- 13 Jan, 2011 40 commits
-
-
Jesper Juhl authored
A call to va_start() must always be followed by a call to va_end() in the same function. In fs/reiserfs/prints.c::print_block() this is not always the case. If 'bh' is NULL we'll return without calling va_end(). One could add a call to va_end() before the 'return' statement, but it's nicer to just move the call to va_start() after the test for 'bh' being NULL. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Edward Shishkin <edward.shishkin@gmail.com> Cc: Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jesper Juhl authored
'struct befs_disk_data_stream' is huge (~144 bytes) and it's being passed by value in fs/befs/endian.h::cpu_to_fsrun(). It would be better to pass a pointer. Signed-off-by:
-
Andrew Morton authored
CC drivers/telephony/ixj.o drivers/telephony/ixj.c:287: warning: \u2018ixj_pci_tbl\u2019 defined but not used Reported-by:
Namhyung Kim <namhyung@gmail.com> Signed-off-by:
-
Davide Libenzi authored
Send the events the wakeup refers to, so that epoll, and even the new poll code in fs/select.c can avoid wakeups if the events do not match the requested set. Signed-off-by:
Davide Libenzi <davidel@xmailserver.org> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wolfram Sang authored
Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Signed-off-by:
-
Wolfram Sang authored
Because GPIOs can have crucial functions especially in embedded systems, we are better safe than sorry regarding their configuration. For gpio_request, the documentation is simply enforced: <quote>"The return value of gpio_request() must be checked."</quote> For gpio_direction_* and gpio_request_*, we now act accordingly. Signed-off-by:
-
Tomoya MORINAGA authored
ML7213 is a companion chip for Intel Atom E6xx series. This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. Signed-off-by:
Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Marc Zyngier <maz@misterjones.org> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Randy Dunlap authored
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_VX855 && GPIOLIB) selects MFD_VX855 which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by:
-
Randy Dunlap authored
Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_RDC321X && PCI && GPIOLIB) selects MFD_RDC321X which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Lennert Buytenhek <buytenh@secretlab.ca> Cc: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Rohit Vaswani <rvaswani@codeaurora.org> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
-
Lennert Buytenhek authored
Converts irq_chips and flow handlers over to the new struct irq_data based irq_chip functions. Signed-off-by:
"Hennerich, Michael" <Michael.Hennerich@analog.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Andres Salomon authored
The newer drivers/gpio/cs5535-gpio.c replaces drivers/misc/cs5535_gpio.c. The new driver has been in the tree for a little while, and has received some testing; it's time to mark the old one as deprecated. I'm thinking removal around 2.6.40 would be good, provided we're not missing critical functionality in the newer driver. Signed-off-by:
Andres Salomon <dilinger@queued.net> Cc: Daniel Drake <dsd@laptop.org> Acked-by:
Ben Gardner <bgardner@wabtec.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Andres Salomon authored
Drop the old geode_gpio crud, as well as the raw outl() calls; instead, use the Linux GPIO API where possible, and the cs5535_gpio API in other places. Note that we don't actually clean up the driver properly yet (once loaded, it always remains loaded). That'll come later.. This patch is necessary for building the driver. Signed-off-by:
-
Andres Salomon authored
This adds (well, re-adds actually) handling for events/IRQs through cs5535 GPIOs. In the wild and wooly world of CS5535, setup_event() is for assigning an IRQ to a GPIO filter/event pair, and set_irq() sets up the pair to trigger IRQs. These should really only be used in highly platform-specific drivers (such as OLPC's DCON driver). Sadly, because set_irq() uses MSRs, this causes the driver to become X86-specific. Signed-off-by:
Daniel Drake <dsd@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Axel Lin authored
Current implementation does not set driver data in max6902_probe(), thus calling platform_get_drvdata(spi) in max6902_remove() returns NULL. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Paul Gortmaker authored
People stumble across the entry for the legacy PC specific RTC driver entry in MAINTAINERS when they really want the multi-arch, multi-driver RTC subsystem. So just delete the old entry that is causing the confusion. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Paul Fox authored
rtc-cmos was setting suspend/resume hooks at the device_driver level. However, the platform bus code (drivers/base/platform.c) only looks for resume hooks at the dev_pm_ops level, or within the platform_driver. Switch rtc_cmos to use dev_pm_ops so that suspend/resume code is executed again. Paul said: : The user visible symptom in our (XO laptop) case was that rtcwake would : fail to wake the laptop. The RTC alarm would expire, but the wakeup : wasn't unmasked. : : As for severity, the impact may have been reduced because if I recall : correctly, the bug only affected platforms with CONFIG_PNP disabled. Signed-off-by:
Paul Fox <pgf@laptop.org> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: <stable@kernel.org> [2.6.37.x] Signed-off-by:
-
Axel Lin authored
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Also add a missing iounmap() in omap_rtc_remove(). Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Signed-off-by:
-
Yannick Heneault authored
It seems there is a small problem of VGA palette corruption on EFI machine. When the kernel initializes the architecture, it checks if the machine is a EFI machine and assumes that a VGA console can exist. When it initializes the console in vgacon_startup it checks if it can really use the VGA console. I think this is where a check is missing. Currently, the function can fail if a VESA boot mode is detected but not if a EFI boot mode was used. Thus vgacon_startup() doesn't fail and initialize the video card for a real VGA mode. This function changes the first 16entries of the VGA palette. When the efifb driver kicks in, the palette is not restored to default ramp value, thus the 16 first entry remain in a modified state. The following patch prevent this corruption. Signed-off-by:
Yannick Heneault <yheneaul@matrox.com> Cc: Dave Airlie <airlied@linux.ie> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Mikael Pettersson authored
This cleans up a few bits in binfmt_elf.c and binfmts.h: - the hasvdso field in struct linux_binfmt is unused, so remove it and the only initialization of it - the elf_map CPP symbol is not defined anywhere in the kernel, so remove an unnecessary #ifndef elf_map - reduce excessive indentation in elf_format's initializer - add missing spaces, remove extraneous spaces No functional changes, but tested on x86 (32 and 64 bit), powerpc (32 and 64 bit), sparc64, arm, and alpha. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Signed-off-by:
-
Robin Holt authored
On a 16TB machine, max_user_watches has an integer overflow. Convert it to use a long and handle the associated fallout. Signed-off-by:
Robin Holt <holt@sgi.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
Vasiliy Kulikov authored
On some architectures __kernel_suseconds_t is int. On these archs struct timeval has padding bytes at the end. This struct is copied to userspace with these padding bytes uninitialized. This leads to leaking of contents of kernel stack memory. This bug was added with v2.6.27-rc5-286-gb773ad40. [akpm@linux-foundation.org: avoid the memset on architectures which don't need it] Signed-off-by:
Vasiliy Kulikov <segooon@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Joe Perches authored
There's a __packed #define for __attribute__((packed)). Add a checkpatch to tell people about it. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Dave Jones authored
Exporting world writable sysfs/debugfs files is usually a bad thing. Warn about it. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Florian Mickler authored
We should only claim that something is a cast if we did not encouter a token before, that did set av_pending. This fixes the operator * in the line below to be detected as binary (vs unary). kmalloc(sizeof(struct alphatrack_ocmd) * true_size, GFP_KERNEL); Reported-by:
Audun Hoem <audun.hoem@gmail.com> Signed-off-by:
Florian Mickler <florian@mickler.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
David Rientjes authored
Alex said: I want to use flex_array to store a sparse array of ATM cell re-assembly buffers for my ATM over Ethernet driver. Using the per-vcc user_back structure causes problems when stacked with things like br2684. Add EXPORT_SYMBOL() for all publically accessible flex array functions and move to obj-y so that modules may use this library. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Reported-by:
Alex Bennee <kernel-hacker@bennee.com> Signed-off-by:
-
Stelian Pop authored
This driver is PPC only, and I am no longer able to test it. Signed-off-by:
Stelian Pop <stelian@popies.net> Cc: Michael Hanselmann <linux-kernel@hansmi.ch> Signed-off-by:
-
Stelian Pop authored
I don't even remember when it was that I sold this laptop, but it has been a few years... Signed-off-by:
-
Stelian Pop authored
Signed-off-by:
-
Lennert Buytenhek authored
Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Joe Perches authored
On Fri, 2010-11-05 at 13:50 -0700, Andrew Morton wrote: > z:/usr/src/git26> perl scripts/get_maintainer.pl -file mm/mempolicy.c > linux-mm@kvack.org > linux-kernel@vger.kernel.org Turns out this is an arguable defect in the script. The MAINTAINERS entry for mm is: MEMORY MANAGEMENT L: linux-mm@kvack.org W: http://www.linux-mm.org S: Maintained F: include/linux/mm.h F: mm/ There's a maintainer entry, but no named individual, so the script doesn't use git history via --git-fallback. This is also a defect for MAINTAINERS with status entries marked "Orphan" or "Odd fixes". The script now checks a section for any "M:" entry and that an "S:" entry is supported or maintained. If both those conditions are not satisified, use --git-fallback as appropriate. Signed-off-by:
-
