- 28 Mar, 2016 11 commits
-
-
Florian Westphal authored
Ben Hawkes says: In the mark_source_chains function (net/ipv4/netfilter/ip_tables.c) it is possible for a user-supplied ipt_entry structure to have a large next_offset field. This field is not bounds checked prior to writing a counter value at the supplied offset. Problem is that mark_source_chains should not have been called -- the rule doesn't have a next entry, so its supposed to return an absolute verdict of either ACCEPT or DROP. However, the function conditional() doesn't work as the name implies. It only checks that the rule is using wildcard address matching. However, an unconditional rule must also not be using any matches (no -m args). The underflow validator only checked the addresses, therefore passing the 'unconditional absolute verdict' test, while mark_source_chains also tested for presence of matches, and thus proceeeded to the next (not-existent) rule. Unify this so that all the callers have same idea of 'unconditional rule'. Reported-by:
Ben Hawkes <hawkes@google.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Otherwise this function may read data beyond the ruleset blob. Signed-off-by:
-
Florian Westphal authored
We should check that e->target_offset is sane before mark_source_chains gets called since it will fetch the target entry for loop detection. Signed-off-by:
-
Arnd Bergmann authored
The openvswitch code has gained support for calling into the nf-nat-ipv4/ipv6 modules, however those can be loadable modules in a configuration in which openvswitch is built-in, leading to link errors: net/built-in.o: In function `__ovs_ct_lookup': :(.text+0x2cc2c8): undefined reference to `nf_nat_icmp_reply_translation' :(.text+0x2cc66c): undefined reference to `nf_nat_icmpv6_reply_translation' The dependency on (!NF_NAT || NF_NAT) prevents similar issues, but NF_NAT is set to 'y' if any of the symbols selecting it are built-in, but the link error happens when any of them are modular. A second issue is that even if CONFIG_NF_NAT_IPV6 is built-in, CONFIG_NF_NAT_IPV4 might be completely disabled. This is unlikely to be useful in practice, but the driver currently only handles IPv6 being optional. This patch improves the Kconfig dependency so that openvswitch cannot be built-in if either of the two other symbols are set to 'm', and it replaces the incorrect #ifdef in ovs_ct_nat_execute() with two "if (IS_ENABLED())" checks that should catch all corner cases also make the code more readable. The same #ifdef exists ovs_ct_nat_to_attr(), where it does not cause a link error, but for consistency I'm changing it the same way. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 05752523 ("openvswitch: Interface with NAT.") Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
-
Jarno Rajahalme authored
OVS should call into CT NAT for packets of new expected connections only when the conntrack state is persisted with the 'commit' option to the OVS CT action. The test for this condition is doubly wrong, as the CT status field is ANDed with the bit number (IPS_EXPECTED_BIT) rather than the mask (IPS_EXPECTED), and due to the wrong assumption that the expected bit would apply only for the first (i.e., 'new') packet of a connection, while in fact the expected bit remains on for the lifetime of an expected connection. The 'ctinfo' value IP_CT_RELATED derived from the ct status can be used instead, as it is only ever applicable to the 'new' packets of the expected connection. Fixes: 05752523 ('openvswitch: Interface with NAT.') Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jarno Rajahalme <jarno@ovn.org> Signed-off-by:
-
Vishwanath Pai authored
This fix adds a new reference counter (ref_netlink) for the struct ip_set. The other reference counter (ref) can be swapped out by ip_set_swap and we need a separate counter to keep track of references for netlink events like dump. Using the same ref counter for dump causes a race condition which can be demonstrated by the following script: ipset create hash_ip1 hash:ip family inet hashsize 1024 maxelem 500000 \ counters ipset create hash_ip2 hash:ip family inet hashsize 300000 maxelem 500000 \ counters ipset create hash_ip3 hash:ip family inet hashsize 1024 maxelem 500000 \ counters ipset save & ipset swap hash_ip3 hash_ip2 ipset destroy hash_ip3 /* will crash the machine */ Swap will exchange the values of ref so destroy will see ref = 0 instead of ref = 1. With this fix in place swap will not succeed because ipset save still has ref_netlink on the set (ip_set_swap doesn't swap ref_netlink). Both delete and swap will error out if ref_netlink != 0 on the set. Note: The changes to *_head functions is because previously we would increment ref whenever we called these functions, we don't do that anymore. Reviewed-by:
Joshua Hunt <johunt@akamai.com> Signed-off-by:
Vishwanath Pai <vpai@akamai.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Lino Sanfilippo authored
In ravb_start_xmit dont call skb_tx_timestamp only when hardware timestamping is requested: in the latter case software timestamps are suppressed and thus the call of skb_tx_timestamp does not have any effect. Instead call skb_tx_timestamp unconditionally in ravb_start_xmit, since the function checks itself if software timestamping is required or should be skipped due to hardware timestamping. Signed-off-by:
Lino Sanfilippo <LinoSanfilippo@gmx.de> Acked-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rasmus Villemoes authored
We need to use post-decrement to ensure that irq_dispose_mapping is also called on priv->rxq[0]->irq_no; moreover, if one of the above for loops failed already at i==0 (so we reach one of these labels with that value of i), we'll enter an essentially infinite loop of out-of-bounds accesses. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Cosmin-Gabriel Samoila authored
Fix variable assignment inside if statement. It is error-prone and hard to read. Signed-off-by:
Cosmin-Gabriel Samoila <gabrielcsmo@gmail.com> Signed-off-by:
-
Quentin Armitage authored
For a route with IPv6 encapsulation, the traffic class and hop limit values are interchanged when returned to userspace by the kernel. For example, see below. ># ip route add 192.168.0.1 dev eth0.2 encap ip6 dst 0x50 tc 0x50 hoplimit 100 table 1000 ># ip route show table 1000 192.168.0.1 encap ip6 id 0 src :: dst fe83::1 hoplimit 80 tc 100 dev eth0.2 scope link Signed-off-by:
Quentin Armitage <quentin@armitage.org.uk> Signed-off-by:
-
Diego Viola authored
Signed-off-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
-
- 25 Mar, 2016 5 commits
-
-
Cyrille Pitchen authored
This patch removes two BUG_ON() used to notify about RX queue corruptions on macb (not gem) hardware without actually handling the error. The new code skips corrupted frames but still processes faultless frames. Then it resets the RX queue before restarting the reception from a clean state. This patch is a rework of an older patch proposed by Neil Armstrong: http://patchwork.ozlabs.org/patch/371525/Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Manish Chopra authored
Just updating version as many fixes got accumulated over 1.00.00.34 Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Jaedon Shin authored
Add PHY entries for the Broadcom BCM7346 and BCM7362 chips, these are 40nm generation Ethernet PHY. Fixes: 815717d1 ("net: phy: bcm7xxx: Remove wildcard entries") Signed-off-by:
Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Add map_flags attribute to bpf_map_show_fdinfo(), so that tools like tc can check for them when loading objects from a pinned entry, e.g. if user intent wrt allocation (BPF_F_NO_PREALLOC) is different to the pinned object, it can bail out. Follow-up to 6c905981 ("bpf: pre-allocate hash map elements"), so that tc can still support this with v4.6. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Bjorn Helgaas authored
netpoll_setup() does a dev_hold() on np->dev, the netpoll device. If it fails, it correctly does a dev_put() but leaves np->dev set. If we call netpoll_cleanup() after the failure, np->dev is still set so we do another dev_put(), which decrements the refcount an extra time. It's questionable to call netpoll_cleanup() after netpoll_setup() fails, but it can be difficult to find the problem, and we can easily avoid it in this case. The extra decrements can lead to hangs like this: unregister_netdevice: waiting for bond0 to become free. Usage count = -3 Set and clear np->dev at the points where we dev_hold() and dev_put() the device. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
- 24 Mar, 2016 24 commits
-
-
Petri Gynther authored
skb_len needs to be skb_headlen(skb) in bcmgenet_xmit_single(). Fragmented skbs can have only Ethernet + IP + TCP headers (14+20+20=54 bytes) in the linear buffer, followed by the rest in fragments. Bumping skb_len to ETH_ZLEN would be incorrect for this case, as it would introduce garbage between TCP header and the fragment data. This also works with regular/non-fragmented small packets < ETH_ZLEN bytes. Successfully tested this on GENETv3 with 42-byte ARP frames. For testing, I used: ethtool -K eth0 tx-checksum-ipv4 off ethtool -K eth0 tx-checksum-ipv6 off echo 0 > /proc/sys/net/ipv4/tcp_timestamps Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Petri Gynther <pgynther@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Petri Gynther authored
1. Add bytes_compl local variable to __bcmgenet_tx_reclaim() to collect transmitted bytes. dev->stats updates can then be moved outside the while-loop. bytes_compl is also needed for future BQL support. 2. When bcmgenet device uses Tx checksum offload, each transmitted skb gets an extra 64-byte header prepended to it. Before this header is prepended to the skb, we need to save the skb "wire" length in GENET_CB(skb)->bytes_sent, so that proper Tx bytes accounting can be done in __bcmgenet_tx_reclaim(). 3. skb->len covers the entire length of skb, whether it is linear or fragmented. Thus, when we clean the fragments, do not increase transmitted bytes. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Nicolas Dichtel authored
Two minor typo. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Cyrille Pitchen authored
macb_interrupt() should not use macb_writel(bp, ISR, <value>) but only queue_writel(queue, ISR, <value>). There is one IRQ and one set of {ISR, IER, IDR, IMR} [1] registers per queue on gem hardware, though only queue0 is actually used for now to receive frames: other queues can already be used to transmit frames. The queue_readl() and queue_writel() helper macros are designed to access the relevant IRQ registers. [1] ISR: Interrupt Status Register IER: Interrupt Enable Register IDR: Interrupt Disable Register IMR: Interrupt Mask Register Signed-off-by: -
David S. Miller authored
Yisen Zhuang says: ==================== net: hns: fix some bugs in HNS driver Here are some bug fixed patches for HNS driver. They are: >from Kejian, fix for the warning of passing zero to 'PTR_ERR' >from qianqian, four fixes for inappropriate operation in hns driver >from Sheng, one fix for optimization of irq proccess in hns driver, and one fix for hilink status for hns driver. For more details, please see individual patches. ==================== Signed-off-by: -
Sheng Li authored
The hilink status reg in HNS V2 is different from HNS v1. In HNS V2, It distinguishes differnt lane status according to the bit-field of the reg. As is shown below: [0:0] ---> lane0 [1:1] ---> lane1 ... But the current driver reads the reg to get the hilink status ONLY concidering HNS V1 situation. Here is a patch to support both of them. Signed-off-by:
Sheng Li <lisheng011@huawei.com> Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Signed-off-by:
-
Kejian Yan authored
There is a misuse of PTR as shown below: ae_node = (void *)of_parse_phandle(dev->of_node, "ae-handle", 0); if (IS_ERR_OR_NULL(ae_node)) { ret = PTR_ERR(ae_node); dev_err(dev, "not find ae-handle\n"); goto out_read_prop_fail; } if the ae_node is NULL, PTR_ERR(ae_node) means it returns success. And the return value should be -ENODEV. Signed-off-by:Kejian Yan <yankejian@huawei.com> Signed-off-by:
Yisen Zhuang <Yisen.Zhuang@huawei.com> Signed-off-by:
-
Sheng Li authored
In hns V1, common_poll should check and clean fbd pkts, because it can not pend irq to clean them if there is no new pkt comes in. But hns V2 hw fixes this bug, and will pend irq itself to do this. So, for hns V2, we set ring_data->fini_process to NULL. Signed-off-by:
-
Qianqian Xie authored
The variable head in hns_nic_tx_fini_pro has read a value, but it is obviously no use. The patch will fix it. And the comment is nothing to do with the routine, so it has to be removed Signed-off-by:
Qianqian Xie <xieqianqian@huawei.com> Signed-off-by:
-
Qianqian Xie authored
The return values in the first two functions mdiobus_write() are ignored. The patch will fix it. Signed-off-by:
-
Qianqian Xie authored
It misses string format in function snprintf(), as below: snprintf(buff, ETH_GSTRING_LEN, g_gmac_stats_string[i].desc); It needs to add "%s" to fix it as below: snprintf(buff, ETH_GSTRING_LEN, "%s", g_gmac_stats_string[i].desc); Signed-off-by:
-
Qianqian Xie authored
The cycle index should be varied while the variable j is a fixed value. The patch will fix this bug. Signed-off-by:
-
subashab@codeaurora.org authored
A crash is observed when a decrypted packet is processed in receive path. get_rps_cpus() tries to dereference the skb->dev fields but it appears that the device is freed from the poison pattern. [<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0 [<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc [<ffffffc000af6094>] netif_rx+0x74/0x94 [<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0 [<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c [<ffffffc000ba6eb8>] esp_input_done+0x20/0x30 [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 [<ffffffc0000bb40c>] kthread+0xe0/0xec -013|get_rps_cpu( | dev = 0xFFFFFFC08B688000, | skb = 0xFFFFFFC0C76AAC00 -> ( | dev = 0xFFFFFFC08B688000 -> ( | name = "...................................................... | name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev = 0xAAAAAAAAAAA Following are the sequence of events observed - - Encrypted packet in receive path from netdevice is queued - Encrypted packet queued for decryption (asynchronous) - Netdevice brought down and freed - Packet is decrypted and returned through callback in esp_input_done - Packet is queued again for process in network stack using netif_rx Since the device appears to have been freed, the dereference of skb->dev in get_rps_cpus() leads to an unhandled page fault exception. Fix this by holding on to device reference when queueing packets asynchronously and releasing the reference on call back return. v2: Make the change generic to xfrm as mentioned by Steffen and update the title to xfrm Suggested-by:Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Jerome Stanislaus <jeromes@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "Nothing major this round. Mostly small clean ups and fixes. Some visible changes: - A new flag was added to distinguish traces done in NMI context. - Preempt tracer now shows functions where preemption is disabled but interrupts are still enabled. Other notes: - Updates were done to function tracing to allow better performance with perf. - Infrastructure code has been added to allow for a new histogram feature for recording live trace event histograms that can be configured by simple user commands. The feature itself was just finished, but needs a round in linux-next before being pulled. This only includes some infrastructure changes that will be needed" * tag 'trace-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (22 commits) tracing: Record and show NMI state tracing: Fix trace_printk() to print when not using bprintk() tracing: Remove redundant reset per-CPU buff in irqsoff tracer x86: ftrace: Fix the misleading comment for arch/x86/kernel/ftrace.c tracing: Fix crash from reading trace_pipe with sendfile tracing: Have preempt(irqs)off trace preempt disabled functions tracing: Fix return while holding a lock in register_tracer() ftrace: Use kasprintf() in ftrace_profile_tracefs() ftrace: Update dynamic ftrace calls only if necessary ftrace: Make ftrace_hash_rec_enable return update bool tracing: Fix typoes in code comment and printk in trace_nop.c tracing, writeback: Replace cgroup path to cgroup ino tracing: Use flags instead of bool in trigger structure tracing: Add an unreg_all() callback to trigger commands tracing: Add needs_rec flag to event triggers tracing: Add a per-event-trigger 'paused' field tracing: Add get_syscall_name() tracing: Add event record param to trigger_ops.func() tracing: Make event trigger functions available tracing: Make ftrace_event_field checking functions available ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal updates from Zhang Rui: - Fix a regression where bogus trip points on some Lenovo laptops start to screw up thermal control after commit 81ad4276 ("Thermal: initialize thermal zone device correctly"). On these Lenovo laptops, a bogus passive trip point is reported, which is 0 degree Celsius. Without commit 81ad4276, thermal zone fails to set cooling devices to proper cooling state, which is a bug. But with commit 81ad4276 applied, the processors are always throttled on these Lenovo laptops because the current temperature is always higher than the passive trip point. Fix things to ignore such bogus trip points. (Zhang Rui) - Introduce Mediatek thermal driver. (Sascha Hauer) - Introduce devm_ versions of OF thermal sensor register API. (Laxman Dewangan) - Changes in Kconfigs to allow compile test on UM arch. (Krzysztof Kozlowski) - Introduce Skylake support in intel_pch_thermal driver. (Srinivas Pandruvada) - Several small fixes on Rockchip, TI-SoC, Tegra, RCar, and Exynos thermal drivers. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (26 commits) Thermal: Ignore invalid trip points thermal: trace: migrating thermal traces to use TRACE_DEFINE_ENUM() macros thermal: intel_pch_thermal: Enable Skylake PCH thermal thermal: doc: Add details of devm_thermal_zone_of_sensor_{register,unregister} thermal: of-thermal: Add devm version of thermal_zone_of_sensor_register thermal: doc: Add details of thermal_zone_of_sensor_{register,unregister} thermal: exynos: Defer probe if vtmu is present but not registered thermal: exynos: Use devm_regulator_get_optional() for vtmu thermal: exynos: List vtmu-supply as optional property in DT binding thermal: exynos: Print a message about exceeded number of supported trip-points thermal: exynos: Document number of supported trip-points thermal: exynos: Document compatible for Exynos5433 TMU thermal: mtk: allow compile testing on UM thermal: tegra_soctherm: fix sign bit of temperature thermal: Fix build error of missing devm_ioremap_resource on UM thermal: ti-soc-thermal: clean up the error handling a bit thermal: rcar: Use ARCH_RENESAS thermal: rcar_thermal: don't open code of_device_get_match_data() thermal: db8500_cpufreq_cooling: Compile with COMPILE_TEST thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399 ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "Various bugfixes, a RDMA update from Chuck Lever, and support for a new pnfs layout type from Christoph Hellwig. The new layout type is a variant of the block layout which uses SCSI features to offer improved fencing and device identification. (Also: note this pull request also includes the client side of SCSI layout, with Trond's permission.)" * tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux: sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race nfsd: recover: fix memory leak nfsd: fix deadlock secinfo+readdir compound nfsd4: resfh unused in nfsd4_secinfo svcrdma: Use new CQ API for RPC-over-RDMA server send CQs svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs svcrdma: Remove close_out exit path svcrdma: Hook up the logic to return ERR_CHUNK svcrdma: Use correct XID in error replies svcrdma: Make RDMA_ERROR messages work rpcrdma: Add RPCRDMA_HDRLEN_ERR svcrdma: svc_rdma_post_recv() should close connection on error svcrdma: Close connection when a send error occurs nfsd: Lower NFSv4.1 callback message size limit svcrdma: Do not send Write chunk XDR pad with inline content svcrdma: Do not write xdr_buf::tail in a Write chunk svcrdma: Find client-provided write and reply chunks once per reply nfsd: Update NFS server comments related to RDMA support nfsd: Fix a memory leak when meeting unsupported state_protect_how4 nfsd4: fix bad bounds checking
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some fixes that poped up due to the big staging tree merge, as well as the removal of a staging driver that now is covered by a "real" driver. All of these have been in linux-next for a few days with no reported issues" * tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: delete STE RMI4 hackish driver staging: android: ion_test: fix check of platform_device_register_simple() error code staging: wilc1000: fix a couple of memory leaks staging: fsl-mc: fix incorrect type passed to dev_err macros staging: fsl-mc: fix incorrect type passed to dev_dbg macros staging: wilc1000: fixed kernel panic when firmware is not started staging: comedi: ni_mio_common: fix the ni_write[blw]() functions staging: most: hdm-dim2: Remove possible dereference error staging: lustre: checking for NULL instead of IS_ERR staging: lustre: really make lustre dependent on LNet staging: refresh TODO for rtl8712 staging: refresh TODO for rtl8723au
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix to the pistachio clocksource driver using the proper signedness in the error print format" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/pistachio: Correct output format of PTR_ERR()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A small set of fixes for the usual ARM/SOC irqchip drivers - A set of fixes for mbigen to handle multiple devices in a hardware module proper - A cleanup for the mbigen config option which was pointlessly user configurable. - A cleanup for tegra replacing open coded functionality by the proper core function The config cleanup touches arch/arm64/Kconfig.platforms to select the irq chip for the related platform" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option ARM64: Kconfig: Select mbigen interrupt controller on Hisilicon platform irqchip/mbigen: Handle multiple device nodes in a mbigen module irqchip/mbigen: Adjust DT bindings to handle multiple devices in a module irqchip/tegra: Switch to use irq_domain_free_irqs_common -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "This tree contains various perf fixes on the kernel side, plus three hw/event-enablement late additions: - Intel Memory Bandwidth Monitoring events and handling - the AMD Accumulated Power Mechanism reporting facility - more IOMMU events ... and a final round of perf tooling updates/fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) perf llvm: Use strerror_r instead of the thread unsafe strerror one perf llvm: Use realpath to canonicalize paths perf tools: Unexport some methods unused outside strbuf.c perf probe: No need to use formatting strbuf method perf help: Use asprintf instead of adhoc equivalents perf tools: Remove unused perf_pathdup, xstrdup functions perf tools: Do not include stringify.h from the kernel sources tools include: Copy linux/stringify.h from the kernel tools lib traceevent: Remove redundant CPU output perf tools: Remove needless 'extern' from function prototypes perf tools: Simplify die() mechanism perf tools: Remove unused DIE_IF macro perf script: Remove lots of unused arguments perf thread: Rename perf_event__preprocess_sample_addr to thread__resolve perf machine: Rename perf_event__preprocess_sample to machine__resolve perf tools: Add cpumode to struct perf_sample perf tests: Forward the perf_sample in the dwarf unwind test perf tools: Remove misplaced __maybe_unused perf list: Fix documentation of :ppp perf bench numa: Fix assertion for nodes bitfield ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix hotplug bugs - fix irq live lock - fix various topology handling bugs - fix APIC ACK ordering - fix PV iopl handling - fix speling - fix/tweak memcpy_mcsafe() return value - fix fbcon bug - remove stray prototypes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Remove unused native_read_tscp() x86/apic: Remove declaration of unused hw_nmi_is_cpu_stuck x86/oprofile/nmi: Add missing hotplug FROZEN handling x86/hpet: Use proper mask to modify hotplug action x86/apic/uv: Fix the hotplug notifier x86/apb/timer: Use proper mask to modify hotplug action x86/topology: Use total_cpus not nr_cpu_ids for logical packages x86/topology: Fix Intel HT disable x86/topology: Fix logical package mapping x86/irq: Cure live lock in fixup_irqs() x86/tsc: Prevent NULL pointer deref in calibrate_delay_is_known() x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt() x86/iopl: Fix iopl capability check on Xen PV x86/iopl/64: Properly context-switch IOPL on Xen PV selftests/x86: Add an iopl test x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe() x86/video: Don't assume all FB devices are PCI devices arch/x86/irq: Purge useless handler declarations from hw_irq.h x86: Fix misspellings in comments
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixes: a cgroup fix, a fair-scheduler migration accounting fix, a cputime fix and two cpuacct cleanups" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpuacct: Simplify the cpuacct code sched/cpuacct: Rename parameter in cpuusage_write() for readability sched/fair: Add comments to explain select_idle_sibling() sched/fair: Fix fairness issue on migration sched/cgroup: Fix/cleanup cgroup teardown/init sched/cputime: Fix steal time accounting vs. CPU hotplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Documentation updates and a bitops ordering fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: bitops: Do not default to __clear_bit() for __clear_bit_unlock() documentation: Clarify compiler store-fusion example documentation: Transitivity is not cumulativity documentation: Add alternative release-acquire outcome documentation: Distinguish between local and global transitivity documentation: Subsequent writes ordered by rcu_dereference() documentation: Remove obsolete reference to RCU-protected indexes documentation: Fix memory-barriers.txt section references documentation: Fix control dependency and identical stores
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-20160323' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/core improvements and fixes: User visible fixes: - Fix documentation of :ppp modifier in 'perf list' (Andi Kleen) - Fix silly nodes bitfield bits/bytes length assertion in 'perf bench numa' (Jakub Jelen) - Remove redundant CPU output in libtraceevent (Steven Rostedt) - Remove 'core_id' check in topology 'perf test' (Sukadev Bhattiprolu) Infrastructure changes/fixes: - Record text offset in dso to calculate objdump address, to use with modules in addition to vDSO symbol address calculations (Wang Nan) - Move utilities.mak from perf to tools/scripts/ (Arnaldo Carvalho de Melo) - Add cpumode to the perf_sample struct, this way we don't need to pass the union event to the machine and thread resolving routines, shortening function signatures and allowing the future introduction of a way to use tracepoint events instead of the unavailable HW cycles counter on powerpc guests in perf kvm by just hooking on perf_evsel__parse_sample, at the end (Arnaldo Carvalho de Melo) - Remove/unexport die() related infrastructure, that at some point will finally be removed (Arnaldo Carvalho de Melo) - Adopt linux/stringify.h from the kernel sources, not to touch this kernel header from tools/ (Arnaldo Carvalho de Melo) - Stop using strbuf for things we can instead trivially use libc's asprintf() (Arnaldo Carvalho de Melo) - Ditch tools/lib/util/abspath.c, its only exported function was used at just one place and can be replaced by libc's realpath() (Arnaldo Carvalho de Melo) - Use strerror_r() in the llvm infrastructure, tread safe, its what is used elsewhere in tools/perf/ (Arnaldo Carvalho de Melo) Cleanups: - Removed misplaced or needless __maybe_unused/export (Arnaldo Carvalho de Melo) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
