1. 14 Jan, 2019 8 commits
  2. 12 Jan, 2019 5 commits
  3. 11 Jan, 2019 27 commits
    • Daniel Vetter's avatar
      drm/doc: Polish kerneldoc for drm_device.h · 3214a166
      Daniel Vetter authored
      - Move all the legacy gunk at the bottom, and exclude it from
        kerneldoc.
      - Documentation for the remaining bits.
      
      v2: Fix typo (Sam).
      
      Cc: Sam Ravnborg <sam@ravnborg.org>
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111164048.29067-5-daniel.vetter@ffwll.ch
      3214a166
    • Daniel Vetter's avatar
      drm/tda998x: Don't set dpms hook · 9cd070a6
      Daniel Vetter authored
      Doesn't do anything for atomic drivers.
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Russell King <linux@armlinux.org.uk>
      Acked-by: default avatarNoralf Trønnes <noralf@tronnes.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-6-daniel.vetter@ffwll.ch
      9cd070a6
    • Daniel Vetter's avatar
      drm/arc: Don't set the dpms hook · 81ce50c2
      Daniel Vetter authored
      Doesn't do anything for atomic.
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Alexey Brodkin <abrodkin@synopsys.com>
      Acked-by: default avatarNoralf Trønnes <noralf@tronnes.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-5-daniel.vetter@ffwll.ch
      81ce50c2
    • Daniel Vetter's avatar
      drm: Move the legacy kms disable_all helper to crtc helpers · c2d88e06
      Daniel Vetter authored
      It's not a core function, and the matching atomic functions are also
      not in the core. Plus the suspend/resume helper is also already there.
      
      Needs a tiny bit of open-coding, but less midlayer beats that I think.
      
      v2: Rebase onto ast (which gained a new user).
      
      Cc: Sam Bobroff <sbobroff@linux.ibm.com>
      Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Reviewed-by: default avatarSean Paul <sean@poorly.run>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
      Cc: Maxime Ripard <maxime.ripard@bootlin.com>
      Cc: Sean Paul <sean@poorly.run>
      Cc: David Airlie <airlied@linux.ie>
      Cc: Ben Skeggs <bskeggs@redhat.com>
      Cc: Alex Deucher <alexander.deucher@amd.com>
      Cc: "Christian König" <christian.koenig@amd.com>
      Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
      Cc: Rex Zhu <Rex.Zhu@amd.com>
      Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
      Cc: Huang Rui <ray.huang@amd.com>
      Cc: Shaoyun Liu <Shaoyun.Liu@amd.com>
      Cc: Monk Liu <Monk.Liu@amd.com>
      Cc: nouveau@lists.freedesktop.org
      Cc: amd-gfx@lists.freedesktop.org
      Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-4-daniel.vetter@ffwll.ch
      c2d88e06
    • Linus Walleij's avatar
      drm/panel: Add a driver for the TPO TPG110 · 324bb707
      Linus Walleij authored
      The TPO (Toppoly) TPG110 is a pretty generic display driver
      similar in vein to the Ilitek 93xx devices. It is not a panel
      per se but a driver used with several low-cost noname panels.
      
      This is used on the Nomadik NHK15 combined with a OSD
      OSD057VA01CT display for WVGA 800x480.
      
      The driver is pretty minimalistic right now but can be
      extended to handle non-default polarities, gamma correction
      etc.
      
      The driver is based on the baked-in code in
      drivers/video/fbdev/amba-clcd-nomadik.c which will be
      decomissioned once this us upstream.
      
      Cc: Noralf Trønnes <noralf@tronnes.org>
      Acked-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Acked-by: default avatarNoralf Trønnes <noralf@tronnes.org>
      Acked-by: default avatarJagan Teki <jagan@amarulasolutions.com>
      Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111175406.27646-1-linus.walleij@linaro.org
      324bb707
    • Paul Kocialkowski's avatar
      drm: Auto-set allow_fb_modifiers when given modifiers at plane init · 890880dd
      Paul Kocialkowski authored
      When drivers pass non-empty lists of modifiers for initializing their
      planes, we can infer that they allow framebuffer modifiers and set the
      driver's allow_fb_modifiers mode config element.
      
      In case the allow_fb_modifiers element was not set (some drivers tend
      to set them after registering planes), the modifiers will still be
      registered but won't be available to userspace unless the flag is set
      later. However in that case, the IN_FORMATS blob won't be created.
      
      In order to avoid this case and generally reduce the trouble associated
      with the flag, always set allow_fb_modifiers when a non-empty list of
      format modifiers is passed at plane init.
      Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Signed-off-by: default avatarPaul Kocialkowski <paul.kocialkowski@bootlin.com>
      Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.com
      890880dd
    • Paul Kocialkowski's avatar
      drm/vc4: Limit SAND tiling support to semiplanar YUV420 formats · 0ea3305d
      Paul Kocialkowski authored
      Despite what the HVS documentation indicates, the VC4 does not actually
      support SAND tiling modes for any RGB format and only semiplanar YUV420
      formats (NV12/NV21) can be used in these tiling modes.
      
      The driver currently claims to support RGB formats for the associated
      modifiers, so remove them from the supported list in the
      format_mod_supported helper for RGB formats.
      
      Remove further checks that are no longer necessary along the way, since
      semi-planar YUV420 formats support every SAND tiling mode.
      Reviewed-by: default avatarEric Anholt <eric@anholt.net>
      Signed-off-by: default avatarPaul Kocialkowski <paul.kocialkowski@bootlin.com>
      Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181214141218.12671-1-paul.kocialkowski@bootlin.com
      0ea3305d
    • Maxime Ripard's avatar
      Merge drm/drm-next into drm-misc-next · 23d19ba0
      Maxime Ripard authored
      drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
      helper for dirtyfb series from Noralf Trønnes.
      Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
      23d19ba0
    • Daniel Vetter's avatar
    • Daniel Vetter's avatar
      drm: Unexport drm_crtc_force_disable · 1e9080ac
      Daniel Vetter authored
      It's a legacy kms only thing, good to hide it better now that all
      those old drivers use the legacy crtc helpers directly.
      Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
      Cc: Maxime Ripard <maxime.ripard@bootlin.com>
      Cc: Sean Paul <sean@poorly.run>
      Cc: David Airlie <airlied@linux.ie>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-3-daniel.vetter@ffwll.ch
      1e9080ac
    • Daniel Vetter's avatar
      drm/nouveau: Stop using drm_crtc_force_disable · 934c5b32
      Daniel Vetter authored
      The correct way for legacy drivers to update properties that need to
      do a full modeset, is to do a full modeset.
      
      Note that we don't need to call the drm_mode_config_internal helper
      because we're not changing any of the refcounted paramters.
      
      v2: Fixup error handling (Ville). Since the old code didn't bother
      I decided to just delete it instead of adding even more code for just
      error handling.
      
      Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
      Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
      Cc: Sean Paul <seanpaul@chromium.org>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.ch
      934c5b32
    • Daniel Vetter's avatar
      drm/ch7006: Stop using drm_crtc_force_disable · a50f52dc
      Daniel Vetter authored
      The correct way for legacy drivers to update properties that need to
      do a full modeset, is to do a full modeset.
      
      Note that we don't need to call the drm_mode_config_internal helper
      because we're not changing any of the refcounted paramters.
      
      v2: Fixup error handling (Ville). Since the old code didn't bother
      I decided to just delete it instead of adding even more code for just
      error handling.
      
      Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
      Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-1-daniel.vetter@ffwll.ch
      a50f52dc
    • Lyude Paul's avatar
      drm/nouveau: Use atomic VCPI helpers for MST · 232c9eec
      Lyude Paul authored
      Currently, nouveau uses the yolo method of setting up MST displays: it
      uses the old VCPI helpers (drm_dp_find_vcpi_slots()) for computing the
      display configuration. These helpers don't take care to make sure they
      take a reference to the mstb port that they're checking, and
      additionally don't actually check whether or not the topology still has
      enough bandwidth to provide the VCPI tokens required.
      
      So, drop usage of the old helpers and move entirely over to the atomic
      helpers.
      
      Changes since v6:
      * Cleanup atomic check logic and remove a bunch of unneeded checks -
        danvet
      Changes since v5:
      * Update nv50_msto_atomic_check() and nv50_mstc_atomic_check() to the
        new requirements for drm_dp_atomic_find_vcpi_slots() and
        drm_dp_atomic_release_vcpi_slots()
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-21-lyude@redhat.com
      232c9eec
    • Lyude Paul's avatar
      drm/dp_mst: Check payload count in drm_dp_mst_atomic_check() · 5e187a01
      Lyude Paul authored
      It occurred to me that we never actually check this! So let's start
      doing that.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-20-lyude@redhat.com
      5e187a01
    • Lyude Paul's avatar
      drm/dp_mst: Start tracking per-port VCPI allocations · eceae147
      Lyude Paul authored
      There has been a TODO waiting for quite a long time in
      drm_dp_mst_topology.c:
      
      	/* We cannot rely on port->vcpi.num_slots to update
      	 * topology_state->avail_slots as the port may not exist if the parent
      	 * branch device was unplugged. This should be fixed by tracking
      	 * per-port slot allocation in drm_dp_mst_topology_state instead of
      	 * depending on the caller to tell us how many slots to release.
      	 */
      
      That's not the only reason we should fix this: forcing the driver to
      track the VCPI allocations throughout a state's atomic check is
      error prone, because it means that extra care has to be taken with the
      order that drm_dp_atomic_find_vcpi_slots() and
      drm_dp_atomic_release_vcpi_slots() are called in in order to ensure
      idempotency. Currently the only driver actually using these helpers,
      i915, doesn't even do this correctly: multiple ->best_encoder() checks
      with i915's current implementation would not be idempotent and would
      over-allocate VCPI slots, something I learned trying to implement
      fallback retraining in MST.
      
      So: simplify this whole mess, and teach drm_dp_atomic_find_vcpi_slots()
      and drm_dp_atomic_release_vcpi_slots() to track the VCPI allocations for
      each port. This allows us to ensure idempotency without having to rely
      on the driver as much. Additionally: the driver doesn't need to do any
      kind of VCPI slot tracking anymore if it doesn't need it for it's own
      internal state.
      
      Additionally; this adds a new drm_dp_mst_atomic_check() helper which
      must be used by atomic drivers to perform validity checks for the new
      VCPI allocations incurred by a state.
      
      Also: update the documentation and make it more obvious that these
      /must/ be called by /all/ atomic drivers supporting MST.
      
      Changes since v9:
      * Add some missing changes that were requested by danvet that I forgot
        about after I redid all of the kref stuff:
        * Remove unnecessary state changes in intel_dp_mst_atomic_check
        * Cleanup atomic check logic for VCPI allocations - all we need to check in
          compute_config is whether or not this state disables a CRTC, then free
          VCPI based off that
      
      Changes since v8:
       * Fix compile errors, whoops!
      
      Changes since v7:
       - Don't check for mixed stale/valid VCPI allocations, just rely on
       connector registration to stop such erroneous modesets
      
      Changes since v6:
       - Keep a kref to all of the ports we have allocations on. This required
         a good bit of changing to when we call drm_dp_find_vcpi_slots(),
         mainly that we need to ensure that we only redo VCPI allocations on
         actual mode or CRTC changes, not crtc_state->active changes.
         Additionally, we no longer take the registration of the DRM connector
         for each port into account because so long as we have a kref to the
         port in the new or previous atomic state, the connector will stay
         registered.
       - Use the small changes to drm_dp_put_port() to add even more error
         checking to make misusage of the helpers more obvious. I added this
         after having to chase down various use-after-free conditions that
         started popping up from the new helpers so no one else has to
         troubleshoot that.
       - Move some accidental DRM_DEBUG_KMS() calls to DRM_DEBUG_ATOMIC()
       - Update documentation again, note that find/release() should both not be
         called on the same port in a single atomic check phase (but multiple
         calls to one or the other is OK)
      
      Changes since v4:
       - Don't skip the atomic checks for VCPI allocations if no new VCPI
         allocations happen in a state. This makes the next change I'm about
         to list here a lot easier to implement.
       - Don't ignore VCPI allocations on destroyed ports, instead ensure that
         when ports are destroyed and still have VCPI allocations in the
         topology state, the only state changes allowed are releasing said
         ports' VCPI. This prevents a state with a mix of VCPI allocations
         from destroyed ports, and allocations from valid ports.
      
      Changes since v3:
       - Don't release VCPI allocations in the topology state immediately in
         drm_dp_atomic_release_vcpi_slots(), instead mark them as 0 and skip
         over them in drm_dp_mst_duplicate_state(). This makes it so
         drm_dp_atomic_release_vcpi_slots() is still idempotent while also
         throwing warnings if the driver messes up it's book keeping and tries
         to release VCPI slots on a port that doesn't have any pre-existing
         VCPI allocation - danvet
       - Change mst_state/state in some debugging messages to "mst state"
      
      Changes since v2:
       - Use kmemdup() for duplicating MST state - danvet
       - Move port validation out of duplicate state callback - danvet
       - Handle looping through MST topology states in
         drm_dp_mst_atomic_check() so the driver doesn't have to do it
       - Fix documentation in drm_dp_atomic_find_vcpi_slots()
       - Move the atomic check for each individual topology state into it's
         own function, reduces indenting
       - Don't consider "stale" MST ports when calculating the bandwidth
         requirements. This is needed because originally we relied on the
         state duplication functions to prune any stale ports from the new
         state, which would prevent us from incorrectly considering their
         bandwidth requirements alongside legitimate new payloads.
       - Add function references in drm_dp_atomic_release_vcpi_slots() - danvet
       - Annotate atomic VCPI and atomic check functions with __must_check
         - danvet
      
      Changes since v1:
       - Don't use the now-removed ->atomic_check() for private objects hook,
         just give drivers a function to call themselves
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarDaniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-19-lyude@redhat.com
      eceae147
    • Lyude Paul's avatar
      drm/dp_mst: Add some atomic state iterator macros · bea5c38f
      Lyude Paul authored
      Changes since v6:
       - Move EXPORT_SYMBOL() for drm_dp_mst_topology_state_funcs to this
         commit
       - Document __drm_dp_mst_state_iter_get() and note that it shouldn't be
         called directly
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-18-lyude@redhat.com
      bea5c38f
    • Lyude Paul's avatar
      drm/nouveau: Grab payload lock in nv50_msto_payload() · 7aa275ca
      Lyude Paul authored
      Going through the currently programmed payloads isn't safe without
      holding mgr->payload_lock, so actually do that and warn if anyone tries
      calling nv50_msto_payload() in the future without grabbing the right
      locks.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-17-lyude@redhat.com
      7aa275ca
    • Lyude Paul's avatar
      drm/nouveau: Stop unsetting mstc->port, use malloc refs · d79a3c52
      Lyude Paul authored
      Same as we did for i915, but for nouveau this time. Additionally, we
      grab a malloc reference to the port that lasts for the entire lifetime
      of nv50_mstc, which gives us the guarantee that mstc->port will always
      point to valid memory for as long as the mstc stays around.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-16-lyude@redhat.com
      d79a3c52
    • Lyude Paul's avatar
      drm/nouveau: Keep malloc references to MST ports · 81640f01
      Lyude Paul authored
      Now that we finally have a sane way to keep port allocations around, use
      it to fix the potential unchecked ->port accesses that nouveau makes by
      making sure we keep the mst port allocated for as long as it's
      drm_connector is accessible.
      
      Additionally, now that we've guaranteed that mstc->port is allocated for
      as long as we keep mstc around we can remove the connector registration
      checks for codepaths which release payloads, allowing us to release
      payloads on active topologies properly. These registration checks were
      only required before in order to avoid situations where mstc->port could
      technically be pointing at freed memory.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-15-lyude@redhat.com
      81640f01
    • Lyude Paul's avatar
      drm/nouveau: Remove unnecessary VCPI checks in nv50_msto_cleanup() · 5e292e76
      Lyude Paul authored
      There is no need to look at the port's VCPI allocation before calling
      drm_dp_mst_deallocate_vcpi(), as we already have msto->disabled to let
      us avoid cleaning up an msto more then once. The DP MST core will never
      call drm_dp_mst_deallocate_vcpi() on it's own, which is presumably what
      these checks are meant to protect against.
      
      More importantly though, we're about to stop clearing mstc->port in the
      next commit, which means if we could potentially hit a use-after-free
      error if we tried to check mstc->port->vcpi here. So to make life easier
      for anyone who bisects this code in the future, use msto->disabled
      instead to check whether or not we need to deallocate VCPI instead.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-14-lyude@redhat.com
      5e292e76
    • Lyude Paul's avatar
      drm/nouveau: Remove bogus cleanup in nv50_mstm_add_connector() · 01324093
      Lyude Paul authored
      Trying to destroy the connector using mstc->connector.funcs->destroy()
      if connector initialization fails is wrong: there is no possible
      codepath in nv50_mstc_new where nv50_mstm_add_connector() would return
      <0 and mstc would be non-NULL.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-13-lyude@redhat.com
      01324093
    • Lyude Paul's avatar
      drm/amdgpu/display: Keep malloc ref to MST port · d2568976
      Lyude Paul authored
      Just like i915 and nouveau, it's a good idea for us to hold a malloc
      reference to the port here so that we never pass a freed pointer to any
      of the DP MST helper functions.
      
      Also, we stop unsetting aconnector->port in
      dm_dp_destroy_mst_connector(). There's literally no point to that
      assignment that I can see anyway.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
      Cc: Daniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-12-lyude@redhat.com
      d2568976
    • Lyude Paul's avatar
      drm/i915: Keep malloc references to MST ports · 79a47cd3
      Lyude Paul authored
      So that the ports stay around until we've destroyed the connectors, in
      order to ensure that we don't pass an invalid pointer to any MST helpers
      once we introduce the new MST VCPI helpers.
      
      Changes since v1:
      * Move drm_dp_mst_get_port_malloc() to where we assign
        intel_connector->port - danvet
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarDaniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Harry Wentland <harry.wentland@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-11-lyude@redhat.com
      79a47cd3
    • Lyude Paul's avatar
      drm/dp_mst: Fix payload deallocation on hotplugs using malloc refs · cfe9f903
      Lyude Paul authored
      Up until now, freeing payloads on remote MST hubs that just had ports
      removed has almost never worked because we've been relying on port
      validation in order to stop us from accessing ports that have already
      been freed from memory, but ports which need their payloads released due
      to being removed will never be a valid part of the topology after
      they've been removed.
      
      Since we've introduced malloc refs, we can replace all of the validation
      logic in payload helpers which are used for deallocation with some
      well-placed malloc krefs. This ensures that regardless of whether or not
      the ports are still valid and in the topology, any port which has an
      allocated payload will remain allocated in memory until it's payloads
      have been removed - finally allowing us to actually release said
      payloads correctly.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-10-lyude@redhat.com
      cfe9f903
    • Lyude Paul's avatar
      drm/dp_mst: Stop releasing VCPI when removing ports from topology · a68f9917
      Lyude Paul authored
      This has never actually worked, and isn't needed anyway: the driver's
      always going to try to deallocate VCPI when it tears down the display
      that the VCPI belongs to.
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
      Reviewed-by: default avatarDaniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-9-lyude@redhat.com
      a68f9917
    • Lyude Paul's avatar
      drm/dp_mst: Restart last_connected_port_and_mstb() if topology ref fails · 56d1c14e
      Lyude Paul authored
      While this isn't a complete fix, this will improve the reliability of
      drm_dp_get_last_connected_port_and_mstb() pretty significantly during
      hotplug events, since there's a chance that the in-memory topology tree
      may not be fully updated when drm_dp_get_last_connected_port_and_mstb()
      is called and thus might end up causing our search to fail on an mstb
      whose topology refcount has reached 0, but has not yet been removed from
      it's parent.
      
      Ideally, we should further fix this problem by ensuring that we deal
      with the potential for racing with a hotplug event, which would look
      like this:
      
      * drm_dp_payload_send_msg() retrieves the last living relative of mstb
        with drm_dp_get_last_connected_port_and_mstb()
      * drm_dp_payload_send_msg() starts building payload message
        At the same time, mstb gets unplugged from the topology and is no
        longer the actual last living relative of the original mstb
      * drm_dp_payload_send_msg() tries sending the payload message, hub times
        out
      * Hub timed out, we give up and run away-resulting in the payload being
        leaked
      
      This could be fixed by restarting the
      drm_dp_get_last_connected_port_and_mstb() search whenever we get a
      timeout, sending the payload to the new mstb, then repeating until
      either the entire topology is removed from the system or
      drm_dp_get_last_connected_port_and_mstb() fails. But since the above
      race condition is not terribly likely, we'll address that in a later
      patch series once we've improved the recovery handling for VCPI
      allocations in the rest of the DP MST helpers.
      
      Changes since v1:
      * Convert kerneldoc for drm_dp_get_last_connected_port_and_mstb to
        normal comment - danvet
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
      Reviewed-by: default avatarDaniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-8-lyude@redhat.com
      56d1c14e
    • Lyude Paul's avatar
      drm/dp_mst: Introduce new refcounting scheme for mstbs and ports · ebcc0e6b
      Lyude Paul authored
      The current way of handling refcounting in the DP MST helpers is really
      confusing and probably just plain wrong because it's been hacked up many
      times over the years without anyone actually going over the code and
      seeing if things could be simplified.
      
      To the best of my understanding, the current scheme works like this:
      drm_dp_mst_port and drm_dp_mst_branch both have a single refcount. When
      this refcount hits 0 for either of the two, they're removed from the
      topology state, but not immediately freed. Both ports and branch devices
      will reinitialize their kref once it's hit 0 before actually destroying
      themselves. The intended purpose behind this is so that we can avoid
      problems like not being able to free a remote payload that might still
      be active, due to us having removed all of the port/branch device
      structures in memory, as per:
      
      commit 91a25e46 ("drm/dp/mst: deallocate payload on port destruction")
      
      Which may have worked, but then it caused use-after-free errors. Being
      new to MST at the time, I tried fixing it;
      
      commit 263efde3 ("drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()")
      
      But, that was broken: both drm_dp_mst_port and drm_dp_mst_branch structs
      are validated in almost every DP MST helper function. Simply put, this
      means we go through the topology and try to see if the given
      drm_dp_mst_branch or drm_dp_mst_port is still attached to something
      before trying to use it in order to avoid dereferencing freed memory
      (something that has happened a LOT in the past with this library).
      Because of this it doesn't actually matter whether or not we keep keep
      the ports and branches around in memory as that's not enough, because
      any function that validates the branches and ports passed to it will
      still reject them anyway since they're no longer in the topology
      structure. So, use-after-free errors were fixed but payload deallocation
      was completely broken.
      
      Two years later, AMD informed me about this issue and I attempted to
      come up with a temporary fix, pending a long-overdue cleanup of this
      library:
      
      commit c54c7374 ("drm/dp_mst: Skip validating ports during destruction, just ref")
      
      But then that introduced use-after-free errors, so I quickly reverted
      it:
      
      commit 9765635b ("Revert "drm/dp_mst: Skip validating ports during destruction, just ref"")
      
      And in the process, learned that there is just no simple fix for this:
      the design is just broken. Unfortunately, the usage of these helpers are
      quite broken as well. Some drivers like i915 have been smart enough to
      avoid accessing any kind of information from MST port structures, but
      others like nouveau have assumed, understandably so, that
      drm_dp_mst_port structures are normal and can just be accessed at any
      time without worrying about use-after-free errors.
      
      After a lot of discussion, me and Daniel Vetter came up with a better
      idea to replace all of this.
      
      To summarize, since this is documented far more indepth in the
      documentation this patch introduces, we make it so that drm_dp_mst_port
      and drm_dp_mst_branch structures have two different classes of
      refcounts: topology_kref, and malloc_kref. topology_kref corresponds to
      the lifetime of the given drm_dp_mst_port or drm_dp_mst_branch in it's
      given topology. Once it hits zero, any associated connectors are removed
      and the branch or port can no longer be validated. malloc_kref
      corresponds to the lifetime of the memory allocation for the actual
      structure, and will always be non-zero so long as the topology_kref is
      non-zero. This gives us a way to allow callers to hold onto port and
      branch device structures past their topology lifetime, and dramatically
      simplifies the lifetimes of both structures. This also finally fixes the
      port deallocation problem, properly.
      
      Additionally: since this now means that we can keep ports and branch
      devices allocated in memory for however long we need, we no longer need
      a significant amount of the port validation that we currently do.
      
      Additionally, there is one last scenario that this fixes, which couldn't
      have been fixed properly beforehand:
      
      - CPU1 unrefs port from topology (refcount 1->0)
      - CPU2 refs port in topology(refcount 0->1)
      
      Since we now can guarantee memory safety for ports and branches
      as-needed, we also can make our main reference counting functions fix
      this problem by using kref_get_unless_zero() internally so that topology
      refcounts can only ever reach 0 once.
      
      Changes since v4:
      * Change the kernel-figure summary for dp-mst/topology-figure-1.dot a
        bit - danvet
      * Remove figure numbers - danvet
      
      Changes since v3:
      * Remove rebase detritus - danvet
      * Split out purely style changes into separate patches - hwentlan
      
      Changes since v2:
      * Fix commit message - checkpatch
      * s/)-1/) - 1/g - checkpatch
      
      Changes since v1:
      * Remove forward declarations - danvet
      * Move "Branch device and port refcounting" section from documentation
        into kernel-doc comments - danvet
      * Export internal topology lifetime functions into their own section in
        the kernel-docs - danvet
      * s/@/&/g for struct references in kernel-docs - danvet
      * Drop the "when they are no longer being used" bits from the kernel
        docs - danvet
      * Modify diagrams to show how the DRM driver interacts with the topology
        and payloads - danvet
      * Make suggested documentation changes for
        drm_dp_mst_topology_get_mstb() and drm_dp_mst_topology_get_port() -
        danvet
      * Better explain the relationship between malloc refs and topology krefs
        in the documentation for drm_dp_mst_topology_get_port() and
        drm_dp_mst_topology_get_mstb() - danvet
      * Fix "See also" in drm_dp_mst_topology_get_mstb() - danvet
      * Rename drm_dp_mst_topology_get_(port|mstb)() ->
        drm_dp_mst_topology_try_get_(port|mstb)() and
        drm_dp_mst_topology_ref_(port|mstb)() ->
        drm_dp_mst_topology_get_(port|mstb)() - danvet
      * s/should/must in docs - danvet
      * WARN_ON(refcount == 0) in topology_get_(mstb|port) - danvet
      * Move kdocs for mstb/port structs inline - danvet
      * Split drm_dp_get_last_connected_port_and_mstb() changes into their own
        commit - danvet
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Reviewed-by: default avatarHarry Wentland <harry.wentland@amd.com>
      Reviewed-by: default avatarDaniel Vetter <daniel@ffwll.ch>
      Cc: David Airlie <airlied@redhat.com>
      Cc: Jerry Zuo <Jerry.Zuo@amd.com>
      Cc: Juston Li <juston.li@intel.com>
      Link: https://patchwork.freedesktop.org/patch/msgid/20190111005343.17443-7-lyude@redhat.com
      ebcc0e6b