- 30 Jan, 2015 2 commits
-
-
Radim Krčmář authored
And don't export the internal ones while at it. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Kai Huang authored
This patch adds PML support in VMX. A new module parameter 'enable_pml' is added to allow user to enable/disable it manually. Signed-off-by:
Kai Huang <kai.huang@linux.intel.com> Reviewed-by:
Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by:
-
- 29 Jan, 2015 5 commits
-
-
Kai Huang authored
This patch adds new kvm_x86_ops dirty logging hooks to enable/disable dirty logging for particular memory slot, and to flush potentially logged dirty GPAs before reporting slot->dirty_bitmap to userspace. kvm x86 common code calls these hooks when they are available so PML logic can be hidden to VMX specific. SVM won't be impacted as these hooks remain NULL there. Signed-off-by:
-
Kai Huang authored
This patch changes the second parameter of kvm_mmu_slot_remove_write_access from 'slot id' to 'struct kvm_memory_slot *' to align with kvm_x86_ops dirty logging hooks, which will be introduced in further patch. Better way is to change second parameter of kvm_arch_commit_memory_region from 'struct kvm_userspace_memory_region *' to 'struct kvm_memory_slot * new', but it requires changes on other non-x86 ARCH too, so avoid it now. Signed-off-by:
-
Kai Huang authored
This patch avoids unnecessary dirty GPA logging to PML buffer in EPT violation path by setting D-bit manually prior to the occurrence of the write from guest. We only set D-bit manually in set_spte, and leave fast_page_fault path unchanged, as fast_page_fault is very unlikely to happen in case of PML. For the hva <-> pa change case, the spte is updated to either read-only (host pte is read-only) or be dropped (host pte is writeable), and both cases will be handled by above changes, therefore no change is necessary. Signed-off-by:
-
Kai Huang authored
This patch adds new mmu layer functions to clear/set D-bit for memory slot, and to write protect superpages for memory slot. In case of PML, CPU logs the dirty GPA automatically to PML buffer when CPU updates D-bit from 0 to 1, therefore we don't have to write protect 4K pages, instead, we only need to clear D-bit in order to log that GPA. For superpages, we still write protect it and let page fault code to handle dirty page logging, as we still need to split superpage to 4K pages in PML. As PML is always enabled during guest's lifetime, to eliminate unnecessary PML GPA logging, we set D-bit manually for the slot with dirty logging disabled. Signed-off-by:
-
Kai Huang authored
We don't have to write protect guest memory for dirty logging if architecture supports hardware dirty logging, such as PML on VMX, so rename it to be more generic. Signed-off-by:
-
- 27 Jan, 2015 2 commits
-
-
Tiejun Chen authored
Indeed, any invalid memslots should be new->npages = 0, new->base_gfn = 0 and new->flags = 0 at the same time. Signed-off-by:
Tiejun Chen <tiejun.chen@intel.com> Signed-off-by:
-
Joerg Roedel authored
When assigning devices to large memory guests (>=128GB guest memory in the failure case) the functions to create the IOMMU page-tables for the whole guest might run for a very long time. On non-preemptible kernels this might cause Soft-Lockup warnings. Fix these by adding a cond_resched() to the mapping and unmapping loops. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
- 26 Jan, 2015 7 commits
-
-
Nadav Amit authored
On long-mode, when far call that changes cs.l takes place, the stack size is determined by the new mode. For instance, if we go from 32-bit mode to 64-bit mode, the stack-size if 64. KVM uses the old stack size. Fix it. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
Nadav Amit authored
If we got a wraparound of 32-bit operand, and the limit is 0xffffffff, read and writes should be successful. It just needs to be done in two segments. Signed-off-by:
-
Nadav Amit authored
Unnecassary define was left after commit 7d882ffa ("KVM: x86: Revert NoBigReal patch in the emulator"). Commit 39f062ff ("KVM: x86: Generate #UD when memory operand is required") was missing undef. Fix it. Signed-off-by:
-
Nadav Amit authored
ARPL and MOVSXD are encoded the same and their execution depends on the execution mode. The operand sizes of each instruction are different. Currently, ARPL is detected too late, after the decoding was already done, and therefore may result in spurious exception (instead of failed emulation). Introduce a group to the emulator to handle instructions according to execution mode (32/64 bits). Note: in order not to make changes that may affect performance, the new ModeDual can only be applied to instructions with ModRM. Signed-off-by:
-
Nadav Amit authored
The IRET instruction should clear NMI masking, but the current implementation does not do so. Signed-off-by:
-
Nadav Amit authored
Indeed, Intel SDM specifically states that for the RET instruction "In 64-bit mode, the default operation size of this instruction is the stack-address size, i.e. 64 bits." However, experiments show this is not the case. Here is for example objdump of small 64-bit asm: 4004f1: ca 14 00 lret $0x14 4004f4: 48 cb lretq 4004f6: 48 ca 14 00 lretq $0x14 Therefore, remove the Stack flag from far-ret instructions. Signed-off-by:
-
Nadav Amit authored
Intel SDM says for CMPXCHG: "To simplify the interface to the processorâ€
™ s bus, the destination operand receives a write cycle without regard to the result of the comparison.". This means the destination page should be dirtied. Fix it to by writing back the original value if cmpxchg failed. Signed-off-by:
-
- 23 Jan, 2015 24 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-next-20150122' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next KVM: s390: fixes and features for kvm/next (3.20) 1. Generic - sparse warning (make function static) - optimize locking - bugfixes for interrupt injection - fix MVPG addressing modes 2. hrtimer/wakeup fun A recent change can cause KVM hangs if adjtime is used in the host. The hrtimer might wake up too early or too late. Too early is fatal as vcpu_block will see that the wakeup condition is not met and sleep again. This CPU might never wake up again. This series addresses this problem. adjclock slowing down the host clock will result in too late wakeups. This will require more work. In addition to that we also change the hrtimer from REALTIME to MONOTONIC to avoid similar problems with timedatectl set-time. 3. sigp rework We will move all "slow" sigps to QEMU (protected with a capability that can be enabled) to avoid several races between concurrent SIGP orders. 4. Optimize the shadow page table Provide an interface to announce the maximum guest size. The kernel will use that to make the pagetable 2,3,4 (or theoretically) 5 levels. 5. Provide an interface to set the guest TOD We now use two vm attributes instead of two oneregs, as oneregs are vcpu ioctl and we don't want to call them from other threads. 6. Protected key functions The real HMC allows to enable/disable protected key CPACF functions. Lets provide an implementation + an interface for QEMU to activate this the protected key instructions.
-
Paolo Bonzini authored
Merge tag 'kvm-arm-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next KVM/ARM changes for v3.20 including GICv3 emulation, dirty page logging, added trace symbols, and adding an explicit VGIC init device control IOCTL. Conflicts: arch/arm64/include/asm/kvm_arm.h arch/arm64/kvm/handle_exit.c
-
Jens Freimann authored
Setting inti->type again is unnecessary here, so let's remove this. Acked-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Jens Freimann authored
When we convert interrupt data from struct kvm_s390_interrupt to struct kvm_s390_irq we need to check the data in the input parameter not the output parameter. Acked-by:
-
David Hildenbrand authored
We have to delete the allocated interrupt info if __inject_vm() fails. Otherwise user space can keep flooding kvm with floating interrupts and provoke more and more memory leaks. Reported-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.15+ Signed-off-by:
-
Tony Krowiak authored
Created new KVM device attributes for indicating whether the AES and DES/TDES protected key functions are available for programs running on the KVM guest. The attributes are used to set up the controls in the guest SIE block that specify whether programs running on the guest will be given access to the protected key functions available on the s390 hardware. Signed-off-by:
Tony Krowiak <akrowiak@linux.vnet.ibm.com> Reviewed-by:
Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by:
-
Jason J. Herne authored
Provide controls for setting/getting the guest TOD clock based on the VM attribute interface. Provide TOD and TOD_HIGH vm attributes on s390 for managing guest Time Of Day clock value. TOD_HIGH is presently always set to 0. In the future it will contain a high order expansion of the tod clock value after it overflows the 64-bits of the TOD. Signed-off-by:
Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by:
-
Jens Freimann authored
When injecting SIGP set prefix or a machine check, we trace the values in our per-vcpu local_int data structure instead of the parameters passed to the function. Fix this by changing the trace statement to use the correct values. Reviewed-by:
-
Jens Freimann authored
Currently we are always setting the wrong bit in the bitmap for pending emergency signals. Instead of using emerg.code from the passed in irq parameter, we use the value in our per-vcpu local_int structure, which is always zero. That means all emergency signals will have address 0 as parameter. If two CPUs send a SIGP to the same target, one might be lost. Let's fix this by using the value from the parameter and also trace the correct value. Reviewed-by:
-
Thomas Huth authored
The handler for MVPG partial execution interception does not take the current CPU addressing mode into account yet, so addresses are always treated as 64-bit addresses. For correct behaviour, we should properly handle 24-bit and 31-bit addresses, too. Since MVPG is defined to work with logical addresses, we can simply use guest_translate_address() to achieve the required behaviour (since DAT is disabled here, guest_translate_address() skips the MMU translation and only translates the address via kvm_s390_logical_to_effective() and kvm_s390_real_to_abs(), which is exactly what we want here). Signed-off-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by:
-
Christian Borntraeger authored
The kvm mutex was (probably) used to protect against cpu hotplug. The current code no longer needs to protect against that, as we only rely on CPU data structures that are guaranteed to be available if we can access the CPU. (e.g. vcpu_create will put the cpu in the array AFTER the cpu is ready). Signed-off-by:
-
David Hildenbrand authored
Most SIGP orders are handled partially in kernel and partially in user space. In order to: - Get a correct SIGP SET PREFIX handler that informs user space - Avoid race conditions between concurrently executed SIGP orders - Serialize SIGP orders per VCPU We need to handle all "slow" SIGP orders in user space. The remaining ones to be handled completely in kernel are: - SENSE - SENSE RUNNING - EXTERNAL CALL - EMERGENCY SIGNAL - CONDITIONAL EMERGENCY SIGNAL According to the PoP, they have to be fast. They can be executed without conflicting to the actions of other pending/concurrently executing orders (e.g. STOP vs. START). This patch introduces a new capability that will - when enabled - forward all but the mentioned SIGP orders to user space. The instruction counters in the kernel are still updated. Reviewed-by:
-
David Hildenbrand authored
We need a way to clear the async pfault queue from user space (e.g. for resets and SIGP SET ARCHITECTURE). This patch simply clears the queue as soon as user space sets the invalid pfault token. The definition of the invalid token is moved to uapi. Signed-off-by:
-
David Hildenbrand authored
Only one external call may be pending at a vcpu at a time. For this reason, we have to detect whether the SIGP externcal call interpretation facility is available. If so, all external calls have to be injected using this mechanism. SIGP EXTERNAL CALL orders have to return whether another external call is already pending. This check was missing until now. SIGP SENSE hasn't returned yet in all conditions whether an external call was pending. If a SIGP EXTERNAL CALL irq is to be injected and one is already pending, -EBUSY is returned. Reviewed-by:
-
David Hildenbrand authored
This patch introduces the infrastructure to check whether the SIGP Interpretation Facility is installed on all VCPUs in the configuration. Signed-off-by:
-
David Hildenbrand authored
This patch cleanes up the the SIGP SET PREFIX code. A SIGP SET PREFIX irq may only be injected if the target vcpu is stopped. Let's move the checking code into the injection code and return -EBUSY if the target vcpu is not stopped. Reviewed-by:
-
David Hildenbrand authored
As a SIGP STOP is an interrupt with the least priority, it may only result in stop of the vcpu when no other interrupts are left pending. To detect whether a non-stop irq is pending, we need a way to mask out stop irqs from the general kvm_cpu_has_interrupt() function. For this reason, the existing function (with an outdated name) is replaced by kvm_s390_vcpu_has_irq() which allows to mask out pending stop irqs. Acked-by:
-
David Hildenbrand authored
This patch removes the famous action_bits and moves the handling of SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt. The new local interrupt infrastructure is used to track pending stop requests. STOP irqs are the only irqs that don't get actively delivered. They remain pending until the stop function is executed (=stop intercept). If another STOP irq is already pending, -EBUSY will now be returned (needed for the SIGP handling code). Migration of pending SIGP STOP (AND STORE STATUS) orders should now be supported out of the box. Signed-off-by:
-
David Hildenbrand authored
In order to get rid of the action_flags and to properly migrate pending SIGP STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember whether to store the status when stopping. For this reason, a new parameter (flags) for the SIGP STOP irq is introduced. These flags further define details of the requested STOP and can be easily migrated. Reviewed-by:
-
David Hildenbrand authored
Patch 0759d068 ("KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block") changed the way pending guest clock comparator interrupts are detected. It was assumed that as soon as the hrtimer wakes up, the condition for the guest ckc is satisfied. This is however only true as long as adjclock() doesn't speed up the monotonic clock. Reason is that the hrtimer is based on CLOCK_MONOTONIC, the guest clock comparator detection is based on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the TOD clock, the hrtimer wakes the target VCPU up too early and the target VCPU will not detect any pending interrupts, therefore going back to sleep. It will never be woken up again because the hrtimer has finished. The VCPU is stuck. As a quick fix, we have to forward the hrtimer until the guest clock comparator is really due, to guarantee properly timed wake ups. As the hrtimer callback might be triggered on another cpu, we have to make sure that the timer is really stopped and not currently executing the callback on another cpu. This can happen if the vcpu thread is scheduled onto another physical cpu, but the timer base is not migrated. So lets use hrtimer_cancel instead of try_to_cancel. A proper fix might be to introduce a RAW based hrtimer. Reported-by:
-
David Hildenbrand authored
The hrtimer that handles the wait with enabled timer interrupts should not be disturbed by changes of the host time. This patch changes our hrtimer to be based on a monotonic clock. Signed-off-by:
-
David Hildenbrand authored
We sometimes get an underflow for the sleep duration, which most likely won't result in the short sleep time we wanted. So let's check for sleep duration underflows and directly continue to run the guest if we get one. Acked-by:
-
Dominik Dingel authored
With commit c6c956b8 ("KVM: s390/mm: support gmap page tables with less than 5 levels") we are able to define a limit for the guest memory size. As we round up the guest size in respect to the levels of page tables we get to guest limits of: 2048 MB, 4096 GB, 8192 TB and 16384 PB. We currently limit the guest size to 16 TB, which means we end up creating a page table structure supporting guest sizes up to 8192 TB. This patch introduces an interface that allows userspace to tune this limit. This may bring performance improvements for small guests. Signed-off-by:
-
Dominik Dingel authored
As we will allow in a later patch to recreate gmaps with new limits, we need to make sure that vcpus get their reference for that gmap after they increased the online_vcpu counter, so there is no possible race. While we are doing this, we also can simplify the vcpu_init function, by moving ucontrol specifics to an own function. That way we also start now setting the kvm_valid_regs for the ucontrol path. Reviewed-by:
-
