- 25 Feb, 2016 40 commits
-
-
Dan Carpenter authored
commit b1d353ad upstream. "count" is controlled by the user and it can be negative. Let's prevent that by making it unsigned. You have to have CAP_SYS_RAWIO to call this function so the bug is not as serious as it could be. Fixes: 5369c02d ('intel_scu_ipc: Utility driver for intel scu ipc') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit d7ce3692 upstream. Some servers experienced fatal deadlocks because of a combination of bugs, leading to multiple cpus calling dump_stack(). The checksumming bug was fixed in commit 34ae6a1a ("ipv6: update skb->csum when CE mark is propagated"). The second problem is a faulty locking in dump_stack() CPU1 runs in process context and calls dump_stack(), grabs dump_lock. CPU2 receives a TCP packet under softirq, grabs socket spinlock, and call dump_stack() from netdev_rx_csum_fault(). dump_stack() spins on atomic_cmpxchg(&dump_lock, -1, 2), since dump_lock is owned by CPU1 While dumping its stack, CPU1 is interrupted by a softirq, and happens to process a packet for the TCP socket locked by CPU2. CPU1 spins forever in spin_lock() : deadlock Stack trace on CPU1 looked like : NMI backtrace for cpu 1 RIP: _raw_spin_lock+0x25/0x30 ... Call Trace: <IRQ> tcp_v6_rcv+0x243/0x620 ip6_input_finish+0x11f/0x330 ip6_input+0x38/0x40 ip6_rcv_finish+0x3c/0x90 ipv6_rcv+0x2a9/0x500 process_backlog+0x461/0xaa0 net_rx_action+0x147/0x430 __do_softirq+0x167/0x2d0 call_softirq+0x1c/0x30 do_softirq+0x3f/0x80 irq_exit+0x6e/0xc0 smp_call_function_single_interrupt+0x35/0x40 call_function_single_interrupt+0x6a/0x70 <EOI> printk+0x4d/0x4f printk_address+0x31/0x33 print_trace_address+0x33/0x3c print_context_stack+0x7f/0x119 dump_trace+0x26b/0x28e show_trace_log_lvl+0x4f/0x5c show_stack_log_lvl+0x104/0x113 show_stack+0x42/0x44 dump_stack+0x46/0x58 netdev_rx_csum_fault+0x38/0x3c __skb_checksum_complete_head+0x6e/0x80 __skb_checksum_complete+0x11/0x20 tcp_rcv_established+0x2bd5/0x2fd0 tcp_v6_do_rcv+0x13c/0x620 sk_backlog_rcv+0x15/0x30 release_sock+0xd2/0x150 tcp_recvmsg+0x1c1/0xfc0 inet_recvmsg+0x7d/0x90 sock_recvmsg+0xaf/0xe0 ___sys_recvmsg+0x111/0x3b0 SyS_recvmsg+0x5c/0xb0 system_call_fastpath+0x16/0x1b Fixes: b58d9774 ("dump_stack: serialize the output from dump_stack()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Alex Thorlton <athorlton@sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 73204282 upstream. Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by:
-
Matthew Wilcox authored
commit 46437f9a upstream. If the indirect_ptr bit is set on a slot, that indicates we need to redo the lookup. Introduce a new function radix_tree_iter_retry() which forces the loop to retry the lookup by setting 'slot' to NULL and turning the iterator back to point at the problematic entry. This is a pretty rare problem to hit at the moment; the lookup has to race with a grow of the radix tree from a height of 0. The consequences of hitting this race are that gang lookup could return a pointer to a radix_tree_node instead of a pointer to whatever the user had inserted in the tree. Fixes: cebbd29e ("radix-tree: rewrite gang lookup using iterator") Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
-
Martijn Coenen authored
commit 6611d8d7 upstream. A spare array holding mem cgroup threshold events is kept around to make sure we can always safely deregister an event and have an array to store the new set of events in. In the scenario where we're going from 1 to 0 registered events, the pointer to the primary array containing 1 event is copied to the spare slot, and then the spare slot is freed because no events are left. However, it is freed before calling synchronize_rcu(), which means readers may still be accessing threshold->primary after it is freed. Fixed by only freeing after synchronize_rcu(). Signed-off-by:
Martijn Coenen <maco@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Signed-off-by:
-
Sergey Senozhatsky authored
commit 72214a24 upstream. In Python3+ print is a function so the old syntax is not correct anymore: $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old File "./scripts/bloat-o-meter", line 61 print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \ ^ SyntaxError: invalid syntax Fix by calling print as a function. Tested on python 2.7.11, 3.5.1 Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Laura Abbott authored
commit ea535e41 upstream. In include/asm-generic/sections.h: /* * Usage guidelines: * _text, _data: architecture specific, don't use them in * arch-independent code * [_stext, _etext]: contains .text.* sections, may also contain * .rodata.* * and/or .init.* sections _text is not guaranteed across architectures. Architectures such as ARM may reuse parts which are not actually text and erroneously trigger a bug. Switch to using _stext which is guaranteed to contain text sections. Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Daniel Mentz authored
commit 0354aec1 upstream. dma-debug uses struct dma_debug_entry to keep track of dma coherent memory allocation requests. The virtual address is converted into a pfn and an offset. Previously, the offset was calculated using an incorrect bit mask. As a result, we saw incorrect error messages from dma-debug like the following: "DMA-API: exceeded 7 overlapping mappings of cacheline 0x03e00000" Cacheline 0x03e00000 does not exist on our platform. Fixes: 0abdd7a8 ("dma-debug: introduce debug_dma_assert_idle()") Signed-off-by:
Daniel Mentz <danielmentz@google.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Sudip Mukherjee authored
commit 601f1db6 upstream. The build of m32104ut_defconfig for m32r arch was failing for long long time with the error: ERROR: "memory_start" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [drivers/scsi/sg.ko] undefined! ERROR: "memory_start" [drivers/scsi/sg.ko] undefined! ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined! ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined! As done in other architectures export the symbols to fix the error. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Mathias Nyman authored
commit 5c821711 upstream. xhci driver frees data for all devices, both usb2 and and usb3 the first time usb_remove_hcd() is called, including td_list and and xhci_ring structures. When usb_remove_hcd() is called a second time for the second xhci bus it will try to dequeue all pending urbs, and touches td_list which is already freed for that endpoint. Reported-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Andrew Banman authored
commit 5f0f2887 upstream. test_pages_in_a_zone() does not account for the possibility of missing sections in the given pfn range. pfn_valid_within always returns 1 when CONFIG_HOLES_IN_ZONE is not set, allowing invalid pfns from missing sections to pass the test, leading to a kernel oops. Wrap an additional pfn loop with PAGES_PER_SECTION granularity to check for missing sections before proceeding into the zone-check code. This also prevents a crash from offlining memory devices with missing sections. Despite this, it may be a good idea to keep the related patch '[PATCH 3/3] drivers: memory: prohibit offlining of memory blocks with missing sections' because missing sections in a memory block may lead to other problems not covered by the scope of this fix. Signed-off-by:
Andrew Banman <abanman@sgi.com> Acked-by:
Alex Thorlton <athorlton@sgi.com> Cc: Russ Anderson <rja@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by:
-
CQ Tang authored
commit fda3bec1 upstream. This is a 32-bit register. Apparently harmless on real hardware, but causing justified warnings in simulation. Signed-off-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Aurélien Francillon authored
commit dd0d0d4d upstream. Without i8042.nomux=1 the Elantech touch pad is not working at all on a Fujitsu Lifebook U745. This patch does not seem necessary for all U745 (maybe because of different BIOS versions?). However, it was verified that the patch does not break those (see opensuse bug 883192: https://bugzilla.opensuse.org/show_bug.cgi?id=883192). Signed-off-by:
Aurélien Francillon <aurelien@francillon.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Benjamin Tissoires authored
commit 6544a1df upstream. When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d1 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 60603950 upstream. Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Naoya Horiguchi authored
commit d96b339f upstream. I saw the following BUG_ON triggered in a testcase where a process calls madvise(MADV_SOFT_OFFLINE) on thps, along with a background process that calls migratepages command repeatedly (doing ping-pong among different NUMA nodes) for the first process: Soft offlining page 0x60000 at 0x700000600000 __get_any_page: 0x60000 free buddy page page:ffffea0001800000 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x1fffc0000000000() page dumped because: VM_BUG_ON_PAGE(atomic_read(&page->_count) == 0) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/include/linux/mm.h:342! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: cfg80211 rfkill crc32c_intel serio_raw virtio_balloon i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi CPU: 3 PID: 3035 Comm: test_alloc_gene Tainted: G O 4.4.0-rc8-v4.4-rc8-160107-1501-00000-rc8+ #74 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c63d5c0 ti: ffff88007c210000 task.ti: ffff88007c210000 RIP: 0010:[<ffffffff8118998c>] [<ffffffff8118998c>] put_page+0x5c/0x60 RSP: 0018:ffff88007c213e00 EFLAGS: 00010246 Call Trace: put_hwpoison_page+0x4e/0x80 soft_offline_page+0x501/0x520 SyS_madvise+0x6bc/0x6f0 entry_SYSCALL_64_fastpath+0x12/0x6a Code: 8b fc ff ff 5b 5d c3 48 89 df e8 b0 fa ff ff 48 89 df 31 f6 e8 c6 7d ff ff 5b 5d c3 48 c7 c6 08 54 a2 81 48 89 df e8 a4 c5 01 00 <0f> 0b 66 90 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b 47 RIP [<ffffffff8118998c>] put_page+0x5c/0x60 RSP <ffff88007c213e00> The root cause resides in get_any_page() which retries to get a refcount of the page to be soft-offlined. This function calls put_hwpoison_page(), expecting that the target page is putback to LRU list. But it can be also freed to buddy. So the second check need to care about such case. Fixes: af8fae7c ("mm/memory-failure.c: clean up soft_offline_page()") Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Roman Gushchin authored
commit 3ca8138f upstream. I got a report about unkillable task eating CPU. Further investigation shows, that the problem is in the fuse_fill_write_pages() function. If iov's first segment has zero length, we get an infinite loop, because we never reach iov_iter_advance() call. Fix this by calling iov_iter_advance() before repeating an attempt to copy data from userspace. A similar problem is described in 124d3b70 ("fix writev regression: pan hanging unkillable and un-straceable"). If zero-length segmend is followed by segment with invalid address, iov_iter_fault_in_readable() checks only first segment (zero-length), iov_iter_copy_from_user_atomic() skips it, fails at second and returns zero -> goto again without skipping zero-length segment. Patch calls iov_iter_advance() before goto again: we'll skip zero-length segment at second iteraction and iov_iter_fault_in_readable() will detect invalid address. Special thanks to Konstantin Khlebnikov, who helped a lot with the commit description. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Maxim Patlasov <mpatlasov@parallels.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Roman Gushchin <klamm@yandex-team.ru> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Fixes: ea9b9907 ("fuse: implement perform_write") Signed-off-by:
-
Thomas Huth authored
commit 760a7364 upstream. In the old DABR register, the BT (Breakpoint Translation) bit is bit number 61. In the new DAWRX register, the WT (Watchpoint Translation) bit is bit number 59. So to move the DABR-BT bit into the position of the DAWRX-WT bit, it has to be shifted by two, not only by one. This fixes hardware watchpoints in gdb of older guests that only use the H_SET_DABR/X interface instead of the new H_SET_MODE interface. Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
Laurent Vivier <lvivier@redhat.com> Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Linus Walleij authored
commit 5070fb14 upstream. When trying to set the ICST 307 clock to 25174000 Hz I ran into this arithmetic error: the icst_hz_to_vco() correctly figure out DIVIDE=2, RDW=100 and VDW=99 yielding a frequency of 25174000 Hz out of the VCO. (I replicated the icst_hz() function in a spreadsheet to verify this.) However, when I called icst_hz() on these VCO settings it would instead return 4122709 Hz. This causes an error in the common clock driver for ICST as the common clock framework will call .round_rate() on the clock which will utilize icst_hz_to_vco() followed by icst_hz() suggesting the erroneous frequency, and then the clock gets set to this. The error did not manifest in the old clock framework since this high frequency was only used by the CLCD, which calls clk_set_rate() without first calling clk_round_rate() and since the old clock framework would not call clk_round_rate() before setting the frequency, the correct values propagated into the VCO. After some experimenting I figured out that it was due to a simple arithmetic overflow: the divisor for 24Mhz reference frequency as reference becomes 24000000*2*(99+8)=0x132212400 and the "1" in bit 32 overflows and is lost. But introducing an explicit 64-by-32 bit do_div() and casting the divisor into (u64) we get the right frequency back, and the right frequency gets set. Tested on the ARM Versatile. Cc: linux-clk@vger.kernel.org Cc: Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Linus Walleij authored
commit e972c374 upstream. Since the dawn of time the ICST code has only supported divide by one or hang in an eternal loop. Luckily we were always dividing by one because the reference frequency for the systems using the ICSTs is 24MHz and the [min,max] values for the PLL input if [10,320] MHz for ICST307 and [6,200] for ICST525, so the loop will always terminate immediately without assigning any divisor for the reference frequency. But for the code to make sense, let's insert the missing i++ Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Anson Huang authored
commit fa0708b3 upstream. In cpu_v7_do_suspend routine, r11 is used while it is NOT saved/restored, different compiler may have different usage of ARM general registers, so it may cause issues during calling cpu_v7_do_suspend. We meet kernel fault occurs when using GCC 4.8.3, r11 contains valid value before calling into cpu_v7_do_suspend, but when returned from this routine, r11 is corrupted and lead to kernel fault. Doing save/restore for those corrupted registers is a must in assemble code. Signed-off-by:
Anson Huang <Anson.Huang@freescale.com> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
-
Helmut Klein authored
commit 5442f0ea upstream. The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi" addressed the wrong uart (0 = console). This patch changes the address to select uart 1, which is the uart connected to the pic microcontroller, which can switch the device off. Signed-off-by:
Helmut Klein <hgkr.klein@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 4350a47b ("ARM: Kirkwood: Make use of the QNAP Power off driver.") Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Andrew Gabbasov authored
commit bb00c898 upstream. If a name contains at least some characters with Unicode values exceeding single byte, the CS0 output should have 2 bytes per character. And if other input characters have single byte Unicode values, then the single input byte is converted to 2 output bytes, and the length of output becomes larger than the length of input. And if the input name is long enough, the output length may exceed the allocated buffer length. All this means that conversion from UTF8 or NLS to CS0 requires checking of output length in order to stop when it exceeds the given output buffer size. [JK: Make code return -ENAMETOOLONG instead of silently truncating the name] Signed-off-by:
Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Andrew Gabbasov authored
commit ad402b26 upstream. udf_CS0toUTF8 function stops the conversion when the output buffer length reaches UDF_NAME_LEN-2, which is correct maximum name length, but, when checking, it leaves the space for a single byte only, while multi-bytes output characters can take more space, causing buffer overflow. Similar error exists in udf_CS0toNLS function, that restricts the output length to UDF_NAME_LEN, while actual maximum allowed length is UDF_NAME_LEN-2. In these cases the output can override not only the current buffer length field, causing corruption of the name buffer itself, but also following allocation structures, causing kernel crash. Adjust the output length checks in both functions to prevent buffer overruns in case of multi-bytes UTF8 or NLS characters. Signed-off-by:
-
Vegard Nossum authored
commit b0918d9f upstream. udf_next_aext() just follows extent pointers while extents are marked as indirect. This can loop forever for corrupted filesystem. Limit number the of indirect extents we are willing to follow in a row. [JK: Updated changelog, limit, style] Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Cc: Jan Kara <jack@suse.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Elble authored
commit 361cad3c upstream. We've seen this in a packet capture - I've intermixed what I think was going on. The fix here is to grab the so_lock sooner. 1964379 -> #1 open (for write) reply seqid=1 1964393 -> #2 open (for read) reply seqid=2 __nfs4_close(), state->n_wronly-- nfs4_state_set_mode_locked(), changes state->state = [R] state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 1964398 -> #3 open (for write) call -> because close is already running 1964399 -> downgrade (to read) call seqid=2 (close of #1) 1964402 -> #3 open (for write) reply seqid=3 __update_open_stateid() nfs_set_open_stateid_locked(), changes state->flags state->flags is [RW] state->state is [R], state->n_wronly == 0, state->n_rdonly == 1 new sequence number is exposed now via nfs4_stateid_copy() next step would be update_open_stateflags(), pending so_lock 1964403 -> downgrade reply seqid=2, fails with OLD_STATEID (close of #1) nfs4_close_prepare() gets so_lock and recalcs flags -> send close 1964405 -> downgrade (to read) call seqid=3 (close of #1 retry) __update_open_stateid() gets so_lock * update_open_stateflags() updates state->n_wronly. nfs4_state_set_mode_locked() updates state->state state->flags is [RW] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 * should have suppressed the preceding nfs4_close_prepare() from sending open_downgrade 1964406 -> write call 1964408 -> downgrade (to read) reply seqid=4 (close of #1 retry) nfs_clear_open_stateid_locked() state->flags is [R] state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1 1964409 -> write reply (fails, openmode) Signed-off-by:
Andrew Elble <aweits@rit.edu> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Anton Protopopov authored
commit 4b550af5 upstream. The setup_ntlmv2_rsp() function may return positive value ENOMEM instead of -ENOMEM in case of kmalloc failure. Signed-off-by:
Anton Protopopov <a.s.protopopov@gmail.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Vasily Averin authored
commit 01b9b0b2 upstream. In some cases tmp_bug can be not filled in cifs_filldir and stay uninitialized, therefore its printk with "%s" modifier can leak content of kernelspace memory. If old content of this buffer does not contain '\0' access bejond end of allocated object can crash the host. Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Steve French <sfrench@localhost.localdomain> Signed-off-by:
-
Yong Li authored
commit 97a249e9 upstream. Without this change, the name entity for mcp4725 is missing in /sys/bus/iio/devices/iio\:device*/name With this change, name is reported correctly Signed-off-by:
Yong Li <sdliyong@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Lars-Peter Clausen authored
commit d590faf9 upstream. The SPI tx and rx buffers are both supposed to be scan_bytes amount of bytes large and a common allocation is used to allocate both buffers. This puts the beginning of the tx buffer scan_bytes bytes after the rx buffer. The initialization of the tx buffer pointer is done adding scan_bytes to the beginning of the rx buffer, but since the rx buffer is of type __be16 this will actually add two times as much and the tx buffer ends up pointing after the allocated buffer. Fix this by using scan_count, which is scan_bytes / 2, instead of scan_bytes when initializing the tx buffer pointer. Fixes: aacff892 ("staging:iio:adis: Preallocate transfer message") Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Dan Carpenter authored
commit 231bfe53 upstream. WARN_ON() only takes a condition argument. I have changed these to WARN() instead. Signed-off-by:
-
Lars-Peter Clausen authored
commit 5dcbe97b upstream. The ad5629/ad5669 are the I2C variant of the ad5628/ad5668, which has a SPI interface. They are mostly identical with the exception that the shift factor is different. Currently the driver does not take care of this difference which leads to incorrect DAC output values. Fix this by introducing a custom channel spec for the ad5629/ad5669 with the correct shift factor. Fixes: commit 6a17a076 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by:
-
Michael Hennerich authored
commit 03fe472e upstream. i2c_master_send() returns the number of bytes transferred on success while the ad5064 driver expects that the write() callback returns 0 on success. Fix that by translating any non negative return value of i2c_master_send() to 0. Fixes: commit 6a17a076 ("iio:dac:ad5064: Add support for the ad5629r and ad5669r") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Vladimir Zapolskiy authored
commit 01bb70ae upstream. If common clock framework is configured, the driver generates a warning, which is fixed by this change: root@devkit3250:~# cat /sys/bus/iio/devices/iio\:device0/in_voltage0_raw ------------[ cut here ]------------ WARNING: CPU: 0 PID: 724 at drivers/clk/clk.c:727 clk_core_enable+0x2c/0xa4() Modules linked in: sc16is7xx snd_soc_uda1380 CPU: 0 PID: 724 Comm: cat Not tainted 4.3.0-rc2+ #198 Hardware name: LPC32XX SoC (Flattened Device Tree) Backtrace: [<>] (dump_backtrace) from [<>] (show_stack+0x18/0x1c) [<>] (show_stack) from [<>] (dump_stack+0x20/0x28) [<>] (dump_stack) from [<>] (warn_slowpath_common+0x90/0xb8) [<>] (warn_slowpath_common) from [<>] (warn_slowpath_null+0x24/0x2c) [<>] (warn_slowpath_null) from [<>] (clk_core_enable+0x2c/0xa4) [<>] (clk_core_enable) from [<>] (clk_enable+0x24/0x38) [<>] (clk_enable) from [<>] (lpc32xx_read_raw+0x38/0x80) [<>] (lpc32xx_read_raw) from [<>] (iio_read_channel_info+0x70/0x94) [<>] (iio_read_channel_info) from [<>] (dev_attr_show+0x28/0x4c) [<>] (dev_attr_show) from [<>] (sysfs_kf_seq_show+0x8c/0xf0) [<>] (sysfs_kf_seq_show) from [<>] (kernfs_seq_show+0x2c/0x30) [<>] (kernfs_seq_show) from [<>] (seq_read+0x1c8/0x440) [<>] (seq_read) from [<>] (kernfs_fop_read+0x38/0x170) [<>] (kernfs_fop_read) from [<>] (do_readv_writev+0x16c/0x238) [<>] (do_readv_writev) from [<>] (vfs_readv+0x50/0x58) [<>] (vfs_readv) from [<>] (default_file_splice_read+0x1a4/0x308) [<>] (default_file_splice_read) from [<>] (do_splice_to+0x78/0x84) [<>] (do_splice_to) from [<>] (splice_direct_to_actor+0xc8/0x1cc) [<>] (splice_direct_to_actor) from [<>] (do_splice_direct+0xa0/0xb8) [<>] (do_splice_direct) from [<>] (do_sendfile+0x1a8/0x30c) [<>] (do_sendfile) from [<>] (SyS_sendfile64+0x104/0x10c) [<>] (SyS_sendfile64) from [<>] (ret_fast_syscall+0x0/0x38) Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit 785171fd upstream. While the datasheet for the AD7785 lists 0xXB as the product ID the actual product ID is 0xX3. Fix the product ID otherwise the driver will reject the device due to non matching IDs. Fixes: e786cc26 ("staging:iio:ad7793: Implement stricter id checking") Signed-off-by:
-
James Bottomley authored
commit 90a88d6e upstream. This softlockup is currently happening: [ 444.088002] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/1:1:29] [ 444.088002] Modules linked in: lpfc(-) qla2x00tgt(O) qla2xxx_scst(O) scst_vdisk(O) scsi_transport_fc libcrc32c scst(O) dlm configfs nfsd lockd grace nfs_acl auth_rpcgss sunrpc ed d snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device dm_mod iTCO_wdt snd_hda_codec_realtek snd_hda_codec_generic gpio_ich iTCO_vendor_support ppdev snd_hda_intel snd_hda_codec snd_hda _core snd_hwdep tg3 snd_pcm snd_timer libphy lpc_ich parport_pc ptp acpi_cpufreq snd pps_core fjes parport i2c_i801 ehci_pci tpm_tis tpm sr_mod cdrom soundcore floppy hwmon sg 8250_ fintek pcspkr i915 drm_kms_helper uhci_hcd ehci_hcd drm fb_sys_fops sysimgblt sysfillrect syscopyarea i2c_algo_bit usbcore button video usb_common fan ata_generic ata_piix libata th ermal [ 444.088002] CPU: 1 PID: 29 Comm: kworker/1:1 Tainted: G O 4.4.0-rc5-2.g1e923a3-default #1 [ 444.088002] Hardware name: FUJITSU SIEMENS ESPRIMO E /D2164-A1, BIOS 5.00 R1.10.2164.A1 05/08/2006 [ 444.088002] Workqueue: fc_wq_4 fc_rport_final_delete [scsi_transport_fc] [ 444.088002] task: f6266ec0 ti: f6268000 task.ti: f6268000 [ 444.088002] EIP: 0060:[<c07e7044>] EFLAGS: 00000286 CPU: 1 [ 444.088002] EIP is at _raw_spin_unlock_irqrestore+0x14/0x20 [ 444.088002] EAX: 00000286 EBX: f20d3800 ECX: 00000002 EDX: 00000286 [ 444.088002] ESI: f50ba800 EDI: f2146848 EBP: f6269ec8 ESP: f6269ec8 [ 444.088002] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 444.088002] CR0: 8005003b CR2: 08f96600 CR3: 363ae000 CR4: 000006d0 [ 444.088002] Stack: [ 444.088002] f6269eec c066b0f7 00000286 f2146848 f50ba808 f50ba800 f50ba800 f2146a90 [ 444.088002] f2146848 f6269f08 f8f0a4ed f3141000 f2146800 f2146a90 f619fa00 00000040 [ 444.088002] f6269f40 c026cb25 00000001 166c6392 00000061 f6757140 f6136340 00000004 [ 444.088002] Call Trace: [ 444.088002] [<c066b0f7>] scsi_remove_target+0x167/0x1c0 [ 444.088002] [<f8f0a4ed>] fc_rport_final_delete+0x9d/0x1e0 [scsi_transport_fc] [ 444.088002] [<c026cb25>] process_one_work+0x155/0x3e0 [ 444.088002] [<c026cde7>] worker_thread+0x37/0x490 [ 444.088002] [<c027214b>] kthread+0x9b/0xb0 [ 444.088002] [<c07e72c1>] ret_from_kernel_thread+0x21/0x40 What appears to be happening is that something has pinned the target so it can't go into STARGET_DEL via final release and the loop in scsi_remove_target spins endlessly until that happens. The fix for this soft lockup is to not keep looping over a device that we've called remove on but which hasn't gone into DEL state. This patch will retain a simplistic memory of the last target and not keep looping over it. Reported-by:
Sebastian Herbszt <herbszt@gmx.de> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Mika Westerberg authored
commit 82c43310 upstream. I have a Marvell 88SE9230 SATA Controller that has some sort of integrated console SCSI device attached to one of the ports. ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66 ata14.00: configured for UDMA/66 scsi 13:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 Sending it VPD INQUIRY command seem to always fail with following error: ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link This has been minor annoyance (only error printed on dmesg) until commit 09e2b0b1 ("scsi: rescan VPD attributes") added call to scsi_attach_vpd() in scsi_rescan_device(). The commit causes the system to splat out following errors continuously without ever reaching the UI: ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 6 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) ata14: hard resetting link ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: configured for UDMA/66 ata14: EH complete ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata14.00: irq_stat 0x40000001 ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 7 dma 16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) Without in-depth understanding of SCSI layer and the Marvell controller, I suspect this happens because when the link goes down (because of an error) we schedule scsi_rescan_device() which again fails to read VPD data... ad infinitum. Since VPD data cannot be read from the device anyway we prevent the SCSI layer from even trying by blacklisting the device. This gets away the error and the system starts up normally. [mkp: Widened the match to all revisions of this device] Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reported-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hannes Reinecke authored
commit d2d06d4f upstream. If MODE SELECT returns with sense '05/91/36' (command lock violation) it should always be retried without counting the number of retries. During an HBA upgrade or similar circumstances one might see a flood of MODE SELECT command from various HBAs, which will easily trigger the sense code and exceed the retry count. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Kirill A. Shutemov authored
commit 461c7fa1 upstream. Reduced testcase: #include <fcntl.h> #include <unistd.h> #include <sys/mman.h> #include <numaif.h> #define SIZE 0x2000 int main() { int fd; void *p; fd = open("/dev/sg0", O_RDWR); p = mmap(NULL, SIZE, PROT_EXEC, MAP_PRIVATE | MAP_LOCKED, fd, 0); mbind(p, SIZE, 0, NULL, 0, MPOL_MF_MOVE); return 0; } We shouldn't try to migrate pages in sg VMA as we don't have a way to update Sg_scatter_hold::pages accordingly from mm core. Let's mark the VMA as VM_IO to indicate to mm core that the VMA is not migratable. Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: David Rientjes <rientjes@google.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Shiraz Hashim <shashim@codeaurora.org> Cc: Hugh Dickins <hughd@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: syzkaller <syzkaller@googlegroups.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Alan Stern authored
commit 13b43891 upstream. Runtime suspend during driver probe and removal can cause problems. The driver's runtime_suspend or runtime_resume callbacks may invoked before the driver has finished binding to the device or after the driver has unbound from the device. This problem shows up with the sd and sr drivers, and can cause disk or CD/DVD drives to become unusable as a result. The fix is simple. The drivers store a pointer to the scsi_disk or scsi_cd structure as their private device data when probing is finished, so we simply have to be sure to clear the private data during removal and test it during runtime suspend/resume. This fixes <https://bugs.debian.org/801925>. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Paul Menzel <paul.menzel@giantmonkey.de> Reported-by:
Erich Schubert <erich@debian.org> Reported-by:
Alexandre Rossi <alexandre.rossi@gmail.com> Tested-by:
-
