- 23 Apr, 2019 3 commits
-
-
Radhakrishna Sripada authored
Fixes the clock-gating issue when pipe scaling is enabled. (Lineage #2006604312) V2: Fix typo in headline(Chris) Handle the non double buffered nature of the register(Ville) V3: Fix checkpatch warning. BAT failure for V2 on gen3 looks unrelated. V4: Split the icl and skl wa's(Ville) V5: Split the checks for icl and skl(Ville) V6: Correct the flipped checks in intel_pre_plane_update(Ville) V7: Use enum for pipe and extend the WA for plane scalers(Ville) V8: Eliminate the redundant use of pch_pfit(Ville) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190417185901.14833-1-radhakrishna.sripada@intel.com
-
Ville Syrjälä authored
The spec has changed since skl_max_plane_width() was written. Now the SKL limits are lower than what they were initially, and GLK and ICL have different limits. Update the code to match the spec. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com>
-
Imre Deak authored
Fix the order of lane, port parameters passed to the register macro. Note that this was already partly fixed by commit 37fc7845 ("drm/i915: Call MG_DP_MODE() macro with the right parameters order") While at it simplify things by using the macro directly instead of an unnecessary redirection via an array. v2: - Add a note the commit message about simplifying things. (José) Fixes: 58106b7d ("drm/i915: Make MG PHY macros semantically consistent") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Aditya Swarup <aditya.swarup@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419071026.32370-1-imre.deak@intel.com
-
- 20 Apr, 2019 6 commits
-
-
Chris Wilson authored
When we are called to relieve mempressue via the shrinker, the only way we can make progress is either by discarding unwanted pages (those objects that userspace has marked MADV_DONTNEED) or by reclaiming the dirty objects via swap. As we know that is the only way to make further progress, we can initiate the writeback as we invalidate the objects. This means the objects we put onto the inactive anon lru list are already marked for reclaim+writeback and so will trigger a wait upon the writeback inside direct reclaim, greatly improving the success rate of direct reclaim on i915 objects. The corollary is that we may start a slow swap on opportunistic mempressure from the likes of the compaction + migration kthreads. This is limited by those threads only being allowed to shrink idle pages, but also that if we reactivate the page before it is swapped out by gpu activity, we only page the cost of repinning the page. The cost is most felt when an object is reused after mempressure, which hopefully excludes the latency sensitive tasks (as we are just extending the impact of swap thrashing to them). Apparently this is not the first time we've had this idea. Back in commit 5537252b ("drm/i915: Invalidate our pages under memory pressure") we wanted to start writeback but settled on invalidate after Hugh Dickins warned us about a possibility of a deadlock within shmemfs if we started writeback from shrink_slab. Looking at the callchain, using writeback from i915_gem_shrink should be equivalent to the pageout also employed by shrink_slab, i.e. it should not be any riskier afaict. v2: Leave mmapings intact. At this point, the only mmapings of our objects will be via CPU mmaps on the shmemfs filp, which are out-of-scope for our LRU tracking. Instead leave those pages to the inactive anon LRU page list for aging and pageout as normal. v3: Be selective on which paths trigger writeback, in particular excluding paths shrinking just to reclaim vm space (e.g. mmap, vmap reapers) and avoid starting writeback on the entire process space from within the pm freezer. References: https://bugs.freedesktop.org/show_bug.cgi?id=108686Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20190420115539.29081-1-chris@chris-wilson.co.uk
-
Fernando Pacheco authored
GPU reset is now available with GuC enabled, so re-enable our check that this reset is usable from atomic context. Signed-off-by:
Fernando Pacheco <fernando.pacheco@intel.com> Reviewed-by:
-
Fernando Pacheco authored
We have now prepared the guc reset paths to avoid taking struct_mutex, or any other lock, and so it is now safe to re-enable. References: fe62365f ("drm/i915/guc: Disable global reset") Signed-off-by:
-
Fernando Pacheco authored
Currently we pin the GuC or HuC firmware image just before uploading. Perma-pin during uC initialization instead and use the range reserved at the top of the address space. Moving the firmware resulted in needing to: - use an additional pinning for the rsa signature which will be used during HuC auth as addresses above GUC_GGTT_TOP do not map through GTT. v2: Remove call to set to gtt domain Do not restore fw gtt mapping unconditionally Separate out pin/unpin functions and drop usage of pin/unpin Use uc_fw init/fini functions to bind/unbind fw object v3: Bind is only needed during xfer (Chris) Remove attempts to bind outside of xfer (Chris) Mark fw bind/unbind static Signed-off-by: -
Fernando Pacheco authored
GuC and HuC depend on struct_mutex for device reinitialization. Moving away from this dependency requires perma-pinning the firmware images in GGTT. The upper portion of the GuC address space has a sizeable hole (several MB) that is inaccessible by GuC. Reserve this range within GGTT as it can comfortably hold GuC/HuC firmware images. v2: Reserve node rather than insert (Chris) Simpler determination of node start/size (Daniele) Move reserve/release out to intel_guc.* files v3: Reserve starting at GUC_GGTT_TOP only and bail if this fails (Chris) Signed-off-by: -
Fernando Pacheco authored
he uC firmware init function is called during GuC/HuC init early phases. Rename to include "_early" and properly reflect which phase we are at. The uC firmware fini function is cleaning up the state set/created on firmware fetch. Replace "_fini" with "_cleanup_fetch". v2: also rename uC fw fini function Signed-off-by:
-
- 19 Apr, 2019 6 commits
-
-
Chris Wilson authored
If we know that the user cannot access the GGTT, by virtue of having a segregated memory area, we can skip clearing the unused entries as they cannot be accessed. Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419201207.5477-1-chris@chris-wilson.co.uk
-
Christian König authored
This is to work around problems with libva and vainfo. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Chris Wilson authored
An interesting discussion regarding "hybrid interrupt polling" for NVMe came to the conclusion that the ideal busyspin before sleeping was half of the expected request latency (and better if it was already halfway through that request). This suggested that we too should look again at our tradeoff between spinning and waiting. Currently, our spin simply tries to hide the cost of enabling the interrupt, which is good to avoid penalising nop requests (i.e. test throughput) and not much else. Studying real world workloads suggests that a spin of upto 500us can dramatically boost performance, but the suggestion is that this is not from avoiding interrupt latency per-se, but from secondary effects of sleeping such as allowing the CPU reduce cstate and context switch away. In a truly hybrid interrupt polling scheme, we would aim to sleep until just before the request completed and then wake up in advance of the interrupt and do a quick poll to handle completion. This is tricky for ourselves at the moment as we are not recording request times, and since we allow preemption, our requests are not on as a nicely ordered timeline as IO. However, the idea is interesting, for it will certainly help us decide when busyspinning is worthwhile. v2: Expose the spin setting via Kconfig options for easier adjustment and testing. v3: Don't get caught sneaking in a change to the busyspin parameters. v4: Explain more about the "hybrid interrupt polling" scheme that we want to migrate towards. Suggested-by:
Sagar Kamble <sagar.a.kamble@intel.com> References: http://events.linuxfoundation.org/sites/events/files/slides/lemoal-nvme-polling-vault-2017-final_0.pdfSigned-off-by:
-
Chris Wilson authored
For consistency (and elegance!), add intel_device_info.has_rps. The immediate boon is that RPS support is now emitted along the other capabilities in the debug log and after errors. Signed-off-by:
-
Janusz Krzysztofik authored
The driver does not currently support unbinding from a device which is in use. Since open file descriptors may still be pointing into kernel memory where the device structures used to be, entirely correct kernel panics protect the driver from being unbound as we should not be unbinding it before those dangling pointers have been made safe. According to the documentation found inside drivers/gpu/drm/drm_drv.c, drm_dev_unplug() should be used instead of drm_dev_unregister() in order to make a device inaccessible to users as soon as it is unpluged. Follow that advice to make those possibly dangling pointers safe, protected by DRM layer from a user who is otherwise left pointing into possibly reused kernel memory after the driver has been unbound from the device. Once done, also cancel inflight operations immediately by calling i915_gem_set_wedged(). Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@intel.com> Reviewed-by:
-
Chris Wilson authored
We always start off at an "efficient frequency" and can let the system autotune from there, eliminating the need to clamp the available range. Signed-off-by:
-
- 18 Apr, 2019 2 commits
-
-
Chris Wilson authored
We need to set the various ring registers prior to restarting the engine, or else we may restart it after reset/resume in an ill-defined state. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
-
Chris Wilson authored
We store the engine->imr mask and set up the RING_IMR register on restarting the engine. We do not then want to overwrite it with an incomplete mask later as we may then lose interrupts! Reported-by:
-
- 17 Apr, 2019 7 commits
-
-
Chris Wilson authored
We have to avoid chasing after a userspace race! <3>[ 473.114328] BUG: KASAN: use-after-free in i915_gem_create+0x1d2/0x1f0 [i915] <3>[ 473.114389] Read of size 8 at addr ffff88815bf1d840 by task gem_flink_race/1541 <4>[ 473.114464] CPU: 1 PID: 1541 Comm: gem_flink_race Tainted: G U 5.1.0-rc4-g7d07e025e786-kasan_88+ #1 <4>[ 473.114469] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4205-ITX, BIOS P1.10 09/29/2016 <4>[ 473.114474] Call Trace: <4>[ 473.114488] dump_stack+0x7c/0xbb <4>[ 473.114612] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114621] print_address_description+0x65/0x270 <4>[ 473.114728] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114839] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.114848] kasan_report+0x149/0x18d <4>[ 473.114962] ? i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.115069] i915_gem_create+0x1d2/0x1f0 [i915] <4>[ 473.115176] ? i915_gem_object_create.part.28+0x4b0/0x4b0 [i915] <4>[ 473.115289] ? i915_gem_dumb_create+0x1a0/0x1a0 [i915] <4>[ 473.115297] drm_ioctl_kernel+0x192/0x260 <4>[ 473.115306] ? drm_ioctl_permit+0x280/0x280 <4>[ 473.115326] drm_ioctl+0x67c/0x960 <4>[ 473.115438] ? i915_gem_dumb_create+0x1a0/0x1a0 [i915] <4>[ 473.115448] ? drm_getstats+0x20/0x20 <4>[ 473.115459] ? __lock_acquire+0xa66/0x3fe0 <4>[ 473.115474] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4>[ 473.115485] ? debug_object_active_state+0x2ea/0x4e0 <4>[ 473.115496] ? debug_show_all_locks+0x2d0/0x2d0 <4>[ 473.115513] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.115522] ? check_flags.part.27+0x440/0x440 <4>[ 473.115532] ? ioctl_preallocate+0x1a0/0x1a0 <4>[ 473.115547] ? __fget+0x2ac/0x410 <4>[ 473.115561] ? __ia32_sys_dup3+0xb0/0xb0 <4>[ 473.115569] ? rwlock_bug.part.0+0x90/0x90 <4>[ 473.115590] ksys_ioctl+0x35/0x70 <4>[ 473.115597] ? lockdep_hardirqs_off+0x1cb/0x2b0 <4>[ 473.115608] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.115614] ? lockdep_hardirqs_on+0x342/0x590 <4>[ 473.115623] do_syscall_64+0x97/0x400 <4>[ 473.115633] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 473.115641] RIP: 0033:0x7fce590d55d7 <4>[ 473.115649] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 <4>[ 473.115655] RSP: 002b:00007fce4d525ba8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 <4>[ 473.115662] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fce590d55d7 <4>[ 473.115667] RDX: 00007fce4d525c10 RSI: 00000000c010645b RDI: 0000000000000007 <4>[ 473.115672] RBP: 00007fce4d525c10 R08: 00007fce4d526700 R09: 00007fce4d526700 <4>[ 473.115677] R10: 0000000000000054 R11: 0000000000000246 R12: 00000000c010645b <4>[ 473.115682] R13: 0000000000000007 R14: 0000000000000000 R15: 00007ffe0e4a7450 <3>[ 473.115731] Allocated by task 1541: <4>[ 473.115766] kmem_cache_alloc+0xce/0x290 <4>[ 473.115895] i915_gem_object_create.part.28+0x1c/0x4b0 [i915] <4>[ 473.116000] i915_gem_create+0xe3/0x1f0 [i915] <4>[ 473.116008] drm_ioctl_kernel+0x192/0x260 <4>[ 473.116013] drm_ioctl+0x67c/0x960 <4>[ 473.116020] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.116026] ksys_ioctl+0x35/0x70 <4>[ 473.116032] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.116038] do_syscall_64+0x97/0x400 <4>[ 473.116044] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 473.116071] Freed by task 1542: <4>[ 473.116101] kmem_cache_free+0xb7/0x2f0 <4>[ 473.116205] __i915_gem_free_objects+0x7d4/0xe10 [i915] <4>[ 473.116311] i915_gem_create_ioctl+0xaa/0xd0 [i915] <4>[ 473.116318] drm_ioctl_kernel+0x192/0x260 <4>[ 473.116323] drm_ioctl+0x67c/0x960 <4>[ 473.116330] do_vfs_ioctl+0x18d/0xfa0 <4>[ 473.116335] ksys_ioctl+0x35/0x70 <4>[ 473.116341] __x64_sys_ioctl+0x6a/0xb0 <4>[ 473.116347] do_syscall_64+0x97/0x400 <4>[ 473.116354] entry_SYSCALL_64_after_hwframe+0x49/0xbe Testcase: igt/gem_flink_race/flink_close Fixes: e163484a ("drm/i915: Update size upon return from GEM_CREATE") Signed-off-by:
-
Chris Wilson authored
Sometimes the HW doesn't even play fair, and completely forgets about register writes. Skip verifying known troublemakers. References: https://bugs.freedesktop.org/show_bug.cgi?id=108954Signed-off-by:
-
Chris Wilson authored
Read the engine workarounds back using the GPU after loading the initial context state to verify that we are setting them correctly, and bail if it fails. v2: Break out the verification into its own loop Signed-off-by:
-
Chris Wilson authored
Immediately after writing the workaround, verify that it stuck in the register. References: https://bugs.freedesktop.org/show_bug.cgi?id=108954Signed-off-by:
-
Joonas Lahtinen authored
Signed-off-by:Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Jani Nikula authored
The cdclk init/uninit code was changed by commit 93a643f2 ("drm/i915/cdclk: have only one init/uninit function") between the versions of commit 39564ae8 ("drm/i915/ehl: Inherit Ice Lake conditional code"). What got merged fails to do cdclk init/uninit on ehl. Fixes: 39564ae8 ("drm/i915/ehl: Inherit Ice Lake conditional code") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Bob Paauwe <bob.j.paauwe@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190416082852.18141-1-jani.nikula@intel.com
-
Chris Wilson authored
SSEU reprogramming of the context introduced the notion of engine class and instance for a forwards compatible method of describing any engine beyond the old execbuf interface. We wish to adopt this class:instance description for more interfaces, so pull it out into a separate type for userspace convenience. Fixes: e46c2e99 ("drm/i915: Expose RPCS (SSEU) configuration to userspace (Gen11 only)") Signed-off-by:
Tony Ye <tony.ye@intel.com> Reviewed-by:
Andi Shyti <andi@etezian.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190412071416.30097-1-chris@chris-wilson.co.uk
-
- 16 Apr, 2019 11 commits
-
-
Paulo Zanoni authored
Make them take the uncore argument from the caller instead of passing the implicit &dev_priv->uncore directly. This will allow us to finally pass something that's not dev_priv->uncore in the future, and gets rid of the implicit variables in register macros. v2: Rebase on top of the newer patches. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-6-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
The IRQ initialization helpers are simple and self-contained. Continue the transition started in the recent uncore rework to get us rid of I915_READ/WRITE and the implicit dev_priv variables. While the implicit dev_priv is removed from the IRQ initialization helpers, we didn't get rid of them in the macro callers. Doing that should be very simple now. v2: Rebase on top of the new patches. Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by:
-
Paulo Zanoni authored
This discussion started because we use token pasting in the GEN{2,3}_IRQ_INIT and GEN{2,3}_IRQ_RESET macros, so gen2-4 passes an empty argument to those macros, making the code a little weird. The original proposal was to just add a comment as the empty argument, but Ville suggested we just add a prefix to the registers, and that indeed sounds like a more elegant solution. Now doing this is kinda against our rules for register naming since we only add gens or platform names as register prefixes when the given gen/platform changes a register that already existed before. On the other hand, we have so many instances of IIR/IMR in comments that adding a prefix would make the users of these register more easily findable, in addition to make our token pasting macros actually readable. So IMHO opening an exception here is worth it. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Paulo Zanoni authored
Like the gen3+ macros, the gen2 versions of the IRQ initialization macros take the register name in the 'type' argument. But gen2 only has one set of registers, so there's really no need to specify the type. This commit removes the type argument and uses the registers directly instead of passing them through variables. Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190410235344.31199-3-paulo.r.zanoni@intel.com
-
Paulo Zanoni authored
The whole point of having macros here is for the token pasting necessary to automatically have IMR, IIR and IER selected. We don't really need or want all the inlining that happens as a consequence. The good thing about the current code is that it works regardless of the relative offsets between these registers (they change after gen4, with the usual VLV/CHV exceptions). One thing which we can do is to split the logic of what we do with imr/ier/iir to functions separate from the macros that pick them. That's what we do in this commit. This allows us to get rid of the gen8 duplicates and also all the inlining: add/remove: 2/0 grow/shrink: 0/21 up/down: 384/-5949 (-5565) Function old new delta gen3_irq_reset - 233 +233 gen3_irq_init - 151 +151 i8xx_irq_postinstall 459 442 -17 gen11_irq_postinstall 804 744 -60 ironlake_irq_postinstall 450 353 -97 vlv_display_irq_postinstall 348 245 -103 i965_irq_postinstall 378 272 -106 i915_irq_postinstall 333 227 -106 gen8_irq_power_well_post_enable 374 240 -134 ironlake_irq_reset 397 218 -179 vlv_display_irq_reset 616 433 -183 i965_irq_reset 374 180 -194 cherryview_irq_reset 379 185 -194 i915_irq_reset 407 209 -198 ibx_irq_reset 332 133 -199 gen5_gt_irq_postinstall 533 332 -201 gen8_irq_power_well_pre_disable 434 204 -230 gen8_gt_irq_postinstall 469 196 -273 gen8_de_irq_postinstall 1200 836 -364 gen5_gt_irq_reset 471 76 -395 gen8_gt_irq_reset 775 99 -676 gen8_irq_reset 1100 333 -767 gen11_irq_reset 1959 686 -1273 Total: Before=2259222, After=2253657, chg -0.25% v2: - Make checkpatch happy with a temporary which_ (Checkpatch). - Reorder the arguments for the INIT macros (Ville). - Correctly explain when the register offsets change in the commit message (Ville). - Use more line breaks in the macro calls to make the arguments look a little more organized/readable. - Update the bloat-o-meter output (minor change only). Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (v1) Signed-off-by:
-
https://github.com/intel/gvt-linuxJoonas Lahtinen authored
gvt-next-2019-04-16 - Refine range of MCHBAR snapshot (Yakui) - Refine out-of-sync page struct (Yakui) - Remove unused vGPU sreg (Yan) - Refind MMIO reg names (Xiaolin) - Proper handling of sync/async flip (Colin) - Proper handling of PIPE_CONTROL/MI_FLUSH_DW index mode (Xiaolin) - EXCC reg mask fix (Colin) Signed-off-by:
-
Chris Wilson authored
drivers/gpu/drm/i915/intel_pm.c:8352:9: error: incompatible types in comparison expression (different address spaces) drivers/gpu/drm/i915/intel_pm.c:8359:9: error: incompatible types in comparison expression (different address spaces) Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190412085410.10392-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
Since removal of the "missed interrupt detection" nobody used the result of whether or not we signaled anybody during that invocation, so now remove the return value. References: 789659f4 ("drm/i915: Drop fake breadcrumb irq") Signed-off-by:
-
Colin Xu authored
According to GFX PRM on 01.org, bit 31:16 of mmio 0x22028 should be masks. Fixes: 17865713 ("drm/i915/gvt: vGPU context switch") Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Colin Xu <colin.xu@intel.com> Signed-off-by:
-
Xiaolin Zhang authored
with the introduce of "switch to use HWS indices rather than address", guest GPU hang observed when running workloads which will update the seqno to the real HW HWSP, not vitural GPU HWSP and then cause GPU hang. this patch is to revoke index mode in PIPE_CTRL and MI_FLUSH_DW and patch guest GPU HWSP address value to these commands. Fixes: 54939ea0 ("drm/i915: Switch to use HWS indices rather than addresses") Reviewed-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by:
-
Zhenyu Wang authored
Merge back drm-intel-next for engine name definition refinement and 54939ea0 ("drm/i915: Switch to use HWS indices rather than addresses") that would need gvt fixes to depend on. Signed-off-by:
-
- 15 Apr, 2019 2 commits
-
-
Manasi Navare authored
This is one of the patches to start replacing drm pointers and use the intel_atomic_state and intel_crtc to derive the necessary intel state variables required for the intel modeset functions. v3: * Remove the unwanted newline (Ville) v2: * Flip the function arguments (Ville) * Remove some remaining instances of drm pointers (Ville) * Use old_crtc_state and new_crtc_state (Ville) Suggested-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
Chris Wilson authored
If the driver is wedged, we can not issue the requests to exercise the timelines or the system across suspend, so skip the tests. live_hangcheck is there to fail if we cannot recover. Signed-off-by:
-
- 13 Apr, 2019 1 commit
-
-
Chris Wilson authored
Start weaning ourselves off the implicit I915_WRITE macro madness and start using the explicit intel_uncore mmio access. Signed-off-by:
-
- 12 Apr, 2019 2 commits
-
-
Bob Paauwe authored
Most of the conditional code for ICELAKE also applies to ELKHARTLAKE so use IS_GEN(dev_priv, 11) even for PM and Workarounds for now. v2: - Rename commit (Jose) - Include a wm workaround (Jose and Lucas) - Include display core init (Jose and Lucas) v3: Add a missing case of gen greater-than 11 (Jose) Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Mika Kuoppala authored
If cat error is set, we need to clear it by acking it. Further, if it is set, we must not do a normal request for reset. v2: avoid goto (Chris) v3: comment, error format, direct assign (Chris) Bspec: 12567 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
