Skip to content

L
linux
Switch branch/tag
  1. 09 Oct, 2020 4 commits
  3. 08 Oct, 2020 5 commits
    • Alexei Starovoitov's avatar
      Merge branch 'libbpf: auto-resize relocatable LOAD/STORE instructions' · 1e9259ec
      Alexei Starovoitov authored 
      Andrii Nakryiko says:

====================
Patch set implements logic in libbpf to auto-adjust memory size (1-, 2-, 4-,
8-bytes) of load/store (LD/ST/STX) instructions which have BPF CO-RE field
offset relocation associated with it. In practice this means transparent
handling of 32-bit kernels, both pointer and unsigned integers. Signed
integers are not relocatable with zero-extending loads/stores, so libbpf
poisons them and generates a warning. If/when BPF gets support for
sign-extending loads/stores, it would be possible to automatically relocate
them as well.

All the details are contained in patch #2 comments and commit message.
Patch #3 is a simple change in libbpf to make advanced testing with custom BTF
easier. Patch #4 validates correct uses of auto-resizable loads, as well as
check that libbpf fails invalid uses. Patch #1 skips CO-RE relocation for
programs that had bpf_program__set_autoload(prog, false) set on them, reducing
warnings and noise.

v2->v3:
  - fix copyright (Alexei);
v1->v2:
  - more consistent names for instruction mem size convertion routines (Alexei);
  - extended selftests to use relocatable STX instructions (Alexei);
  - added a fix for skipping CO-RE relocation for non-loadable programs.

Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Tony Ambardar <tony.ambardar@gmail.com>
====================
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      1e9259ec
    • Andrii Nakryiko's avatar
      selftests/bpf: Validate libbpf's auto-sizing of LD/ST/STX instructions · 888d83b9
      Andrii Nakryiko authored 
      Add selftests validating libbpf's auto-resizing of load/store instructions
when used with CO-RE relocations. An explicit and manual approach with using
bpf_core_read() is also demonstrated and tested. Separate BPF program is
supposed to fail due to using signed integers of sizes that differ from
kernel's sizes.

To reliably simulate 32-bit BTF (i.e., the one with sizeof(long) ==
sizeof(void *) == 4), selftest generates its own custom BTF and passes it as
a replacement for real kernel BTF. This allows to test 32/64-bitness mix on
all architectures.
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-5-andrii@kernel.org
      888d83b9
    • Andrii Nakryiko's avatar
      libbpf: Allow specifying both ELF and raw BTF for CO-RE BTF override · 2b7d88c2
      Andrii Nakryiko authored 
      Use generalized BTF parsing logic, making it possible to parse BTF both from
ELF file, as well as a raw BTF dump. This makes it easier to write custom
tests with manually generated BTFs.
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-4-andrii@kernel.org
      2b7d88c2
    • Andrii Nakryiko's avatar
      libbpf: Support safe subset of load/store instruction resizing with CO-RE · a66345bc
      Andrii Nakryiko authored 
      Add support for patching instructions of the following form:
  - rX = *(T *)(rY + <off>);
  - *(T *)(rX + <off>) = rY;
  - *(T *)(rX + <off>) = <imm>, where T is one of {u8, u16, u32, u64}.

For such instructions, if the actual kernel field recorded in CO-RE relocation
has a different size than the one recorded locally (e.g., from vmlinux.h),
then libbpf will adjust T to an appropriate 1-, 2-, 4-, or 8-byte loads.

In general, such transformation is not always correct and could lead to
invalid final value being loaded or stored. But two classes of cases are
always safe:
  - if both local and target (kernel) types are unsigned integers, but of
  different sizes, then it's OK to adjust load/store instruction according to
  the necessary memory size. Zero-extending nature of such instructions and
  unsignedness make sure that the final value is always correct;
  - pointer size mismatch between BPF target architecture (which is always
  64-bit) and 32-bit host kernel architecture can be similarly resolved
  automatically, because pointer is essentially an unsigned integer. Loading
  32-bit pointer into 64-bit BPF register with zero extension will leave
  correct pointer in the register.

Both cases are necessary to support CO-RE on 32-bit kernels, as `unsigned
long` in vmlinux.h generated from 32-bit kernel is 32-bit, but when compiled
with BPF program for BPF target it will be treated by compiler as 64-bit
integer. Similarly, pointers in vmlinux.h are 32-bit for kernel, but treated
as 64-bit values by compiler for BPF target. Both problems are now resolved by
libbpf for direct memory reads.

But similar transformations are useful in general when kernel fields are
"resized" from, e.g., unsigned int to unsigned long (or vice versa).

Now, similar transformations for signed integers are not safe to perform as
they will result in incorrect sign extension of the value. If such situation
is detected, libbpf will emit helpful message and will poison the instruction.
Not failing immediately means that it's possible to guard the instruction
based on kernel version (or other conditions) and make sure it's not
reachable.

If there is a need to read signed integers that change sizes between different
kernels, it's possible to use BPF_CORE_READ_BITFIELD() macro, which works both
with bitfields and non-bitfield integers of any signedness and handles
sign-extension properly. Also, bpf_core_read() with proper size and/or use of
bpf_core_field_size() relocation could allow to deal with such complicated
situations explicitly, if not so conventiently as direct memory reads.

Selftests added in a separate patch in progs/test_core_autosize.c demonstrate
both direct memory and probed use cases.

BPF_CORE_READ() is not changed and it won't deal with such situations as
automatically as direct memory reads due to the signedness integer
limitations, which are much harder to detect and control with compiler macro
magic. So it's encouraged to utilize direct memory reads as much as possible.
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-3-andrii@kernel.org
      a66345bc
    • Andrii Nakryiko's avatar
      libbpf: Skip CO-RE relocations for not loaded BPF programs · 47f7cf63
      Andrii Nakryiko authored 
      Bypass CO-RE relocations step for BPF programs that are not going to be
loaded. This allows to have BPF programs compiled in and disabled dynamically
if kernel is not supposed to provide enough relocation information. In such
case, there won't be unnecessary warnings about failed relocations.

Fixes: d9297581 ("libbpf: Support disabling auto-loading BPF programs")
Signed-off-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201008001025.292064-2-andrii@kernel.org
      47f7cf63
  5. 07 Oct, 2020 5 commits
  7. 06 Oct, 2020 10 commits
  9. 05 Oct, 2020 4 commits
  11. 03 Oct, 2020 1 commit
  13. 02 Oct, 2020 11 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7