Skip to content

L
linux
Switch branch/tag
  1. 13 Oct, 2010 9 commits
  3. 12 Oct, 2010 13 commits
    • Russell King's avatar
      ARM: relax ioremap prohibition (309caa9c) for -final and -stable · 06c10884
      Russell King authored 
      ... but produce a big warning about the problem as encouragement
for people to fix their drivers.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      06c10884
    • Russell King's avatar
      Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 · 841f48a8
      Russell King authored
      841f48a8
    • Mika Westerberg's avatar
      ARM: 6440/1: ep93xx: DMA: fix channel_disable · 10d48b39
      Mika Westerberg authored 
      When channel_disable() is called, it disables per channel interrupts and
waits until channels state becomes STATE_STALL, and then disables the
channel. Now, if the DMA transfer is disabled while the channel is in
STATE_NEXT we will not wait anything and disable the channel immediately.
This seems to cause weird data corruption for example in audio transfers.

Fix is to wait while we are in STATE_NEXT or STATE_ON and only then
disable the channel.
Signed-off-by: default avatarMika Westerberg <mika.westerberg@iki.fi>
Acked-by: default avatarRyan Mallon <ryan@bluewatersys.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      10d48b39
    • Linus Torvalds's avatar
      Merge branch 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 0acc1b2a
      Linus Torvalds authored 
      * 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Move TSC reset out of vmcb_init
  KVM: x86: Fix SVM VMCB reset
      0acc1b2a
    • Steven Rostedt's avatar
      ring-buffer: Fix typo of time extends per page · d0134324
      Steven Rostedt authored 
      Time stamps for the ring buffer are created by the difference between
two events. Each page of the ring buffer holds a full 64 bit timestamp.
Each event has a 27 bit delta stamp from the last event. The unit of time
is nanoseconds, so 27 bits can hold ~134 milliseconds. If two events
happen more than 134 milliseconds apart, a time extend is inserted
to add more bits for the delta. The time extend has 59 bits, which
is good for ~18 years.

Currently the time extend is committed separately from the event.
If an event is discarded before it is committed, due to filtering,
the time extend still exists. If all events are being filtered, then
after ~134 milliseconds a new time extend will be added to the buffer.

This can only happen till the end of the page. Since each page holds
a full timestamp, there is no reason to add a time extend to the
beginning of a page. Time extends can only fill a page that has actual
data at the beginning, so there is no fear that time extends will fill
more than a page without any data.

When reading an event, a loop is made to skip over time extends
since they are only used to maintain the time stamp and are never
given to the caller. As a paranoid check to prevent the loop running
forever, with the knowledge that time extends may only fill a page,
a check is made that tests the iteration of the loop, and if the
iteration is more than the number of time extends that can fit in a page
a warning is printed and the ring buffer is disabled (all of ftrace
is also disabled with it).

There is another event type that is called a TIMESTAMP which can
hold 64 bits of data in the theoretical case that two events happen
18 years apart. This code has not been implemented, but the name
of this event exists, as well as the structure for it. The
size of a TIMESTAMP is 16 bytes, where as a time extend is only
8 bytes. The macro used to calculate how many time extends can fit on
a page used the TIMESTAMP size instead of the time extend size
cutting the amount in half.

The following test case can easily trigger the warning since we only
need to have half the page filled with time extends to trigger the
warning:

 # cd /sys/kernel/debug/tracing/
 # echo function > current_tracer
 # echo 'common_pid < 0' > events/ftrace/function/filter
 # echo > trace
 # echo 1 > trace_marker
 # sleep 120
 # cat trace

Enabling the function tracer and then setting the filter to only trace
functions where the process id is negative (no events), then clearing
the trace buffer to ensure that we have nothing in the buffer,
then write to trace_marker to add an event to the beginning of a page,
sleep for 2 minutes (only 35 seconds is probably needed, but this
guarantees the bug), and then finally reading the trace which will
trigger the bug.

This patch fixes the typo and prevents the false positive of that warning.
Reported-by: default avatarHans J. Koch <hjk@linutronix.de>
Tested-by: default avatarHans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      d0134324
    • Deng-Cheng Zhu's avatar
      perf, MIPS: Support cross compiling of tools/perf for MIPS · c1e028ef
      Deng-Cheng Zhu authored 
      Changes:
 v4: Fix the cosmetic issue of redundant dot-ops
 v3: Change rmb() to use SYNC
 v2: Include mips unistd.h and define rmb()/cpu_relax() in tools/perf/perf.h
Signed-off-by: default avatarDeng-Cheng Zhu <dengcheng.zhu@gmail.com>
Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      c1e028ef
    • Jean Delvare's avatar
      drm/radeon/kms: Silent spurious error message · a8c051f0
      Jean Delvare authored 
      I see the following error message in my kernel log from time to time:
radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait
radeon 0000:07:00.0: ffff88007c334000 reserve failed for wait

After investigation, it turns out that there's nothing to be afraid of
and everything works as intended. So remove the spurious log message.
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Reviewed-by: default avatarJerome Glisse <jglisse@redhat.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      a8c051f0
    • Alex Deucher's avatar
      drm/radeon/kms: fix bad cast/shift in evergreen.c · d31dba58
      Alex Deucher authored 
      Missing parens.

fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30718Reported-by: default avatarDave Gilbert <freedesktop@treblig.org>
Signed-off-by: default avatarAlex Deucher <alexdeucher@gmail.com>
Reviewed-by: default avatarMatt Turner <mattst88@gmail.com>
Cc: stable@kernel.org
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      d31dba58
    • Alex Deucher's avatar
      drm/radeon/kms: make TV/DFP table info less verbose · 40f76d81
      Alex Deucher authored 
      Make TV standard and DFP table revisions debug only.
Signed-off-by: default avatarAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      40f76d81
    • Alex Deucher's avatar
      drm/radeon/kms: leave certain CP int bits enabled · 3555e53b
      Alex Deucher authored 
      These bits are used for internal communication and should
be left enabled.  This may fix s/r issues on some systems.
Signed-off-by: default avatarAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      3555e53b
    • Jerome Glisse's avatar
      drm/radeon/kms: avoid corner case issue with unmappable vram V2 · c919b371
      Jerome Glisse authored 
      We should not allocate any object into unmappable vram if we
have no means to access them which on all GPU means having the
CP running and on newer GPU having the blit utility working.

This patch limit the vram allocation to visible vram until
we have acceleration up and running.

Note that it's more than unlikely that we run into any issue
related to that as when acceleration is not woring userspace
should allocate any object in vram beside front buffer which
should fit in visible vram.

V2 use real_vram_size as mc_vram_size could be bigger than
   the actual amount of vram

[airlied: fixup r700_cp_stop case]
Signed-off-by: default avatarJerome Glisse <jglisse@redhat.com>
Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
      c919b371
    • John Blackwood's avatar
      perf: Fix incorrect copy_from_user() usage · ad0cf347
      John Blackwood authored 
      perf events: repair incorrect use of copy_from_user

This makes the perf_event_period() return 0 instead of
-EFAULT on success.

Signed-off-by: John Blackwood<john.blackwood@ccur.com>
Signed-off-by: default avatarJoe Korty <joe.korty@ccur.com>
Acked-by: default avatarPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100928220311.GA18145@tsunami.ccur.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      ad0cf347
    • Eric Paris's avatar
      fanotify: disable fanotify syscalls · 7c534773
      Eric Paris authored 
      This patch disables the fanotify syscalls by just not building them and
letting the cond_syscall() statements in kernel/sys_ni.c redirect them
to sys_ni_syscall().

It was pointed out by Tvrtko Ursulin that the fanotify interface did not
include an explicit prioritization between groups.  This is necessary
for fanotify to be usable for hierarchical storage management software,
as they must get first access to the file, before inotify-like notifiers
see the file.

This feature can be added in an ABI compatible way in the next release
(by using a number of bits in the flags field to carry the info) but it
was suggested by Alan that maybe we should just hold off and do it in
the next cycle, likely with an (new) explicit argument to the syscall.
I don't like this approach best as I know people are already starting to
use the current interface, but Alan is all wise and noone on list backed
me up with just using what we have.  I feel this is needlessly ripping
the rug out from under people at the last minute, but if others think it
needs to be a new argument it might be the best way forward.

Three choices:
Go with what we got (and implement the new feature next cycle).  Add a
new field right now (and implement the new feature next cycle).  Wait
till next cycle to release the ABI (and implement the new feature next
cycle).  This is number 3.
Signed-off-by: default avatarEric Paris <eparis@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7c534773
  5. 11 Oct, 2010 11 commits
  7. 10 Oct, 2010 1 commit
  9. 09 Oct, 2010 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7