Added an extreme-case test for all 7 csum action headers.
Signed-off-by: Keara Leibovitz <kleib@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexandre Belloni says:

====================
net: mscc: ocelot: add more features

This series adds link aggregation and VLAN filtering hardware offload
support to the ocelot driver.

PTP support will be sent later.

changes in v2:
 - rebased on v4.18-rc1
 - check for aggregation type and only offload it when type is hash (balance-xor
   or 802.3ad)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add hardware VLAN filtering offloading on ocelot.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add link aggregation hardware offload support for Ocelot.

ocelot_get_link_ksettings() is not great but it does work until the driver
is reworked to switch to phylink.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add flag tc_flower_initialized to indicate the
completion if tc flower initialization.
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In systems where neigh gc thresh holds are set to high values,
admin deleted neigh entries (eg ip neigh flush or ip neigh del) can
linger around in NUD_FAILED state for a long time until periodic gc kicks
in. This patch forces neigh_invalidate when NUD_FAILED neigh_update is
from an admin.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says:

====================
Multipath tests for tunnel devices

This patchset adds a test for ECMP and weighted ECMP between two GRE
tunnels.

In patches #1 and #2, the function multipath_eval() is first moved from
router_multipath.sh to lib.sh for ease of reuse, and then fixed up.

In patch #3, the function tc_rule_stats_get() is parameterized to be
useful for egress rules as well.

In patch #4, a new function __simple_if_init() is extracted from
simple_if_init(). This covers the logic that needs to be done for the
usual interface: VRF migration, upping and installation of IP addresses.

Patch #5 then adds the test itself.

Additionally in patch #6, a requirement to add diagrams to selftests is
documented.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

ASCII art diagrams are well suited for presenting the topology that a
test uses while being easy to embed directly in the test file iteslf.
They make the information very easy to grasp even for simple topologies,
and for more complex ones they are almost essential, as figuring out the
interconnects from the script itself proves to be difficult.

Therefore state the requirement for topology ASCII art in README.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a GRE-tunneling test such that there are two tunnels involved, with
a multipath route listing both as next hops. Similarly to
router_multipath.sh, test that the distribution of traffic to the
tunnels honors the configured weights.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function simple_if_init() does two things: it creates a VRF, then
moves an interface into this VRF and configures addresses. The latter
comes in handy when adding more interfaces into a VRF later on. The
situation is similar for simple_if_fini().

Therefore split the interface remastering and address de/initialization
logic to a new pair of helpers __simple_if_init() / __simple_if_fini(),
and defer to these helpers from simple_if_init() and simple_if_fini().
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GRE multipath tests need stats on an egress counter. Change
tc_rule_stats_get() to take direction as an optional argument, with
default of ingress.

Take the opportunity to change line continuation character from | to \.
Move the | to the next line, which indent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Change the indentation of the function body from 7 spaces to one tab.
- Move initialization of weights_ratio up so that it can be referenced
  from the error message about packet difference being zero.
- Move |'s consistently to continuation line, which reindent.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function will be useful for the GRE multipath test that is coming
later.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It looks like the prior VLA removal, commit b16520f7 ("net/tls: Remove
VLA usage"), and a new VLA addition, commit c46234eb ("tls: RX path
for ktls"), passed in the night. This removes the newly added VLA, which
happens to have its bounds based on the same max value.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IP addresses of tunnel endpoint at H3 are set at the VLAN device
$h3.555. Therefore when test_gretap_untagged_egress() sets vlan 555 to
egress untagged at $swp3, $h3's rp_filter rejects these packets. The
test then spuriously fails.

Therefore turn off net.ipv4.conf.{all, $h3}.rp_filter.

Fixes: 9c7c8a82 ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the quest to remove all stack VLA usage from the kernel[1], this
allocates the values buffer during the callback instead of putting it
on the stack.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: sched: support replay of filter offload when binding to block

This series from John adds the ability to replay filter offload requests
when new offload callback is being registered on a TC block.  This is most
likely to take place for shared blocks today, when a block which already
has rules is bound to another interface.  Prior to this patch set if any
of the rules were offloaded the block bind would fail.

A new tcf_proto_op is added to generate a filter-specific offload request.
The new 'offload' op is supporting extack from day 0, hence we need to
propagate extack to .ndo_setup_tc TC_BLOCK_BIND/TC_BLOCK_UNBIND and
through tcf_block_cb_register() to tcf_block_playback_offloads().

The immediate use of this patch set is to simplify life of drivers which
require duplicating rules when sharing blocks.  Switch drivers (mlxsw)
can bind ports to rule lists dynamically, NIC drivers generally don't
have that ability and need the rules to be duplicated for each ingress
they match on.  In code terms this means that switch drivers don't
register multiple callbacks for each port.  NIC drivers do, and get a
separate request and hance rule per-port, as if the block was not shared.
The registration fails today, however, if some rules were already present.

As John notes in description of patch 7, drivers which register multiple
callbacks to shared blocks will likely need to flush the rules on block
unbind.  This set makes the core not only replay the the offload add
requests but also offload remove requests when callback is unregistered.

v2:
 - name parameters in patch 2;
 - use unsigned int instead of u32 for in_hw_coun;
 - improve extack message in patch 7.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Call the reoffload tcf_proto_op on all tcf_proto nodes in all chains of a
block when a callback tries to register to a block that already has
offloaded rules. If all existing rules cannot be offloaded then the
registration is rejected. This replaces the previous policy of rejecting
such callback registration outright.

On unregistration of a callback, the rules are flushed for that given cb.
The implementation of block sharing in the NFP driver, for example,
duplicates shared rules to all devs bound to a block. This meant that
rules could still exist in hw even after a device is unbound from a block
(assuming the block still remains active).
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the offload tcf_proto_op in cls_bpf to generate an offload message for
each bpf prog in the given tcf_proto. Call the specified callback with
this new offload message. The function only returns an error if the
callback rejects adding a 'hardware only' prog.

A prog contains a flag to indicate if it is in hardware or not. To
ensure the offload function properly maintains this flag, keep a reference
counter for the number of instances of the prog that are in hardware. Only
update the flag when this counter changes from or to 0.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the offload tcf_proto_op in cls_u32 to generate an offload message for
each filter and the hashtable in the given tcf_proto. Call the specified
callback with this new offload message. The function only returns an error
if the callback rejects adding a 'hardware only' rule.

A filter contains a flag to indicate if it is in hardware or not. To
ensure the offload function properly maintains this flag, keep a reference
counter for the number of instances of the filter that are in hardware.
Only update the flag when this counter changes from or to 0.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the reoffload tcf_proto_op in matchall to generate an offload message
for each filter in the given tcf_proto. Call the specified callback with
this new offload message. The function only returns an error if the
callback rejects adding a 'hardware only' rule.

Ensure matchall flags correctly report if the rule is in hw by keeping a
reference counter for the number of instances of the rule offloaded. Only
update the flag when this counter changes from or to 0.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the reoffload tcf_proto_op in flower to generate an offload message
for each filter in the given tcf_proto. Call the specified callback with
this new offload message. The function only returns an error if the
callback rejects adding a 'hardware only' rule.

A filter contains a flag to indicate if it is in hardware or not. To
ensure the reoffload function properly maintains this flag, keep a
reference counter for the number of instances of the filter that are in
hardware. Only update the flag when this counter changes from or to 0. Add
a generic helper function to implement this behaviour.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new tcf_proto_op called 'reoffload' that generates a new offload
message for each node in a tcf_proto. Pointers to the tcf_proto and
whether the offload request is to add or delete the node are included.
Also included is a callback function to send the offload message to and
the option of priv data to go with the cb.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass the extact struct from a tc qdisc add to the block bind function and,
in turn, to the setup_tc ndo of binding device via the tc_block_offload
struct. Pass this back to any block callback registrations to allow
netlink logging of fails in the bind process.
Signed-off-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
sh_eth: RPADIR related clean-ups

Here's a set of 2 patches against DaveM's 'net-next.git' repo. They are
clean-ups related to RPADIR (DMA padding to NET_IP_ALIGN)...
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If RPADIR exists, the value written to it is always the same for all SoCs
(and derived from NET_IP_ALIGN), so there has not  been any need to store
it in the *struct* sh_eth_cpu_data...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

The *enum*  RPADIR_BIT  was declared in the commit 86a74ff2 ("net:
sh_eth: add support for Renesas SuperH Ethernet") adding SH771x support,
however the SH771x manual doesn't have the RPADIR register described and,
moreover, tells why the padding insertion must not be used. The newer SoC
manuals do have RPADIR documented, though with somewhat different layout --
update the *enum* according to these manuals...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

So far unsupported WoL options are silently ignored. Change this and
reject attempts to set unsupported options. This prevents situations
where a user tries to set an unsupported WoL option and is under the
impression it was successful because ethtool doesn't complain.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5691484d ("net: ip6_gre: Fix headroom request in
ip6erspan_tunnel_xmit()") and commit 01b8d064 ("net: ip6_gre:
Request headroom in __gre6_xmit()") fix problems in reserving headroom
in the packets tunneled through ip6gre/tap and ip6erspan netdevices.

These two patches included snippets that reproduced the issues. This
patch elevates the snippets to a full-fledged test case.
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Guillaume Nault says:

====================
l2tp: trivial cleanups

Just a set of unrelated trivial cleanups (remove unused code, make
local functions static, etc.).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It always returns 0, and nobody reads the return value anyway.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace 'l2tp_pernet(tunnel->l2tp_net)' with 'pn', which has been set
on the preceding line.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is only used in l2tp_core.c.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function is only used in l2tp_core.c.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This function, and the associated .priv field, are unused.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

This callback has never been implemented.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

l2tp_core.c verifies that ->session_close() is defined before calling
it. There's no need for a stub.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yangbo Lu says:

====================
Support DPAA PTP clock and timestamping

This patchset is to support DPAA FMAN PTP clock and HW timestamping.
It had been verified on both ARM platform and PPC platform.
- The patch #1 to patch #5 are to support DPAA FMAN 1588 timer in
  ptp_qoriq driver.
- The patch #6 to patch #10 are to add HW timestamping support in
  DPAA ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Added the get_ts_info interface for ethtool to check
the timestamping capability.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>