- 09 Feb, 2007 40 commits
-
-
Al Viro authored
Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Acked-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Al Viro authored
Acked-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Acked-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Linus Torvalds authored
* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (212 commits) [PATCH] Fix breakage with CONFIG_SYSFS_DEPRECATED [ALSA] version 1.0.14rc2 [ALSA] ASoC documentation updates [ALSA] ca0106 - Add missing sysfs device assignment [ALSA] aoa i2sbus: Stop Apple i2s DMA gracefully [ALSA] hda-codec - Add support for Fujitsu PI1556 Realtek ALC880 [ALSA] aoa: remove suspend/resume printks [ALSA] Fix possible deadlocks in sequencer at removal of ports [ALSA] emu10k1 - Fix STAC9758 front channel [ALSA] soc - Clean up with kmemdup() [ALSA] snd-ak4114: Fix two array overflows [ALSA] ac97_bus power management [ALSA] usbaudio - Add support for Edirol UA-101 [ALSA] hda-codec - Add ALC861VD/ALC660VD support [ALSA] soc - ASoC 0.13 Sharp poodle machine [ALSA] soc - ASoC 0.13 Sharp tosa machine [ALSA] soc - ASoC 0.13 spitz machine [ALSA] soc - ASoC Sharp corgi machine [ALSA] soc - ASoC 0.13 pxa2xx DMA [ALSA] soc - ASoC 0.13 pxa2xx AC97 driver ...
-
git://www.atmel.no/~hskinnemoen/linux/kernel/avr32Linus Torvalds authored
* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32: [AVR32] Add missing #include <linux/module.h> [AVR32] ssize_t should be long, not int [AVR32] Remove last remains of libgcc [AVR32] SPI platform code update [AVR32] Add PIOE device and reserve SDRAM pins [AVR32] Introduce at32_reserve_pin() [AVR32] Don't reset PIO state at bootup [AVR32] GPIO API implementation [AVR32] Use ARRAY_SIZE macro when appropriate [AVR32] Implement dma_mapping_error() [AVR32] Fix incorrect invalidation of shared cachelines [AVR32] ext int fixes [AVR32] fix serial port setup on ATSTK1000 [AVR32] /proc/interrupts display Remove a couple final references to obsolete verify_area().
-
Nick Piggin authored
Remove find_trylock_page as per the removal schedule. Signed-off-by:
Nick Piggin <npiggin@suse.de> [ Let's see if anybody screams ] Signed-off-by:
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (79 commits) [IPX]: Fix NULL pointer dereference on ipx unload [ATM]: atmarp.h needs to always include linux/types.h [NET]: Fix net/socket.c warnings. [NET]: cleanup sock_from_file() [NET]: change layout of ehash table [S390]: Add AF_IUCV socket support [S390]: Adapt special message interface to new IUCV API [S390]: Adapt netiucv driver to new IUCV API [S390]: Adapt vmlogrdr driver to new IUCV API [S390]: Adapt monreader driver to new IUCV API [S390]: Rewrite of the IUCV base code, part 2 [S390]: Rewrite of the IUCV base code, part 1 [X.25]: Adds /proc/net/x25/forward to view active forwarded calls. [X.25]: Adds /proc/sys/net/x25/x25_forward to control forwarding. [X.25]: Add call forwarding [XFRM]: xfrm_migrate() needs exporting to modules. [PFKEYV2]: CONFIG_NET_KEY_MIGRATE option [PFKEYV2]: Extension for dynamic update of endpoint address(es) [XFRM]: CONFIG_XFRM_MIGRATE option [XFRM]: User interface for handling XFRM_MSG_MIGRATE ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: MAINTAINERS: update DMFE and wireless drivers mailing list ucc_geth: Add support to local-mac-address property ucc_geth: Remove obsolete workaround of link speed change cxgb3: sysfs attributes in -mm tree Add Attansic L1 ethernet driver.
-
Takashi Iwai authored
The fix for sysfs breakage with CONFIG_SYSFS_DEPRECATED was flown away by the conflicted merge of the ALSA git tree. The patch below fixes it again. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Haavard Skinnemoen authored
arch/avr32/kernel/cpu.c needs THIS_MODULE, so it must include linux/module.h. Signed-off-by:Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Since size_t is defined as unsigned long, ssize_t ought to be long and not int. It could have been the other way around, but gcc defines size_t as unsigned long, so this is correct. This fixes a couple of printk format warnings. Signed-off-by: -
Haavard Skinnemoen authored
Two libgcc headers were left around even though all the actual code borrowed from libgcc is gone. Delete them. Signed-off-by: -
Haavard Skinnemoen authored
Move stuff in spi.c into ATSTK1002 board code and update SPI platform device definitions according to the new GPIO API. Signed-off-by: -
Haavard Skinnemoen authored
The PIOE device was left out before because it muxes SDRAM pins (and is therefore a bit dangerous to mess with) and because no existing drivers had any use for it. It is needed for CompactFlash, however, and now that we have a way to protect the SDRAM pins, it can be safely added. Signed-off-by: -
Haavard Skinnemoen authored
at32_reserve_pin() can be used for reserving portmux pins without altering their configuration. Useful for e.g. SDRAM pins where we really don't want to change the bootloader-provided configuration. Signed-off-by: -
Haavard Skinnemoen authored
Leave the PIO lines as the bootloader left them. This allows us to use PIOE without disturbing the SDRAM muxing. Signed-off-by: -
Haavard Skinnemoen authored
Arch-neutral GPIO calls for AVR32. GPIO IRQ support written by David Brownell. Signed-off-by: -
Ahmed S. Darwish authored
A patch to use ARRAY_SIZE macro already defined in linux/kernel.h Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by:
-
Haavard Skinnemoen authored
dma_map_single() never fails, so dma_mapping_error() simply returns 0. Signed-off-by: -
David Brownell authored
Fix bug in dma_map_single(..., DMA_FROM_DEVICE) caused by incorrect invalidation of shared cachelines at the beginning and/or end of the specified buffer. Those shared cachelines need to be flushed, since they may hold valid data (which must not be discarded). Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Bugfixes for external irq handler set_irq_type(): - If set_irq_type() can't set the type, don't change anything! - It's not OK to change the flow handler as part of set_irq_type(), among other issues that violates spinlock rules. Instead, we can call the relevant handler when we demux the external interrupts. - The external irq demux has no need to grab the spinlock. And in fact grabbing it that way was wrong, since that code might be pre-empted by an irq at a different priority level, and that code might then have tried to grab that spinlock... Signed-off-by:
-
David Brownell authored
Fixes to USART setup on the stk-1000 ... don't configure USART 2, since its TXD/RXD are used for INT-A and INT-B buttons; and configure USART 0 (for IRDA, and with corrected IRQ) iff SW2 has a non-default setting. Signed-off-by:
-
David Brownell authored
The /proc/interrupts file should also display the irq_chip associated with each irq ... e.g. INTC, EIM, GPIO. Signed-off-by:
-
Robert P. J. Day authored
Remove a couple final references to the obsolete verify_area() call, which was long ago replaced by access_ok(). Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Jaroslav Kysela authored
Signed-off-by: -
Liam Girdwood authored
This patch updates the documentation for ASoC to reflect the recent changes in API between 0.12.x and 0.13.x Changes:- o Removed all reference to old API's. o Removed references and examples of automatic DAI config and matching. o Fixed 80 char line length on some files. Signed-off-by:
Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
-
Takashi Iwai authored
Added the missing device assignment before creating sysfs tree. This caused the insufficient device permissions. Signed-off-by:
-
Paul Mackerras authored
This fixes the problem of getting extra bytes inserted at the beginning of a recording when using the Apple i2s interface and DBDMA controller. It turns out that we can't just abort the DMA; we have to let it stop at the end of a command, and then wait for the S7 bit to be set before turning off the DBDMA controller. Doing that for playback doesn't seem to be necessary, but doesn't hurt either. We use the technique used by the Darwin driver: make each transfer command branch to a stop command if the S0 status bit is set. Thus we can ask the DMA controller to stop at the end of the current command by setting S0. The interrupt routine now looks at and clears the status word of the DBDMA command ring. This is necessary so it can know when the DBDMA controller has seen that S0 is set, and so when it should look for the DBDMA controller being stopped and S7 being set. This also ended up simplifying the calculation in i2sbus_pcm_pointer. Tested on a 15 inch albook. [Addition by Johannes] I modified this patch and added the suspend/resume bits to it to get my powermac into a decent state when playing sound across suspend to disk that has a different bitrate from what the firmware programs the hardware to. I also added the SNDRV_PCM_INFO_JOINT_DUPLEX flag because it seemed the right thing to do and I was looking at the info stuff. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Tobin Davis authored
This patch adds support for the Fujitsu PI1556 laptop. Issue: Volume knob on system maxes out lower than alsamixer (0x35 vs 0x40). Everything else works, and audio quality is good at 0x35. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Johannes Berg authored
This just removes two useless printks. Signed-off-by:
-
Takashi Iwai authored
Fix possible rwsem deadlocks in sequencer code at removal of sequencer ports. The list_lock of port group can be double locked. Signed-off-by:
-
Rolf Stefan Wilke authored
For some time now, some users of STAC9758 (emu10k1) would have no sound on their front channels. This can be fixed (at least for me) by unmuting head phone volume and setting it to 0dB before removing the 'Front Playback' control. For details, cf. https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2308 Find the appropriate patch attached. Credits to: Raymond Signed-off-by:
Rolf Stefan Wilke <stefan.wilke@uni-ulm.de> Signed-off-by:
-
Takashi Iwai authored
Clean up by replacing with kmemdup(). Signed-off-by:
-
