When the managed cache is enabled, the last reference count
of a workgroup must be used for its workstation.

Otherwise, it could lead to incorrect (un)freezes in
the reclaim path, and it would be harmful.

A typical race as follows:

Thread 1 (In the reclaim path)  Thread 2
workgroup_freeze(grp, 1)                                refcnt = 1
...
workgroup_unfreeze(grp, 1)                              refcnt = 1
                                workgroup_get(grp)      refcnt = 2 (x)
workgroup_put(grp)                                      refcnt = 1 (x)
                                ...unexpected behaviors

* grp is detached but still used, which violates cache-managed
  freeze constraint.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's better not to positively BUG_ON the kernel, however developers
need a way to locate issues as soon as possible.

DBG_BUGON is introduced and it could only crash when EROFS_FS_DEBUG
(EROFS developping feature) is on. It is helpful for developers
to find and solve bugs quickly by eng builds.

Previously, DBG_BUGON is defined as ((void)0) if EROFS_FS_DEBUG is off,
but some unused variable warnings as follows could occur:

drivers/staging/erofs/unzip_vle.c: In function `init_alway:':
drivers/staging/erofs/unzip_vle.c:61:33: warning: unused variable `work' [-Wunused-variable]
  struct z_erofs_vle_work *const work =
                                 ^~~~

Fix it to #define DBG_BUGON(x) ((void)(x)).
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`trace_erofs_readpage' was designed for .readpage() interface hook
in order to trace the detailed synchronized read rather than
the internal implementation `z_erofs_do_read_page' which both
.readpage() and .readpages() use.

It seems the tracepoint was placed to a wrong place by mistake and
it should be moved to the right place.

Fixes: 284db12c ("staging: erofs: add trace points for reading zipped data")
Reviewed-by: Chen Gong <gongchen4@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename struct field SwLed0 to avoid CamelCase.
SwLed0 -> sw_led
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the function LedControl8188eu to avoid CamelCase.
LedControl8188eu -> led_control_8188eu
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comment for blink_handler() adds no extra information
in addition to the function name, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the function BlinkHandler to avoid CamelCase.
BlinkHandler -> blink_handler
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the function SwLedOff to avoid CamelCase.
SwLedOff -> sw_led_off
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the function SwLedOn to avoid CamelCase.
SwLedOn -> sw_led_on
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the variable LedCfg to avoid CamleCase.
LedCfg -> led_cfg
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add spaces around '&' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove comments in rtl8188eu_led.c. The function names are well
descriptive.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.21 cycle

Along with the headline feature of 5 new drivers, we have the
substantial addition of auxilliary sensor support on the lsm6sdx
parts for ST.  There has also been a good set of staging cleanup
in this period with more underway.

An ever increasing number of devices supported with just a new
ID which is a good sign that at least some manufacturers are
continuing to stabilise their interfaces.

New device support,
* ad7124
  - New driver supporting Analog Devices' ad7124-4 and ad7124-8 parts
    with the inevitable DT binding.
* ad7949
  - New driver supporting Analog Devices' ad7949, AD7682 and AD7689 ADCs.
* rm3100
  - New driver supporting PNIs RM3100 magnometer with bindings and
    vendor prefix.
* ti-dac7311
  - New driver supporting DAC7311, DAC6311 and DAC5311 TI DACs, with
    DT bindings.
* vcnl5035
  - New driver supporting the light sensor part of the VCNL4035, with
    DT bindings

Features,
* bindings
  - Add a generic ADC channel binding as we keep reinventing this
    wheel.
* adc128s052
  - Add IDs for additional pin compatible parts.
  - Add APCI ID seen on E3940 UP squared boards.
* ad_sigma_delta
  - Allow for custom data register overiding default.
* kxcjk1013
  - Add KIOX0009 ACPI ID as seen on the Acer One 10.
* lsm6dsx
  - Rework leading to...
  - External sensor support using the built in I2C master.
  - Initial support for a slave lis2mdl magnetometer.
* meson-saradc
  - Add temperature sensor support and bindings.
* st_magn
  - New ID for lsm9dsl_magn with bindings
  - New ID for lis3de accelerometer
* tpl0102
  - Add supprot for IIO_AVAIL_RANGE to report the range available
    from this device to userspace and in kernel users.

Cleanups and minor fixes
* tools
  - Allow outside specification of CFLAGS
* ad2s90
  - Handle and spi_read error.
  - Handle spi_setup failure
  - Drop a pointless assignment.
  - Prevent a potentail race by moving device registration to after
    all other setup.
  - Add missing scale attribute.
  - Add a sanity check on channel type before trying to read it.
* ad2s1210
  - Move to modern gpio descriptors.
  - Drop a gpioin flag which made no sense as far as we can tell.
  - Add dt table (bindings doc to follow when this is ready for
    moving out of staging).
* ad5933
  - Drop camel-case naming of ext_clk_hz.
  - White space fixes.
* ad7150
  - Local variable to shorten overly long line.
  - Alignment and line break fixes.
* ad7280a
  - Handle an error path that was previously ignored.
  - Use crc8.h to build the crc table replacing custom code.
  - Avoid unecessary cast.
  - Power down the device if an error happens in probe
  - Use devm routines to simplify probe and remove.
* ad7606
  - Alignment fixes.
* ad7780
  - This worked as long as by coincidence an uninitialized value
    was 0.  Lets not rely on that.
  - Ensure gain update is only used with the ad778x chips that
    actually support it.
  - Tidy up pattern mask generation.
  - Read regulator when scale is requested (which should be infrequent)
    as it might have changed from initialization.
* ad7816
  - Move to modern gpio descriptors
  - Don't use a busy_pin for ad7818 as there isn't one.
  - Ensure RD/WR and CONVST pins are outputs (previously they
    were brought up as inputs which doesn't seem to make any sense)
  - DT id table.
* adc128s052
  - SPDX
* adt7316
  - Alignment fix.
  - Fix data reading.  When using I2C the driver never actually
    used the value read.  This has been broken a very long time
    hence no rush to fix it now + the driver is undergoing a lot
    of cleanup.
  - Sanity check that the i2c read didn't fail to actually read
    anything.
* dpot-dac
  - Mark a switch full through with slightly different text so that
    gcc doesn't warn on it.
* gyro-adc
  - Fix a wrong file in the MAINTAINERS entry and add binding doc to the
    listed files.
* ina2xx
  - Add some early returns to clarify error paths in switch.
* lsm6dsx
  - MAINTAINERS entry.
* max11100
  - SPDX
* max9611
  - SPDX
* mcp4131
  - use of_device_get_match_data in preference to spi_get_device_id
    approach.
* rcar-adc
  - SPDX
* sc27xx
  - Add ADC conversion timeout support to avoid possible fault.
* ssp_sensors
  - Don't free managed resources manually.
* st-magn
  - Add a comment to avoid future confusion over when to use -magn
    postfix (on multi chip in package parts)
  - Add BDU register for LIS3MDL where it seems to have been missed.
* st-sensors
  - Minor spelling, grammar etc fixes.
* tpl0102
  - Use a pointer rather than an index of an array to improve conciseness.

* tag 'iio-for-4.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (80 commits)
  Staging: iio: adt7316: Add an extra check for 'ret' equals to 0
  Staging: iio: adt7316: Fix i2c data reading, set the data field
  dt-bindings: iio: adc: Add docs for ad7124
  iio: adc: Add ad7124 support
  dt-bindings: iio: adc: Add common ADCs properties to a separate file
  iio: ad_sigma_delta: Allow to provide custom data register address
  staging: iio: ad7816: Add device tree table.
  iio: imu: st_lsm6dsx: add entry in MAINTAINERS file
  iio: potentiometer: mcp4131: use of_device_get_match_data()
  staging: iio: adc: ad7280a: use devm_* APIs
  staging: iio: adc: ad7280a: power down the device on error in probe
  dt-bindings: iio: imu: st_lsm6dsx: add support to i2c pullup resistors
  iio: imu: st_lsm6dsx: add hw FIFO support to i2c controller
  iio: imu: st_lsm6dsx: add st_lsm6dsx_push_tagged_data routine
  iio: imu: st_lsm6dsx: add i2c embedded controller support
  iio: imu: st_lsm6dsx: introduce st_lsm6dsx_sensor_set_enable routine
  iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids
  iio: imu: st_lsm6dsx: remove static from st_lsm6dsx_set_watermark
  iio: imu: st_lsm6dsx: reload trimming parameter at bootstrap
  iio: imu: st_lsm6dsx: introduce locked read/write utility routines
  ...

Using multiple license representation as shown here [1].
[1] https://spdx.org/sites/cpstandard/files/pages/files/using_spdx_license_list_short_identifiers.pdfSigned-off-by: André Almeida <andrealmeid@riseup.net>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As one can see in a typedef at linux/types.h:103, s32 and int32_t are
both a 32 bits signed integer. s32 is preferred because it is defined
by the kernel maintainers and it prevents portability issues. Changed
to meet checkpatch criteria.
Signed-off-by: André Almeida <andrealmeid@riseup.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Align parameters to the opened parentesis.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comparisons should place the constant
on the right side of the test.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace equal to NULL with logic unary operator,
and removing not equal to NULL comparison.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unused crcend variable from the crcimage function.
Signed-off-by: Tim Collier <osdevtc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix function naming and parenthesis.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The line is split up to stay in 80 characters-
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct following errors reported by checkpath.pl:

ERROR: space required before the open parenthesis '(' #265: FILE:
drivers/staging/rtl8723bs/hal/rtl8723bs_recv.c:265:
+                       if(!precvframe) ')'

Also similar errors on line 274 and 283.
Signed-off-by: Josenivaldo Benito Jr <jrbenito@benito.qsl.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The parameter is sent to next line to stay in 80
characters
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added before parameters some spaces to match open parenthesis
on previous line.
Signed-off-by: Cristian Sicilia <sicilia.cristian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The SPDX identifier is a legally binding shorthand,
which can be used instead of the full boiler plate text.

All source and header files have SPDX identifiers.
Remove the GPL boiler plate text to reduce file size.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 57d05368.

Johan writes:
	This commit doesn't even do what it claims. It leaves the two
	spaces before tabs in place and instead removes a tab that was
	used to indent a continuation line, and therefore also hurts
	readability while introducing an inconsistency.
Reported-by: Johan Hovold <johan@kernel.org>
Cc: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit fcb733b5.

Johan writes:
	This patch removes the double newlines that were used as section
	headers in the lengthy protocol header file, and therefore hurts
	readability.

So I'm reverting it.
Reported-by: Johan Hovold <johan@kernel.org>
Cc: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ret = 0 indicates a case of no error but no data read from
the bus which is an invalid case. This case doesn't ever happen
in reality. It should perhaps be handled for correctness though.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

adt7316_i2c_read function nowhere sets the data field.
It is necessary to have an appropriate value for it.
Hence, assign the value stored in 'ret' variable to data field.

This is an ancient bug, and as no one seems to have noticed,
probably no sense in applying it to stable.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add support for Analog Devices AD7124 4-channels and 8-channels ADC.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The ad7124-4 and ad7124-8 are a family of 4 and 8 channel sigma-delta ADCs
with 24-bit precision and reference.

Three power modes are available which in turn affect the output data rate:
 * Full power: 9.38 SPS to 19,200 SPS
 * Mid power: 2.34 SPS to 4800 SPS
 * Low power: 1.17 SPS to 2400 SPS

The ad7124-4 can be configured to have four differential inputs, while
ad7124-8 can have 8. Moreover, ad7124 also supports per channel
configuration. Each configuration consists of gain, reference source,
output data rate and bipolar/unipolar configuration.

Datasheets:
Link: http://www.analog.com/media/en/technical-documentation/data-sheets/AD7124-4.pdf
Link: http://www.analog.com/media/en/technical-documentation/data-sheets/ad7124-8.pdfSigned-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

There are several ADC drivers that depend on the same device tree
bindings. Rather than continue to duplicate the properties, this patch
adds a common adc binding document that can be referenced. For beginning,
only two properties are documented.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Some newer devices from the Sigma-Delta ADC family do have their data
register at a different address than the current default address. Add a
parameter to the ad_sigma_delta_info struct which allows to override the
default address.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add device tree table for matching vendor ID.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add entry for st_lsm6dsx imu driver in MAINTAINERS file
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Try to get the device's data using OF API. In case of failure, fallback
to the spi_get_device_id() method.
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

devm_* APIs are device managed and make code simpler.
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Power down the device if anything goes wrong after the SPI has been
setup correctly in the probe function.

Existing code that toggles the AD7280A_CTRL_LB_SWRST bit inside
ad7280_chain_setup function is responsible for powering up the device.
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>