- 30 Mar, 2009 40 commits
-
-
Roel Kluin authored
Add missing parentheses Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sebastian Andrzej Siewior authored
because they might design two of those chips on a single board. You never know. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Vitaly Wool <vital@embeddedalley.com>: > about half a year ago I posted the patch that basically enabled Compro > VideoMate For You USB TV box support. > The main problem is I couldn't get the sound working. > So I kind of decomposed the box and found out the audio decoder chip > used there was Philips TDA9874A. As far as I can see, it's not supported > within the em28xx suite although it is for other TV tuner drivers. A tvaudio modprobing confirms that tda9874a chip is accessible via i2c: tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840, tda9873h, tda9874h/a, tda9850, tda9855, tea6300, tea6320, tea6420, tda8425, pic16c54 (PV951), ta8874z tvaudio' 1-0058: chip found @ 0xb0 tvaudio' 1-0058: tvaudio': chip_read2: reg254=0x11 tvaudio' 1-0058: tvaudio': chip_read2: reg255=0x2 tvaudio' 1-0058: tda9874a_checkit(): DIC=0x11, SIC=0x2. tvaudio' 1-0058: found tda9874a. tvaudio' 1-0058: tda9874h/a found @ 0xb0 (em28xx #0) tvaudio' 1-0058: tda9874h/a: chip_write: reg0=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg1=0xc0 tvaudio' 1-0058: tda9874h/a: chip_write: reg2=0x2 tvaudio' 1-0058: tda9874h/a: chip_write: reg11=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg12=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg13=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg14=0x1 tvaudio' 1-0058: tda9874h/a: chip_write: reg15=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg16=0x14 tvaudio' 1-0058: tda9874h/a: chip_write: reg17=0x50 tvaudio' 1-0058: tda9874h/a: chip_write: reg18=0xf9 tvaudio' 1-0058: tda9874h/a: chip_write: reg19=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg20=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg24=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg255=0x0 tvaudio' 1-0058: tda9874a_setup(): A2, B/G [0x00]. tvaudio' 1-0058: tda9874h/a: thread started] This patch automatically loads tvaudio when needed (currently, only with this board). Signed-off-by: -
Laurent Pinchart authored
At least 3 Vimicro cameras (0x332d, 0x3410 and 0x3420) fail to return correct bandwidth information. The first model rounds the value provided by the host to the nearest supported packet size, while the other two always request the maximum bandwidth. Introduce a device quirk to override the value returned by the device with an estimated bandwidth computed by the driver from the frame size and frame rate, and enable it for all Vimicro cameras. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
Devices may send a zero-length packet to signal the end of a bulk payload. If the payload size is a multiple of the URB size the zero-length packet will be received by the URB completion handler. Handle this by ignoring all empty URBs. Signed-off-by:
-
Laurent Pinchart authored
The UVC specification requires SET_CUR requests on the streaming commit control to use values retrieved from a successful GET_CUR request on the probe control. Initialize streaming parameters with the probe control current value to make sure the driver always complies. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- add v4l2_device - remove BKL - make the debug parameter settable on the fly - set bus_info in querycap Signed-off-by:
-
Hans Verkuil authored
Remain consistent in the naming: fields pointing to v4l2_device should be called v4l2_dev. There are too many device-like entities without adding to the confusion by mixing naming conventions. Signed-off-by:
-
Hans Verkuil authored
Some drivers (e.g. for ISA devices) have no parent device because there is no associated bus driver. Allow the parent device to be NULL in those cases when registering v4l2_device. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
get_index() had a limitation of 32 devices per driver. This was unnecessarily strict and has been replaced with the maximum number of devices. That should really satisfy anyone! Signed-off-by:
-
Adam Baker authored
Add initial support for cameras based on the SQ Technologies SQ-905 chipset (USB ID 2770:9120) to V4L2 using the gspca infrastructure. Currently only supports one resolution and doesn't attempt to inform libv4l what image flipping options are needed. Signed-off-by:
Adam Baker <linux@baker-net.org.uk> Signed-off-by:
Theodore Kilgore <kilgota@auburn.edu> Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
- prevent application oops when the device is disconnected - wake up the application at disconnection time - check the disconnection in ioctl dqbuf and poll Signed-off-by:
-
Tobias Lorenz authored
This patch adds functions to access the scratchpad. For it is this good for? In the first two bytes, the developers stored the HW/PCB version and the software release of the firmware. This is now written to syslog, so debugging get's easier. Also knowing the versions is the key for flash upgrades later on. There are also some cleanups of the flash report sizes. Altogether this should justify the new version number 1.0.9. Thanks to Rick Bronson <rick@efn.org> Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Márton Németh authored
Fix typo in "DAB adapters" section in Kconfig. Signed-off-by:
Márton Németh <nm127@freemail.hu> Signed-off-by:
-
Oldřich Jedlička authored
Added support for I2C device at address 0x40 and subaddress 0x0d/0x0b that provides remote control key reading support for AVerMedia Cardbus Hybrid card, possibly for other AVerMedia Cardbus cards. The I2C address 0x40 doesn't like the SAA7134's 0xfd quirk, so it was disabled. [mchehab@redhat.com: CodingStyle fixes] Signed-off-by:
Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning: drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Roel Kluin authored
With while (i++ < 10) { ... } i can reach 11, so callibration still succeeds at i == 10. Signed-off-by: -
Roel Kluin authored
with while (try_count-- > 0) { ... } try_count reaches 0, not -1. Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: -
Tobias Klauser authored
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Sergio Aguirre authored
This is a common feature on many cameras. the options are: Default colors, B & W, Sepia Signed-off-by:
Sergio Aguirre <saaguirre@ti.com> Signed-off-by:
-
Tim Farrington authored
Make correction to composite input plus svideo input to Avermedia E506R Signed-off-by:
Tim Farrington <timf@iinet.net.au> Signed-off-by:
-
Mauro Carvalho Chehab authored
Documents the driver usage functions, instead of the generic one used by the videobuf specific handlers. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Trent Piepho authored
The bttv driver had static array of structures for up to 16 possible bttv devices, even though few users have more than one or two. The structures were quite large and this resulted in a huge BSS segment. Change the driver to allocate the bttv device data dynamically, which changes "struct bttv bttvs[BTTV_MAX]" to "struct bttv *bttvs[BTTV_MAX]". It would be nice to get ride of "bttvs" entirely but there are some complications with gpio access from the audio & mpeg drivers. To help bttvs removal along anyway, I changed the open() methods use the video device's drvdata to get the driver data instead of looking it up in the bttvs array. This is also more efficient. Some WARN_ON()s are added in cases the device node exists by the bttv device doesn't, which I don't think should be possible. The gpio access functions need to check if bttvs[card] is NULL now. Though calling them on a non-existent card in the first place is wrong, but hard to solve given the fundamental problems in how the gpio access code works. This patch reduces the bss size by 66560 bytes on ia32. Overall change is a reduction of 66398 bytes, as the WARN_ON()s add some 198 bytes. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Trent Piepho authored
Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: -
Trent Piepho authored
This card apparently uses an external mux and the Bt878's mux should always be set to MUX2. The values for the external mux control bits were stored in the muxsel field. This meant that when changing inputs the driver would switch the Bt878's mux to whatever value the external mux was supposed to be set to, then eagle_muxsel() would switch it back to MUX2 and program the external mux. This creates an unnecessary switch of the Bt878's mux. So change muxsel to be 2 for each input. The external mux bits are just "input&3" so they don't really need to be stored anywhere. This also eliminates the last non-standard use of the muxsel data. Cc: M G Berberich <berberic@fmi.uni-passau.de> Signed-off-by:
-
Trent Piepho authored
Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. The RemoteVision MX board used this feature to control an external video mux and I guess no one noticed when they removed the code. Move the extra gpio mux data out of the high nibble of muxsel and to rv605_muxsel(), then have that function set the gpio lines with it. From looking at the CD22M3494E datasheet, it seems like the mdelay(1) is a much longer delay than necessary. It looks like only around 20 ns is necessary. Cc: Miguel Freitas <miguel@cetuc.puc-rio.br> Signed-off-by:
-
Trent Piepho authored
Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by:
-
Trent Piepho authored
The card data for BTTV_BOARD_IVC120 set muxsel to a bunch of bogus values (1 to 16), which the common mux code would use to set the Bt878's mux to some random value. Then the custom code in ivc120_muxsel() would change the Bt878's mux to the right value (always MUX0). Better to just make the muxsel data correct (all zeros, easy!) and get the mux right to begin with. Then the extra Bt878 mux setting code in ivc120_muxsel() can be eliminated (the rest of the code for the IVC-120G's external mux is still there of course). This will help me clean up muxsel for some other changes. It should also get rid of an unnecessary mux switch when changing from certain inputs to certain other inputs on the IVC-120G. Cc: Alan Garfield <alan@fromorbit.com> Signed-off-by:
-
Trent Piepho authored
The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by:
-
