- 28 Dec, 2013 6 commits
-
-
Antonio Quartulli authored
If an interface enslaved into batman-adv is a bridge (or a virtual interface built on top of a bridge) the nf_bridge member of the skbs reaching the soft-interface is filled with the state about "netfilter bridge" operations. Then, if one of such skbs is locally delivered, the nf_bridge member should be cleaned up to avoid that the old state could mess up with other "netfilter bridge" operations when entering a second bridge. This is needed because batman-adv is an encapsulation protocol. However at the moment skb->nf_bridge is not released at all leading to bogus "netfilter bridge" behaviours. Fix this by cleaning the netfilter state of the skb before it gets delivered to the upper layer in interface_rx(). Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch>
-
Antonio Quartulli authored
Make struct batadv_tvlv_tt_change a multiple 4 bytes long to avoid padding on any architecture. Signed-off-by:
-
Simon Wunderlich authored
Since this is a mac address and always 48 bit, and we can assume that it is always aligned to 2-byte boundaries, add a pack(2) pragma. Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Antonio Quartulli authored
struct batadv_icmp_header currently has a size of 17, which will be padded to 20 on some architectures. Fix this by unrolling the header into the parent structures. Moreover keep the ICMP parsing functions as generic as they are now by using a stub icmp_header struct during packet parsing. Signed-off-by:
-
Simon Wunderlich authored
The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by:
Russell King <linux@arm.linux.org.uk> Signed-off-by:
-
Simon Wunderlich authored
The compiler may decide to pad the structure, and then it does not have the expected size of 46 byte. Fix this by moving it in the pragma pack(2) part of the code. Signed-off-by:
-
- 27 Dec, 2013 7 commits
-
-
Li RongQing authored
if a dst is not attached to anywhere, it should be released before exit ipip6_tunnel_xmit, otherwise cause dst memory leakage. Fixes: 61c1db7f ("ipv6: sit: add GSO/TSO support") Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Gibson authored
netxen_process_lro() contains two bounds checks. One for the ring number against the number of rings, and one for the Rx buffer ID against the array of receive buffers. Both of these have off-by-one errors, using > instead of >=. The correct versions are used in netxen_process_rcv(), they're just wrong in netxen_process_lro(). Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
David S. Miller authored
We've seen so many instances of people invoking skb_tx_timestamp() after the device already has been given the packet, that it's worth being a little bit more verbose and explicit in this comment. Signed-off-by: -
Eric Dumazet authored
Signed-off-by:
-
Nithin Sujir authored
The current driver assumes that an skb fragment can only be upto jumbo size. Presumably this was a fast-path optimization. This assumption is no longer true as fragments can be upto 32k. v2: Remove unnecessary parantheses per Eric Dumazet. Cc: stable@vger.kernel.org Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Jamal Hadi Salim authored
This is a bug fix. The existing code tries to kill many birds with one stone: Handling binding of actions to filters, new actions and replacing of action attributes. A simple test case to illustrate: XXXX moja@fe1:~$ sudo tc actions add action drop index 12 moja@fe1:~$ actions get action gact index 12 action order 1: gact action drop random type none pass val 0 index 12 ref 1 bind 0 moja@fe1:~$ sudo tc actions replace action ok index 12 moja@fe1:~$ actions get action gact index 12 action order 1: gact action drop random type none pass val 0 index 12 ref 2 bind 0 XXXX The above shows the refcounf being wrongly incremented on replace. There are more complex scenarios with binding of actions to filters that i am leaving out that didnt work as well... Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Sasha Levin authored
Binding might result in a NULL device, which is dereferenced causing this BUG: [ 1317.260548] BUG: unable to handle kernel NULL pointer dereference at 000000000000097 4 [ 1317.261847] IP: [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.263315] PGD 418bcb067 PUD 3ceb21067 PMD 0 [ 1317.263502] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 1317.264179] Dumping ftrace buffer: [ 1317.264774] (ftrace buffer empty) [ 1317.265220] Modules linked in: [ 1317.265824] CPU: 4 PID: 836 Comm: trinity-child46 Tainted: G W 3.13.0-rc4- next-20131218-sasha-00013-g2cebb9b-dirty #4159 [ 1317.267415] task: ffff8803ddf33000 ti: ffff8803cd31a000 task.ti: ffff8803cd31a000 [ 1317.268399] RIP: 0010:[<ffffffff84225f52>] [<ffffffff84225f52>] rds_ib_laddr_check+ 0x82/0x110 [ 1317.269670] RSP: 0000:ffff8803cd31bdf8 EFLAGS: 00010246 [ 1317.270230] RAX: 0000000000000000 RBX: ffff88020b0dd388 RCX: 0000000000000000 [ 1317.270230] RDX: ffffffff8439822e RSI: 00000000000c000a RDI: 0000000000000286 [ 1317.270230] RBP: ffff8803cd31be38 R08: 0000000000000000 R09: 0000000000000000 [ 1317.270230] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [ 1317.270230] R13: 0000000054086700 R14: 0000000000a25de0 R15: 0000000000000031 [ 1317.270230] FS: 00007ff40251d700(0000) GS:ffff88022e200000(0000) knlGS:000000000000 0000 [ 1317.270230] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1317.270230] CR2: 0000000000000974 CR3: 00000003cd478000 CR4: 00000000000006e0 [ 1317.270230] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1317.270230] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 [ 1317.270230] Stack: [ 1317.270230] 0000000054086700 5408670000a25de0 5408670000000002 0000000000000000 [ 1317.270230] ffffffff84223542 00000000ea54c767 0000000000000000 ffffffff86d26160 [ 1317.270230] ffff8803cd31be68 ffffffff84223556 ffff8803cd31beb8 ffff8800c6765280 [ 1317.270230] Call Trace: [ 1317.270230] [<ffffffff84223542>] ? rds_trans_get_preferred+0x42/0xa0 [ 1317.270230] [<ffffffff84223556>] rds_trans_get_preferred+0x56/0xa0 [ 1317.270230] [<ffffffff8421c9c3>] rds_bind+0x73/0xf0 [ 1317.270230] [<ffffffff83e4ce62>] SYSC_bind+0x92/0xf0 [ 1317.270230] [<ffffffff812493f8>] ? context_tracking_user_exit+0xb8/0x1d0 [ 1317.270230] [<ffffffff8119313d>] ? trace_hardirqs_on+0xd/0x10 [ 1317.270230] [<ffffffff8107a852>] ? syscall_trace_enter+0x32/0x290 [ 1317.270230] [<ffffffff83e4cece>] SyS_bind+0xe/0x10 [ 1317.270230] [<ffffffff843a6ad0>] tracesys+0xdd/0xe2 [ 1317.270230] Code: 00 8b 45 cc 48 8d 75 d0 48 c7 45 d8 00 00 00 00 66 c7 45 d0 02 00 89 45 d4 48 89 df e8 78 49 76 ff 41 89 c4 85 c0 75 0c 48 8b 03 <80> b8 74 09 00 00 01 7 4 06 41 bc 9d ff ff ff f6 05 2a b6 c2 02 [ 1317.270230] RIP [<ffffffff84225f52>] rds_ib_laddr_check+0x82/0x110 [ 1317.270230] RSP <ffff8803cd31bdf8> [ 1317.270230] CR2: 0000000000000974 Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
- 26 Dec, 2013 1 commit
-
-
Florian Westphal authored
There are inconsistencies wrt. feature propagation/inheritance between macvlan and the underlying interface. When a feature is turned off on the real device before a macvlan is created on top, these will remain enabled on the macvlan device, whereas turning off the feature on the lower device after macvlan creation the kernel will propagate the changes to the macvlan. The second issue is that, when propagating changes from underlying device to the macvlan interface, macvlan can erronously lose its NETIF_F_LLTX flag, as features are anded with the underlying device. However, LLTX should be kept since it has no dependencies on physical hardware (LLTX is set on macvlan creation regardless of the lower device properties, see 8ffab51b (macvlan: lockless tx path). The LLTX flag is now forced regardless of user settings in absence of layer2 hw acceleration (a6cc0cfa, net: Add layer 2 hardware acceleration operations for macvlan devices). Use netdev_increment_features to rebuild the feature set on capability changes on either the lower device or on the macvlan interface. As pointed out by Ben Hutchings, use netdev_update_features on NETDEV_FEAT_CHANGE event (it calls macvlan_fix_features/netdev_features_change if needed). Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 22 Dec, 2013 13 commits
-
-
Hannes Frederic Sowa authored
We report different pmtu values back on the first write and on further writes on an corked socket. Also don't include the dst.header_len (respectively exthdrlen) as this should already be dealt with by the interface mtu of the outgoing (virtual) interface and policy of that interface should dictate if fragmentation should happen. Instead reduce the pmtu data by IP options as we do for IPv6. Make the same changes for ip_append_data, where we did not care about options or dst.header_len at all. Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Mugunthan V N authored
During checking the interrupts with "cat /proc/interrupts", it is showing device name as (null), this change was done with commit id aa1a15e2 where request_irq is changed to devm_request_irq also changing the irq name from platform device name to net device name, but the net device is not registered at this point with the network frame work, so devm_request_irq is called with device name as NULL, by which it is showed as "(null)" in "cat /proc/interrupts". So this patch changes back irq name to platform device name itself in devm_request_irq so that the device name shows as below. Previous to this patch root@am335x-evm:~# cat /proc/interrupts CPU0 28: 2265 INTC 12 edma 30: 80 INTC 14 edma_error 56: 0 INTC 40 (null) 57: 1794 INTC 41 (null) 58: 7 INTC 42 (null) 59: 0 INTC 43 (null) With this patch root@am335x-evm:~# cat /proc/interrupts CPU0 28: 213 INTC 12 edma 30: 9 INTC 14 edma_error 56: 0 INTC 40 4a100000.ethernet 57: 16097 INTC 41 4a100000.ethernet 58: 11964 INTC 42 4a100000.ethernet 59: 0 INTC 43 4a100000.ethernet Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== This patch series provides miscelleneous fixes for Chelsio T4/T5 adapters related to server entries and server filter entries. Also, fixes a bug in ULD (Upper Level Driver) like iw_cxgb4 where-in it calculates wrong tuple values on T5 adapter. So, a new API cxgb4_select_ntuple is exported so as to enable Upper Lever Drivers like iw_cxgb4 to correctly calculate tuple values. The patches series is created agains David Miller's 'net' tree. And includes patches on cxgb4 and iw_cxgb4 driver. Patch 8/8 (RDMA-cxgb4-Use-cxgb4_select_ntuple-to-correctly-calc.patch) has a build dependency on Patch 5/8 (cxgb4-Add-API-to-correctly-calculate-tuple-fields.patch). Also, Patch 6/8 (RDMA-cxgb4-Calculate-the-filter-server-TID-properly.patch) has a functional dependency on Patch 3/8 (cxgb4-Assign-filter-server-TIDs-properly.patch) We would like to request this patch series to get merged via David Miller's 'net' tree. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. V2 changes: - Removed earlier patch which added sftids_in_use counter. However, the counter was actually not used anywhere in this patch series. Thanks to David Miller for spotting this. We have dropped this patch in V2 and will submit a more complete patch which uses sftids_in_use counter later on. - Fixed a 'checkpatch.pl --strict' warning on Patch 5/8 (cxgb4-Add-API-to-correctly-calculate-tuple-fields.patch). - Removed some un-used #defines from Patch 5/8 (cxgb4-Add-API-to-correctly-calculate-tuple-fields.patch). ==================== Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com>
-
Kumar Sanghvi authored
Signed-off-by:
Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Kumar Sanghvi authored
Signed-off-by:
-
Kumar Sanghvi authored
Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
Kumar Sanghvi authored
Adds API cxgb4_select_ntuple so as to enable Upper Level Drivers to correctly calculate the tuple fields. Adds constant definitions for TP_VLAN_PRI_MAP for the Compressed Filter Tuple field widths and structures and uses them. Also, the CPL Parameters field for T5 is 40 bits so we need to prototype cxgb4_select_ntuple() to calculate and return u64 values. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Kumar Sanghvi authored
IPv6 uses 2 TIDs with CLIP enabled and 4 TIDs without CLIP. Currently we are incrementing STIDs in use by 1 for both IPv4 and IPv6 which is wrong. Further, driver currently does not have interface to query if CLIP is programmed for particular IPv6 address. So, in this patch we increment/decrement TIDs in use by 4 for IPv6 assuming absence of CLIP. Such assumption keeps us on safe side and we don't end up allocating more stids for IPv6 than actually supported. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
Kumar Sanghvi authored
The LE workaround code is incorrectly reusing the TCAM TIDs (meant for allocation by firmware in case of hash collisions) for filter servers. This patch assigns the filter server TIDs properly starting from sftid_base index. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
Kumar Sanghvi authored
We were creating LE Workaround Server Filters without specifying IPPROTO_TCP (6) in the filters (when F_PROTOCOL is set in TP_VLAN_PRI_MAP). This meant that UDP packets with matching IP Addresses/Ports would get caught up in the filter and be delivered to ULDs like iw_cxgb4. So, include the protocol information in the server filter properly. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Kumar Sanghvi authored
When creating offload server entries, an IPv6 passive connection request can trigger a reply with a null STID, whereas the driver would expect the reply 'STID to match the value used for the request. This happens due to h/w limitation on T4 and T5. This patch ensures that STID 0 is never used if the stid range starts from zero. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Please consider pulling this batch of fixes for the 3.13 stream... For the mac80211 bits, Johannes says: "Here's a fix for another potential radiotap parser buffer overrun thanks to Evan Huus, and a fix for a cfg80211 warning in a certain corner case (reconnecting to the same BSS)." For the bluetooth bits, Gustavo says: "Two patches in this pull request. An important fix from Marcel in the permission check for HCI User Channels, there was a extra check for CAP_NET_RAW, and it was now removed. These channels should only require CAP_NET_ADMIN. The other patch is a device id addition." On top of that... Sujith Manoharan provides a workaround for a hardware problem that can result in lost interrupts. Larry Finger fixes an oops when unloading the rtlwifi driver (Red Hat bug 852761). Mathy Vanhoef fixes a somewhat minor MAC address privacy issue (CVE-2013-4579). ==================== Signed-off-by: -
Haiyang Zhang authored
Moving the register_netdev to the end of probe to prevent possible open call happens before NetVSP is connected. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
- 20 Dec, 2013 5 commits
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Wang Weidong authored
Check the return value of request_module during dccp_probe initialisation, bail out if that call fails. Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
Wang Weidong <wangweidong1@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/netDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to net, ixgbe and e1000e. David provides compiler fixes for e1000e. Don provides a fix for ixgbe to resolve a compile warning. John provides a fix to net where it is useful to be able to walk all upper devices when bringing a device online where the RTNL lock is held. In this case, it is safe to walk the all_adj_list because the RTNL lock is used to protect the write side as well. This patch adds a check to see if the RTNL lock is held before throwing a warning in netdev_all_upper_get_next_dev_rcu(). ==================== Signed-off-by: -
Leigh Brown authored
This version corrects the whitespace issue. orion_mdio_wait_ready uses wait_event_timeout to wait for the SMI interrupt to fire. wait_event_timeout waits for between "timeout - 1" and "timeout" jiffies. In this case a 1ms timeout when HZ is 1000 results in a wait of 0 to 1 jiffies, causing premature timeouts. This fix ensures a minimum timeout of 2 jiffies, ensuring wait_event_timeout will always wait at least 1 jiffie. Issue reported by Nicolas Schichan. Tested-by:
Nicolas Schichan <nschichan@freebox.fr> Signed-off-by:
Leigh Brown <leigh@solinno.co.uk> Signed-off-by:
-
Betty Dall authored
The function atl1c_reset_pcie() does not check the return from pci_find_ext_cabability() where it is getting the postion of the PCI_EXT_CAP_ID_ERR. It is possible for the return to be 0. Signed-off-by:
Betty Dall <betty.dall@hp.com> Signed-off-by:
-
- 19 Dec, 2013 7 commits
-
-
Li RongQing authored
ip6_rt_copy only sets dst.from if ort has flag RTF_ADDRCONF and RTF_DEFAULT. but the prefix routes which did get installed by hand locally can have an expiration, and no any flag combination which can ensure a potential from does never expire, so we should always set the new created dst's from. This also fixes the new created dst is always expired since the ort, which is created by RA, maybe has RTF_EXPIRES and RTF_ADDRCONF, but no RTF_DEFAULT. Suggested-by:
-
Eric Dumazet authored
skb_tx_timestamp(skb) should be called _before_ TX completion has a chance to trigger, otherwise it is too late and we access freed memory. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Acked-by:
Frank Li <Frank.Li@freescale.com> Signed-off-by:
-
Michal Schmidt authored
"valid ME register value" is not an error. It should be logged for debugging only. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
-
Salva Peiró authored
The yam_ioctl() code fails to initialise the cmd field of the struct yamdrv_ioctl_cfg. Add an explicit memset(0) before filling the structure to avoid the 4-byte info leak. Signed-off-by:
Salva Peiró <speiro@ai2.upv.es> Signed-off-by:
-
Wenliang Fan authored
The local variable 'bi' comes from userspace. If userspace passed a large number to 'bi.data.calibrate', there would be an integer overflow in the following line: s->hdlctx.calibrate = bi.data.calibrate * s->par.bitrate / 16; Signed-off-by:
Wenliang Fan <fanwlexca@gmail.com> Signed-off-by:
-
Wei Yongjun authored
'err' is overwrited to 0 after maybe_pull_tail() call, so the error code was not set if skb_partial_csum_set() call failed. Fix to return error -EPROTO from those error handling case instead of 0. Fixes: d52eb0d4 ('xen-netback: make sure skb linear area covers checksum field') Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Daniel Borkmann authored
Jakub reported while working with nlmon netlink sniffer that parts of the inet_diag_sockid are not initialized when r->idiag_family != AF_INET6. That is, fields of r->id.idiag_src[1 ... 3], r->id.idiag_dst[1 ... 3]. In fact, it seems that we can leak 6 * sizeof(u32) byte of kernel [slab] memory through this. At least, in udp_dump_one(), we allocate a skb in ... rep = nlmsg_new(sizeof(struct inet_diag_msg) + ..., GFP_KERNEL); ... and then pass that to inet_sk_diag_fill() that puts the whole struct inet_diag_msg into the skb, where we only fill out r->id.idiag_src[0], r->id.idiag_dst[0] and leave the rest untouched: r->id.idiag_src[0] = inet->inet_rcv_saddr; r->id.idiag_dst[0] = inet->inet_daddr; struct inet_diag_msg embeds struct inet_diag_sockid that is correctly / fully filled out in IPv6 case, but for IPv4 not. So just zero them out by using plain memset (for this little amount of bytes it's probably not worth the extra check for idiag_family == AF_INET). Similarly, fix also other places where we fill that out. Reported-by:
Jakub Zawadzki <darkjames-ws@darkjames.pl> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
- 18 Dec, 2013 1 commit
-
-
Eric Dumazet authored
While testing my changes for TSO support in SIT devices, I was using sit0 tunnel which appears to include nopmtudisc flag. But using : ip tun add sittun mode sit remote $REMOTE_IPV4 local $LOCAL_IPV4 \ dev $IFACE We get a tunnel which rejects too long packets because of the mtu check which is not yet GSO aware. erd:~# ip tunnel sittun: ipv6/ip remote 10.246.17.84 local 10.246.17.83 ttl inherit 6rd-prefix 2002::/16 sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16 This patch is based on an excellent report from Michal Shmidt. In the future, we probably want to extend the MTU check to do the right thing for GSO packets... Fixes: ("61c1db7f ipv6: sit: add GSO/TSO support") Reported-by:
-
