- 26 May, 2005 1 commit
-
-
Matthew Wilcox authored
sym2 version 2.2.1: - Fix MMIO BAR detection (Thanks to Bob Picco) - Fix odd-sized transfers with a wide bus (Thanks to Larry Stephens) - Write posting fixes (Thanks to Thibaut Varene) - Change one of the GFP_KERNEL allocations back into a GFP_ATOMIC - Make CCB_BA() return a script-endian address - Move range checks and disabling of devices from the queuecommand path to slave_alloc() - Remove a warning in sym_setup_cdb() - Keep a pointer to the scsi_target instead of the scsi_dev in the tcb - Remove a check for the upper layers passing an oversized cmd - Replace CAM_REQ_ constants with the Linux DID_ constants - Replace CAM_DIR_ constants with the Linux DMA_ constants - Inline sym_read_parisc_pdc() on non-parisc systems Signed-off-by:James Bottomley <James.Bottomley@SteelEye.com>
-
- 20 May, 2005 39 commits
-
-
Mark Haverkamp authored
New code from the Adaptec driver. Performance enhancement for newer adapters. I hope that this isn't too big for a single patch. I believe that other than the few small cleanups mentioned, that the changes are all related. - Added Variable FIB size negotiation for new adapters. - Added support to maximize scatter gather tables and thus permit requests larger than 64KB/each. - Limit Scatter Gather to 34 elements for ROMB platforms. - aac_printf is only enabled with AAC_QUIRK_34SG - Large FIB ioctl support - some minor cleanup Passes sparse check. I have tested it on x86 and ppc64 machines. Signed-off-by: -
Ju, Seokmann authored
Signed-off by: Seokmann Ju <sju@lsil.com> Signed-off-by: -
Moore, Eric Dean authored
Bump driver version to 3.03.02 Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Signed-off-by:
-
Moore, Eric Dean authored
This patch contains update for mpi headers 1.5.9. Signed-off-by:
-
Moore, Eric Dean authored
* This patch clarifies help section in FUSION_MAX_SGE entry. Signed-off-by:
-
Moore, Eric Dean authored
This patch is originally From: Jesper Juhl <juhl-lkml@dif.dk> This patch gets rid of redundant NULL checks prior to calling kfree() in drivers/message/* There are also a few small whitespace changes in there. Signed-off-by:
-
Moore, Eric Dean authored
* adding pci id support for new Fibre chips, 949X and 939X * adding errata workaround - disabling PIO access except during fwdlb. Signed-off-by:
-
Patrick Mansfield authored
Save and restore the scmd->result, so that timed out commands do not return the result of the TEST UNIT READY or the start/stop commands. Code is already in place to save and restore the result for the request sense case. The previous version of this patch erroneously removed the "if" check, instead add a comment as to why the "if" is needed. Signed-off-by:
Patrick Mansfield <patmans@us.ibm.com> Signed-off-by:
-
James Bottomley authored
-
Christoph Hellwig authored
This document is rather rudimentary and totally outdated. Fortunately Documentation/scsi/scsi_mid_low_api.txt replaces it quite nicely. Signed-off-by: -
Tejun Heo authored
scsi_queue_insert() has four callers. Three callers call with timer disabled and one (the second invocation in scsi_dispatch_cmd()) calls with timer activated. scsi_queue_insert() used to always call scsi_delete_timer() and ignore the return value. This results in race with timer expiration. Remove scsi_delete_timer() call from scsi_queue_insert() and make the caller delete timer and check the return value. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
-
Tejun Heo authored
'if' tests which check if eh_action isn't NULL in both functions are always true. Remove the redundant if's as it can give wrong impressions. Signed-off-by:
-
Tejun Heo authored
scsi_reset_provider() calls scsi_delete_timer() on exit which isn't necessary. Remove it. Signed-off-by:
-
Gerd Knorr authored
Here is a incremental patch which switches the driver over to the new non-simple functions. Compile-tested. Signed-off-by:
Gerd Knorr <kraxel@bytesex.org> Signed-off-by:
-
Gerd Knorr authored
This patch adds a device driver for scsi media changer devices. Signed-off-by:
-
brking@us.ibm.com authored
Currently, during PCI hotplug remove, if the upper layer drivers of the attached devices send commands down as part of the remove action, like a CDROM, the hotplug action will hang forever due to the ipr driver returning SCSI_MLQUEUE_HOST_BUSY. Patch fixes this. Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
Adrian Bunk authored
The Coverity checker found that this for loop was wrong. This patch changes it to what seems to be intended. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Kai Makisara authored
This patch is against 2.6.12-rc3 + linus-patch from April 30. The patch contains the following fixes: - CAP_SYS_RAWIO is used instead of CAP_SYS_ADMIN; fix from Alan Cox - only direct sending of SCSI commands requires this permission - the st status is modified is successful unload is performed using SCSI_IOCTL_STOP_UNIT Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
brking@us.ibm.com authored
Bump driver version Signed-off-by:
-
brking@us.ibm.com authored
Bugme 4547. The following patch fixes a bug in ipr's error logging. Signed-off-by:
-
Jeremy Higdon authored
I discovered that the qla1280 driver does not send the correct status to the midlayer when it gets Queue Full or Busy from a device. Signed-off-by:
Jeremy Higdon <jeremy@sgi.com> Signed-off-by:
-
Moore, Eric Dean authored
Adjust link ordering in the Makefile. Also, the ioc->DoneCtx handles for mptspi/mptfc in the message frame. And I'm now not seeing the panic. Signed-off-by:
-
James Bottomley authored
Signed-off-by: -
Al Viro authored
Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Mark Haverkamp authored
This patch addresses the sparse -Wbitwise warnings that Christoph wanted me to eliminate. This mostly consisted of making data structure elements of hardware associated structures the __le* equivalent. Although there were a couple places where there was mixing of cpu and le variable math. These changes have been tested on both an x86 and ppc machine running bonnie++. The usage of the LE32_ALL_ONES macro has been eliminated. Signed-off-by:
Mark Haverkamp <markh@osdl.org> Signed-off-by:
-
Benoit Boissinot authored
This patch fixes the following warnings: drivers/scsi/dpt_i2o.c: In function ‘adpt_isr’: drivers/scsi/dpt_i2o.c:2030: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2031: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2042: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2043: warning: passing argument 2 of ‘writel’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2046: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2048: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2055: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2062: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2069: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c: In function ‘adpt_i2o_to_scsi’: drivers/scsi/dpt_i2o.c:2239: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2243: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2248: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast drivers/scsi/dpt_i2o.c:2259: warning: passing argument 1 of ‘readl’ makes pointer from integer without a cast It define variables which are only used with a type of 'void __iomem *' with this type instead of the incorrect 'unsigned long' type. It also remove pointless casts. Signed-off-by:
Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by:
-
Benoit Boissinot authored
This patch removes the array 'hbas' as it seems to be useless and redundant with the linked list hbas_chain. Signed-off-by:
-
Adrian Bunk authored
This patch makes some needlessly global functions static. Signed-off-by:
-
James Bottomley authored
From: Adrian Bunk <bunk@stusta.de> This patch contains cleanups including the following: - remove #ifdef'ed code for other OS's - remove other unused code - make needlessly global code static Signed-off-by:
-
Adrian Bunk authored
This patch makes a needlessly global struct static. Signed-off-by:
-
Adrian Bunk authored
This patch makes a needlessly global function static. Signed-off-by:
-
Tejun Heo authored
scsi_queue_insert() used to use blk_insert_request() for requeueing requests. This depends on the unobvious behavior of blk_insert_request() setting REQ_SPECIAL and REQ_SOFTBARRIER when requeueing. This patch makes scsi_queue_insert() use blk_requeue_request(). As REQ_SPECIAL means special requests and REQ_SOFTBARRIER is automatically handled by blk layer now, no flag needs to be set. Note that scsi_queue_insert() now calls scsi_run_queue() itself, and the prototype of the function is added right above scsi_queue_insert(). This is temporary, as later requeue path consolidation patchset removes scsi_queue_insert(). By adding temporary prototype, we can do away with unnecessarily moving functions. Signed-off-by:
-
Tejun Heo authored
scsi_requeue_request() used to use blk_insert_request() for requeueing requests. This depends on the unobvious behavior of blk_insert_request() setting REQ_SPECIAL and REQ_SOFTBARRIER when requeueing. This patch makes scsi_queue_insert() use blk_requeue_request(). As REQ_SPECIAL means special requests and REQ_SOFTBARRIER is automatically handled by blk layer now, no flag needs to be set. Signed-off-by:
-
Tejun Heo authored
blk_insert_request() has a unobivous feature of requeuing a request setting REQ_SPECIAL|REQ_SOFTBARRIER. SCSI midlayer was the only user and as previous patches removed the usage, remove the feature from blk_insert_request(). Only special requests should be queued with blk_insert_request(). All requeueing should go through blk_requeue_request(). Signed-off-by:
-
Tejun Heo authored
scsi_init_io() used to set REQ_SPECIAL when it fails sg allocation before requeueing the request by returning BLKPREP_DEFER. REQ_SPECIAL is being updated to mean special requests. So, remove REQ_SPECIAL setting. Signed-off-by:
-
Tejun Heo authored
This is the reworked version of the patch. It sets REQ_SOFTBARRIER in two places - in elv_next_request() on BLKPREP_DEFER and in blk_requeue_request(). Signed-off-by:
-
Andrew Vasquez authored
Original from: Christoph Hellwig <hch@lst.de> Modified and Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
James Bottomley authored
The fusion Kconfig forgets to set CONFIG_FUSION, which is required to get the upper makefile to descend into the fusion directory. Add this back as a variable and make the two upper level modules select it. Signed-off-by: -
Moore, Eric Dean authored
(1) mptfc.c: This driver is having module_init, module_exit, and probe. (2) mptfc.c: Registering for Fibre Channel pci ids are done from this module. (3) mptfc.c: Convert MODULE_PARM to module_param Signed-off-by:
-
