- 12 Mar, 2017 40 commits
-
-
James Smart authored
commit 8ea73db4 upstream. Correct WQ creation for pagesize The driver was calculating the adapter command pagesize indicator from the system pagesize. However, the buffers the driver allocates are only one size (SLI4_PAGE_SIZE), so no calculation was necessary. Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Cc: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ralf Baechle authored
commit ae2f5e5e upstream. Fix the following build error with binutils 2.25. CC arch/mips/mm/sc-ip22.o {standard input}: Assembler messages: {standard input}:132: Error: number (0x9000000080000000) larger than 32 bits {standard input}:159: Error: number (0x9000000080000000) larger than 32 bits {standard input}:200: Error: number (0x9000000080000000) larger than 32 bits scripts/Makefile.build:293: recipe for target 'arch/mips/mm/sc-ip22.o' failed make[1]: *** [arch/mips/mm/sc-ip22.o] Error 1 MIPS has used .set mips3 to temporarily switch the assembler to 64 bit mode in 64 bit kernels virtually forever. Binutils 2.25 broke this behavious partially by happily accepting 64 bit instructions in .set mips3 mode but puking on 64 bit constants when generating 32 bit ELF. Binutils 2.26 restored the old behaviour again. Fix build with binutils 2.25 by open coding the offending dli $1, 0x9000000080000000 as li $1, 0x9000 dsll $1, $1, 48 which is ugly be the only thing that will build on all binutils vintages. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Ralf Baechle authored
commit f9f1c8db upstream. Signed-off-by:
-
Luis R. Rodriguez authored
commit a5544880 upstream. While looking for early possible module loading failures I was able to reproduce a memory leak possible with kmemleak. There are a few rare ways to trigger a failure: o we've run into a failure while processing kernel parameters (parse_args() returns an error) o mod_sysfs_setup() fails o we're a live patch module and copy_module_elf() fails Chances of running into this issue is really low. kmemleak splat: unreferenced object 0xffff9f2c4ada1b00 (size 32): comm "kworker/u16:4", pid 82, jiffies 4294897636 (age 681.816s) hex dump (first 32 bytes): 6d 65 6d 73 74 69 63 6b 30 00 00 00 00 00 00 00 memstick0....... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8c6cfeba>] kmemleak_alloc+0x4a/0xa0 [<ffffffff8c200046>] __kmalloc_track_caller+0x126/0x230 [<ffffffff8c1bc581>] kstrdup+0x31/0x60 [<ffffffff8c1bc5d4>] kstrdup_const+0x24/0x30 [<ffffffff8c3c23aa>] kvasprintf_const+0x7a/0x90 [<ffffffff8c3b5481>] kobject_set_name_vargs+0x21/0x90 [<ffffffff8c4fbdd7>] dev_set_name+0x47/0x50 [<ffffffffc07819e5>] memstick_check+0x95/0x33c [memstick] [<ffffffff8c09c893>] process_one_work+0x1f3/0x4b0 [<ffffffff8c09cb98>] worker_thread+0x48/0x4e0 [<ffffffff8c0a2b79>] kthread+0xc9/0xe0 [<ffffffff8c6dab5f>] ret_from_fork+0x1f/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Fixes: e180a6b7 ("param: fix charp parameters set via sysfs") Reviewed-by:
Miroslav Benes <mbenes@suse.cz> Reviewed-by:
Aaron Tomlin <atomlin@redhat.com> Reviewed-by:
Rusty Russell <rusty@rustcorp.com.au> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
Jessica Yu <jeyu@redhat.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit fda2d27d upstream. We will set LPCR with correct value for radix during int. This make sure we start with a sanitized value of LPCR. In case of kexec, cpus can have LPCR value based on the previous translation mode we were running. Fixes: fe036a06 ("powerpc/64/kexec: Fix MMU cleanup on radix") Acked-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Aneesh Kumar K.V authored
commit a5ecdad4 upstream. Without this we will always find the feature disabled. Fixes: 984d7a1e ("powerpc/mm: Fixup kernel read only mapping") Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Ravi Bangoria authored
commit c21a493a upstream. Currently xmon data-breakpoint feature is broken. Whenever there is a watchpoint match occurs, hw_breakpoint_handler will be called by do_break via notifier chains mechanism. If watchpoint is registered by xmon, hw_breakpoint_handler won't find any associated perf_event and returns immediately with NOTIFY_STOP. Similarly, do_break also returns without notifying to xmon. Solve this by returning NOTIFY_DONE when hw_breakpoint_handler does not find any perf_event associated with matched watchpoint, rather than NOTIFY_STOP, which tells the core code to continue calling the other breakpoint handlers including the xmon one. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Signed-off-by:
-
Chuck Lever authored
commit 16f906d6 upstream. The MAX_SEND_SGES check introduced in commit 655fec69 ("xprtrdma: Use gathered Send for large inline messages") fails for devices that have a small max_sge. Instead of checking for a large fixed maximum number of SGEs, check for a minimum small number. RPC-over-RDMA will switch to using a Read chunk if an xdr_buf has more pages than can fit in the device's max_sge limit. This is considerably better than failing all together to mount the server. This fix supports devices that have as few as three send SGEs available. Reported-by:
Selvin Xavier <selvin.xavier@broadcom.com> Reported-by:
Devesh Sharma <devesh.sharma@broadcom.com> Reported-by:
Honggang Li <honli@redhat.com> Reported-by:
Ram Amrani <Ram.Amrani@cavium.com> Fixes: 655fec69 ("xprtrdma: Use gathered Send for large ...") Tested-by:
Steve Wise <swise@opengridcomputing.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Chuck Lever authored
commit c95a3c6b upstream. Commit d5440e27 ("xprtrdma: Enable pad optimization") made the Linux client omit XDR round-up padding in normal Read and Write chunks so that the client doesn't have to register and invalidate 3-byte memory regions that contain no real data. Unfortunately, my cheery 2014 assessment that this optimization "is supported now by both Linux and Solaris servers" was premature. We've found bugs in Solaris in this area since commit d5440e27 ("xprtrdma: Enable pad optimization") was merged (SYMLINK is the main offender). So for maximum interoperability, I'm disabling this optimization again. If a CM private message is exchanged when connecting, the client recognizes that the server is Linux, and enables the optimization for that connection. Until now the Solaris server bugs did not impact common operations, and were thus largely benign. Soon, less capable devices on Linux NFS/RDMA clients will make use of Read chunks more often, and these Solaris bugs will prevent interoperation in more cases. Fixes: 677eb17e ("xprtrdma: Fix XDR tail buffer marshalling") Signed-off-by:
-
Chuck Lever authored
commit b5f0afbe upstream. Pad optimization is changed by echoing into /proc/sys/sunrpc/rdma_pad_optimize. This is a global setting, affecting all RPC-over-RDMA connections to all servers. The marshaling code picks up that value and uses it for decisions about how to construct each RPC-over-RDMA frame. Having it change suddenly in mid-operation can result in unexpected failures. And some servers a client mounts might need chunk round-up, while others don't. So instead, copy the pad_optimize setting into each connection's rpcrdma_ia when the transport is created, and use the copy, which can't change during the life of the connection, instead. This also removes a hack: rpcrdma_convert_iovs was using the remote-invalidation-expected flag to predict when it could leave out Write chunk padding. This is because the Linux server handles implicit XDR padding on Write chunks correctly, and only Linux servers can set the connection's remote-invalidation-expected flag. It's more sensible to use the pad optimization setting instead. Fixes: 677eb17e ("xprtrdma: Fix XDR tail buffer marshalling") Signed-off-by:
-
Chuck Lever authored
commit 24abdf1b upstream. When pad optimization is disabled, rpcrdma_convert_iovs still does not add explicit XDR round-up padding to a Read chunk. Commit 677eb17e ("xprtrdma: Fix XDR tail buffer marshalling") incorrectly short-circuited the test for whether round-up padding is needed that appears later in rpcrdma_convert_iovs. However, if this is indeed a regular Read chunk (and not a Position-Zero Read chunk), the tail iovec _always_ contains the chunk's padding, and never anything else. So, it's easy to just skip the tail when padding optimization is enabled, and add the tail in a subsequent Read chunk segment, if disabled. Fixes: 677eb17e ("xprtrdma: Fix XDR tail buffer marshalling") Signed-off-by:
-
Magnus Lilja authored
commit adee40b2 upstream. Commit 3d8cc000 ("dmaengine: ipu: Consolidate duplicated irq handlers") consolidated the two interrupts routines into one, but the remaining interrupt routine only checks the status of the error interrupts, not the normal interrupts. This patch fixes that problem (tested on i.MX31 PDK board). Fixes: 3d8cc000 ("dmaengine: ipu: Consolidate duplicated irq handlers") Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Mark Marshall authored
commit 65644147 upstream. The commit 7a654172 ("mtd/ifc: Add support for IFC controller version 2.0") added support for version 2.0 of the IFC controller. The version 2.0 controller has the ECC status registers at a different location to the previous versions. Correct the fsl_ifc_nand structure so that the ECC status can be read from the correct location for both version 1.0 and 2.0 of the controller. Fixes: 7a654172 ("mtd/ifc: Add support for IFC controller version 2.0") Signed-off-by:
Mark Marshall <mark.marshall@omicronenergy.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Rafał Miłecki authored
commit a971df0b upstream. This allows tracking device state and e.g. makes devm work as expected. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
colyli@suse.de authored
commit 03a9e24e upstream. Recently I receive a bug report that on Linux v3.0 based kerenl, hot add disk to a md linear device causes kernel crash at linear_congested(). From the crash image analysis, I find in linear_congested(), mddev->raid_disks contains value N, but conf->disks[] only has N-1 pointers available. Then a NULL pointer deference crashes the kernel. There is a race between linear_add() and linear_congested(), RCU stuffs used in these two functions cannot avoid the race. Since Linuv v4.0 RCU code is replaced by introducing mddev_suspend(). After checking the upstream code, it seems linear_congested() is not called in generic_make_request() code patch, so mddev_suspend() cannot provent it from being called. The possible race still exists. Here I explain how the race still exists in current code. For a machine has many CPUs, on one CPU, linear_add() is called to add a hard disk to a md linear device; at the same time on other CPU, linear_congested() is called to detect whether this md linear device is congested before issuing an I/O request onto it. Now I use a possible code execution time sequence to demo how the possible race happens, seq linear_add() linear_congested() 0 conf=mddev->private 1 oldconf=mddev->private 2 mddev->raid_disks++ 3 for (i=0; i<mddev->raid_disks;i++) 4 bdev_get_queue(conf->disks[i].rdev->bdev) 5 mddev->private=newconf In linear_add() mddev->raid_disks is increased in time seq 2, and on another CPU in linear_congested() the for-loop iterates conf->disks[i] by the increased mddev->raid_disks in time seq 3,4. But conf with one more element (which is a pointer to struct dev_info type) to conf->disks[] is not updated yet, accessing its structure member in time seq 4 will cause a NULL pointer deference fault. To fix this race, there are 2 parts of modification in the patch, 1) Add 'int raid_disks' in struct linear_conf, as a copy of mddev->raid_disks. It is initialized in linear_conf(), always being consistent with pointers number of 'struct dev_info disks[]'. When iterating conf->disks[] in linear_congested(), use conf->raid_disks to replace mddev->raid_disks in the for-loop, then NULL pointer deference will not happen again. 2) RCU stuffs are back again, and use kfree_rcu() in linear_add() to free oldconf memory. Because oldconf may be referenced as mddev->private in linear_congested(), kfree_rcu() makes sure that its memory will not be released until no one uses it any more. Also some code comments are added in this patch, to make this modification to be easier understandable. This patch can be applied for kernels since v4.0 after commit: 3be260cc ("md/linear: remove rcu protections in favour of suspend/resume"). But this bug is reported on Linux v3.0 based kernel, for people who maintain kernels before Linux v4.0, they need to do some back back port to this patch. Changelog: - V3: add 'int raid_disks' in struct linear_conf, and use kfree_rcu() to replace rcu_call() in linear_add(). - v2: add RCU stuffs by suggestion from Shaohua and Neil. - v1: initial effort. Signed-off-by:
Coly Li <colyli@suse.de> Cc: Shaohua Li <shli@fb.com> Cc: Neil Brown <neilb@suse.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Maxime Ripard authored
commit fb61bb82 upstream. The RTC is clocked from either an internal, imprecise, oscillator or an external one, which is usually much more accurate. The difference perceived between the time elapsed and the time reported by the RTC is in a 10% scale, which prevents the RTC from being useful at all. Fortunately, the external oscillator is reported to be mandatory in the Allwinner datasheet, so we can just switch to it. Fixes: 9765d2d9 ("rtc: sun6i: Add sun6i RTC driver") Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Maxime Ripard authored
commit a9422a19 upstream. Some registers have a read-modify-write access pattern that are not atomic. Add some locking to prevent from concurrent accesses. Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Maxime Ripard authored
commit 37539414 upstream. Since we have to provide the clock very early on, the RTC driver cannot be built as a module. Make sure that won't happen. Signed-off-by:
-
Masato Suzuki authored
commit 7bb3a371 upstream. The introduction of the multi-device feature partially broke the support for zoned block devices. In the function f2fs_scan_devices, sbi->devs allocation and initialization is skipped in the case of a single device mount. This result in no device information structure being allocated for the device. This is fine if the device is a regular device, but in the case of a zoned block device, the device zone type array is not initialized, which causes the function __f2fs_issue_discard_zone to fail as get_blkz_type is unable to determine the zone type of a section. Fix this by always allocating and initializing the sbi->devs device information array even in the case of a single device if that device is zoned. For this particular case, make sure to obtain a reference on the single device so that the call to blkdev_put() in destroy_device_list operates as expected. Fixes: 3c62be17 ("f2fs: support multiple devices") Signed-off-by:
Masato Suzuki <masato.suzuki@wdc.com> Acked-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Jaegeuk Kim authored
commit 8b107f5b upstream. If segs_per_sec is over 1 like under SMR, previously f2fs issues discard commands redundantly on the same section, since we didn't move end position for the previous discard command. E.g., start end | | prefree_bitmap = [01111100111100] And, after issue discard for this section, end start | | prefree_bitmap = [01111100111100] Select this section again by searching from (end + 1), start end | | prefree_bitmap = [01111100111100] Fixes: 36abef4e ("f2fs: introduce mode=lfs mount option") Cc: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Hou Pengyang authored
commit e93b9865 upstream. For foreground gc, greedy algorithm should be adapted, which makes this formula work well: (2 * (100 / config.overprovision + 1) + 6) But currently, we fg_gc have a prior to select bg_gc victim segments to gc first, these victims are selected by cost-benefit algorithm, we can't guarantee such segments have the small valid blocks, which may destroy the f2fs rule, on the worstest case, would consume all the free segments. This patch fix this by add a filter in check_bg_victims, if segment's has # of valid blocks over overprovision ratio, skip such segments. Signed-off-by:
Hou Pengyang <houpengyang@huawei.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Jaegeuk Kim authored
commit 88c5c13a upstream. It turns out a stakable filesystem like sdcardfs in AOSP can trigger multiple vfs_create() to lower filesystem. In that case, f2fs will add multiple dentries having same name which breaks filesystem consistency. Until upper layer fixes, let's work around by f2fs, which shows actually not much performance regression. Signed-off-by:
-
Yunlei He authored
commit 7855eba4 upstream. This patch fix a problem of using memory after free in function __try_merge_extent_node. Fixes: 0f825ee6 ("f2fs: add new interfaces for extent tree") Signed-off-by:
Yunlei He <heyunlei@huawei.com> Reviewed-by:
-
Weston Andros Adamson authored
commit ed92d8c1 upstream. We're not taking into account that the space needed for the (variable length) attr bitmap, with the result that we'd sometimes get a spurious ERANGE when the ACL data got close to the end of a page. Just add in an extra page to make sure. Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit 6682c14b upstream. Bitmap and attrlen follow immediately after the op reply header. This was an oversight from commit bf118a34. Consequences of this are just minor efficiency (extra calls to xdr_shrink_bufhead). Fixes: bf118a34 "NFSv4: include bitmap in nfsv4 get acl data" Reviewed-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
-
Trond Myklebust authored
commit a5e14c93 upstream. This reverts commit 2cf10cdd. The patch has been seen to cause excessive looping. Reported-by:
Olga Kornievskaia <aglo@umich.edu> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit df3ab232 upstream. If we see that our pNFS READ/WRITE/COMMIT operation failed, but we also see that our layout segment is no longer valid, then we need to get a new layout segment before retrying. Fixes: 90816d1d ("NFSv4.1/flexfiles: Don't mark the entire deviceid...") Signed-off-by:
-
Trond Myklebust authored
commit 9d8cacbf upstream. Copy offload code needs to be hooked into the code for handling NFS4ERR_BAD_STATEID by ensuring that we set the "stateid" field in struct nfs4_exception. Reported-by:
-
Trond Myklebust authored
commit a974deee upstream. If we exit because the file access check failed, we currently leak the struct nfs4_state. We need to attach it to the open context before returning. Fixes: 3efb9722 ("NFSv4: Refactor _nfs4_open_and_get_state..") Signed-off-by:
-
Christoph Hellwig authored
commit 783112f7 upstream. Both the NFS protocols and the Linux VFS use a setattr operation with a bitmap of attributes to set to set various file attributes including the file size and the uid/gid. The Linux syscalls never mix size updates with unrelated updates like the uid/gid, and some file systems like XFS and GFS2 rely on the fact that truncates don't update random other attributes, and many other file systems handle the case but do not update the other attributes in the same transaction. NFSD on the other hand passes the attributes it gets on the wire more or less directly through to the VFS, leading to updates the file systems don't expect. XFS at least has an assert on the allowed attributes, which caught an unusual NFS client setting the size and group at the same time. To handle this issue properly this splits the notify_change call in nfsd_setattr into two separate ones. Signed-off-by:
-
Christoph Hellwig authored
commit 758e99fe upstream. Simplify exit paths, size_change use. Signed-off-by:
-
Stefano Babic authored
commit 9797484b upstream. Commit 050c3d52 ("vme: make core vme support explicitly non-modular") dropped the remove function because it appeared as if it was for removal of the bus, which is not supported. However, vme_bus_remove() is called when a VME device is removed from the bus and not when the bus is removed; as it calls the VME device driver's cleanup function. Without this function, the remove() in the VME device driver is never called and VME device drivers cannot be reloaded again. Here we restore the remove function that was deleted in that commit, and the reference to the function in the bus structure. Fixes: 050c3d52 ("vme: make core vme support explicitly non-modular") Cc: Manohar Vanga <manohar.vanga@gmail.com> Acked-by:
Martyn Welch <martyn@welchs.me.uk> Cc: devel@driverdev.osuosl.org Signed-off-by:
Stefano Babic <sbabic@denx.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Larry Finger authored
commit 6773386f upstream. Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu and rtl8192c-common: ================================================================== BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] at addr ffff8801c90edb08 Read of size 1 by task kworker/0:1/38 page:ffffea0007243800 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x8000000000004000(head) page dumped because: kasan: bad access detected CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Z77-DS3H, BIOS F11a 11/13/2013 Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi] 0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08 ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297 ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8 Call Trace: [<ffffffff829eea33>] ? dump_stack+0x5c/0x79 [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0 [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb] [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50 [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common] [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common] ... The problem is due to rtl8192ce and rtl8192cu sharing routines, and having different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved by placing the struct bt_coexist_info at the head of each of those private areas. Reported-and-tested-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Ping-Ke Shih authored
commit 40b368af upstream. The addresses of Wlan NIC registers are natural alignment, but some drivers have bugs. These are evident on platforms that need natural alignment to access registers. This change contains the following: 1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI, thus it should use rtl_read_byte(). 2. Register 0x4C7 of 8192ee is single byte. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Bjorn Andersson authored
commit 3e8b571a upstream. The "fw" firmware object is passed from the remoteproc core and should not be overwritten, as that results in leaked buffers and a double free of the the last firmware object. Fixes: 051fb70f ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Andrew Price authored
commit f38e5fb9 upstream. We must hold the rcu read lock across looking up glocks and trying to bump their refcount to prevent the glocks from being freed in between. Signed-off-by:
Andrew Price <anprice@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Steve Wise authored
commit f2625f7d upstream. cma_accept_iw() needs to return an error if conn_params is NULL. Since this is coming from user space, we can crash. Reported-by:
Shaobo He <shaobo@cs.utah.edu> Acked-by:
Sean Hefty <sean.hefty@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jason Gunthorpe authored
commit 55efcfcd upstream. The RDMA core uses ib_pack() to convert from unpacked CPU structs to on-the-wire bitpacked structs. This process requires that 1 bit fields are declared as u8 in the unpacked struct, otherwise the packing process does not read the value properly and the packed result is wired to 0. Several places wrongly used int. Crucially this means the kernel has never, set reversible correctly in the path record request. It has always asked for irreversible paths even if the ULP requests otherwise. When the kernel is used with a SM that supports this feature, it completely breaks communication management if reversible paths are not properly requested. The only reason this ever worked is because opensm ignores the reversible bit. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit d77044d1 upstream. VSS may use a char device to support the communication between the user level daemon and the driver. When the VSS channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new VSS offer from the host. Implement this logic. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 20951c75 upstream. Fcopy may use a char device to support the communication between the user level daemon and the driver. When the Fcopy channel is rescinded we need to make sure that the char device is fully cleaned up before we can process a new Fcopy offer from the host. Implement this logic. Signed-off-by:
-
