- 12 Sep, 2018 10 commits
-
-
Gerd Hoffmann authored
Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20180911134216.9760-11-kraxel@redhat.com
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Create variable for the list length limit. Serves as documentation, also allows to make it a module parameter if needed. Also add a total size limit. Signed-off-by:
-
Gerd Hoffmann authored
udmabuf builds without it, but if userspace can not create memfd handles in the first place it is rather pointless to include it, except for test builds. Signed-off-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
Gerd Hoffmann authored
Reported-by:
-
- 11 Sep, 2018 10 commits
-
-
Haneen Mohammed authored
Add an initial kerneldoc entry for vkms with a todo list. Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> [danvet: Keep the todo.rst entry to point at the vkms docs instead.] Signed-off-by:
-
Haneen Mohammed authored
Cursor support is not complete yet. Add module option 'enable_cursor' to enable/disable cursor support which is used for testing currently. Signed-off-by:
-
Haneen Mohammed authored
This patch compute CRC for output frame with cursor and primary plane. Blend cursor with primary plane and compute CRC on the resulted frame. This currently passes cursor-size-change, and cursor-64x64-[onscreen, offscreen, sliding, random, dpms, rapid-movement] from igt kms_cursor_crc tests. Signed-off-by:
-
Haneen Mohammed authored
Add cursor plane support and update vkms_plane_atomic_check to enable positioning cursor plane. Signed-off-by:
-
Daniel Vetter authored
For buffer sharing, use dma-buf instead. We can't set smem_start to 0 unconditionally since that's used by the fbdev mmap default implementation. And we have plenty of userspace which would like to keep that working. This might break legit userspace - if it does we need to look at a case-by-cases basis how to handle that. Worst case I expect overrides for only specific drivers, since anything remotely modern should be using dma-buf/prime now (which is about 7 years old now for DRM drivers). This issue was uncovered because Noralf's rework to implement a generic fb_probe also implements it's own fb_mmap callback. Which means smem_start didn't have to be set anymore, which blew up some blob in userspace rather badly. Acked-by:
Sean Paul <seanpaul@chromium.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: John Stultz <john.stultz@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180822085405.10787-4-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
DRM drivers really, really, really don't want random userspace to share buffer behind it's back, bypassing the dma-buf buffer sharing machanism. For that reason we've ruthlessly rejected any IOCTL exposing the physical address of any graphics buffer. Unfortunately fbdev comes with that built-in. We could just set smem_start to 0, but that means we'd have to hand-roll our own fb_mmap implementation. For good reasons many drivers do that, but smem_start/length is still super convenient. Hence instead just stop the leak in the ioctl, to keep fb mmap working as-is. A second patch will set this flag for all drm drivers. Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kees Cook <keescook@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: linux-fbdev@vger.kernel.org Signed-off-by:
-
Daniel Vetter authored
It was only used by the panic support in fbcon, which is now gone. Remove this now dead code too. Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Joe Perches <joe@perches.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Meng Xu <mengxu.gatech@gmail.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Thomas Meyer <thomas@m3y3r.de> Cc: Mike Frysinger <vapier@chromium.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Thierry Reding <treding@nvidia.com> Cc: David Lechner <david@lechnology.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by:
-
Daniel Vetter authored
This was only added for the drm's fbdev emulation support, so that it would try harder to show the Oops. Unfortunately this never really worked reliably, and in practice ended up pushing the real Oops off the screen due to plentyfull locking, sleep-while-atomic and other issues. So we removed all that support from the fbdev emulation a while back. Aside: We've also removed the kgdb support, for similar reasons. Since it's such a small patch I figured I don't split this up into the usual 3-phase removal. Acked-by:
-
Alexandru Gheorghe authored
DRM_MODE_REFLECT_X and DRM_MODE_REFLECT_Y meaning seems a bit unclear to me, so try to clarify that with a bit of ascii graphics. Changes since v1: - Move the ascii graphics in the kerneldoc where all plane properties are already documented and make sure it's properly rendered, suggestested by Daniel Vetter. Signed-off-by:Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Reviewed-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/drm_plane.c: In function 'drm_mode_getplane_res': drivers/gpu/drm/drm_plane.c:475:26: warning: variable 'config' set but not used [-Wunused-but-set-variable] Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
- 10 Sep, 2018 7 commits
-
-
Marc Zyngier authored
Leaving the DRM driver enabled on reboot or kexec has the annoying effect of leaving the display generating transactions whilst the IOMMU has been shut down. In turn, the IOMMU driver (which shares its interrupt line with the VOP) starts warning either on shutdown or when entering the secondary kernel in the kexec case (nothing is expected on that front). A cheap way of ensuring that things are nicely shut down is to register a shutdown callback in the platform driver. Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Tested-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180805124807.18169-1-marc.zyngier@arm.com Cc: stable@vger.kernel.org
-
Peter Wu authored
Clarify the relation between drm_fb_helper_fbdev_setup/teardown. Clarify requirements for the new generic fbdev emulation API and log some more details in case the driver does something wrong. Fix related typos. Cc: Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Reviewed-by:
-
Peter Wu authored
The drm_get_pci_dev API is deprecated, replace it by drm_dev_register. Signed-off-by:
-
Peter Wu authored
Currently unloading bochs_drm (after unbinding the vtconsole) results in a warning about a leaked connector: [drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked! While investigating a potential fix I noticed that a lot of open-coded functionality is already implemented elsewhere, so start converting it: bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl). bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding "struct drm_framebuffer" from "struct bochs_framebuffer". Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c. For this to work, the GEM object is moved into "drm_framebuffer". After that, "bochs_framebuffer" is no longer needed and therefore removed. Remove the unused "size" and "initialized" fields from fb, the latter is not necessary as drm_fb_helper_fbdev_teardown can be called even if bochsfb_create fails. This theory was tested by returning early and late (just before drm_gem_fbdev_fb_create). Both scenarios fail gracefully although the latter seems to leak the object from bochsfb_create_object (not a regression). Guess on the reason for the encoder leak: drm_framebuffer_cleanup was previously used, but did not destroy much. drm_fb_helper_fbdev_teardown is now used and calls drm_framebuffer_remove which does a bit more work. Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm' and also with Xorg + fbdev (startx -> xterm). The latter triggered a warning in ttm_bo_vm_open that existed before, see https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.deAcked-by: -
Peter Wu authored
The "initialized" member is going away. suspend/resume still works (even if bochsfb_create is forced to fail). Signed-off-by:
-
Gerd Hoffmann authored
Drivers must set the quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb() compat code work correctly on bigendian machines. If they don't they interpret pixel_format values incorrectly for bug compatibility, which in turn implies the ADDFB2 ioctl does not work correctly then. So block it to make userspace fallback to ADDFB. Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/virtio/virtgpu_display.c: In function 'virtio_gpu_framebuffer_init': drivers/gpu/drm/virtio/virtgpu_display.c:78:28: warning: variable 'bo' set but not used [-Wunused-but-set-variable] struct virtio_gpu_object *bo; ^ Signed-off-by:
-
- 09 Sep, 2018 7 commits
-
-
Daniel Vetter authored
This leaves all the commit/check and state handling in drm_atomic.c, while pulling all the uapi glue and the huge ioctl itself into a seprate file. This seems to almost perfectly split the rather big drm_atomic.c file into 2 equal sizes. Also adjust the kerneldoc and type a very terse overview text. v2: Rebase. v3: Fix tiny typo. v4: - Fixup armada, newly converted atomic driver hooray! - Fixup msm/dpu1, newly added too. Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-7-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
- drmP.h is now fully split up. - vkms is happening (and will gain its own todo and docs under a new vkms.rst file real soon) - legacy cruft is completely hidden now, drm_vblank.c is split out from drm_irq.c now. I've decided to drop the task to split out drm_legacy.ko, partially because Dave already rejected a patch to hide the old dri1 drivers better. Current state feels good enough to me. - best_encoder atomic cleanup is done (it's now the default, not even exported anymore) - bunch of smaller things v2: - Explain why the drm_legacy.ko task is dropped (Emil). - typos (Sam). v3: Fix typo (Ilia) Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
-
Daniel Vetter authored
Remove the kerneldoc and EXPORT_SYMBOL which aren't used and really shouldn't ever be used by drivers directly. Unfortunately this means we need to move the set_writeback_fb function around to avoid a forward decl. Acked-by:
-
Daniel Vetter authored
This is starting to become easy! v2: Compiles now, with drm/drm_util.h extracted. v3: Fix up commit message (Sam Ravnborg) Reviewed-by:
-
Daniel Vetter authored
Just a bit of missing includes and pre declarations. v2: Compiles now, with drm/drm_util.h extracted. v3: Rebase v3: Fix up commit message (Sam Ravnborg) Reviewed-by:
-
Daniel Vetter authored
Only needed minimal changes in drm_internal.h (for the drm_ioctl_t type and a few forward declarations), plus a few missing includes in drm_connector.c. Yay, the last stage of the drm header cleanup can finally commence! v2: Compiles now, with drm/drm_util.h extracted. v3: Fix up commit message (Sam Ravnborg) Reviewed-by:
-
Daniel Vetter authored
We have a bunch of neat little macros all over the place which should move to kernel.h. But some of them died in bikesheds on lkml, and we need a decent home for them. Start out by moving the for_each_if macro there. v2: Rename to drm_util.h instead (Dave&Sean) Cc: Sean Paul <seanpaul@chromium.org> Acked-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
- 07 Sep, 2018 5 commits
-
-
Michał Mirosław authored
Copy remove*_conflicting_framebuffers() kerneldocs from fbdev code to make DRM developers' life easier. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
As noticed by kbuild test robot <lkp@intel.com>, remove_conflicting_pci_framebuffers()'s second argument is called res_id not resource_id. Fix this. Signed-off-by:
-
Jonathan Liu authored
The hardware supports dithering on TCON channel 0 which is used for LCD panels. Dithering is a method of approximating a color from a mixture of other colors when the required color isn't available. It reduces color banding artifacts that can be observed when displaying gradients (e.g. grayscale gradients). This may occur when the image that needs to be displayed is 24-bit but the LCD panel is a lower bit depth and does not perform dithering on its own. Signed-off-by:
Jonathan Liu <net147@gmail.com> [wens@csie.org: check display_info.bpc first; handle LVDS and MIPI DSI] Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-4-wens@csie.org
-
Chen-Yu Tsai authored
Dithering is only supported for TCON channel 0. Throughout the datasheet all the names associated with these register are prefixed "TCON0", instead of "TCON". The only exception is the control register "TCON_FRM_CTL_REG". Rename the macros to reflect this. Signed-off-by:
-
Chen-Yu Tsai authored
sun4i_tcon0_mode_set_cpu() currently accepts struct mipi_dsi_device * as its second parameter. This is derived from drm_encoder. The DSI encoder is tied to the CPU interface mode of the TCON as a special case. In theory, if hardware were available, we could also support normal CPU interface modes. It is better to pass the generic encoder instead of the specialized mipi_dsi_device, and handle the differences inside the function. Passing the encoder would also enable the function to pass it, or any other data structures related to it, to other functions expecting it. One such example would be dithering support that will be added in a later patch, which looks at properties tied to the connector to determine whether dithering should be enabled or not. Signed-off-by:
-
- 06 Sep, 2018 1 commit
-
-
Chunming Zhou authored
we can place a fence to a timeline point after expanded. v2: change func parameter order Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
