTO = RTO + PTO.
Signed-off-by: Per Hurtig <per.hurtig@kau.se>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fugang Duan says:

====================
net: fec: Enable Software TSO to improve the tx performance

Add SG and software TSO support for FEC.
This feature allows to improve outbound throughput performance.
Tested on imx6dl sabresd board, running iperf tcp tests shows:
        * 82% improvement comparing with NO SG & TSO patch

$ ethtool -K eth0 sg on
$ ethtool -K eth0 tso on
[  3] local 10.192.242.108 port 35388 connected with 10.192.242.167 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 3.0 sec   181 MBytes   506 Mbits/sec
* cpu loading is 30%

$ ethtool -K eth0 sg off
$ ethtool -K eth0 tso off
[  3] local 10.192.242.108 port 52618 connected with 10.192.242.167 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 3.0 sec  99.5 MBytes   278 Mbits/sec

FEC HW support IP header and TCP/UDP hw checksum, support multi buffer descriptor transfer
one frame, but don't support HW TSO. And imx6q/dl SOC FEC Gbps speed has HW bus Bandwidth
limitation (400Mbps ~ 700Mbps), imx6sx SOC FEC Gbps speed has no HW bandwidth limitation.

The patch set just enable TSO feature, which is done following the mv643xx_eth driver.

Test result analyze:
imx6dl sabresd board: there have 82% improvement, since imx6dl FEC HW has bandwidth limitation,
                      the performance with SW TSO is a milestone.

Addition test:
imx6sx sdb board:
upstream still don't support imx6sx due to some patches being upstream... they use same FEC IP.
Use the SW TSO patches test imx6sx sdb board in internal kernel tree:
No SW TSO patch: tx bandwidth 840Mbps, cpu loading is 100%.
SW TSO patch:    tx bandwidth 942Mbps, cpu loading is 65%.
It means the patch set have great improvement for imx6sx FEC performance.

V2:
* From Frank Li's suggestion:
	Change the API "fec_enet_txdesc_entry_free" name to "fec_enet_get_free_txdesc_num".
* Summary David Laight and Eric Dumazet's thoughts:
	RX BD entry number change to 256.
* From ezequiel's suggestion:
	Follow the latest TSO fixes from his solution to rework the queue stop/wake-up.
	Avoid unmapping the TSO header buffers.
* From Eric Dumazet's suggestion:
	Avoid more bytes copy, just copying the unaligned part of the payload into first
	descriptor. The suggestion will bring more complex for the driver, and imx6dl FEC
	DMA need 16 bytes alignment, but cpu loading is not problem that cpu loading is
	30%, the current performance is so better. Later chip like imx6sx Gigbit FEC DMA
	support byte alignment, so there don't exist memory copy. So, the V2 version drop
	the suggestion.
	Anyway, thanks for Eric's response and suggestion.

V3:
* From David Laight's feedback:
	Decide to drop RX BD entry number change for the SW TSO patch set.
	I will generate one separate patch to increase RX BDs entry for interrupt coalescing feature which
	will be supported in my later patch set.

V4:
* From David Laight's feedback:
	Remove the conditional in .fec_enet_get_bd_index().

V5:
* Patch #4 update:
  From David Laight's feedback:
	"expect fec_enet_get_free_txdesc_num() to return one less than it does currently."
	Change the function:
	Return space available, 0..size-1.  it always leave one free entry. Which is same as linux circ_buf.

Thanks for Eric and ezequiel's help and idea.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add software TSO support for FEC.
This feature allows to improve outbound throughput performance.

Tested on imx6dl sabresd board, running iperf tcp tests shows:
- 16.2% improvement comparing with FEC SG patch
- 82% improvement comparing with NO SG & TSO patch

$ ethtool -K eth0 tso on
$ iperf -c 10.192.242.167 -t 3 &
[  3] local 10.192.242.108 port 35388 connected with 10.192.242.167 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 3.0 sec   181 MBytes   506 Mbits/sec

During the testing, CPU loading is 30%.
Since imx6dl FEC Bandwidth is limited to SOC system bus bandwidth, the
performance with SW TSO is a milestone.

CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Laight <David.Laight@ACULAB.COM>
CC: Li Frank <B20596@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add Scatter/gather support for FEC.
This feature allows to improve outbound throughput performance.

Tested on imx6dl sabresd board:
Running iperf tests shows a 55.4% improvement.

$ ethtool -K eth0 sg off
$ iperf -c 10.192.242.167 -t 3 &
[  3] local 10.192.242.108 port 52618 connected with 10.192.242.167 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 3.0 sec  99.5 MBytes   278 Mbits/sec

$ ethtool -K eth0 sg on
$ iperf -c 10.192.242.167 -t 3 &
[  3] local 10.192.242.108 port 52617 connected with 10.192.242.167 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0- 3.0 sec   154 MBytes   432 Mbits/sec

CC: Li Frank <B20596@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to support SG, software TSO, let's increase BD entry number.

CC: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to enhance the code readable, let's factorize the
feature list.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IP header checksum is calcalated by network layer in default.
To support software TSO, it is better to use HW calculate the
IP header checksum.

FEC hw checksum feature request the checksum field in frame
is zero, otherwise the calculative CRC is not correct.

For segmentated TCP packet, HW calculate the IP header checksum again,
it doesn't bring any impact. For SW TSO, HW calculated checksum bring
better performance.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>