- 14 Jun, 2019 40 commits
-
-
Paolo Abeni authored
We can avoid another indirect call per packet wrapping the rx handler call with the proper helper. To ensure that even the last listed direct call experience measurable gain, despite the additional conditionals we must traverse before reaching it, I tested reversing the order of the listed options, with performance differences below noise level. Together with the previous indirect call patch, this gives ~6% performance improvement in raw UDP tput. v2 -> v3: - use only the direct calls always available regardless of the mlx5 build options - drop the direct call list macro, to keep the code as simple as possible for future rework v1 -> v2: - update the direct call list and use a macro to define it, as per Saeed suggestion. An intermediated additional macro is needed to allow arg list expansion Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
We can avoid an indirect call per packet wrapping the skb creation with the appropriate helper. Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2019-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Many changes all over: * HE (802.11ax) work continues * WPA3 offloads * work on extended key ID handling continues * fixes to honour AP supported rates with auth/assoc frames * nl80211 netlink policy improvements to fix some issues with strict validation on new commands with old attrs ==================== Signed-off-by:
-
Kevin Darbyshire-Bryant authored
Use extack error reporting mechanism in addition to returning -EINVAL NL_SET_ERR_* code shamelessy copy/paste/adjusted from act_pedit & sch_cake and used as reference as to what I should have done in the first place. Signed-off-by:
Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, there is no need to store the individual debugfs file name, just remove the whole directory all at once, saving a local variable. Cc: "David S. Miller" <davem@davemloft.net> Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: netdev@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: add and use helper rtl_is_8168evl_up Few registers have been added or changed its purpose with version RTL8168e-vl, so create a helper for identifying chip versions from RTL8168e-vl. ==================== Signed-off-by: -
Heiner Kallweit authored
>From RTL8168e-vl the value in register MaxTxPacketSize is interpreted differently, therefore use new helper rtl_is_8168evl_up to set this register. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Add helper rtl_is_8168evl_up to make the code better readable and to simplify it. Signed-off-by:
-
James Prestwood authored
When the offchannel TX wait time expires, send the appropriate event. Signed-off-by:
James Prestwood <james.prestwood@linux.intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
James Prestwood authored
cfg80211_remain_on_channel_expired is used to notify userspace when the remain on channel duration expired by sending an event. There is no such equivalent to CMD_FRAME, where if offchannel and a duration is provided, the card will go offchannel for that duration. Currently there is no way for userspace to tell when that duration expired apart from setting an independent timeout. This timeout is quite erroneous as the kernel may not immediately send out the frame because of scheduling or work queue delays. In testing, it was found this timeout had to be quite large to accomidate any potential delays. A better solution is to have the kernel send an event when this duration has expired. There is already NL80211_CMD_FRAME_WAIT_CANCEL which can be used to cancel a NL80211_CMD_FRAME offchannel. Using this command matches perfectly to how NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL works, where its both used to cancel and notify if the duration has expired. Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Johannes Berg authored
This appears to happen occasionally, and if it does we really want even more information than we have now. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
If HW advertises it has rate control, we skip all of the rate control assignments, but sometimes the data we have here is useful, especially so that we don't have to do the lookups again on which rates are configured and are supported. So do the low rate assignment anyway to help out drivers that might need it. Signed-off-by:
-
Johannes Berg authored
Even if we have a station, we currently call rate_control_send_low() with the NULL station unless further rate control (driver, minstrel) has been initialized. Change this so we can use more information about the station to use a better rate. For example, when we associate with an AP, we will now use the lowest rate it advertised as supported (that we can) rather than the lowest mandatory rate. This aligns our behaviour with most other 802.11 implementations. To make this possible, we need to also ensure that we have non-zero rates at all times, so in case we really have *nothing* pre-fill the supp_rates bitmap with the very lowest mandatory bitmap (11b and 11a on 2.4 and 5 GHz respectively). Additionally, hostapd appears to be giving us an empty supported rates bitmap (it can and should do better, since the STA must have supported for at least the basic rates in the BSS), so ignore any such bitmaps that would actually zero out the supp_rates, and in that case just keep the pre-filled mandatory rates. Signed-off-by:
-
Johannes Berg authored
There's no rate control algorithm that *doesn't* want to call it internally, and calling it internally will let us modify its behaviour in the future. Signed-off-by: -
Ilan Peer authored
Add the "OBSS Narrow Bandwidth RU In OFDMA Tolerance Support" flag definition to the definitions of the flags covered by the Extended Capability IE. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
-
Ilan Peer authored
Add a function that iterates over the BSS entries associated with a given wiphy and calls a callback for each iterated BSS. This can be used by drivers in various ways, e.g., to evaluate some property for all the BSSs in the medium. Signed-off-by:
-
John Crispin authored
Allow the userland daemon to en/disable TWT support for an AP. Signed-off-by:
Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by:
John Crispin <john@phrozen.org> [simplify parsing code] Signed-off-by:
-
John Crispin authored
Turn TWT for STA interfaces when they associate and/or receive a beacon where the twt_responder bit has changed. Signed-off-by:
-
Johannes Berg authored
Require that each vendor command give a policy of its sub-attributes in NL80211_ATTR_VENDOR_DATA, and then (stricly) check the contents, including the NLA_F_NESTED flag that we couldn't check on the outer layer because there we don't know yet. It is possible to use VENDOR_CMD_RAW_DATA for raw data, but then no nested data can be given (NLA_F_NESTED flag must be clear) and the data is just passed as is to the command. Signed-off-by: -
John Crispin authored
This function is similar to ieee80211_get_he_sta_cap() but allows passing the iftype. Also make ieee80211_get_he_sta_cap() use the new helper rather than duplicating the code. Signed-off-by:
-
Chung-Hsien Hsu authored
Let drivers advertise support for station-mode SAE authentication offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag. Signed-off-by:
Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by:
Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by:
-
Chung-Hsien Hsu authored
Add definition of WPA version 3 for SAE authentication. Signed-off-by:
-
Chung-Hsien Hsu authored
Add NL80211_ATTR_IFINDEX attribute to port authorized event to indicate the operating interface of the device. Also put NL80211_ATTR_WIPHY attribute in it to be consistent with the other MLME notifications. Signed-off-by:
-
Alexander Wetzel authored
IEEE 802.11 - 2016 forbids mixing MPDUs with different keyIDs in one A-MPDU. Drivers supporting A-MPDUs and Extended Key ID must actively enforce that requirement due to the available two unicast keyIDs. Allow driver to signal mac80211 that they will not check the keyID in MPDUs when aggregating them and that they expect mac80211 to stop Tx aggregation when rekeying a connection using Extended Key ID. Signed-off-by:
Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by:
-
Heiner Kallweit authored
tp->coalesce_info is used in rtl_coalesce_info() only, so we can remove this member. In addition replace phy_ethtool_get_link_ksettings with a direct access to tp->phydev->speed. Signed-off-by:
-
Heiner Kallweit authored
In case of a timeout currently ~0 is returned. Callers often just check whether a certain bit is set and therefore may behave incorrectly. So let's return -ETIMEDOUT in case of a timeout. r8168_phy_ocp_read is used in r8168g_mdio_read only, therefore we can apply the same change. Signed-off-by:
-
Vladimir Oltean authored
The packing facility is needed to decode Ethernet meta frames containing source port and RX timestamping information. The DSA driver selects CONFIG_PACKING, but the tagger did not, and since taggers can be now compiled as modules independently from the drivers themselves, this is an issue now, as CONFIG_PACKING is disabled by default on all architectures. Fixes: e53e18a6 ("net: dsa: sja1105: Receive and decode meta frames") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by:
-
Robert Hancock authored
We were accessing the pointer returned from platform_get_resource before checking if it was valid, causing an oops if it was not. Move this access after the call to devm_ioremap_resource which does the validity check. Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-06-11 please apply the following patch series for qeth to net-next. This brings all sorts of cleanups and minor improvements, primarily for the control IO path. ==================== Signed-off-by: -
Julian Wiedmann authored
We statically allocate 8 cmd buffers on the read channel, when the only IO left that's still using them is the long-running READ. Replace this with a single allocated cmd, that gets restarted whenever the READ completed. This introduces refcounting for allocated cmds, so that the READ cmd can survive the IO completion. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
The current IDX sequence first sends one WRITE cmd to activate the device, and then sends a second cmd that READs the response. Using qeth_alloc_cmd(), we can combine this into a single IO with two command-chained CCWs. Signed-off-by:
-
Julian Wiedmann authored
The RCD code is the last remaining IO path that doesn't use the qeth_send_control_data() infrastructure. Doing so allows us to remove all sorts of custom state machinery and logic in the IRQ handler. Instead of introducing statically allocated cmd buffers for this single IO on the data channel, use the new qeth_alloc_cmd() helper. Signed-off-by:
-
Julian Wiedmann authored
qeth currently uses a fixed set of statically allocated cmd buffers for the read and write IO channels. This (1) doesn't play well with the single RCD cmd we need to issue on the data channel, (2) doesn't provide the necessary flexibility for certain IDX improvements, and (3) is also rather wasteful since the buffers are idle most of the time. Add a new type of cmd buffer that is dynamically allocated, and keeps its ccw chain in the DMA data area. Since this touches most callers of qeth_setup_ccw(), also add a new CCW flags parameter for future usage. Signed-off-by:
-
Julian Wiedmann authored
Each cmd buffer maintains a pointer to the IO channel that it was/will be issued on. So when dealing with cmd buffers, we don't need to pass around a separate channel pointer. Signed-off-by:
-
Julian Wiedmann authored
The vast majority of SETUP-classified trace entries can be moved to their device-specific trace file. This reduces pollution of the global SETUP file, and provides a consistent trace view of all activity on the device. Signed-off-by:
-
Julian Wiedmann authored
OSN currently provides a custom code path to submit IPA cmds, without waiting for the cmd response. Replace it with qeth_send_ipa_cmd(), which uses the common qeth_send_control_data() IO infrastructure. By setting a custom iob->callback, we can now provide feedback to the caller about whether the cmd has been successfully submitted to HW. Since the callback then immediately wakes up the reply-waiter object, we maintain the old behaviour of returning early without waiting for the response. Signed-off-by:
-
Julian Wiedmann authored
The basic MPC initialization sequence is strictly sequential, and waiting for an available cmd buffer should never be necessary. So this change only affects the OSN path, where dangling waiters on an unbounded wait_event() are not desirable. Switch to qeth_get_buffers(), and let OSN callers deal with -ENOMEM. Signed-off-by:
-
Julian Wiedmann authored
When called from qeth_core_probe_device(), qeth_determine_capabilities() initializes the device's BLKT defaults. From all other callers, the ccw_device has already been set online and the BLKT setting is skipped. Clean this up by extracting the BLKT setting into a separate helper that gets called from the right place. Signed-off-by:
-
Julian Wiedmann authored
The completion of a pending READ cmd is processed via qeth_issue_next_read_cb(). Let this callback also start the next READ cmd, instead of hardcoding that step into the IRQ handler. While at it remove the check of the channel state, __qeth_issue_next_read() already does this. Signed-off-by:
-
