- 08 Jan, 2018 35 commits
-
-
Zhu Yanjun authored
In xmit, there is a skb_clone. This function copies the struct sk_buff. And some parameters are changed to the new skb. Then the new skb is sent while the old skb is freed. While the function skb_clone is removed, the parameter changes are made on the old skb, then the old skb is sent. It can also work well. The following tests are made. server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 1000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 1000 -S 512 The kernel config CONFIG_DEBUG_KMEMLEAK is enabled on both server and client. This test runs for several hours. There is no memory leak and the whole system can work well. As the above network, the following tests are made. Server: ibv_rc_pingpong -d rxe0 -g 1 Client: ibv_rc_pingpong -d rxe0 -g 1 1.1.1.1 The result on Server. Before: 8192000 bytes in 0.88 seconds = 74.36 Mbit/sec 1000 iters in 0.88 seconds = 881.30 usec/iter After: 8192000 bytes in 0.81 seconds = 81.15 Mbit/sec 1000 iters in 0.81 seconds = 807.62 usec/iter The throughput is enhanced and the latency is reduced. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Zhu Yanjun authored
The variable recv_sockets is only used in the file rxe_net.c. So it is better to add static type to it. CC: Srinivas Eeda <srinivas.eeda@oracle.com> CC: Joe Jin <joe.jin@oracle.com> CC: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Doug Ledford authored
Merging in 12 patch series from Bart that required changes in the current for-rc branch in order to apply cleanly. Signed-off-by: -
Bart Van Assche authored
Since all I/O context state changes are already serialized, it is not necessary to protect I/O context state changes with the I/O context spinlock. Hence remove that spinlock. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Bart Van Assche authored
It is not necessary to obtain ioctx->spinlock when reading the ioctx state. Since after removal of this locking only a single line remains, inline the srpt_get_cmd_state() function. Signed-off-by:
-
Bart Van Assche authored
Introduce a function for converting a GUID into an ASCII string. This patch does not change any functionality. Signed-off-by:
-
Bart Van Assche authored
Disabling an SRP target port causes the state of all QPs associated with a port to be changed into IB_QPS_ERR. Avoid that this causes one error message per I/O context to be reported. Signed-off-by:
-
Bart Van Assche authored
At least when running the ib_srpt driver on top of the rdma_rxe driver it is easy to trigger a zero-length write completion in the CH_DISCONNECTED state. Hence make the message that reports this less noisy. Signed-off-by:
-
Bart Van Assche authored
Make the ib_srpt driver use the IPv6 format for GIDs in log messages to improve consistency of this driver with other RDMA kernel drivers. Signed-off-by:
-
Bart Van Assche authored
Verify whether port numbers are in the expected range before using these as an array index. Complain if a port number is out of range. Signed-off-by:
-
Bart Van Assche authored
Since the SRQ event message is only useful for debugging purposes, reduce its severity from "informational" to "debug". Signed-off-by:
-
Bart Van Assche authored
Rename rsp_size into max_rsp_size and SRPT_RQ_SIZE into MAX_SRPT_RQ_SIZE. The new names better reflect the role of this member variable and constant. Since the prefix "srp_" is superfluous in the context of the function that creates an RDMA channel, rename srp_sq_size into sq_size. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that the following command reports any warnings: scripts/kernel-doc -none drivers/infiniband/ulp/srpt/ib_srpt.h Signed-off-by:
-
Bart Van Assche authored
Avoid that warnings about missing parameter descriptions are reported when building with W=1. Signed-off-by:
-
Bart Van Assche authored
Fixes: commit a42d985b ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by:
-
Daniel Jurgens authored
Set the current capability to the max capability. Doing so enables dual port RoCE functionality if supported by the firmware. Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Daniel Jurgens authored
When operating in dual port RoCE mode FW doesn't support steering for raw QPs on the slave port. They still work on the master port, but the user has no way of knowing which port is the master. The capability is reported per device, not per port. Signed-off-by:
-
Daniel Jurgens authored
Route performance query MADs to the correct mlx5_core_dev when using dual port RoCE mode. Signed-off-by:
-
Daniel Jurgens authored
When in dual port mode setting a RoCE GID for any port flows through the master ports mlx5_core_dev. Provide an interface to set the port when sending this command. Signed-off-by:
-
Daniel Jurgens authored
Update the counter interface for multiple ports. Some counter sets always comes from the primary device. Port specific counters should be accessed per mlx5_core_dev not always through the IB master mdev. Signed-off-by:
-
Parav Pandit authored
When there are multiple ports for single IB(RoCE) device, support debugfs entries to be available for each port. Signed-off-by:
-
Daniel Jurgens authored
Port operations must be routed to their native mlx5_core_dev. A multiport RoCE device registers itself as having 2 ports even before a 2nd port is affiliated. If an unaffilated port is queried use capability information from the master port, these values are the same. Signed-off-by:
-
Daniel Jurgens authored
Because mlx5_ib_event can be called from atomic context move event handling onto a workqueue. A mutex lock is required to get the IB device for slave ports, so move event processing onto a work queue. When an IB event is received, check if the mlx5_core_dev is a slave port, if so attempt to get the IB device it's affiliated with. If found process the event for that device, otherwise return. Signed-off-by:
-
Daniel Jurgens authored
When mlx5_ib_add is called determine if the mlx5 core device being added is capable of dual port RoCE operation. If it is, determine whether it is a master device or a slave device using the num_vhca_ports and affiliate_nic_vport_criteria capabilities. If the device is a slave, attempt to find a master device to affiliate it with. Devices that can be affiliated will share a system image guid. If none are found place it on a list of unaffiliated ports. If a master is found bind the port to it by configuring the port affiliation in the NIC vport context. Similarly when mlx5_ib_remove is called determine the port type. If it's a slave port, unaffiliate it from the master device, otherwise just remove it from the unaffiliated port list. The IB device is registered as a multiport device, even if a 2nd port is not available for affiliation. When the 2nd port is affiliated later the GID cache must be refreshed in order to get the default GIDs for the 2nd port in the cache. Export roce_rescan_device to provide a mechanism to refresh the cache after a new port is bound. In a multiport configuration all IB object (QP, MR, PD, etc) related commands should flow through the master mlx5_core_dev, other commands must be sent to the slave port mlx5_core_mdev, an interface is provide to get the correct mdev for non IB object commands. Signed-off-by:
-
Daniel Jurgens authored
When multiple RoCE ports are supported registration for events on multiple netdevs is required. Refactor the event registration and handling to support multiple ports. Signed-off-by:
-
Daniel Jurgens authored
Remove use of the num_ports general capability throughout. The number of ports will be variable in the future, and reported in a different way. Signed-off-by:
-
Daniel Jurgens authored
It always returns 0. Change return type to void. Signed-off-by:
-
Daniel Jurgens authored
Generate a unique 128bit identifier for each host and pass that value to firmware in the INIT_HCA command if it reports the sw_owner_id capability. Each device bound to the mlx5_core driver will have the same software owner ID. In subsequent patches mlx5_core devices will be bound via a new VPort command so that they can operate together under a single InfiniBand device. Only devices that have the same software owner ID can be bound, to prevent traffic intended for one host arriving at another. The INIT_HCA command length was expanded by 128 bits. The command length is provided as an input FW commands. Older FW does not have a problem receiving this command in the new longer form. Signed-off-by:
-
Daniel Jurgens authored
There are two potential problems with the existing implementation. 1. Enable and disable can race after the atomic operations. 2. If a command fails the refcount is left in an inconsistent state. Introduce a lock and perform error checking. Fixes: a6f7d2af ("net/mlx5: Add support for multiple RoCE enable") Signed-off-by:
-
Moni Shoua authored
A DC Target (DCT) QP is represented in the hardware as a unique object. This object is created by CREATE_DCT command and destroyed by DESTROY_DCT command. However, in the driver we describe it as a QP. The hardware command that creates a DCT needs parameters that the verb create_qp() does not provide. Those remaining parameters are provided with the call to the verb modify_qp(). Therefore we delay the actual creation of a DCT in the hardware until the stage of modify_qp() to RTR. A support for query_qp() was added as well. It uses QUERY_DCT command to retrieve the applicable fields. Signed-off-by:
Moni Shoua <monis@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Moni Shoua authored
DC Initiator (DCI) QP is represented like any other QP in the hardware. However, like any other transport QP there are attributes and settings that are special to DCI QP and needs specific attention and care. Make necessary changes to configure DCI QP. Signed-off-by:
-
Moni Shoua authored
The QP type IB_QPT_DRIVER doesn't describe the transport or the service that the QP provides but those are known only to the hardware driver. The actual type of the QP is stored in the hardware driver context (i.e. mlx5_qp) under the field qp_sub_type. Take the real QP type and any extra data that is required to create the QP from the driver channel and modify the QP initial attributes before continuing with create_qp(). Downstream patches from this series will add support for both DCI and DCT driver QPs. Signed-off-by:
-
Moni Shoua authored
Vendors can implement type of QPs that are not described in the InfiniBand specification. To still be able to use the IB/core layer services (e.g. user object management) without tainting this layer with driver proprietary logic, a new QP type is added - IB_QPT_DRIVER. This will be a general QP type that the core layer doesn't know about its true nature. When a command like create_qp() is passed to a hardware driver the extra data that is required is taken from the driver channel. Downstream patches from this series will use that QP type in the mlx5 driver. Signed-off-by:
-
Moni Shoua authored
Enable DC transport in the firmware to provide its functionality. Signed-off-by:
-
Moni Shoua authored
Add a missing command interface to work with a DCT. It includes: creating, destroying and get events for. Signed-off-by:
-
- 05 Jan, 2018 5 commits
-
-
Jonathan Toppins authored
Reporting that a device doesn't support RoCE seems like a valuable piece of information to have when trying to determine why a driver is not binding to a device. Better to report this at info log level instead of requiring a user to enable all debug messages in the driver. Signed-off-by:
Jonathan Toppins <jtoppins@redhat.com> Acked-By:
Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by:
-
Hans Westgaard Ry authored
The cases for FDR/EDR signalling speed, were missing in ib_rate_to_mult and mult_to_ib_rate giving wrong return values when drivers convert static rate to/from inter-packet-delay. Signed-off-by:
Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
-
Jia-Ju Bai authored
i40iw_wait_pe_ready is not called in an interrupt handler nor holding a spinlock. The function mdelay in it can be replaced with msleep, to reduce busy wait. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Kaike Wan authored
This patch adds static trace for RNRNAK timer. Currently the output from hrtimer static trace only shows the addresses of hrtimers in the system and there is no easy way to correlate an RNRNAK timer with its entries in the hrtimer trace. This patch adds the correlation among a QP, its RNRNAK timer, and its entries in the hrtimer trace. This correlation will be enormously helpful when debugging RNRNAK related issues. In addition, this patch cleans up rvt_stop_rnr_timer() to be void while here. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
The get_unit_name() function crafts a string based on the device name and the device unit number. It then stores this in a static variable. This has concurrency issues as can be seen with this log: hfi1 0000:02:00.0: hfi1_1: read_idle_message: read idle message 0x203 hfi1 0000:01:00.0: hfi1_1: read_idle_message: read idle message 0x203 The PCI device ID (0000:02:00.0 vs. 0000:01:00.0) is correct for the message, but the device string hfi1_1 is incorrect (it should be hfi1_0 for the second log message). Remove get_unit_name() function. Instead, use the rvt accessor rvt_get_ibdev_name() to get the IB name string. Clean up any hfi1_early_xx calls that can now use the new path. QIB has the same (qib_get_unit_name()) issue. Updating as necessary. Remove qib_get_unit_name() function. Update log message that has redundant device name. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
-
