- 29 Oct, 2014 20 commits
-
-
Andriy Skulysh authored
Resources scif1_resources & scif2_resources overlap. Actual SCIF region size is 0x10. This is regression from commit d850acf9 ("sh: Declare SCIF register base and IRQ as resources") Signed-off-by:
Andriy Skulysh <askulysh@gmail.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Weijie Yang authored
There is a rare NULL pointer bug in mem_used_total_show() and mem_used_max_store() in concurrent situation, like this: zram is not initialized, process A is a mem_used_total reader which runs periodically, while process B try to init zram. process A process B access meta, get a NULL value init zram, done init_done() is true access meta->mem_pool, get a NULL pointer BUG This patch fixes this issue. Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Acked-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
The SLUB cache merges caches with the same size and alignment and there was long standing bug with this behavior: - create the cache named "foo" - create the cache named "bar" (which is merged with "foo") - delete the cache named "foo" (but it stays allocated because "bar" uses it) - create the cache named "foo" again - it fails because the name "foo" is already used That bug was fixed in commit 69461747 ("slab_common: fix the check for duplicate slab names") by not warning on duplicate cache names when the SLUB subsystem is used. Recently, cache merging was implemented the with SLAB subsystem too, in 12220dea ("mm/slab: support slab merge")). Therefore we need stop checking for duplicate names even for the SLAB subsystem. This patch fixes the bug by removing the check. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Richard Weinberger authored
d_splice_alias() can return a valid dentry, NULL or an ERR_PTR. Currently the code checks not for ERR_PTR and will cuase an oops in ocfs2_dentry_attach_lock(). Fix this by using IS_ERR_OR_NULL(). Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Johannes Weiner authored
page_remove_rmap() has too many branches on PageAnon() and is hard to follow. Move the file part into a separate function. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by:
-
Johannes Weiner authored
Commit 0a31bc97 ("mm: memcontrol: rewrite uncharge API") changed page migration to uncharge the old page right away. The page is locked, unmapped, truncated, and off the LRU, but it could race with writeback ending, which then doesn't unaccount the page properly: test_clear_page_writeback() migration wait_on_page_writeback() TestClearPageWriteback() mem_cgroup_migrate() clear PCG_USED mem_cgroup_update_page_stat() if (PageCgroupUsed(pc)) decrease memcg pages under writeback release pc->mem_cgroup->move_lock The per-page statistics interface is heavily optimized to avoid a function call and a lookup_page_cgroup() in the file unmap fast path, which means it doesn't verify whether a page is still charged before clearing PageWriteback() and it has to do it in the stat update later. Rework it so that it looks up the page's memcg once at the beginning of the transaction and then uses it throughout. The charge will be verified before clearing PageWriteback() and migration can't uncharge the page as long as that is still set. The RCU lock will protect the memcg past uncharge. As far as losing the optimization goes, the following test results are from a microbenchmark that maps, faults, and unmaps a 4GB sparse file three times in a nested fashion, so that there are two negative passes that don't account but still go through the new transaction overhead. There is no actual difference: old: 33.195102545 seconds time elapsed ( +- 0.01% ) new: 33.199231369 seconds time elapsed ( +- 0.03% ) The time spent in page_remove_rmap()'s callees still adds up to the same, but the time spent in the function itself seems reduced: # Children Self Command Shared Object Symbol old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap Signed-off-by:
-
Johannes Weiner authored
A follow-up patch would have changed the call signature. To save the trouble, just fold it instead. Signed-off-by:
-
Jan Kara authored
If __bitmap_shift_left() or __bitmap_shift_right() are asked to shift by a multiple of BITS_PER_LONG, they will try to shift a long value by BITS_PER_LONG bits which is undefined. Change the functions to avoid the undefined shift. Coverity id: 1192175 Coverity id: 1192174 Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Machek authored
Fix register value in bq32000 trickle charging. Mike reported that I'm using wrong value in one trickle-charging case, and after checking docs, I must admit he's right. Signed-off-by:
Pavel Machek <pavel@denx.de> Reported-by:
Mike Bremford <mike@bfo.com> Signed-off-by:
-
Yasuaki Ishimatsu authored
When hot adding the same memory after hot removal, the following messages are shown: WARNING: CPU: 20 PID: 6 at mm/page_alloc.c:4968 free_area_init_node+0x3fe/0x426() ... Call Trace: dump_stack+0x46/0x58 warn_slowpath_common+0x81/0xa0 warn_slowpath_null+0x1a/0x20 free_area_init_node+0x3fe/0x426 hotadd_new_pgdat+0x90/0x110 add_memory+0xd4/0x200 acpi_memory_device_add+0x1aa/0x289 acpi_bus_attach+0xfd/0x204 acpi_bus_attach+0x178/0x204 acpi_bus_scan+0x6a/0x90 acpi_device_hotplug+0xe8/0x418 acpi_hotplug_work_fn+0x1f/0x2b process_one_work+0x14e/0x3f0 worker_thread+0x11b/0x510 kthread+0xe1/0x100 ret_from_fork+0x7c/0xb0 The detaled explanation is as follows: When hot removing memory, pgdat is set to 0 in try_offline_node(). But if the pgdat is allocated by bootmem allocator, the clearing step is skipped. And when hot adding the same memory, the uninitialized pgdat is reused. But free_area_init_node() checks wether pgdat is set to zero. As a result, free_area_init_node() hits WARN_ON(). This patch clears pgdat which is allocated by bootmem allocator in try_offline_node(). Signed-off-by:Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Marek Szyprowski authored
Fix unconditional initialization failure on non-exynos3250 SoCs. Commit df9e26d0 ("rtc: s3c: add support for RTC of Exynos3250 SoC") introduced rtc source clock support, but also added initialization failure on SoCs, which doesn't need such clock. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Martin Schwidefsky authored
Found this in the message log on a s390 system: BUG kmalloc-192 (Not tainted): Poison overwritten Disabling lock debugging due to kernel taint INFO: 0x00000000684761f4-0x00000000684761f7. First byte 0xff instead of 0x6b INFO: Allocated in call_usermodehelper_setup+0x70/0x128 age=71 cpu=2 pid=648 __slab_alloc.isra.47.constprop.56+0x5f6/0x658 kmem_cache_alloc_trace+0x106/0x408 call_usermodehelper_setup+0x70/0x128 call_usermodehelper+0x62/0x90 cgroup_release_agent+0x178/0x1c0 process_one_work+0x36e/0x680 worker_thread+0x2f0/0x4f8 kthread+0x10a/0x120 kernel_thread_starter+0x6/0xc kernel_thread_starter+0x0/0xc INFO: Freed in call_usermodehelper_exec+0x110/0x1b8 age=71 cpu=2 pid=648 __slab_free+0x94/0x560 kfree+0x364/0x3e0 call_usermodehelper_exec+0x110/0x1b8 cgroup_release_agent+0x178/0x1c0 process_one_work+0x36e/0x680 worker_thread+0x2f0/0x4f8 kthread+0x10a/0x120 kernel_thread_starter+0x6/0xc kernel_thread_starter+0x0/0xc There is a use-after-free bug on the subprocess_info structure allocated by the user mode helper. In case do_execve() returns with an error ____call_usermodehelper() stores the error code to sub_info->retval, but sub_info can already have been freed. Regarding UMH_NO_WAIT, the sub_info structure can be freed by __call_usermodehelper() before the worker thread returns from do_execve(), allowing memory corruption when do_execve() failed after exec_mmap() is called. Regarding UMH_WAIT_EXEC, the call to umh_complete() allows call_usermodehelper_exec() to continue which then frees sub_info. To fix this race the code needs to make sure that the call to call_usermodehelper_freeinfo() is always done after the last store to sub_info->retval. Signed-off-by:Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by:
Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Stanimir Varbanov authored
Adds support for RTC device inside PM8941 PMIC. The RTC in this PMIC have two register spaces. Thus the rtc-pm8xxx is slightly reworked to reflect these differences. The register set for different PMIC chips are selected on DT compatible string base. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: simplify and fix locking in pm8xxx_rtc_set_time()] Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David Rientjes authored
If an anonymous mapping is not allowed to fault thp memory and then madvise(MADV_HUGEPAGE) is used after fault, khugepaged will never collapse this memory into thp memory. This occurs because the madvise(2) handler for thp, hugepage_madvise(), clears VM_NOHUGEPAGE on the stack and it isn't stored in vma->vm_flags until the final action of madvise_behavior(). This causes the khugepaged_enter_vma_merge() to be a no-op in hugepage_madvise() when the vma had previously had VM_NOHUGEPAGE set. Fix this by passing the correct vma flags to the khugepaged mm slot handler. There's no chance khugepaged can run on this vma until after madvise_behavior() returns since we hold mm->mmap_sem. It would be possible to clear VM_NOHUGEPAGE directly from vma->vm_flags in hugepage_advise(), but I didn't want to introduce special case behavior into madvise_behavior(). I think it's best to just let it always set vma->vm_flags itself. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Suleiman Souhlal <suleiman@google.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marek Szyprowski authored
Driver calling of_reserved_mem_device_init() might be interested if the initialization has been successful or not, so add support for returning error code. This fixes a build warining caused by commit 7bfa5ab6 ("drivers: dma-coherent: add initialization from device tree"), which has been merged without this change and without fixing function return value. Fixes: 7bfa5ab6 ("drivers: dma-coherent: add initialization from device tree") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Laura Abbott <lauraa@codeaurora.org> Cc: Josh Cartwright <joshc@codeaurora.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Yu Zhao authored
Compound page should be freed by put_page() or free_pages() with correct order. Not doing so will cause tail pages leaked. The compound order can be obtained by compound_order() or use HPAGE_PMD_ORDER in our case. Some people would argue the latter is faster but I prefer the former which is more general. This bug was observed not just on our servers (the worst case we saw is 11G leaked on a 48G machine) but also on our workstations running Ubuntu based distro. $ cat /proc/vmstat | grep thp_zero_page_alloc thp_zero_page_alloc 55 thp_zero_page_alloc_failed 0 This means there is (thp_zero_page_alloc - 1) * (2M - 4K) memory leaked. Fixes: 97ae1749 ("thp: implement refcounting for huge zero page") Signed-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Rientjes <rientjes@google.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by:
-
Riku Voipio authored
Following up the arm testing of gcov, turns out gcov on ARM64 works fine as well. Only change needed is adding ARM64 to Kconfig depends. Tested with qemu and mach-virt Signed-off-by:
Riku Voipio <riku.voipio@linaro.org> Acked-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Jerry Hoemann authored
During file system stress testing on 3.10 and 3.12 based kernels, the umount command occasionally hung in fsnotify_unmount_inodes in the section of code: spin_lock(&inode->i_lock); if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { spin_unlock(&inode->i_lock); continue; } As this section of code holds the global inode_sb_list_lock, eventually the system hangs trying to acquire the lock. Multiple crash dumps showed: The inode->i_state == 0x60 and i_count == 0 and i_sb_list would point back at itself. As this is not the value of list upon entry to the function, the kernel never exits the loop. To help narrow down problem, the call to list_del_init in inode_sb_list_del was changed to list_del. This poisons the pointers in the i_sb_list and causes a kernel to panic if it transverse a freed inode. Subsequent stress testing paniced in fsnotify_unmount_inodes at the bottom of the list_for_each_entry_safe loop showing next_i had become free. We believe the root cause of the problem is that next_i is being freed during the window of time that the list_for_each_entry_safe loop temporarily releases inode_sb_list_lock to call fsnotify and fsnotify_inode_delete. The code in fsnotify_unmount_inodes attempts to prevent the freeing of inode and next_i by calling __iget. However, the code doesn't do the __iget call on next_i if i_count == 0 or if i_state & (I_FREEING | I_WILL_FREE) The patch addresses this issue by advancing next_i in the above two cases until we either find a next_i which we can __iget or we reach the end of the list. This makes the handling of next_i more closely match the handling of the variable "inode." The time to reproduce the hang is highly variable (from hours to days.) We ran the stress test on a 3.10 kernel with the proposed patch for a week without failure. During list_for_each_entry_safe, next_i is becoming free causing the loop to never terminate. Advance next_i in those cases where __iget is not done. Signed-off-by:Jerry Hoemann <jerry.hoemann@hp.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Ken Helias <kenhelias@firemail.de> Signed-off-by:
-
Joonsoo Kim authored
Commit edc2ca61 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") commonizes isolate_migratepages variants and make them use isolate_migratepages_block(). isolate_migratepages_block() could stop the execution when enough pages are isolated, but, there is no code in isolate_migratepages_range() to handle this case. In the result, even if isolate_migratepages_block() returns prematurely without checking all pages in the range, isolate_migratepages_block() is called repeately on the following pageblock and some pages in the previous range are skipped to check. Then, CMA is failed frequently due to this fact. To fix this problem, this patch let isolate_migratepages_range() know the situation that enough pages are isolated and stop the isolation in that case. Note that isolate_migratepages() has no such problem, because, it always stops the isolation after just one call of isolate_migratepages_block(). Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by:
-
Wang Nan authored
Commit ff7ee93f ("cgroup/kmemleak: Annotate alloc_page() for cgroup allocations") introduces kmemleak_alloc() for alloc_page_cgroup(), but corresponding kmemleak_free() is missing, which makes kmemleak be wrongly disabled after memory offlining. Log is pasted at the end of this commit message. This patch add kmemleak_free() into free_page_cgroup(). During page offlining, this patch removes corresponding entries in kmemleak rbtree. After that, the freed memory can be allocated again by other subsystems without killing kmemleak. bash # for x in 1 2 3 4; do echo offline > /sys/devices/system/memory/memory$x/state ; sleep 1; done ; dmesg | grep leak Offlined Pages 32768 kmemleak: Cannot insert 0xffff880016969000 into the object search tree (overlaps existing) CPU: 0 PID: 412 Comm: sleep Not tainted 3.17.0-rc5+ #86 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Call Trace: dump_stack+0x46/0x58 create_object+0x266/0x2c0 kmemleak_alloc+0x26/0x50 kmem_cache_alloc+0xd3/0x160 __sigqueue_alloc+0x49/0xd0 __send_signal+0xcb/0x410 send_signal+0x45/0x90 __group_send_sig_info+0x13/0x20 do_notify_parent+0x1bb/0x260 do_exit+0x767/0xa40 do_group_exit+0x44/0xa0 SyS_exit_group+0x17/0x20 system_call_fastpath+0x16/0x1b kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff880016900000 (size 524288): kmemleak: comm "swapper/0", pid 0, jiffies 4294667296 kmemleak: min_count = 0 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: log_early+0x63/0x77 kmemleak_alloc+0x4b/0x50 init_section_page_cgroup+0x7f/0xf5 page_cgroup_init+0xc5/0xd0 start_kernel+0x333/0x408 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf5/0xfc Fixes: ff7ee93f (cgroup/kmemleak: Annotate alloc_page() for cgroup allocations) Signed-off-by:
Wang Nan <wangnan0@huawei.com> Acked-by:
-
- 28 Oct, 2014 4 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull two nfsd fixes from Bruce Fields: "One regression from the 3.16 xdr rewrite, one an older bug exposed by a separate bug in the client's new SEEK code" * 'for-3.18' of git://linux-nfs.org/~bfields/linux: nfsd4: fix crash on unknown operation number nfsd4: fix response size estimation for OP_SEQUENCE
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace trampoline accounting fixes from Steven Rostedt: "Adding the new code for 3.19, I discovered a couple of minor bugs with the accounting of the ftrace_ops trampoline logic. One was that the old hash was not updated before calling the modify code for an ftrace_ops. The second bug was what let the first bug go unnoticed, as the update would check the current hash for all ftrace_ops (where it should only check the old hash for modified ones). This let things work when only one ftrace_ops was registered to a function, but could break if more than one was registered depending on the order of the look ups. The worse thing that can happen if this bug triggers is that the ftrace self checks would find an anomaly and shut itself down" * tag 'trace-fixes-v3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix checking of trampoline ftrace_ops in finding trampoline ftrace: Set ops->old_hash on modifying what an ops hooks to
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A couple of ARM fixes. We fix some printk formats for ptrdiff_t quantities which cause GCC 4.9 to complain, and we also blacklist known buggy GCC 4.8.x compilers as their miscompilation is serious enough to cause filesystem corruption, even through many distros have fixed their versions" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: fix some printk formats ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854
-
Will Deacon authored
When unmapping a range of pages in zap_pte_range, the page being unmapped is added to an mmu_gather_batch structure for asynchronous freeing. If we run out of space in the batch structure before the range has been completely unmapped, then we break out of the loop, force a TLB flush and free the pages that we have batched so far. If there are further pages to unmap, then we resume the loop where we left off. Unfortunately, we forget to update addr when we break out of the loop, which causes us to truncate the range being invalidated as the end address is exclusive. When we re-enter the loop at the same address, the page has already been freed and the pte_present test will fail, meaning that we do not reconsider the address for invalidation. This patch fixes the problem by incrementing addr by the PAGE_SIZE before breaking out of the loop on batch failure. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 27 Oct, 2014 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "A series of driver fixes: - a few compilation fixes with randconfigs - one potential compilation breakage on userspace due to the usage of a gcc extension - several warnings fixed - some other random driver fixes" * tag 'media/v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (22 commits) [media] s5p-jpeg: Avoid -Wuninitialized warning in s5p_jpeg_parse_hdr [media] s5p-fimc: Only build suspend/resume for PM [media] s5p-jpeg: Only build suspend/resume for PM [media] Remove references to non-existent PLAT_S5P symbol [media] videobuf-dma-contig: set vm_pgoff to be zero to pass the sanity check in vm_iomap_memory() [media] tw68: remove bogus I2C_ALGOBIT dependency [media] usbvision-video: two use after frees [media] tw68: remove deprecated IRQF_DISABLED [media] xc5000: use after free in release() [media] em28xx-input: NULL dereference on error [media] wl128x: fix fmdbg compiler warning Revert "[media] v4l2-dv-timings: fix a sparse warning" [media] hackrf: harmless off by one in debug code [media] cx23885: initialize config structs for T9580 [media] v4l: uvcvideo: Fix buffer completion size check [media] vivid: fix buffer overrun [media] saa7146: Create a device name before it's used [media] em28xx: fix uninitialized variable warning [media] vivid: fix Kconfig FB dependency [media] anysee: make sure loading modules is const ... -
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: "Correct severity of reported errors in several EDAC drivers. From Jason Baron" * tag 'edac_fixes_for_3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: e7xxx_edac: Report CE events properly cpc925_edac: Report UE events properly i82860_edac: Report CE events properly i3200_edac: Report CE events properly
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "Quite a few driver fixes in here, including some fairly substantial ones for the recently added Rockchip driver, plus a fix for spidev to more reliably support bidirectional transfers which is fairly large but basically mechanical. It's a bit more code than I'd like but all fixes" * tag 'spi-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: orion: fix potential NULL pointer de-reference spi/rockchip: spi controller must be disabled in tx callback too spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode spi/rockchip: fix bug that case spi can't go as fast as slave request spi: pl022: Fix incorrect dma_unmap_sg spi: spidev: Use separate TX and RX bounce buffers spi: dw: Initialize of_node to discover DT node children
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "A couple of fixes for v3.18, one fix for an incorrect voltage to register mapping in the rk808 driver and a fix for a build failure in some SH defconfigs" * tag 'regulator-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Include err.h from consumer.h to fix build failure regulator: rk808: Fix min_uV for DCDC1 & DCDC2
-
Mark Brown authored
Merge remote-tracking branches 'spi/fix/dw', 'spi/fix/orion', 'spi/fix/pl022', 'spi/fix/rockchip' and 'spi/fix/spidev' into spi-linus
-
Mark Brown authored
-
Mark Brown authored
-
- 26 Oct, 2014 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Another week, another small batch of fixes. Most of these make zynq, socfpga and sunxi platforms work a bit better: - due to new requirements for regulators, DWMMC on socfpga broke past v3.17 - SMP spinup fix for socfpga - a few DT fixes for zynq - another option (FIXED_REGULATOR) for sunxi is needed that used to be selected by other options but no longer is. - a couple of small DT fixes for at91 - ...and a couple for i.MX" * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry arm: socfpga: fix fetching cpu1start_addr for SMP ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs updates from Al Viro: "overlayfs merge + leak fix for d_splice_alias() failure exits" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: overlayfs: embed middle into overlay_readdir_data overlayfs: embed root into overlay_readdir_data overlayfs: make ovl_cache_entry->name an array instead of pointer overlayfs: don't hold ->i_mutex over opening the real directory fix inode leaks on d_splice_alias() failure exits fs: limit filesystem stacking depth overlay: overlay filesystem documentation overlayfs: implement show_options overlayfs: add statfs support overlay filesystem shmem: support RENAME_WHITEOUT ext4: support RENAME_WHITEOUT vfs: add RENAME_WHITEOUT vfs: add whiteout support vfs: export check_sticky() vfs: introduce clone_private_mount() vfs: export __inode_permission() to modules vfs: export do_splice_direct() to modules vfs: add i_op->dentry_open()
-
Olof Johansson authored
Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- 25 Oct, 2014 5 commits
-
-
Fabio Estevam authored
Commit 78b81f46 ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f46. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org>
-
Steve Longerbeam authored
Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by:
Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by:
-
Al Viro authored
same story... Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
no sense having it a pointer - all instances have it pointing to local variable in the same stack frame Signed-off-by: -
Al Viro authored
Signed-off-by:
-
