[ Upstream commit 569a933b ]

Naresh reported an issue with the non-atomic memory allocation of
cgroup local storage buffers:

[   73.047526] BUG: sleeping function called from invalid context at
/srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/mm/slab.h:421
[   73.060915] in_atomic(): 1, irqs_disabled(): 0, pid: 3157, name: test_cgroup_sto
[   73.068342] INFO: lockdep is turned off.
[   73.072293] CPU: 2 PID: 3157 Comm: test_cgroup_sto Not tainted
4.20.0-rc2-next-20181113 #1
[   73.080548] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS
2.0b 07/27/2017
[   73.088018] Call Trace:
[   73.090463]  dump_stack+0x70/0xa5
[   73.093783]  ___might_sleep+0x152/0x240
[   73.097619]  __might_sleep+0x4a/0x80
[   73.101191]  __kmalloc_node+0x1cf/0x2f0
[   73.105031]  ? cgroup_storage_update_elem+0x46/0x90
[   73.109909]  cgroup_storage_update_elem+0x46/0x90

cgroup_storage_update_elem() (as well as other update map update
callbacks) is called with disabled preemption, so GFP_ATOMIC
allocation should be used: e.g. alloc_htab_elem() in hashtab.c.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 243cfe3f ]

Fix macros for tacometer fault reading.
This fix is relevant for three Mellanox systems MQMB7, MSN37, MSN34,
which are about to be released to the customers.
At the moment, none of them is at customers sites.

Fixes: 65afb4c8 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 91b9deef ]

I've been wondering still about omap2-mcspi related suspend and resume
flakeyness and looks like we're missing calls to spi_master_suspend()
and spi_master_resume(). Adding those and using pm_runtime_force_suspend()
and pm_runtime_force_resume() makes things work for suspend and resume
and allows us to stop using noirq suspend and resume.

And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things
further.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 882eab6c ]

Audio map are possible in wrong state before card->instantiated has
been set to true.  Imaging the following examples:

time 1: at the beginning

  in:-1    in:-1    in:-1    in:-1
 out:-1   out:-1   out:-1   out:-1
 SIGGEN        A        B      Spk

time 2: after someone called snd_soc_dapm_new_widgets()
(e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c)

   in:1     in:0     in:0     in:0
  out:0    out:0    out:0    out:1
 SIGGEN        A        B      Spk

time 3: routes added

   in:1     in:0     in:0     in:0
  out:0    out:0    out:0    out:1
 SIGGEN -----> A -----> B ---> Spk

In the end, the path should be powered on but it did not.  At time 3,
"in" of SIGGEN and "out" of Spk did not propagate to their neighbors
because snd_soc_dapm_add_path() will not invalidate the paths if
the card has not instantiated (i.e. card->instantiated is false).
To correct the state of audio map, recalculate the whole map forcely.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 76836fd3 ]

The machine driver fails to probe in next-20181113 with:

[    2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered
[    2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517
...
[    3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040
[    3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040
[    3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22
[    3.715148] omap-abe-twl6040: probe of sound failed with error -22

Bisect pointed to a merge commit:
first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master'

and a diff between a working kernel does not reveal anything which would
explain the change in behavior.

Further investigation showed that on the second try of loading fails
because the dai_link->platform is no longer NULL and it might be pointing
to uninitialized memory.

The fix is to move the snd_soc_dai_link and snd_soc_card inside of the
abe_twl6040 struct, which is dynamically allocated every time the driver
probes.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 38cd989e ]

The current register (04h) has a sign bit at MSB. The comments
for this calculation also mention that it's a signed register.

However, the regval is unsigned type so result of calculation
turns out to be an incorrect value when current is negative.

This patch simply fixes this by adding a casting to s16.

Fixes: 5d389b12 ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 613a41b0 ]

On s390 command perf top fails
[root@s35lp76 perf] # ./perf top -F100000  --stdio
   Error:
   cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
   	Try 'perf stat'
[root@s35lp76 perf] #

Using event -e rb0000 works as designed.  Event rb0000 is the event
number of the sampling facility for basic sampling.

During system start up the following PMUs are installed in the kernel's
PMU list (from head to tail):
   cpum_cf --> s390 PMU counter facility device driver
   cpum_sf --> s390 PMU sampling facility device driver
   uprobe
   kprobe
   tracepoint
   task_clock
   cpu_clock

Perf top executes following functions and calls perf_event_open(2) system
call with different parameters many times:

cmd_top
--> __cmd_top
    --> perf_evlist__add_default
        --> __perf_evlist__add_default
            --> perf_evlist__new_cycles (creates event type:0 (HW)
			    		config 0 (CPU_CYCLES)
	        --> perf_event_attr__set_max_precise_ip
		    Uses perf_event_open(2) to detect correct
		    precise_ip level. Fails 3 times on s390 which is ok.

Then functions cmd_top
--> __cmd_top
    --> perf_top__start_counters
        -->perf_evlist__config
	   --> perf_can_comm_exec
               --> perf_probe_api
	           This functions test support for the following events:
		   "cycles:u", "instructions:u", "cpu-clock:u" using
		   --> perf_do_probe_api
		       --> perf_event_open_cloexec
		           Test the close on exec flag support with
			   perf_event_open(2).
	               perf_do_probe_api returns true if the event is
		       supported.
		       The function returns true because event cpu-clock is
		       supported by the PMU cpu_clock.
	               This is achieved by many calls to perf_event_open(2).

Function perf_top__start_counters now calls perf_evsel__open() for every
event, which is the default event cpu_cycles (config:0) and type HARDWARE
(type:0) which a predfined frequence of 4000.

Given the above order of the PMU list, the PMU cpum_cf gets called first
and returns 0, which indicates support for this sampling. The event is
fully allocated in the function perf_event_open (file kernel/event/core.c
near line 10521 and the following check fails:

        event = perf_event_alloc(&attr, cpu, task, group_leader, NULL,
		                 NULL, NULL, cgroup_fd);
	if (IS_ERR(event)) {
		err = PTR_ERR(event);
		goto err_cred;
	}

        if (is_sampling_event(event)) {
		if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) {
			err = -EOPNOTSUPP;
			goto err_alloc;
		}
	}

The check for the interrupt capabilities fails and the system call
perf_event_open() returns -EOPNOTSUPP (-95).

Add a check to return -ENODEV when sampling is requested in PMU cpum_cf.
This allows common kernel code in the perf_event_open() system call to
test the next PMU in above list.

Fixes: 97b1198f (" "s390, perf: Use common PMU interrupt disabled code")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 67fd1437 ]

Frontend dai_link id is used for closing ADM sessions.
During concurrent usecase when one session is closed,
it closes other ADM session associated with other usecase
too. Dai_link->id should always point to Frontend dai id.
Set cpu_dai id as dai_link id to fix the issue.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4c10473d ]

On certain platforms, Display HDMI HDA codec was not going to sleep state
after the use when links are powered down after turning off the display
power. As per the HW recommendation, links are powered down before turning
off the display power to ensure that the codec goes to sleep state.

This patch was updated from an earlier version submitted upstream [1]
which conflicted with the changes merged for HDaudio codec support
with the Intel DSP.

[1] https://patchwork.kernel.org/patch/10540213/Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 20e00db2 ]

Stack memory isn't DMA-safe so it isn't safe to use either
regmap_raw_read or regmap_bulk_read to read into stack memory.

The two functions to read the scratch registers were using
stack memory and regmap_raw_read. It's not worth allocating
memory just for this trivial read, and it isn't time-critical.
A simple regmap_read for each register is sufficient.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 16a8ee4c ]

This patch adds missing prepare_sleve_config that is needed for
setup the DMA slave channel for I2S.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 35fdc390 ]

In case an under-voltage happens before probing the driver wont
write the critical warning into the kernel log. So don't init
of last_throttled during probe and fix this issue.

Fixes: 74d1e007 ("hwmon: Add support for RPi voltage sensor")
Reported-by: "Noralf Trønnes" <noralf@tronnes.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 70df9ebb ]

When using DT configurations, the id pointer might turn out to
be NULL. Then the driver encounters NULL pointer access:

  Unable to handle kernel read from unreadable memory at vaddr 00000018
  [...]
  PC is at ina2xx_probe+0x114/0x200
  LR is at ina2xx_probe+0x10c/0x200
  [...]
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

The reason is that i2c core returns the id pointer by matching
id_table with client->name, while the client->name is actually
using the name from the first string in the DT compatible list,
not the best one. So i2c core would fail to match the id_table
if the best matched compatible string isn't the first one, and
then would return a NULL id pointer.

This probably should be fixed in i2c core. But it doesn't hurt
to make the driver robust. So this patch fixes it by using the
"chip" that's added to unify both DT and non-DT configurations.

Additionally, since id pointer could be null, so as id->name:
  ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm)
  ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm)

So this patch also fixes NULL name pointer, using client->name
to play safe and to align with hwmon->name.

Fixes: bd0ddd4d ("hwmon: (ina2xx) Add OF device ID table")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b89e242e ]

Direct returns from within a loop are rude, but it doesn't mean it gets
to avoid releasing the memory acquired beforehand.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181109023937.96105-3-farman@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 806212f9 ]

If pfn_array_alloc fails somehow, we need to release the pfn_array_table
that was malloc'd earlier.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20181109023937.96105-2-farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 29e38801 ]

nft_compat ops do not have static storage duration, unlike all other
expressions.

When nf_tables_expr_destroy() returns, expr->ops might have been
free'd already, so we need to store next address before calling
expression destructor.

For same reason, we can't deref match pointer after nft_xt_put().

This can be easily reproduced by adding msleep() before
nft_match_destroy() returns.

Fixes: 0ca743a5 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0fbcc5b5 ]

xt_rateest_net_exit() was added to check whether rules are flushed
successfully. but ->net_exit() callback is called earlier than
->destroy() callback.
So that ->net_exit() callback can't check that.

test commands:
   %ip netns add vm1
   %ip netns exec vm1 iptables -t mangle -I PREROUTING -p udp \
	   --dport 1111 -j RATEEST --rateest-name ap \
	   --rateest-interval 250ms --rateest-ewma 0.5s
   %ip netns del vm1

splat looks like:
[  668.813518] WARNING: CPU: 0 PID: 87 at net/netfilter/xt_RATEEST.c:210 xt_rateest_net_exit+0x210/0x340 [xt_RATEEST]
[  668.813518] Modules linked in: xt_RATEEST xt_tcpudp iptable_mangle bpfilter ip_tables x_tables
[  668.813518] CPU: 0 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc7+ #21
[  668.813518] Workqueue: netns cleanup_net
[  668.813518] RIP: 0010:xt_rateest_net_exit+0x210/0x340 [xt_RATEEST]
[  668.813518] Code: 00 48 8b 85 30 ff ff ff 4c 8b 23 80 38 00 0f 85 24 01 00 00 48 8b 85 30 ff ff ff 4d 85 e4 4c 89 a5 58 ff ff ff c6 00 f8 74 b2 <0f> 0b 48 83 c3 08 4c 39 f3 75 b0 48 b8 00 00 00 00 00 fc ff df 49
[  668.813518] RSP: 0018:ffff8801156c73f8 EFLAGS: 00010282
[  668.813518] RAX: ffffed0022ad8e85 RBX: ffff880118928e98 RCX: 5db8012a00000000
[  668.813518] RDX: ffff8801156c7428 RSI: 00000000cb1d185f RDI: ffff880115663b74
[  668.813518] RBP: ffff8801156c74d0 R08: ffff8801156633c0 R09: 1ffff100236440be
[  668.813518] R10: 0000000000000001 R11: ffffed002367d852 R12: ffff880115142b08
[  668.813518] R13: 1ffff10022ad8e81 R14: ffff880118928ea8 R15: dffffc0000000000
[  668.813518] FS:  0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000
[  668.813518] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  668.813518] CR2: 0000563aa69f4f28 CR3: 0000000105a16000 CR4: 00000000001006f0
[  668.813518] Call Trace:
[  668.813518]  ? unregister_netdevice_many+0xe0/0xe0
[  668.813518]  ? xt_rateest_net_init+0x2c0/0x2c0 [xt_RATEEST]
[  668.813518]  ? default_device_exit+0x1ca/0x270
[  668.813518]  ? remove_proc_entry+0x1cd/0x390
[  668.813518]  ? dev_change_net_namespace+0xd00/0xd00
[  668.813518]  ? __init_waitqueue_head+0x130/0x130
[  668.813518]  ops_exit_list.isra.10+0x94/0x140
[  668.813518]  cleanup_net+0x45b/0x900
[  668.813518]  ? net_drop_ns+0x110/0x110
[  668.813518]  ? swapgs_restore_regs_and_return_to_usermode+0x3c/0x80
[  668.813518]  ? save_trace+0x300/0x300
[  668.813518]  ? lock_acquire+0x196/0x470
[  668.813518]  ? lock_acquire+0x196/0x470
[  668.813518]  ? process_one_work+0xb60/0x1de0
[  668.813518]  ? _raw_spin_unlock_irq+0x29/0x40
[  668.813518]  ? _raw_spin_unlock_irq+0x29/0x40
[  668.813518]  ? __lock_acquire+0x4500/0x4500
[  668.813518]  ? __lock_is_held+0xb4/0x140
[  668.813518]  process_one_work+0xc13/0x1de0
[  668.813518]  ? pwq_dec_nr_in_flight+0x3c0/0x3c0
[  668.813518]  ? set_load_weight+0x270/0x270
[ ... ]

Fixes: 3427b2ab ("netfilter: make xt_rateest hash table per net")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fb50c09e ]

Adam reported a record command crash for simple session like:

  $ perf record -e cpu-clock ls

with following backtrace:

  Program received signal SIGSEGV, Segmentation fault.
  3543            ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]);
  (gdb) bt
  #0  perf_event__synthesize_event_update_unit
  #1  0x000000000051e469 in perf_event__synthesize_extra_attr
  #2  0x00000000004445cb in record__synthesize
  #3  0x0000000000444bc5 in __cmd_record
  ...

We synthesize an update event that needs to touch the evsel id array,
which is not defined at that time. Fix this by forcing the id allocation
for events with their unit defined.

Reflecting possible read_format ID bit in the attr tests.
Reported-by: Yongxin Liu <yongxin.liu@outlook.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adam Lee <leeadamrobert@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477
Fixes: bfd8f72c ("perf record: Synthesize unit/scale/... in event update")
Link: http://lkml.kernel.org/r/20181112130012.5424-1-jolsa@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 25d8bced ]

Start flood ping for each cpu while loading/flushing rulesets to make
sure we do not access already-free'd rules from nf_tables evaluation loop.

Also add this to TARGETS so 'make run_tests' in selftest dir runs it
automatically.

This would have caught the bug fixed in previous change
("netfilter: nf_tables: do not skip inactive chains during generation update")
sooner.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0fb39bbe ]

There is no synchronization between packet path and the configuration plane.

The packet path uses two arrays with rules, one contains the current (active)
generation.  The other either contains the last (obsolete) generation or
the future one.

Consider:
cpu1               cpu2
                   nft_do_chain(c);
delete c
net->gen++;
                   genbit = !!net->gen;
                   rules = c->rg[genbit];

cpu1 ignores c when updating if c is not active anymore in the new
generation.

On cpu2, we now use rules from wrong generation, as c->rg[old]
contains the rules matching 'c' whereas c->rg[new] was not updated and
can even point to rules that have been free'd already, causing a crash.

To fix this, make sure that 'current' to the 'next' generation are
identical for chains that are going away so that c->rg[new] will just
use the matching rules even if genbit was incremented already.

Fixes: 0cbc06b3 ("netfilter: nf_tables: remove synchronize_rcu in commit phase")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3c5cdb17 ]

When list->count is 0, the list is deleted by GC. But list->count is
never reached 0 because initial count value is 1 and it is increased
when node is inserted. So that initial value of list->count should be 0.

Originally GC always finds zero count list through deleting node and
decreasing count. However, list may be left empty since node insertion
may fail eg.  allocaton problem. In order to solve this problem, GC
routine also finds zero count list without deleting node.

Fixes: cb2b36f5 ("netfilter: nf_conncount: Switch to plain list")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 31568ec0 ]

nf_conncount_tuple is an element of nft_connlimit and that is deleted by
conn_free(). Elements can be deleted by both GC routine and data path
functions (nf_conncount_lookup, nf_conncount_add) and they call
conn_free() to free elements. But conn_free() only protects lists, not
each element. So that list_del corruption could occurred.

The conn_free() doesn't check whether element is already deleted. In
order to protect elements, dead flag is added. If an element is deleted,
dead flag is set. The only conn_free() can delete elements so that both
list lock and dead flag are enough to protect it.

test commands:
   %nft add table ip filter
   %nft add chain ip filter input { type filter hook input priority 0\; }
   %nft add rule filter input meter test { ip id ct count over 2 } counter

splat looks like:
[ 1779.495778] list_del corruption, ffff8800b6e12008->prev is LIST_POISON2 (dead000000000200)
[ 1779.505453] ------------[ cut here ]------------
[ 1779.506260] kernel BUG at lib/list_debug.c:50!
[ 1779.515831] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[ 1779.516772] CPU: 0 PID: 33 Comm: kworker/0:2 Not tainted 4.19.0-rc6+ #22
[ 1779.516772] Workqueue: events_power_efficient nft_rhash_gc [nf_tables_set]
[ 1779.516772] RIP: 0010:__list_del_entry_valid+0xd8/0x150
[ 1779.516772] Code: 39 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 ea 48 c7 c7 00 c3 5b 98 e8 0f dc 40 ff 0f 0b 48 c7 c7 60 c3 5b 98 e8 01 dc 40 ff <0f> 0b 48 c7 c7 c0 c3 5b 98 e8 f3 db 40 ff 0f 0b 48 c7 c7 20 c4 5b
[ 1779.516772] RSP: 0018:ffff880119127420 EFLAGS: 00010286
[ 1779.516772] RAX: 000000000000004e RBX: dead000000000200 RCX: 0000000000000000
[ 1779.516772] RDX: 000000000000004e RSI: 0000000000000008 RDI: ffffed0023224e7a
[ 1779.516772] RBP: ffff88011934bc10 R08: ffffed002367cea9 R09: ffffed002367cea9
[ 1779.516772] R10: 0000000000000001 R11: ffffed002367cea8 R12: ffff8800b6e12008
[ 1779.516772] R13: ffff8800b6e12010 R14: ffff88011934bc20 R15: ffff8800b6e12008
[ 1779.516772] FS:  0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000
[ 1779.516772] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1779.516772] CR2: 00007fc876534010 CR3: 000000010da16000 CR4: 00000000001006f0
[ 1779.516772] Call Trace:
[ 1779.516772]  conn_free+0x9f/0x2b0 [nf_conncount]
[ 1779.516772]  ? nf_ct_tmpl_alloc+0x2a0/0x2a0 [nf_conntrack]
[ 1779.516772]  ? nf_conncount_add+0x520/0x520 [nf_conncount]
[ 1779.516772]  ? do_raw_spin_trylock+0x1a0/0x1a0
[ 1779.516772]  ? do_raw_spin_trylock+0x10/0x1a0
[ 1779.516772]  find_or_evict+0xe5/0x150 [nf_conncount]
[ 1779.516772]  nf_conncount_gc_list+0x162/0x360 [nf_conncount]
[ 1779.516772]  ? nf_conncount_lookup+0xee0/0xee0 [nf_conncount]
[ 1779.516772]  ? _raw_spin_unlock_irqrestore+0x45/0x50
[ 1779.516772]  ? trace_hardirqs_off+0x6b/0x220
[ 1779.516772]  ? trace_hardirqs_on_caller+0x220/0x220
[ 1779.516772]  nft_rhash_gc+0x16b/0x540 [nf_tables_set]
[ ... ]

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fd3e71a9 ]

conn_free() holds lock with spin_lock() and it is called by both
nf_conncount_lookup() and nf_conncount_gc_list(). nf_conncount_lookup()
is called from bottom-half context and nf_conncount_gc_list() from
process context. So that spin_lock() call is not safe. Hence
conn_free() should use spin_lock_bh() instead of spin_lock().

test commands:
   %nft add table ip filter
   %nft add chain ip filter input { type filter hook input priority 0\; }
   %nft add rule filter input meter test { ip saddr ct count over 2 } \
	   counter

splat looks like:
[  461.996507] ================================
[  461.998999] WARNING: inconsistent lock state
[  461.998999] 4.19.0-rc6+ #22 Not tainted
[  461.998999] --------------------------------
[  461.998999] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[  461.998999] kworker/0:2/134 [HC0[0]:SC0[0]:HE1:SE1] takes:
[  461.998999] 00000000a71a559a (&(&list->list_lock)->rlock){+.?.}, at: conn_free+0x69/0x2b0 [nf_conncount]
[  461.998999] {IN-SOFTIRQ-W} state was registered at:
[  461.998999]   _raw_spin_lock+0x30/0x70
[  461.998999]   nf_conncount_add+0x28a/0x520 [nf_conncount]
[  461.998999]   nft_connlimit_eval+0x401/0x580 [nft_connlimit]
[  461.998999]   nft_dynset_eval+0x32b/0x590 [nf_tables]
[  461.998999]   nft_do_chain+0x497/0x1430 [nf_tables]
[  461.998999]   nft_do_chain_ipv4+0x255/0x330 [nf_tables]
[  461.998999]   nf_hook_slow+0xb1/0x160
[ ... ]
[  461.998999] other info that might help us debug this:
[  461.998999]  Possible unsafe locking scenario:
[  461.998999]
[  461.998999]        CPU0
[  461.998999]        ----
[  461.998999]   lock(&(&list->list_lock)->rlock);
[  461.998999]   <Interrupt>
[  461.998999]     lock(&(&list->list_lock)->rlock);
[  461.998999]
[  461.998999]  *** DEADLOCK ***
[  461.998999]
[ ... ]

Fixes: 5c789e13 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c4b7d1ba ]

Fixes gcc '-Wunused-but-set-variable' warning:

fs/sysv/inode.c: In function '__sysv_write_inode':
fs/sysv/inode.c:239:6: warning:
 variable 'err' set but not used [-Wunused-but-set-variable]

__sysv_write_inode should return 'err' instead of 0

Fixes: 05459ca8 ("repair sysv_write_inode(), switch sysv to simple_fsync()")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5f8d3ab1 ]

With the introduction of commit 3edfb7bd ("gpiolib: Show correct
direction from the beginning") the gpiolib will attempt to read the
direction of all pins, which triggers a read from protected register
regions.

The pins 0 through 3 and 81 through 84 are protected, so mark these as
reserved.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 278df5e5 ]

drvdata is actually sun8i_codec, not snd_soc_card, so it crashes
when calling snd_soc_card_get_drvdata().

Drop card and scodec vars anyway since we don't need to
disable/unprepare clocks - it's already done by calling
runtime_suspend()

Drop clk_disable_unprepare() calls for the same reason.

Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 53909030 ]

Function getline() returns -1 on failure to read a line, thus creating
an infinite loop in get_fdinfo() if the key is not found. Fix it by
calling the function only as long as we get a strictly positive return
value.

Found by copying the code for a key which is not always present...

Fixes: 71bb428f ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cec83ff1 ]

While playing with initialization order of modem device, it has been
discovered that under some circumstances (early console init, I
believe) its .pm() callback may be called before the
uart_port->private_data pointer is initialized from
plat_serial8250_port->private_data, resulting in NULL pointer
dereference.  Fix it by checking for uninitialized pointer before using
it in modem_pm().

Fixes: aabf3173 ("ARM: OMAP1: ams-delta: update the modem to use regulator API")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 419b194c ]

At the same time the AM3517 EVM was gaining WiFi support,
separate patches were introduced to move the interrupt
from HIGH to RISING.  Because they overlapped, this was not
done to the AM3517-EVM.  This patch fixes Kernel 4.19+

Fixes: 6bf5e341 ("ARM: dts: am3517-som: Add WL127x Wifi")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3d8b804b ]

The interrupt on mmc3_dat1 is wrong which prevents this from
appearing in /proc/interrupts.

Fixes: ab8dd3ae ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV") #Kernel 4.9+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6809564d ]

When the Torpedo was first introduced back at Kernel 4.2,
the interrupt extended flag has been set incorrectly.

It was subsequently moved, so this patch corrects Kernel
4.18+

Fixes: a3886730 ("ARM: dts: Move move WiFi bindings to
logicpd-torpedo-37xx-devkit") # v4.18+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e7f4ffff ]

The MMC1 is active low, not active high.  For some reason,
this worked with different combination of U-Boot and kernels,
but it's supposed to be active low and is currently broken.

Fixes: cfaa856a ("ARM: dts: am3517: Add pinmuxing, CD and
WP for MMC1") #kernel 4.18+
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c3e43d8b ]

We return 0 unconditionally in 'rtw_wx_read32()'.
However, 'ret' is set to some error codes in several error handling paths.

Return 'ret' instead to propagate the error code.

Fixes: 554c0a3a ("staging: Add rtl8723bs sdio wifi driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e14856f6 ]

For some reason the dapm widgets are incorrectly defined from the start,
Not sure how we ended up with such thing. Fix them now!

Without this fix the backend dais are always powered up even if there
is no active stream.
Reported-by: Jimmy Cheng-Yi Chiang <cychiang@google.com>
Reported-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 112b57fa ]

SD line mask for MI2S starts from BIT 0 instead of BIT 1.
Fix all bit mask for MI2S SD lines.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3ee9a76a ]

commit 4d230d12 ("ASoC: rsnd: fixup not to call clk_get/set under
non-atomic") fixuped clock start timing. But it exchanged clock start
checker from ssi->usrcnt to ssi->rate.

Current rsnd_ssi_master_clk_start() is called from .prepare,
but some player (for example GStreamer) might calls it many times.
In such case, the checker might returns error even though it was not
error. It should check ssi->usrcnt instead of ssi->rate.
This patch fixup it. Without this patch, GStreamer can't switch
48kHz / 44.1kHz.
Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eef3dc34 ]

When building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from
the function omap44xx_prm_late_init() to the function
.init.text:omap44xx_prm_enable_io_wakeup()
The function omap44xx_prm_late_init() references
the function __init omap44xx_prm_enable_io_wakeup().
This is often because omap44xx_prm_late_init lacks a __init
annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.

Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there
is no more mismatch.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 867d0ad4 ]

Commit 04157469 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.

First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.

Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.

This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().

This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
 - both xps_needed and xps_rxqs_needed, in case of rxqs maps,
 - only xps_needed, in case of CPU maps.

Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.

Fixes: 04157469 ("net: Use static_key for XPS maps")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f28c020f ]

Before commit 80d19669 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.

Fixes: 80d19669 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4135cce7 ]

sctp_assoc_update_frag_point() should be called whenever asoc->pathmtu
changes, but we missed one place in sctp_association_init(). It would
cause frag_point is zero when sending data.

As says in Jakub's reproducer, if sp->pathmtu is set by socketopt, the
new asoc->pathmtu inherits it in sctp_association_init(). Later when
transports are added and their pmtu >= asoc->pathmtu, it will never
call sctp_assoc_update_frag_point() to set frag_point.

This patch is to fix it by updating frag_point after asoc->pathmtu is
set as sp->pathmtu in sctp_association_init(). Note that it moved them
after sctp_stream_init(), as stream->si needs to be set first.

Frag_point's calculation is also related with datachunk's type, so it
needs to update frag_point when stream->si may be changed in
sctp_process_init().

v1->v2:
  - call sctp_assoc_update_frag_point() separately in sctp_process_init
    and sctp_association_init, per Marcelo's suggestion.

Fixes: 2f5e3c9d ("sctp: introduce sctp_assoc_update_frag_point")
Reported-by: Jakub Audykowicz <jakub.audykowicz@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>