- 01 Dec, 2019 2 commits
-
-
Luigi Rizzo authored
[ Upstream commit 34e59836 ] ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the total number of entries in the rx classifier table. Surprisingly, mlx4 is missing this part (in principle ethtool could still move forward and try the insert). Tested: compiled and run command: phh13:~# ethtool -N eth1 flow-type udp4 queue 4 Added rule with ID 255 Signed-off-by:
Luigi Rizzo <lrizzo@google.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Petr Machata authored
[ Upstream commit 1fc16577 ] The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a GRE tunnel. For a tunnel without a bound device, it uses the same VRF that the tunnel is in. However in Linux, a GRE tunnel without a bound device uses the main VRF as the underlay. Fix the function accordingly. mlxsw further assumed that moving a tunnel to a different VRF could cause conflict in local tunnel endpoint address, which cannot be offloaded. However, the only way that an underlay could be changed by moving the tunnel device itself is if the tunnel device does not have a bound device. But in that case the underlay is always the main VRF, so there is no opportunity to introduce a conflict by moving such device. Thus this check constitutes a dead code, and can be removed, which do. Fixes: 6ddb7426 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by:
Petr Machata <petrm@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 24 Nov, 2019 38 commits
-
-
Greg Kroah-Hartman authored
-
Reinette Chatre authored
[ Upstream commit 52eb7433 ] rdt_find_domain() returns an ERR_PTR() that is generated from a provided domain id when the value is negative. Care needs to be taken when creating an ERR_PTR() from this value because a subsequent check using IS_ERR() expects the error to be within the MAX_ERRNO range. Using an invalid domain id as an ERR_PTR() does work at this time since this is currently always -1. Using this undocumented assumption is fragile since future users of rdt_find_domain() may not be aware of thus assumption. Two related issues are addressed: - Ensure that rdt_find_domain() always returns a valid error value by forcing the error to be -ENODEV when a negative domain id is provided. - In a few instances the return value of rdt_find_domain() is just checked for NULL - fix these to include a check of ERR_PTR. Fixes: d89b7379 ("x86/intel_rdt/cqm: Add mon_data") Fixes: 521348b0 ("x86/intel_rdt: Introduce utility to obtain CDP peer") Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: fenghua.yu@intel.com Cc: gavin.hindman@intel.com Cc: jithu.joseph@intel.com Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/b88cd4ff6a75995bf8db9b0ea546908fe50f69f3.1544479852.git.reinette.chatre@intel.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Takeshi Saito authored
[ Upstream commit 51b72656 ] If an SCC error occurs during a read/write command execution, a false positive CRC error message is output. mmcblk0: response CRC error sending r/w cmd command, card status 0x900 check_scc_error() checks SCC_RVSREQ.RVSERR bit. RVSERR detects a correction error in the next (up or down) delay tap position. However, since the command is successful, only retuning needs to be executed. This has been confirmed by HW engineers. Thus, on SCC error, set retuning flag instead of setting an error code. Fixes: b85fb0a1 ("mmc: tmio: Fix SCC error detection") Signed-off-by:
Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: updated comment and commit message, removed some braces] Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit b4d16ab5 ] In the recent commit 8b78fdb0 ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer") we changed the way we initialise the decrementer clockevent(s). We no longer initialise the mult & shift values of decrementer_clockevent itself. This has the effect of breaking PR KVM, because it uses those values in kvmppc_emulate_dec(). The symptom is guest kernels spin forever mid-way through boot. For now fix it by assigning back to decrementer_clockevent the mult and shift values. Fixes: 8b78fdb0 ("powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Alan Mikhak authored
[ Upstream commit 8a5e0af2 ] pcitest is currently broken due to the following compiler error and related warning. Fix by changing the run_test() function signature to return an integer result. pcitest.c: In function run_test: pcitest.c:143:9: warning: return with a value, in function returning void return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */ pcitest.c: In function main: pcitest.c:232:9: error: void value not ignored as it ought to be return run_test(test); Fixes: fef31eca ("tools: PCI: Fix compilation warnings") Signed-off-by:
Alan Mikhak <alan.mikhak@sifive.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by:
Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit b53b0128 ] The patch 23c7b54c: "PM / devfreq: Fix devfreq_add_device() when drivers are built as modules." leads to the following static checker warning: drivers/devfreq/devfreq.c:1043 governor_store() warn: 'governor' can also be NULL The reason is that the try_then_request_governor() function returns both error pointers and NULL. It should just return error pointers, so fix this by returning a ERR_PTR to the error intead of returning NULL. Fixes: 23c7b54c ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit c8afd034 ] Commit 48402cee ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq") makes acpi_lpss_{suspend_late,resume_early}() bail early on BYT/CHT as resume_from_noirq is set. This means that on resume from hibernate dw_i2c_plat_resume() doesn't get called by the restore_early callback, acpi_lpss_resume_early(). Instead it should be called by the restore_noirq callback matching how things are done when resume_from_noirq is set and we are doing a regular resume. Change the restore_noirq callback to acpi_lpss_resume_noirq so that dw_i2c_plat_resume() gets properly called when resume_from_noirq is set and we are resuming from hibernate. Likewise also change the poweroff_noirq callback so that dw_i2c_plat_suspend gets called properly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202139 Fixes: 48402cee ("ACPI / LPSS: Resume BYT/CHT I2C controllers from resume_noirq") Reported-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Yuchung Cheng authored
[ Upstream commit 041a14d2 ] Previously receiver buffer auto-tuning starts after receiving one advertised window amount of data. After the initial receiver buffer was raised by patch a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB"), the reciver buffer may take too long to start raising. To address this issue, this patch lowers the initial bytes expected to receive roughly the expected sender's initial window. Fixes: a337531b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit a763ecc1 ] OMAP5's Super-Speed USB port has a software mailbox register that needs to be fed with VBUS and ID events from an external VBUS/ID comparator. Without this, Host role will not work correctly. Fixes: 656c1a65 ("ARM: dts: omap5: enable OTG role for DWC3 controller") Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit 5050f6ae ] VxLAN FDB updates are sent with the VxLAN device which is not our upper and will therefore be ignored by current code. Solve this by checking whether the upper device (bridge) is our upper. Signed-off-by:
-
Huibin Hong authored
[ Upstream commit dd8fd2cb ] The rxconf and txconf structs are allocated on the stack, so make sure we zero them before filling out the relevant fields. Signed-off-by:
Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 972b66b8 ] Long/short preamble selection cannot be sampled separately, since it depends on the BSS state. Because of that, sampling attempts to currently not used preamble modes are not counted in the statistics, which leads to CCK rates being sampled too often. Fix statistics accounting for long/short preamble by increasing the index where necessary. Fix excessive CCK rate sampling by dropping unsupported sample attempts. This improves throughput on 2.4 GHz channels Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 80df9be6 ] Fixes a harmless underflow issue when CCK rates are actively being used Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit 37439f2d ] mi->supported[MINSTREL_CCK_GROUP] needs to be updated short preamble rates need to be marked as supported regardless of whether it's currently enabled. Its state can change at any time without a rate_update call. Fixes: 782dda00 ("mac80211: minstrel_ht: move short preamble check out of get_rate") Signed-off-by:
-
zhong jiang authored
[ Upstream commit 3dac3583 ] It is not safe to dereference an object before a null test. It is not needed and just remove them. Ftrace can be used instead. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit d701d811 ] Zero pad private area, otherwise we expose private kernel pointer to userspace. This patch also zeroes the tail area after the ->matchsize and ->targetsize that results from XT_ALIGN(). Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables") Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit f98ebd47 ] While noop_qdisc.gso_skb and noop_qdisc.skb_bad_txq are not used in other places, it seems not correct to overwrite their fields in dev_init_scheduler_queue(). noop_qdisc is essentially a shared and read-only object, even if it is not marked as const because of some implementation detail. Signed-off-by:
-
Petr Machata authored
[ Upstream commit 37280905 ] Immediately after mlxsw module is probed and lldpad started, added APP entries are briefly in "unknown" state before becoming "pending". That's the state that lldpad_app_wait_set() typically sees, and since there are no pending entries at that time, it bails out. However the entries have not been pushed to the kernel yet at that point, and thus the test case fails. Fix by waiting for both unknown and pending entries to disappear before proceeding. Fixes: d159261f ("selftests: mlxsw: Add test for trust-DSCP") Signed-off-by:
-
Kun Yi authored
[ Upstream commit f21c8e75 ] Change initial PWM target to 255 to prevent overheating, for example when BMC hangs in userspace or when userspace fan control application is not implemented yet. Signed-off-by:
Kun Yi <kunyi@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Nicolin Chen authored
[ Upstream commit 791ebc9d ] The three INA3221_CONFIG_MODE macros are not correctly defined here. The MODE3-1 bits are located at BIT 2-0 according to the datasheet. So this patch just fixes them by shifting all of them with a correct offset. However, this isn't a crital bug fix as the driver does not use any of them at this point. Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 9f67f758 ] Probe deferrals aren't actual errors, so silence the error message in case the PWM cannot yet be acquired. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 3be8c9d1 ] For NCT6795D and NCT6796D, the DIMM temperature sources are named "Agent[01] Dimm [01]" per datasheet. Match names in datasheets to avoid confusion. Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 53dfa008 ] BIOS developer guides refer to Family 15h Models 60h-6fh and Family 15h Models 70h-7fh. So far the driver only checked for Models 60h and 70h. However, there are now processors with other model numbers in the same families. Example is A10-9620P family 15h model 65h. Follow the developer guides and mask the lower 4 bit of the model number to determine the registers to use for reading temperatures and temperature limits. Reported-by:
Guglielmo Fanini <g.fanini@gmail.com> Cc: Guglielmo Fanini <g.fanini@gmail.com> Acked-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit ca2ade24 ] There are extraneous parantheses that are causing clang to produce a warning so remove these. Clean up 3 clang warnings: equality comparison with extraneous parentheses [-Wparentheses-equality] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Ching Huang <ching2048@areca.com.tw> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit a85c928f ] The previous fix made the TVC clock get muxed in on the D-Link DIR-685 instead of giving nagging warnings of this not working. Not good. We didn't want that, as it breaks video. Create a specific group for the TVC CLK, and break out a specific GPIO group for it on the SL3516 so we can use that line as GPIO if we don't need the TVC CLK. Fixes: d17f477c ("pinctrl: gemini: Mask and set properly") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 2978d873 ] Currently accessing various /sys/fs/orangefs files will spam the kernel log with the following info message when the client is not running: [ 491.489284] sysfs_service_op_show: Client not running :-5: Rate limit this info message to make it less spammy. Signed-off-by:
Mike Marshall <hubcap@omnibond.com> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit c200dac7 ] PCI BIOS requires the BIOS area 0x0A0000-0x0FFFFFF to be mapped W+X for various legacy reasons. When CONFIG_DEBUG_WX is enabled, this triggers the WX warning, but this is misleading because the mapping is required and is not a result of an accidental oversight. Prevent the full warning when PCI BIOS is enabled and the detected WX mapping is in the BIOS area. Just emit a pr_warn() which denotes the fact. This is partially duplicating the info which the PCI BIOS code emits when it maps the area as executable, but that info is not in the context of the WX checking output. Remove the extra %p printout in the WARN_ONCE() while at it. %pS is enough. Reported-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Timothy E Baldwin authored
[ Upstream commit f18aef74 ] On at least x86 and ARM64, and as documented in the ptrace man page a skipped system call will still cause a syscall exit ptrace stop. Previous to this commit 32-bit ARM did not, resulting in strace being confused when seccomp skips system calls. This change also impacts programs that use ptrace to skip system calls. Fixes: ad75b514 ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL") Signed-off-by:
Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Signed-off-by:
Eugene Syromyatnikov <evgsyr@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Tested-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Trent Piepho authored
[ Upstream commit 605b3bec ] spidev will make a big fuss if a device tree node binds a device by using "spidev" as the node's compatible property. However, the logic for this isn't looking for "spidev" in the compatible, but rather checking that the device is NOT compatible with spidev's list of devices. This causes a false positive if a device not named "rohm,dh2228fv", etc. binds to spidev, even if a means other than putting "spidev" in the device tree was used. E.g., the sysfs driver_override attribute. Signed-off-by:
Trent Piepho <tpiepho@impinj.com> Reviewed-by:
Jan Kundrát <jan.kundrat@cesnet.cz> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit d17f477c ] The code was written under the assumption that the regmap_update_bits() would mask the bits in the mask and set the bits in the value. It missed the points that it will not set bits in the value unless these are also masked in the mask. Set value bits that are not in the mask will simply be ignored. Fixes: 06351d13 ("pinctrl: add a Gemini SoC pin controller") Signed-off-by:
-
Hieu Tran Dang authored
[ Upstream commit de8978c3 ] Certain devices don't work well when a transmit FIFO underrun or receive FIFO overrun occurs. Example is the SAF400x radio chip when running at high speed which leads to garbage being sent to/received from the chip. In which case, it should stall waiting for further data to be available before proceeding. This patch unset the NOSTALL bit in CFGR1 by default to prevent this issue. Signed-off-by:
Hieu Tran Dang <dangtranhieu2012@gmail.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit 70728c29 ] The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT and chip->set is valid pointer. This happens in case the controller uses the default GPIO setter. Always use chip->set to access the setter to avoid possible NULL pointer dereferencing. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit 29724956 ] XDP can modify (and resize) the Ethernet header in the packet. There is a bug in generic-XDP, because skb->protocol and skb->pkt_type are setup before reaching (netif_receive_)generic_xdp. This bug was hit when XDP were popping VLAN headers (changing eth->h_proto), as skb->protocol still contains VLAN-indication (ETH_P_8021Q) causing invocation of skb_vlan_untag(skb), which corrupt the packet (basically popping the VLAN again). This patch catch if XDP changed eth header in such a way, that SKB fields needs to be updated. V2: on request from Song Liu, use ETH_HLEN instead of mac_len, in __skb_push() as eth_type_trans() use ETH_HLEN in paired skb_pull_inline(). Fixes: d4455169 ("net: xdp: support xdp generic on virtual devices") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 8af03d1a ] In btf_parse_hdr(), the length of the btf data header is firstly copied from the user space to 'hdr_len' and checked to see whether it is larger than 'btf_data_size'. If yes, an error code EINVAL is returned. Otherwise, the whole header is copied again from the user space to 'btf->hdr'. However, after the second copy, there is no check between 'btf->hdr->hdr_len' and 'hdr_len' to confirm that the two copies get the same value. Given that the btf data is in the user space, a malicious user can race to change the data between the two copies. By doing so, the user can provide malicious data to the kernel and cause undefined behavior. This patch adds a necessary check after the second copy, to make sure 'btf->hdr->hdr_len' has the same value as 'hdr_len'. Otherwise, an error code EINVAL will be returned. Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 51fbf14f ] The only use of KEXEC_BACKUP_SRC_END is as an argument to walk_system_ram_res(): int crash_load_segments(struct kimage *image) { ... walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END, image, determine_backup_region); walk_system_ram_res() expects "start, end" arguments that are inclusive, i.e., the range to be walked includes both the start and end addresses. KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the first address *past* the desired 0-640KB range. Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC region is [0-0x9ffff], not [0-0xa0000]. Fixes: dd5f7260 ("kexec: support for kexec on panic using new system call") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Zhoujie Wu authored
[ Upstream commit 8a57fc38 ] When do GC, the number of read/write sectors are determined by max_write_pgs(see gc_rq preparation in pblk_gc_line_prepare_ws). Due to max_write_pgs doesn't consider max hw sectors supported by nvme controller(128K), which leads to GC tries to read 64 * 4K in one command, and see below error caused by pblk_bio_map_addr in function pblk_submit_read_gc. [ 2923.005376] pblk: could not add page to bio [ 2923.005377] pblk: could not allocate GC bio (18446744073709551604) Signed-off-by:
Zhoujie Wu <zjwu@marvell.com> Reviewed-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit a70985f8 ] In the too many bad blocks error handling case, we should release all the allocated resources, otherwise it will cause memory leak. Fixes: 2deeefc0 ("lightnvm: pblk: fail gracefully on line alloc. failure") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by:
-
Javier González authored
[ Upstream commit 6fd05cad ] 1.2 devices exposes their data and metadata size through the separate identify command. Make sure that the NVMe LBA format does not override these values. Signed-off-by:
-
