- 12 Apr, 2019 2 commits
-
-
Peter Ujfalusi authored
tfp410 can be connect to host processor in 24bit, single-edge (24 lines) or 12bit, dual-edge (12 lines). Add bus-width to the documentation so it can be used to select between the two connection scheme. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401124143.17179-2-peter.ujfalusi@ti.com
-
Peter Ujfalusi authored
In case either the HPD gpio is not specified or when the HPD gpio can not be used as interrupt we should tell the core that the HPD needs to be polled for detecting hotplug. Signed-off-by:
-
- 11 Apr, 2019 6 commits
-
-
Gerd Hoffmann authored
Add comments to the existing feature flags, documenting which commands belong to them. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190410114227.25846-2-kraxel@redhat.com
-
Gerd Hoffmann authored
Oops, the __iomem annotation was added to the header file only. Add it to the implementation (and documentation) too. Fixes: 5c5373b5 ("drm: switch drm_fb_xrgb8888_to_rgb888_dstclip to accept __iomem dst") Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190411044932.13247-1-kraxel@redhat.com
-
Noralf Trønnes authored
Due to copy/paste error, the fbdev format was changed to 32bpp = XRGB8888 which is an emulated format for the RGB565 drivers. Revert to to using the fallback which is dev->mode_config.preferred_depth for the drivers that set it or 32bpp for those that don't (repaper, st7586). Fixes: 3eba3922 ("drm/tinydrm: Drop using tinydrm_device") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190410124345.25945-1-noralf@tronnes.org
-
Noralf Trønnes authored
It is generic code and having it in the helper will let other drivers benefit from it. One change was necessary assuming this to be true: INTEL_INFO(dev_priv)->num_pipes == dev->mode_config.num_crtc Suggested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190407165243.54043-4-noralf@tronnes.org
-
Noralf Trønnes authored
This is done to stay consistent with our naming scheme of _register() = others can start calling us from any thread. Suggested-by:
-
Maxime Ripard authored
Now that we can express our DMA topology, rely on those property instead of hardcoding an offset from the dma_addr_t which wasn't really great. We still need to add some code to deal with the old DT that would lack that property, but we move the offset to the DRM device dma_pfn_offset to be able to rely on just the dma_addr_t associated to the GEM object. Acked-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/5df781318e7e05f780a11ed243dcf2b9fe8a08cb.1554108995.git-series.maxime.ripard@bootlin.com
-
- 10 Apr, 2019 5 commits
-
-
Sean Paul authored
Finally have a reason for a backmerge other than "it's been a while"! Backmerging drm-next to -misc-next to facilitate Rob Herring's work on Panfrost. Signed-off-by:Sean Paul <seanpaul@chromium.org>
-
Gerd Hoffmann authored
Signed-off-by:
-
Gerd Hoffmann authored
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_xrgb8888_to_rgb888_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). The helper function (drm_fb_xrgb8888_to_rgb888_line) has been changed to process a single scanline. Signed-off-by:
-
Gerd Hoffmann authored
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_xrgb8888_to_rgb565_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). The helper function (drm_fb_xrgb8888_to_rgb565_line) has been changed to process a single scanline. Signed-off-by:
-
Gerd Hoffmann authored
Not all archs have the __io_virt() macro, so cirrus can't simply convert pointers that way. The drm format helpers have to use memcpy_toio() instead. This patch makes drm_fb_memcpy_dstclip() accept a __iomem dst pointer and use memcpy_toio() instead of memcpy(). With that separating out the memcpy loop into the drm_fb_memcpy_lines() helper isn't useful any more, so move the code back into the calling functins. Signed-off-by:
-
- 09 Apr, 2019 16 commits
-
-
Qiang Yu authored
To prevent build fail on some platform which does not have it in the include file chain. Reviewed-by:
Randy Dunlap <rdunlap@infradead.org> Fixes: a1d2a633 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by:
Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190409003617.4470-2-yuq825@gmail.com
-
Qiang Yu authored
Current implementation does not support MMU-less plarforms. Suggested-by:
-
Neil Armstrong authored
The Amlogic G12A embeds the same Synopsys DW-HDMI Controller, but with : - a "backport" of the HDR signaling registers from more recent DW-HDMI controllers, this will need a tweak since it's not normally present on this version of the DW-HDMI controller - A direct mapping of TOP and DW-HDMI registers instead of an internal bus accessed using read/write registers - Support for RX-SENSE, but not yet implemented - Support for HDMI 2.1 Dynamic HDR, but not yet implemented - Different registers mapping for the HDMI PHY setup This patchs adds support for these changes while providing exact same support as the previous GXBB, GXL & GXM SoCs. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Reviewed-by:
-
Neil Armstrong authored
Finally add the Amlogic G12A SoC compatible for the VPU driver. Signed-off-by:
-
Neil Armstrong authored
While switching to the Common Clock Framework is still Work In Progress, this patch adds the corresponding G12A HDMI PLL setup to be on-par with the other SoCs support. The G12A has only a single tweak about the high frequency setup, where the HDMI PLL needs a specific setup to handle correctly the 5.94GHz DCO frequency. Apart that, it handls ecorrectly all the other HDMI frequencies and can achieve even better DMT clock frequency precision with the larger fractional dividier width. Signed-off-by:
-
Neil Armstrong authored
The Meson G12A SoCs uses the exact same CVBS encoder except a simple CVBS DAC register offset and settings delta. Signed-off-by:
-
Neil Armstrong authored
This patch adds support for the new OSD+VD Plane blending module in the CRTC code by adding the G12A code to manage the blending module and setting the right OSD1 & VD1 plane registers. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A SoC supports the same set of Video Planes, but now are handled by the new OSD plane blender module. This patch uses the same VD1 plane for G12A, using the exact same scaler and VD1 setup registers, except using the new blender register to disable the plane. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A SoC supports now up to 3 OSD planes (1 more than the previous SoCs) and a brand new OSD plane blender module. This patch uses the same OSD1 plane for G12A, using the exact same scaler and OSD1 setup registers, except using the new blender register to disable the plane. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A SoC needs a different VIU setup code, handle it. Signed-off-by:
-
Neil Armstrong authored
Amlogic G12A needs a different VPP setup code, handle it here. Signed-off-by:
-
Neil Armstrong authored
This patch adds the new VPU registers added since the Amlogic GXM SoCs. Signed-off-by:
-
Neil Armstrong authored
On Amlogic G12A SoC, the 2,97GHz PLL frequency is not stable enough to provide a correct 297MHz pixel clock, so switch the PLL base frequency with a /2 OD when the 297MHz pixel clock is requested. This solves the issue on G12A and also works fine on GXBB, GXL & GXM. Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A SoC has a slighly modified DW-HDMI Glue with support for HDMI 2.1 and a different DW-HDMI register access. Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A VPU is very similar to the Amlogic GXM VPU but with : - an enhanced plane blender, with up to 3 OSD planes - support for AFBC 1.2 decoder (for Bifrost GPU) - support display mode up to 4k60@75Hz Signed-off-by:
-
Neil Armstrong authored
Add the bindings for the Bifrost family of ARM Mali GPUs. The Bifrost GPU architecture is similar to the Midgard family, but with a different Shader Core & Execution Engine structures. Bindings are based on the Midgard family bindings, but the inner architectural changes makes it a separate family needing separate bindings. The Bifrost GPUs are present in a number of recent SoCs, like the Amlogic G12A Family, and many other vendors. The Amlogic vendor specific compatible is added to handle the specific IP integration differences and dependencies. Signed-off-by:
-
- 08 Apr, 2019 6 commits
-
-
Randy Dunlap authored
Note that the lima mailing list is moderated. Signed-off-by:
-
Gerd Hoffmann authored
Time to kill some bad sample code people are copying from ;) This is a complete rewrite of the cirrus driver. The cirrus_mode_set() function is pretty much the only function which is carried over largely unmodified. Everything else is upside down. It is a single monster patch. But given that it does some pretty fundamental changes to the drivers workflow and also reduces the code size by roughly 70% I think it'll still be alot easier to review than a longish baby-step patch series. Changes summary: - Given the small amout of video memory (4 MB) the cirrus device has the rewritten driver doesn't try to manage buffers there. Instead it will blit (memcpy) the active framebuffer to video memory. - All gem objects are stored in main memory and are manged using the new shmem helpers. ttm is out. - It supports RG16, RG24 and XR24 formats. XR24 gets converted to RG24 or RG16 at blit time if needed, to avoid the pitch becoming larger than what the cirrus hardware can handle. - The simple display pipeline is used. - The generic fbdev emulation is used. - It's a atomic driver now. - It runs wayland. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
-
Gerd Hoffmann authored
Simliar to drm_fb_xrgb8888_to_rgb565_dstclip() but converts to rgb888 instead of rgb565. Signed-off-by:
-
Gerd Hoffmann authored
It is a drm_fb_xrgb8888_to_rgb565() variant which checks the clip rectangle for the destination too. Common code between drm_fb_xrgb8888_to_rgb565() and drm_fb_xrgb8888_to_rgb565_dstclip() was factored out into the drm_fb_xrgb8888_to_rgb565_lines() helper function. Signed-off-by:
-
Gerd Hoffmann authored
It is a drm_fb_memcpy() variant which checks the clip rectangle for the destination too. Common code between drm_fb_memcpy() and drm_fb_memcpy_dstclip() was factored out into the drm_fb_memcpy_lines() helper function. Signed-off-by:
-
Gerd Hoffmann authored
Also rename them from tinydrm_* to drm_fb_* Pure code motion, no functional change. Signed-off-by:
-
- 05 Apr, 2019 2 commits
-
-
Sean Paul authored
The file was removed in the below patch and is causing this error: WARNING: kernel-doc '../scripts/kernel-doc -rst -enable-lineno -function Canvas ../drivers/gpu/drm/meson/meson_canvas.c' failed with return code Fixes: 2bf6b5b0 ("drm/meson: exclusively use the canvas provider module") Cc: Maxime Jourdan <mjourdan@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Acked-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.2: UAPI Changes: -syncobj: Add TIMELINE_WAIT|QUERY|TRANSFER|TIMELINE_SIGNAL ioctls (Chunming) -Clarify that 1.0 can be represented by drm_color_lut (Daniel) Cross-subsystem Changes: -dt-bindings: Add binding for rk3066 hdmi (Johan) -dt-bindings: Add binding for Feiyang FY07024DI26A30-D panel (Jagan) -dt-bindings: Add Rocktech vendor prefix and jh057n00900 panel bindings (Guido) -MAINTAINERS: Add lima and ASPEED entries (Joel & Qiang) Core Changes: -memory: use dma_alloc_coherent when mem encryption is active (Christian) -dma_buf: add support for a dma_fence chain (Christian) -shmem_gem: fix off-by-one bug in new shmem gem helpers (Dan) Driver Changes: -rockchip: Add support for rk3066 hdmi (Johan) -ASPEED: Add driver supporting ASPEED BMC display controller to drm (Joel) -lima: Add driver supporting Arm Mali4xx gpus to drm (Qiang) -vc4/v3d: Various cleanups and improved error handling (Eric) -panel: Add support for Feiyang FY07024DI26A30-D MIPI-DSI panel (Jagan) -panel: Add support for Rocktech jh057n00900 MIPI-DSI panel (Guido) Cc: Johan Jonker <jbx6244@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Eric Anholt <eric@anholt.net> Cc: Qiang Yu <yuq825@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Guido Günther <agx@sigxcpu.org> Cc: Joel Stanley <joel@jms.id.au> [airlied: fixed XA limit build breakage, Rodrigo also submitted the same patch, but I squashed it in the merge.] Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190404201016.GA139524@art_vandelay
-
- 04 Apr, 2019 3 commits
-
-
Wen Yang authored
The call to of_find_matching_node_and_match returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD) Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS) Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS) Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn
-
kbuild test robot authored
Fixes: c9be804c ("drm/vc4: Use common helpers for debugfs setup by the driver components.") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Joe Perches authored
These were missing '\n' terminations, add them. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/da6f2344396555034cf2476c8338b0ce1c56e0a7.camel@perches.com
-
