Skip to content

L
linux
Switch branch/tag
  1. 05 Mar, 2005 19 commits
  3. 04 Mar, 2005 15 commits
  5. 03 Mar, 2005 6 commits
    • Nicolas Pitre's avatar
      [ARM PATCH] 2509/1: fix watchdog timer frequency for PXA27x · 6a5d4f1d
      Nicolas Pitre authored 
      Patch from Nicolas Pitre

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King
      6a5d4f1d
    • Ben Dooks's avatar
      [ARM PATCH] 2512/1: S3C2410 - remove bast-cpld.h from include/asm-arm/arch-s3c2410/hardware.h · 1234c028
      Ben Dooks authored 
      Patch from Ben Dooks

Remove the include of bast-cpld.h, as it shouldn't be here as
it only defines some extra bast-specific registers, and does
not affect the configuration of the hardware dependenat items.
Ensure that the file is included in the one place it is needed
and not included.
This should discourage anyone else putting include files in
which do not affect the over-all hardware definitions.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King
      1234c028
    • Ben Dooks's avatar
      [ARM PATCH] 2511/1: SMDK2440 - base machine support · 14114680
      Ben Dooks authored 
      Patch from Ben Dooks

SMDK2440 core board support

Signed-off-by: Ben Dooks

Signed-off-by: Dimitry Andric
Signed-off-by: Russell King
      14114680
    • Ben Dooks's avatar
      [ARM PATCH] 2508/1: S3C2440 - timer and irq device updates · f25b6a27
      Ben Dooks authored 
      Patch from Ben Dooks

The patch does a number of updates, which are inter-dependant
on each other, for the s3c2440 support and some clean-ups for
all s3c24xx architecture in general.
1) Remove the s3c24xx_{fclk,hclk,pclk} variables, and pass
   these values to the clock core on initialisation. This
   removes the needless double copy, as only the timer code
   uses these directly (see point 4).
   Add an over-all xtal clock to the clock core
2) Add a sysdev driver to the clock code to ensure all the
   s3c2440 clocks are added if an s3c2440 is present.
3) Add the new IRQs to irq.c, and initialise them if the
   sysdev for the s3c2440 is present.
4) Change the timer code to request the timer clk and
   use it to get the frequency.
Depends on patch 2467/1
Thanks to Guillaume Gourat for the original patches that
prompted this re-write.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King
      f25b6a27
    • Lennert Buytenhek's avatar
      [ARM PATCH] 2491/1: make ixp2000 use section mappings for on-chip registers · cd4ad67d
      Lennert Buytenhek authored 
      Patch from Lennert Buytenhek

This patch makes the ixp2000 port use section mappings for on-chip
registers.  This has two advantages:
1. It saves some TLB entries.
2. It enables us to work around ixp2400 erratum #66, for which the
   suggested (and only) fix involves mapping all on-chip registers
   using XCB=101 instead of XCB=000.
This patch was derived from an older patch for the same erratum
(ARM patch ID 2265/1), made by Deepak Saxena.
Note that this patch does not actually constitute a workaround for
erratum #66, it merely lays the foundation for such a workaround.

Signed-off-by: Lennert BuytenhekSigned-off-by: Deepak Saxena
Signed-off-by: Russell King
      cd4ad67d
    • John Lenz's avatar
      [ARM PATCH] 2461/1: base support for poodle machine · 35786727
      John Lenz authored 
      Patch from John Lenz

Adds support for the Sharp Zaurus SL-5600
Add the ability to compile any collection of poodle and
corgi support under the PXA_SHARPSL option.
arch/arm/boot/compressed/head-sharpsl.S already has code
to detect the poodle machine.

Signed-off-by: John Lenz
Signed-off-by: Russell King
      35786727
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7