->dev is already assigned at the top of the function, remove the duplicate
one at the end.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-4-hch@lst.de

Invert the polarity and better name the flag so that the use case is
properly documented.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-3-hch@lst.de

Add a new API to check if calls to dma_sync_single_for_{device,cpu} are
required for a given DMA streaming mapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200629130359.2690853-2-hch@lst.de

John Fastabend says:

====================
Fix a splat introduced by recent changes to avoid skipping ingress policy
when kTLS is enabled. The RCU splat was introduced because in the non-TLS
case the caller is wrapped in an rcu_read_lock/unlock. But, in the TLS
case we have a reference to the psock and the caller did not wrap its
call in rcu_read_lock/unlock.

To fix extend the RCU section to include the redirect case which was
missed. From v1->v2 I changed the location a bit to simplify the code
some. See patch 1.

But, then Martin asked why it was not needed in the non-TLS case. The
answer for patch 1 was, as stated above, because the caller has the
rcu read lock. However, there was still a missing case where a BPF
user could in-theory line up a set of parameters to hit a case
where the code was entered from strparser side from a different context
then the initial caller. To hit this user would need a parser program
to return value greater than skb->len then an ENOMEM error could happen
in the strparser codepath triggering strparser to retry from a workqueue
and without rcu_read_lock original caller used. See patch 2 for details.

Finally, we don't actually have any selftests for parser returning a
value geater than skb->len so add one in patch 3. This is especially
needed because at least I don't have any code that uses the parser
to return value greater than skb->len. So I wouldn't have caught any
errors here in my own testing.

Thanks, John

v1->v2: simplify code in patch 1 some and add patches 2 and 3.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add a test to check strparser merging skbs is working.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159312681884.18340.4922800172600252370.stgit@john-XPS-13-9370

If an ingress verdict program specifies message sizes greater than
skb->len and there is an ENOMEM error due to memory pressure we
may call the rcv_msg handler outside the strp_data_ready() caller
context. This is because on an ENOMEM error the strparser will
retry from a workqueue. The caller currently protects the use of
psock by calling the strp_data_ready() inside a rcu_read_lock/unlock
block.

But, in above workqueue error case the psock is accessed outside
the read_lock/unlock block of the caller. So instead of using
psock directly we must do a look up against the sk again to
ensure the psock is available.

There is an an ugly piece here where we must handle
the case where we paused the strp and removed the psock. On
psock removal we first pause the strparser and then remove
the psock. If the strparser is paused while an skb is
scheduled on the workqueue the skb will be dropped on the
flow and kfree_skb() is called. If the workqueue manages
to get called before we pause the strparser but runs the rcvmsg
callback after the psock is removed we will hit the unlikely
case where we run the sockmap rcvmsg handler but do not have
a psock. For now we will follow strparser logic and drop the
skb on the floor with skb_kfree(). This is ugly because the
data is dropped. To date this has not caused problems in practice
because either the application controlling the sockmap is
coordinating with the datapath so that skbs are "flushed"
before removal or we simply wait for the sock to be closed before
removing it.

This patch fixes the describe RCU bug and dropping the skb doesn't
make things worse. Future patches will improve this by allowing
the normal case where skbs are not merged to skip the strparser
altogether. In practice many (most?) use cases have no need to
merge skbs so its both a code complexity hit as seen above and
a performance issue. For example, in the Cilium case we always
set the strparser up to return sbks 1:1 without any merging and
have avoided above issues.

Fixes: e91de6af ("bpf: Fix running sk_skb program types with ktls")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/159312679888.18340.15248924071966273998.stgit@john-XPS-13-9370

There are two paths to generate the below RCU splat the first and
most obvious is the result of the BPF verdict program issuing a
redirect on a TLS socket (This is the splat shown below). Unlike
the non-TLS case the caller of the *strp_read() hooks does not
wrap the call in a rcu_read_lock/unlock. Then if the BPF program
issues a redirect action we hit the RCU splat.

However, in the non-TLS socket case the splat appears to be
relatively rare, because the skmsg caller into the strp_data_ready()
is wrapped in a rcu_read_lock/unlock. Shown here,

 static void sk_psock_strp_data_ready(struct sock *sk)
 {
	struct sk_psock *psock;

	rcu_read_lock();
	psock = sk_psock(sk);
	if (likely(psock)) {
		if (tls_sw_has_ctx_rx(sk)) {
			psock->parser.saved_data_ready(sk);
		} else {
			write_lock_bh(&sk->sk_callback_lock);
			strp_data_ready(&psock->parser.strp);
			write_unlock_bh(&sk->sk_callback_lock);
		}
	}
	rcu_read_unlock();
 }

If the above was the only way to run the verdict program we
would be safe. But, there is a case where the strparser may throw an
ENOMEM error while parsing the skb. This is a result of a failed
skb_clone, or alloc_skb_for_msg while building a new merged skb when
the msg length needed spans multiple skbs. This will in turn put the
skb on the strp_wrk workqueue in the strparser code. The skb will
later be dequeued and verdict programs run, but now from a
different context without the rcu_read_lock()/unlock() critical
section in sk_psock_strp_data_ready() shown above. In practice
I have not seen this yet, because as far as I know most users of the
verdict programs are also only working on single skbs. In this case no
merge happens which could trigger the above ENOMEM errors. In addition
the system would need to be under memory pressure. For example, we
can't hit the above case in selftests because we missed having tests
to merge skbs. (Added in later patch)

To fix the below splat extend the rcu_read_lock/unnlock block to
include the call to sk_psock_tls_verdict_apply(). This will fix both
TLS redirect case and non-TLS redirect+error case. Also remove
psock from the sk_psock_tls_verdict_apply() function signature its
not used there.

[ 1095.937597] WARNING: suspicious RCU usage
[ 1095.940964] 5.7.0-rc7-02911-g463bac5f #1 Tainted: G        W
[ 1095.944363] -----------------------------
[ 1095.947384] include/linux/skmsg.h:284 suspicious rcu_dereference_check() usage!
[ 1095.950866]
[ 1095.950866] other info that might help us debug this:
[ 1095.950866]
[ 1095.957146]
[ 1095.957146] rcu_scheduler_active = 2, debug_locks = 1
[ 1095.961482] 1 lock held by test_sockmap/15970:
[ 1095.964501]  #0: ffff9ea6b25de660 (sk_lock-AF_INET){+.+.}-{0:0}, at: tls_sw_recvmsg+0x13a/0x840 [tls]
[ 1095.968568]
[ 1095.968568] stack backtrace:
[ 1095.975001] CPU: 1 PID: 15970 Comm: test_sockmap Tainted: G        W         5.7.0-rc7-02911-g463bac5f #1
[ 1095.977883] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 1095.980519] Call Trace:
[ 1095.982191]  dump_stack+0x8f/0xd0
[ 1095.984040]  sk_psock_skb_redirect+0xa6/0xf0
[ 1095.986073]  sk_psock_tls_strp_read+0x1d8/0x250
[ 1095.988095]  tls_sw_recvmsg+0x714/0x840 [tls]

v2: Improve commit message to identify non-TLS redirect plus error case
    condition as well as more common TLS case. In the process I decided
    doing the rcu_read_unlock followed by the lock/unlock inside branches
    was unnecessarily complex. We can just extend the current rcu block
    and get the same effeective without the shuffling and branching.
    Thanks Martin!

Fixes: e91de6af ("bpf: Fix running sk_skb program types with ktls")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/159312677907.18340.11064813152758406626.stgit@john-XPS-13-9370

Adjust the SEC("xdp_devmap/") prog type prefix to contain a
slash "/" for expected attach type BPF_XDP_DEVMAP.  This is consistent
with other prog types like tracing.

Fixes: 27787970 ("libbpf: Add SEC name for xdp programs attached to device map")
Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159309521882.821855.6873145686353617509.stgit@firesoul

To ensure btf_ctx_access() is safe the verifier checks that the BTF
arg type is an int, enum, or pointer. When the function does the
BTF arg lookup it uses the calculation 'arg = off / 8'  using the
fact that registers are 8B. This requires that the first arg is
in the first reg, the second in the second, and so on. However,
for __int128 the arg will consume two registers by default LLVM
implementation. So this will cause the arg layout assumed by the
'arg = off / 8' calculation to be incorrect.

Because __int128 is uncommon this patch applies the easiest fix and
will force int types to be sizeof(u64) or smaller so that they will
fit in a single register.

v2: remove unneeded parens per Andrii's feedback

Fixes: 9e15db66 ("bpf: Implement accurate raw_tp context access via BTF")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/159303723962.11287.13309537171132420717.stgit@john-Precision-5820-Tower

When producing the bpf-helpers.7 man page from the documentation from
the BPF user space header file, rst2man complains:

    <stdin>:2636: (ERROR/3) Unexpected indentation.
    <stdin>:2640: (WARNING/2) Block quote ends without a blank line; unexpected unindent.

Let's fix formatting for the relevant chunk (item list in
bpf_ringbuf_query()'s description), and for a couple other functions.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200623153935.6215-1-quentin@isovalent.com

This is a fix for a regression in commit 2c78ee89 ("bpf: Implement CAP_BPF").
Before the above commit it was possible to load network bpf programs
with just the CAP_SYS_ADMIN privilege.

The Android bpfloader happens to run in such a configuration (it has
SYS_ADMIN but not NET_ADMIN) and creates maps and loads bpf programs
for later use by Android's netd (which has NET_ADMIN but not SYS_ADMIN).

Fixes: 2c78ee89 ("bpf: Implement CAP_BPF")
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/bpf/20200620212616.93894-1-zenczykowski@gmail.com

Currently, if a bpf program has more than one subprograms, each program will be
jitted separately. For programs with bpf-to-bpf calls the
prog->aux->num_exentries is not setup properly. For example, with
bpf_iter_netlink.c modified to force one function to be not inlined and with
CONFIG_BPF_JIT_ALWAYS_ON the following error is seen:
   $ ./test_progs -n 3/3
   ...
   libbpf: failed to load program 'iter/netlink'
   libbpf: failed to load object 'bpf_iter_netlink'
   libbpf: failed to load BPF skeleton 'bpf_iter_netlink': -4007
   test_netlink:FAIL:bpf_iter_netlink__open_and_load skeleton open_and_load failed
   #3/3 netlink:FAIL
The dmesg shows the following errors:
   ex gen bug
which is triggered by the following code in arch/x86/net/bpf_jit_comp.c:
   if (excnt >= bpf_prog->aux->num_exentries) {
     pr_err("ex gen bug\n");
     return -EFAULT;
   }

This patch fixes the issue by computing proper num_exentries for each
subprogram before calling JIT.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf_object__find_program_by_title(), used by CO-RE relocation code, doesn't
return .text "BPF program", if it is a function storage for sub-programs.
Because of that, any CO-RE relocation in helper non-inlined functions will
fail. Fix this by searching for .text-corresponding BPF program manually.

Adjust one of bpf_iter selftest to exhibit this pattern.

Fixes: ddc7c304 ("libbpf: implement BPF CO-RE offset relocation algorithm")
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20200619230423.691274-1-andriin@fb.com

Systems that doesn't yet have the very latest linux/bpf.h header, enum
bpf_stats_type will be undefined, causing compilation warnings. Prevents this
by forward-declaring enum.

Fixes: 0bee1067 ("libbpf: Add support for command BPF_ENABLE_STATS")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200621031159.2279101-1-andriin@fb.com

The old address has been bouncing for a while now
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

The user tool modinfo is used to get information on kernel modules, including a
description where it is available.

This patch adds a brief MODULE_DESCRIPTION to the following modules:

9p
drop_monitor
esp4_offload
esp6_offload
fou
fou6
ila
sch_fq
sch_fq_codel
sch_hhf
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When preallocated service calls are being discarded, they're passed to
->discard_new_call() to have the caller clean up any attached higher-layer
preallocated pieces before being marked completed.  However, the act of
marking them completed now invokes the call's notification function - which
causes a problem because that function might assume that the previously
freed pieces of memory are still there.

Fix this by setting a dummy notification function on the socket after
calling ->discard_new_call().

This results in the following kasan message when the kafs module is
removed.

==================================================================
BUG: KASAN: use-after-free in afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
Write of size 1 at addr ffff8880946c39e4 by task kworker/u4:1/21

CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.8.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x18f/0x20d lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 afs_wake_up_async_call+0x6aa/0x770 fs/afs/rxrpc.c:707
 rxrpc_notify_socket+0x1db/0x5d0 net/rxrpc/recvmsg.c:40
 __rxrpc_set_call_completion.part.0+0x172/0x410 net/rxrpc/recvmsg.c:76
 __rxrpc_call_completed net/rxrpc/recvmsg.c:112 [inline]
 rxrpc_call_completed+0xca/0xf0 net/rxrpc/recvmsg.c:111
 rxrpc_discard_prealloc+0x781/0xab0 net/rxrpc/call_accept.c:233
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

Allocated by task 6820:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:467
 kmem_cache_alloc_trace+0x153/0x7d0 mm/slab.c:3551
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 afs_alloc_call+0x55/0x630 fs/afs/rxrpc.c:141
 afs_charge_preallocation+0xe9/0x2d0 fs/afs/rxrpc.c:757
 afs_open_socket+0x292/0x360 fs/afs/rxrpc.c:92
 afs_net_init+0xa6c/0xe30 fs/afs/main.c:125
 ops_init+0xaf/0x420 net/core/net_namespace.c:151
 setup_net+0x2de/0x860 net/core/net_namespace.c:341
 copy_net_ns+0x293/0x590 net/core/net_namespace.c:482
 create_new_namespaces+0x3fb/0xb30 kernel/nsproxy.c:110
 unshare_nsproxy_namespaces+0xbd/0x1f0 kernel/nsproxy.c:231
 ksys_unshare+0x43d/0x8e0 kernel/fork.c:2983
 __do_sys_unshare kernel/fork.c:3051 [inline]
 __se_sys_unshare kernel/fork.c:3049 [inline]
 __x64_sys_unshare+0x2d/0x40 kernel/fork.c:3049
 do_syscall_64+0x60/0xe0 arch/x86/entry/common.c:359
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 21:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:455
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x109/0x2b0 mm/slab.c:3757
 afs_put_call+0x585/0xa40 fs/afs/rxrpc.c:190
 rxrpc_discard_prealloc+0x764/0xab0 net/rxrpc/call_accept.c:230
 rxrpc_listen+0x147/0x360 net/rxrpc/af_rxrpc.c:245
 afs_close_socket+0x95/0x320 fs/afs/rxrpc.c:110
 afs_net_exit+0x1bc/0x310 fs/afs/main.c:155
 ops_exit_list.isra.0+0xa8/0x150 net/core/net_namespace.c:186
 cleanup_net+0x511/0xa50 net/core/net_namespace.c:603
 process_one_work+0x965/0x1690 kernel/workqueue.c:2269
 worker_thread+0x96/0xe10 kernel/workqueue.c:2415
 kthread+0x3b5/0x4a0 kernel/kthread.c:291
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff8880946c3800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 484 bytes inside of
 1024-byte region [ffff8880946c3800, ffff8880946c3c00)
The buggy address belongs to the page:
page:ffffea000251b0c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002546508 ffffea00024fa248 ffff8880aa000c40
raw: 0000000000000000 ffff8880946c3000 0000000100000002 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880946c3880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880946c3980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff8880946c3a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880946c3a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Reported-by: syzbot+d3eccef36ddbd02713e9@syzkaller.appspotmail.com
Fixes: 5ac0d622 ("rxrpc: Fix missing notification")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'ieee802154-for-davem-2020-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2020-06-19

An update from ieee802154 for your *net* tree.

Just two small maintenance fixes to update references to the new project
homepage.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since iproute2 commit f72c3ad00f3b ("tc: m_tunnel_key: add options
support for vxlan"), the geneve opt output use key word "geneve_opts"
instead of "geneve_opt". To make compatibility for both old and new
iproute2, let's accept both "geneve_opt" and "geneve_opts".
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Typically the firmware takes care that tp->ocp_base is reset to its
default value. That's not the case (at least) for RTL8117.
As a result subsequent PHY access reads/writes the wrong page and
the link is broken. Fix this be resetting tp->ocp_base explicitly.

Fixes: 229c1e0d ("r8169: load firmware for RTL8168fp/RTL8117")
Reported-by: Aaron Ma <mapengyu@gmail.com>
Tested-by: Aaron Ma <mapengyu@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Continue the reset path when partner adapter is not ready or H_CLOSED is
returned from reset crq. This patch allows the CRQ init to proceed to
establish a valid CRQ for traffic to flow after reset.
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Even with moving netif_tx_disable() to an earlier point when
taking down the queues for a reconfiguration, we still end
up with the occasional netdev watchdog Tx Timeout complaint.
The old method of using netif_trans_update() works fine for
queue 0, but has no effect on the remaining queues.  Using
netif_device_detach() allows us to signal to the watchdog to
ignore us for the moment.

Fixes: beead698 ("ionic: Add the basic NDO callbacks for netdev support")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ETF qdisc can queue skbs that it could not pace on the errqueue.

Address a few issues in the selftest

- recv buffer size was too small, and incorrectly calculated
- compared errno to ee_code instead of ee_errno
- missed invalid request error type

v2:
  - fix a few checkpatch --strict indentation warnings

Fixes: ea6a5476 ("selftests/net: make so_txtime more robust to timer variance")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The max MTU limit defined for ibmveth is not accounting for
virtual ethernet buffer overhead, which is twenty-two additional
bytes set aside for the ethernet header and eight additional bytes
of an opaque handle reserved for use by the hypervisor. Update the
max MTU to reflect this overhead.

Fixes: d894be57 ("ethernet: use net core MTU range checking in more drivers")
Fixes: 110447f8 ("ethernet: fix min/max MTU typos")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wenxu says:

====================
several fixes for indirect flow_blocks offload

v2:
patch2: store the cb_priv of representor to the flow_block_cb->indr.cb_priv
in the driver. And make the correct check with the statments
this->indr.cb_priv == cb_priv

patch4: del the driver list only in the indriect cleanup callbacks

v3:
add the cover letter and changlogs.

v4:
collapsed 1/4, 2/4, 4/4 in v3 to one fix
Add the prepare patch 1 and 2

v5:
patch1: place flow_indr_block_cb_alloc() right before
flow_indr_dev_setup_offload() to avoid moving flow_block_indr_init()

This series fixes commit 1fac52da ("net: flow_offload: consolidate
indirect flow_block infrastructure") that revists the flow_block
infrastructure.

patch #1 #2: prepare for fix patch #3
add and use flow_indr_block_cb_alloc/remove function

patch #3: fix flow_indr_dev_unregister path
If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path

patch#4 fix block->nooffloaddevcnt warning dmesg log.
When a indr device add in offload success. The block->nooffloaddevcnt
should be 0. After the representor go away. When the dir device go away
the flow_block UNBIND operation with -EOPNOTSUPP which lead the warning
demesg log.
The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.
====================
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The block->nooffloaddevcnt should always count for indr block.
even the indr block offload successful. The representor maybe
gone away and the ingress qdisc can work in software mode.

block->nooffloaddevcnt warning with following dmesg log:

[  760.667058] #####################################################
[  760.668186] ## TEST test-ecmp-add-vxlan-encap-disable-sriov.sh ##
[  760.669179] #####################################################
[  761.780655] :test: Fedora 30 (Thirty)
[  761.783794] :test: Linux reg-r-vrt-018-180 5.7.0+
[  761.822890] :test: NIC ens1f0 FW 16.26.6000 PCI 0000:81:00.0 DEVICE 0x1019 ConnectX-5 Ex
[  761.860244] mlx5_core 0000:81:00.0 ens1f0: Link up
[  761.880693] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
[  762.059732] mlx5_core 0000:81:00.1 ens1f1: Link up
[  762.234341] :test: unbind vfs of ens1f0
[  762.257825] :test: Change ens1f0 eswitch (0000:81:00.0) mode to switchdev
[  762.291363] :test: unbind vfs of ens1f1
[  762.306914] :test: Change ens1f1 eswitch (0000:81:00.1) mode to switchdev
[  762.309237] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(LEGACY), nvfs(2), active vports(3)
[  763.282598] mlx5_core 0000:81:00.1: E-Switch: Supported tc offload range - chains: 4294967294, prios: 4294967295
[  763.362825] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  763.444465] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
[  763.460088] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  763.502586] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  763.552429] ens1f1_0: renamed from eth0
[  763.569569] mlx5_core 0000:81:00.1: E-Switch: Enable: mode(OFFLOADS), nvfs(2), active vports(3)
[  763.629694] ens1f1_1: renamed from eth1
[  764.631552] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_0: link becomes ready
[  764.670841] :test: unbind vfs of ens1f0
[  764.681966] :test: unbind vfs of ens1f1
[  764.726762] mlx5_core 0000:81:00.0 ens1f0: Link up
[  764.766511] mlx5_core 0000:81:00.1 ens1f1: Link up
[  764.797325] :test: Add multipath vxlan encap rule and disable sriov
[  764.798544] :test: config multipath route
[  764.812732] mlx5_core 0000:81:00.0: lag map port 1:2 port 2:2
[  764.874556] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:2
[  765.603681] :test: OK
[  765.659048] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1_1: link becomes ready
[  765.675085] :test: verify rule in hw
[  765.694237] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready
[  765.711892] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f1: link becomes ready
[  766.979230] :test: OK
[  768.125419] :test: OK
[  768.127519] :test: - disable sriov ens1f1
[  768.131160] pci 0000:81:02.2: Removing from iommu group 75
[  768.132646] pci 0000:81:02.3: Removing from iommu group 76
[  769.179749] mlx5_core 0000:81:00.1: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
[  769.455627] mlx5_core 0000:81:00.0: modify lag map port 1:1 port 2:1
[  769.703990] mlx5_core 0000:81:00.1: MLX5E: StrdRq(1) RqSz(8) StrdSz(2048) RxCqeCmprss(0)
[  769.988637] mlx5_core 0000:81:00.1 ens1f1: renamed from eth0
[  769.990022] :test: - disable sriov ens1f0
[  769.994922] pci 0000:81:00.2: Removing from iommu group 73
[  769.997048] pci 0000:81:00.3: Removing from iommu group 74
[  771.035813] mlx5_core 0000:81:00.0: E-Switch: Disable: mode(OFFLOADS), nvfs(2), active vports(3)
[  771.339091] ------------[ cut here ]------------
[  771.340812] WARNING: CPU: 6 PID: 3448 at net/sched/cls_api.c:749 tcf_block_offload_unbind.isra.0+0x5c/0x60
[  771.341728] Modules linked in: act_mirred act_tunnel_key cls_flower dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache tun bridge stp llc sunrpc rdma_ucm rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp mlxfw act_ct nf_flow_table kvm_intel nf_nat kvm nf_conntrack irqbypass crct10dif_pclmul igb crc32_pclmul nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 crc32c_intel ghash_clmulni_intel ptp ipmi_ssif intel_cstate pps_c
ore ses intel_uncore mei_me iTCO_wdt joydev ipmi_si iTCO_vendor_support i2c_i801 enclosure mei ioatdma dca lpc_ich wmi ipmi_devintf pcspkr acpi_power_meter ipmi_msghandler acpi_pad ast i2c_algo_bit drm_vram_helper drm_kms_helper drm_ttm_helper ttm drm mpt3sas raid_class scsi_transport_sas
[  771.347818] CPU: 6 PID: 3448 Comm: test-ecmp-add-v Not tainted 5.7.0+ #1146
[  771.348727] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
[  771.349646] RIP: 0010:tcf_block_offload_unbind.isra.0+0x5c/0x60
[  771.350553] Code: 4a fd ff ff 83 f8 a1 74 0e 5b 4c 89 e7 5d 41 5c 41 5d e9 07 93 89 ff 8b 83 a0 00 00 00 8d 50 ff 89 93 a0 00 00 00 85 c0 75 df <0f> 0b eb db 0f 1f 44 00 00 41 57 41 56 41 55 41 89 cd 41 54 49 89
[  771.352420] RSP: 0018:ffffb33144cd3b00 EFLAGS: 00010246
[  771.353353] RAX: 0000000000000000 RBX: ffff8b37cf4b2800 RCX: 0000000000000000
[  771.354294] RDX: 00000000ffffffff RSI: ffff8b3b9aad0000 RDI: ffffffff8d5c6e20
[  771.355245] RBP: ffff8b37eb546948 R08: ffffffffc0b7a348 R09: ffff8b3b9aad0000
[  771.356189] R10: 0000000000000001 R11: ffff8b3ba7a0a1c0 R12: ffff8b37cf4b2850
[  771.357123] R13: ffff8b3b9aad0000 R14: ffff8b37cf4b2820 R15: ffff8b37cf4b2820
[  771.358039] FS:  00007f8a19b6e740(0000) GS:ffff8b3befa00000(0000) knlGS:0000000000000000
[  771.358965] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  771.359885] CR2: 00007f3afb91c1a0 CR3: 000000045133c004 CR4: 00000000001606e0
[  771.360825] Call Trace:
[  771.361764]  __tcf_block_put+0x84/0x150
[  771.362712]  ingress_destroy+0x1b/0x20 [sch_ingress]
[  771.363658]  qdisc_destroy+0x3e/0xc0
[  771.364594]  dev_shutdown+0x7a/0xa5
[  771.365522]  rollback_registered_many+0x20d/0x530
[  771.366458]  ? netdev_upper_dev_unlink+0x15d/0x1c0
[  771.367387]  unregister_netdevice_many.part.0+0xf/0x70
[  771.368310]  vxlan_netdevice_event+0xa4/0x110 [vxlan]
[  771.369454]  notifier_call_chain+0x4c/0x70
[  771.370579]  rollback_registered_many+0x2f5/0x530
[  771.371719]  rollback_registered+0x56/0x90
[  771.372843]  unregister_netdevice_queue+0x73/0xb0
[  771.373982]  unregister_netdev+0x18/0x20
[  771.375168]  mlx5e_vport_rep_unload+0x56/0xc0 [mlx5_core]
[  771.376327]  esw_offloads_disable+0x81/0x90 [mlx5_core]
[  771.377512]  mlx5_eswitch_disable_locked.cold+0xcb/0x1af [mlx5_core]
[  771.378679]  mlx5_eswitch_disable+0x44/0x60 [mlx5_core]
[  771.379822]  mlx5_device_disable_sriov+0xad/0xb0 [mlx5_core]
[  771.380968]  mlx5_core_sriov_configure+0xc1/0xe0 [mlx5_core]
[  771.382087]  sriov_numvfs_store+0xfc/0x130
[  771.383195]  kernfs_fop_write+0xce/0x1b0
[  771.384302]  vfs_write+0xb6/0x1a0
[  771.385410]  ksys_write+0x5f/0xe0
[  771.386500]  do_syscall_64+0x5b/0x1d0
[  771.387569]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 0fdcf78d ("net: use flow_indr_dev_setup_offload()")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the representor is removed, then identify the indirect flow_blocks
that need to be removed by the release callback and the port representor
structure. To identify the port representor structure, a new
indr.cb_priv field needs to be introduced. The flow_block also needs to
be removed from the driver list from the cleanup path.

Fixes: 1fac52da ("net: flow_offload: consolidate indirect flow_block infrastructure")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prepare fix the bug in the next patch. use flow_indr_block_cb_alloc/remove
function and remove the __flow_block_indr_binding.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add flow_indr_block_cb_alloc/remove function for next fix patch.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, trying to change the DF parameter of a geneve device does
nothing:

    # ip -d link show geneve1
    14: geneve1: <snip>
        link/ether <snip>
        geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip>
    # ip link set geneve1 type geneve id 1 df unset
    # ip -d link show geneve1
    14: geneve1: <snip>
        link/ether <snip>
        geneve id 1 remote 10.0.0.1 ttl auto df set dstport 6081 <snip>

We just need to update the value in geneve_changelink.

Fixes: a025fb5f ("geneve: Allow configuration of DF behaviour")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

VLAN tag insertion/extraction offload is correctly
activated at probe time but deactivation of this feature
(i.e. via ethtool) is broken.  Toggling works only for
Tx/Rx ring 0 of a PF, and is ignored for the other rings,
including the VF rings.
To fix this, the existing VLAN offload toggling code
was extended to all the rings assigned to a netdevice,
instead of the default ring 0 (likely a leftover from the
early validation days of this feature).  And the code was
moved to the common set_features() function to fix toggling
for the VF driver too.

Fixes: d4fd0404 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Undo previously done operation in case macb_phylink_connect()
fails. Since macb_reset_hw() is the 1st undo operation the
napi_exit label was renamed to reset_hw.

Fixes: 7897b071 ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Performance drop fix and other fixes

Here are three fixes for rxrpc:

 (1) Fix a trace symbol mapping.  It doesn't seem to let you map to "".

 (2) Fix the handling of the remote receive window size when it increases
     beyond the size we can support for our transmit window.

 (3) Fix a performance drop caused by retransmitted packets being
     accidentally marked as already ACK'd.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: phy: MDIO bus scanning fixes

This patch series fixes two problems with the current MDIO bus scanning
logic which was identified while moving from 4.9 to 5.4 on devices that
do rely on scanning the MDIO bus at runtime because they use pluggable
cards.

Changes in v2:

- added comment explaining the special value of -ENODEV
- added Andrew's Reviewed-by tag
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 02a6efca ("net: phy: allow scanning busses with missing
phys") added a special condition to return -ENODEV in case -ENODEV or
-EIO was returned from the first read of the MII_PHYSID1 register.

In case the MDIO bus data line pull-up is not strong enough, the MDIO
bus controller will not flag this as a read error. This can happen when
a pluggable daughter card is not connected and weak internal pull-ups
are used (since that is the only option, otherwise the pins are
floating).

The second read of MII_PHYSID2 will be correctly flagged an error
though, but now we will return -EIO which will be treated as a hard
error, thus preventing MDIO bus scanning loops to continue succesfully.

Apply the same logic to both register reads, thus allowing the scanning
logic to proceed.

Fixes: 02a6efca ("net: phy: allow scanning busses with missing phys")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 209c65b6 ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
introduced a break of the loop on the premise that a successful
registration should exit the loop. The premise is correct but not to
code, because rc && rc != -ENODEV is just a special error condition,
that means we would exit the loop even with rc == -ENODEV which is
absolutely not correct since this is the error code to indicate to the
MDIO bus layer that scanning should continue.

Fix this by explicitly checking for rc = 0 as the only valid condition
to break out of the loop.

Fixes: 209c65b6 ("drivers/of/of_mdio.c:fix of_mdiobus_register()")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix typo: "Triger" --> "Trigger"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update URL to our new home.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

We finally came around to setup a new project website.
Update the reference here.
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>

Fix typo: "trigered" --> "triggered"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>