The backlight enable code now has the smarts to do the right thing. Only
do backlight register save/restore in UMS.

Some VLV specific code gets dropped as UMS is not supported on VLV.

v2: Move save/restore to UMS instead of removing completely (Daniel).
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

No longer needed. We now have fully cached max backlight values.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The quirk was added as what I'd say was a stopgap measure in

commit e85843be
Author: Kamal Mostafa <kamal@canonical.com>
Date:   Fri Jul 19 15:02:01 2013 -0700

    drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight

without really digging into what was going on.

Also, as mentioned in the related bug [1], having the quirk regressed
some of the machines it was supposed to fix to begin with, and there
were patches posted to disable the quirk on such machines [2]!

The fact is, we do need the BLM_PCH_PWM_ENABLE bit set to have
backlight. With the quirk, we've relied on BIOS to have set it, and our
save/restore code to retain it. With the full backlight setup at enable,
we have no place for things that rely on previous state.

With the per platform hooks, we've also made a change in the PCH
platform enable order: setting the backlight duty cycle between CPU and
PCH PWM enable. Some experimenting and

commit 770c1231
Author: Takashi Iwai <tiwai@suse.de>
Date:   Sat Aug 11 08:56:42 2012 +0200

    drm/i915: Fix blank panel at reopening lid

indicate that we can't set the backlight before enabling CPU PWM; the
value just won't stick. But AFAICT we should do it before enabling the
PCH PWM.

Finally, any fallout we should fix properly, preferrably without quirks,
and absolutely without quirks that rely on existing state. With the per
platform hooks have much more flexibility to adjust the sequence as
required by platforms.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=47941
[2] http://lkml.kernel.org/r/1378229848-29113-1-git-send-email-kamal@canonical.comSigned-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We should now have all the information we need to do a full
initialization of the backlight registers.

v2: Keep QUIRK_NO_PCH_PWM_ENABLE for now (Imre).
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Prepare for being able to use the information at enable.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We now have the max backlight value cached. Use it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

This allows more flexibility in the ordering of the register writes, and
lets us drop level setting altogether as necessary on a per platform
basis.

For gen2-gen3, this is the only thing that happens in enable/disable.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

It has per pipe registers.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Citing Jani's response to Imre's question in the review discussion:

> According to the gen2/3 bspec I have, the correct mask is
> BACKLIGHT_DUTY_CYCLE_MASK_PNV only in case of IS_PINEVIEW(dev), for
> everything else it's BACKLIGHT_DUTY_CYCLE_MASK.

What you say is correct, but we've treated all gen2/3 similar to PNV
since

commit ca88479c
Author: Keith Packard <keithp@keithp.com>
Date:   Fri Nov 18 11:09:24 2011 -0800

    drm/i915: Treat pre-gen4 backlight duty cycle value consistently

i.e. we only use the high 15 bits for all gen2/3. For non-PNV this just
means the lowest bit is always zero. For PNV the lowest bit has a
different meaning in both the PWM freq and duty cycle fields.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Make the commit message less empty.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The backlight code has grown rather hairy, not least because the
hardware registers and bits have repeatedly been shuffled around. And
this isn't expected to get any easier with new hardware. Make things
easier for our (read: my) poor brains, and split the code up into chip
specific functions.

There should be no functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

ALthough usually there's only one connector that supports backlight,
this also finds the correct connector. Before, we only updated the
connector on pipe A, which might not be the one with backlight. (This
only made a difference on BYT.)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Move from dev_priv to connector->panel. We still don't allow multiple
sysfs interfaces, though.

There should be no functional changes, except for a slight reordering of
connector backlight and sysfs destroy calls. (This change happens now
that the backlight device is actually per-connector, even though the
destroy calls became per-connector earlier.)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

I've always felt the backlight device conditional build has been all
backwards. Make it feel right.

Gently move things towards connector based stuff while at it.

There should be no functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

SDVO support for minnowboard

* 'gma500-next' of git://github.com/patjak/drm-gma500:
  drm/gma500/mrst: Add SDVO to output init
  drm/gma500/mrst: Don't blindly guess a mode for LVDS
  drm/gma500/mrst: Setup GMBUS for oaktrail/mrst
  drm/gma500/mrst: Replace WMs and chickenbits with values from EMGD
  drm/gma500/mrst: Add aux register writes to SDVO
  drm/gma500/mrst: Properly route oaktrail hdmi hooks
  drm/gma500/mrst: Add aux register writes when programming pipe
  drm/gma500/mrst: Add SDVO clock calculation
  drm/gma500: Add aux device support for gmbus
  drm/gma500: Add support for aux pci vdc device
  drm/gma500: Add chip specific sdvo masks
  drm/gma500: Add Minnowboard to the IS_MRST() macro

Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and
clk_disable_unprepare() to get ready for the migration to the common
clock framework.

Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

So here's the Broadwell pull request. From a kernel driver pov there's
two areas with big changes in Broadwell:
- Completely new enumerated interrupt bits. On the plus side it now looks
  fairly unform and sane.
- Completely new pagetable layout.

To ensure minimal impact on existing platforms we've refactored both the
irq and low-level gtt handling code a lot in anticipation of the bdw push.
So now bdw enabling in these areas just plugs in a bunch of vfuncs.

Otherwise it's all fairly harmless adjusting of switch cases and
if-ladders to shovel bdw into the right blocks. So minimized impact on
existing platforms. I've also merged the bdw-stage1 branch into our
-nightly integration branch for the past week to make sure we don't break
anything.

Note that there's still quite a flurry or patches floating around, but
I've figured I'll push this out. I plan to keep the bdw fixes separate
from my usual -fixes stream so that you can reject them easily in case it
still looks like too much churn. Also, bdw is for now hidden behind the
preliminary hw enabling module option. So there's no real pressure to get
follow-up patches all into 3.13.

* tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits)
  drm/i915: Mask the vblank interrupt on bdw by default
  drm/i915: Wire up cpu fifo underrun reporting support for bdw
  drm/i915: Optimize gen8_enable|disable_vblank functions
  drm/i915: Wire up pipe CRC support for bdw
  drm/i915: Wire up PCH interrupts for bdw
  drm/i915: Wire up port A aux channel
  drm/i915: Fix up the bdw pipe interrupt enable lists
  drm/i915: Optimize pipe irq handling on bdw
  drm/i915/bdw: Take render error interrupt out of the mask
  drm/i915/bdw: Add BDW PCH check first
  drm/i915: Use hsw_crt_get_config on BDW
  drm/i915/bdw: Change dp aux timeout to 600us on DDIA
  drm/i915/bdw: Enable trickle feed on Broadwell
  drm/i915/bdw: WaSingleSubspanDispatchOnAALinesAndPoints
  drm/i915/bdw: conservative SBE VUE cache mode
  drm/i915/bdw: Limit SDE poly depth FIFO to 2
  drm/i915/bdw: Sampler power bypass disable
  ddrm/i915/bdw: Disable centroid pixel perf optimization
  drm/i915/bdw: BWGTLB clock gate disable
  drm/i915/bdw: Implement edp PSR workarounds
  ...

A few more patches for 3.13.  The big one here is Hawaii support.
I wanted to get that out sooner, but was sick earlier this week.  That
said, it's mostly self contained, so it shouldn't impact other asics.
The rest are just bug fixes and a merge fix.

* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  Revert "drm/radeon/audio: don't set speaker allocation on DCE4+"
  drm/radeon/audio: improve ACR calculation
  drm/radeon/audio: correct ACR table
  drm/radeon: fix mismerge of drm-next with 3.12
  drm/radeon: add pci ids for hawaii
  drm/radeon: fill in radeon_asic_init for hawaii
  drm/radeon: modesetting updates for hawaii
  drm/radeon: atombios.h updates for hawaii
  drm/radeon: update cik_get_csb_buffer for hawaii
  drm/radeon: add hawaii dpm support
  drm/radeon/cik: add hawaii UVD support
  drm/radeon: update firmware loading for hawaii
  drm/radeon: update rb setup for hawaii
  drm/radeon: add golden register settings for hawaii
  drm/radeon: update cik_tiling_mode_table_init() for hawaii
  drm/radeon: minor updates to cik.c for hawaii
  drm/radeon: update cik_gpu_init() for hawaii
  drm/radeon: add Hawaii chip family
  drm/radeon: fix-up some float to fixed conversion thinkos
  drm/radeon: use HDP_MEM_COHERENCY_FLUSH_CNTL for sdma as well
  ...

prime support, inactive rework, render nodes
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm/mdp4: page_flip cleanups/fixes
  drm/msm: EBUSY status handling in msm_gem_fault()
  drm/msm: rework inactive-work
  drm/msm: add plane support
  drm/msm: resync generated headers
  drm/msm: support render nodes
  drm/msm: prime support

This uses the proper div macro.
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit 555b1b65.

Let's try this again for 3.13.  It's required for proper
interaction with alsa.  Was disabled previously in 3.12
to be on the safe side since it caused problems on older
asics.

In order to have any realistic chance of calculating proper
ACR values, we need to be able to calculate both N and CTS,
not just CTS. We still aim for the ideal N as specified in
the HDMI spec though.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The values were taken from the HDMI spec, but they assumed
exact x/1.001 clocks. Since we round the clocks, we also need
to calculate different N and CTS values.

Note that the N for 25.2/1.001 MHz at 44.1 kHz audio is out of
spec. Hopefully this mode is rarely used and/or HDMI sinks
tolerate overly large values of N.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Audio is enabled by default now.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This adds the pci ids for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fill in gpu details for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Uses the same code as bonaire.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This updates atombios.h with the latest changes
required for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Set the PA_SC_RASTER_CONFIG[_1] registers for hawaii.
The rest is the same as the other asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This updates the CI dpm (dynamic power management)
support for hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Has same version of UVD as other CIK parts.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This just updates the firmware loading functions
to look for the appropriate firmware files for
hawaii.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The formula needs to be adjusted since there are 4 RBs
per SH rather than 2 as on previous asics.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The golden register settings are optimal settings for
certain registers from the hardware team.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Hawaii uses a different tiling configuration.  Add support
for it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Skip programming a register that was removed and
adjust the mask of the VM client status.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This adds the hawaii asic specific configuration
details.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Hawaii is a new CI-based dGPU.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Spotted by Brad Smith when porting to OpenBSD.
Noticed-by: Brad Smith <brad@comstyle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The new HDP flush method doesn't seem to work reliably on
sDMA either, so use the old method here too.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>