Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control patches for the v4.5 series.

  Notably I have a patch to driver core from Stephen Boyd in the pull
  request, this has been ACKed by Greg so it should be OK.  The internal
  API needed some tweaking to allow modular Qualcomm pin controllers.

  There is a bit of development history in here but it should all add up
  nicely and has boiled in linux-next.  For example I merged in v4.4-rc5
  to get rid of some nasty merge conflicts.

  Summary:

   - New drivers:
      - PXA2xx pin controller support
      - Broadcom NSP pin controller support

   - New subdrivers:
      - Samsung EXYNOS5410 support
      - Qualcomm MSM8996 support
      - Qualcomm PM8994 support
      - Qualcomm PM8994 MPP support
      - Allwinner sunxi H3 support
      - Allwinner sunxi A80 support
      - Rockchip RK3228 support

   - Rename the Cygnus pinctrl driver to "iproc" as it is more generic
     than was originally thought.

   - A bunch of Lantiq/Xway updates especially from the OpenWRT people.

   - Several refactorings for the Super-H SH PFC pin controllers.
     Adding SCIF_CLK support.

   - Several fixes to the Atlas 7 driver.

   - Various fixes all over the place"

* tag 'pinctrl-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
  pinctrl: mediatek: Modify pinctrl bindings for mt2701
  Revert "pinctrl: qcom: make PMIC drivers bool"
  pinctrl: qcom: Use platform_irq_count() instead of of_irq_count()
  driver-core: platform: Add platform_irq_count()
  pinctrl: lantiq: 2 pins have the wrong mux list
  pinctrl: qcom: make PMIC drivers bool
  pinctrl: nsp-gpio: forever loop in nsp_gpio_get_strength()
  pinctrl: mediatek: convert to arch_initcall
  pinctrl: bcm2835: Fix memory leak in error path
  pinctrl: mediatek: add missing of_node_put
  pinctrl: rockchip: add missing of_node_put
  pinctrl: sh-pfc: add missing of_node_put
  pinctrl: sirf: add missing of_node_put
  pinctrl-tegra: add missing of_node_put
  pinctrl: sunxi: Add A80 special pin controller
  pinctrl: bcm/cygnys/iproc: fixup rebase issue
  pinctrl: fixup problematic flag
  MAINTAINERS: Add co-maintainer for Renesas Pin Controllers
  pinctrl: sh-pfc: r8a7791: add EtherAVB pin groups
  pinctrl: sh-pfc: r8a7795: Add SATA support
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Optimize boot time by detecting cards simultaneously
   - Make runtime resume default behavior for MMC/SD
   - Enable MMC/SD/SDIO devices to suspend/resume asynchronously
   - Allow more than 8 partitions per card
   - Introduce MMC_CAP2_NO_SDIO to prevent unsupported SDIO commands
   - Support the standard DT wakeup-source property
   - Fix driver strength switching for HS200 and HS400
   - Fix switch command timeout
   - Fix invalid vdd in voltage switch power cycle for SDIO

  MMC host:
   - sdhci: Restore behavior when setting VDD via external regulator
   - sdhci: A couple of changes/fixes related to the dma support
   - sdhci-tegra: Add Tegra210 support
   - sdhci-tegra: Support for UHS-I cards including tuning support
   - sdhci-of-at91: Add PM support
   - sh_mmcif: Rework dma channel handling
   - mvsdio: Delete platform data code path"

* tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc: (52 commits)
  mmc: dw_mmc: remove the unused quirks
  mmc: sdhci-pci: use to_pci_dev()
  mmc: cb710: use to_platform_device()
  mmc: tegra: use correct accessor for misc ctrl register
  mmc: tegra: enable UHS-I modes
  mmc: tegra: implement UHS tuning
  mmc: tegra: disable SPI_MODE_CLKEN
  mmc: tegra: implement module external clock change
  mmc: sdhci: restore behavior when setting VDD via external regulator
  mmc: It is not an error for the card to be removed while suspended
  mmc: block: Allow more than 8 partitions per card
  mmc: core: Optimize boot time by detecting cards simultaneously
  mmc: dw_mmc: use resource_size_t to store physical address
  mmc: core: fix __mmc_switch timeout caused by preempt
  mmc: usdhi6rol0: handle NULL data in timeout
  mmc: of_mmc_spi: Add IRQF_ONESHOT to interrupt flags
  mmc: mediatek: change some dev_err to dev_dbg
  mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously
  mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
  mmc: sdhci: 64-bit DMA actually has 4-byte alignment
  ...

Pull libata updates from Tejun Heo:
 "Mostly low level driver specific changes.

  Two changes are somewhat noteworthy.  First, Dan's patchset to support
  per-port msix interrupt handling for ahci, which was tried last cycle
  but had to be backed out due to a couple issues, is back and seems to
  be working fine.  Second, libata exception handling now uses
  usleep_range() instead of msleep() for sleeps < 20ms which can make
  things snappier in some corner cases"

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: skip debounce delay on link resume
  ata: ahci_brcmstb: disable DIPM support
  ata: ahci_brcmstb: enable support for ALPM
  drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms)
  sata_sx4: correctly handling failed allocation
  ata: ahci_brcmstb: add support for MIPS-based platforms
  ahci: qoriq: Adjust the default register values on ls1021a
  ahci: qoriq: Update the default Rx watermark value
  ahci: qoriq: Adjust the default register values on ls1043a
  ahci: compile out msi/msix infrastructure
  ata: core: fix irq description on AHCI single irq systems
  ata: ahci_brcmstb: remove unused definitions
  ata: ahci_brcmstb: add a quirk for MIPS-based platforms
  ata: ahci_brcmstb: disable NCQ for MIPS-based platforms
  ata: sata_rcar: Remove obsolete platform_device_id entries
  sata_rcar: Add compatible string for r8a7795
  ahci: kill 'intr_status'
  ahci: switch from 'threaded' to 'hardirq' interrupt handling
  ahci: per-port msix support

Pull percpu updates from Tejun Heo:
 "Two trivial percpu patches for v4.5-rc1"

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: remove PERCPU_ENOUGH_ROOM which is stale definition
  percpu: Remove unneeded return from void function

Pull workqueue update from Tejun Heo:
 "Workqueue changes for v4.5.  One cleanup patch and three to improve
  the debuggability.

  Workqueue now has a stall detector which dumps workqueue state if any
  worker pool hasn't made forward progress over a certain amount of time
  (30s by default) and also triggers a warning if a workqueue which can
  be used in memory reclaim path tries to wait on something which can't
  be.

  These should make workqueue hangs a lot easier to debug."

* 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: simplify the apply_workqueue_attrs_locked()
  workqueue: implement lockup detector
  watchdog: introduce touch_softlockup_watchdog_sched()
  workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue

Pull irq updates from Thomas Gleixner:
 "The irq department provides:

   - Support for MSI to wire bridges and a first user of it

   - More ACPI support for ARM/GIC

   - A new TS-4800 interrupt controller driver

   - RCU based free of interrupt descriptors to support the upcoming
     Intel VMD technology without introducing a locking nightmare

   - The usual pile of fixes and updates to drivers and core code"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  irqchip/omap-intc: Add support for spurious irq handling
  irqchip/zevio: Use irq_data_get_chip_type() helper
  irqchip/omap-intc: Remove duplicate setup for IRQ chip type handler
  irqchip/ts4800: Add TS-4800 interrupt controller
  irqchip/ts4800: Add documentation for TS-4800 interrupt controller
  irq/platform-MSI: Increase the maximum MSIs the MSI framework can support
  irqchip/gicv2m: Miscellaneous fixes for v2m resources and SPI ranges
  irqchip/bcm2836: Make code more readable
  irqchip/bcm2836: Tolerate IRQs while no flag is set in ISR
  irqchip/bcm2836: Add SMP support for the 2836
  irqchip/bcm2836: Fix initialization of the LOCAL_IRQ_CNT timers
  irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support
  irqchip/gic-v2m: Refactor to prepare for ACPI support
  irqdomain: Introduce is_fwnode_irqchip helper
  acpi: pci: Setup MSI domain for ACPI based pci devices
  genirq/msi: Export functions to allow MSI domains in modules
  irqchip/mbigen: Implement the mbigen irq chip operation functions
  irqchip/mbigen: Create irq domain for each mbigen device
  irqchip/mgigen: Add platform device driver for mbigen device
  dt-bindings: Documents the mbigen bindings
  ...

Merge branches 'timers-core-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer updates - and a leftover fix - from Thomas Gleixner:
 "A rather large (commit wise) update from the timer side:

   - A bulk update to make compile tests work in the clocksource drivers

   - An overhaul of the h8300 timers

   - Some more Y2038 work

   - A few overflow prevention checks in the timekeeping/ntp code

   - The usual pile of fixes and improvements to the various
     clocksource/clockevent drivers and core code"

Also:
 "A single fix for the posix-clock poll code which did not make it into
  4.4"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
  clocksource/drivers/acpi_pm: Convert to pr_* macros
  clocksource: Make clocksource validation work for all clocksources
  timekeeping: Cap adjustments so they don't exceed the maxadj value
  ntp: Fix second_overflow's input parameter type to be 64bits
  ntp: Change time_reftime to time64_t and utilize 64bit __ktime_get_real_seconds
  timekeeping: Provide internal function __ktime_get_real_seconds
  clocksource/drivers/h8300: Use ioread / iowrite
  clocksource/drivers/h8300: Initializer cleanup.
  clocksource/drivers/h8300: Simplify delta handling
  clocksource/drivers/h8300: Fix timer not overflow case
  clocksource/drivers/h8300: Change to overflow interrupt
  clocksource/drivers/lpc32: Correct pr_err() output format
  clocksource/drivers/arm_global_timer: Fix suspend resume
  clocksource/drivers/pistachio: Fix wrong calculated clocksource read value
  clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_set
  clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writel
  clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path
  clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
  clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_init
  clocksource/drivers/h8300: Increase the compilation test coverage
  ...

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-clock: Fix return code on the poll method's error path

Pull x86 platform updates from Ingo Molnar:
 "Two changes:

   - one to quirk-save/restore certain system MSRs across
     suspend/resume, to make certain Intel systems work better
     (Chen Yu)

   - and also to constify a read only structure (Julia Lawall)"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/calgary: Constify cal_chipset_ops structures
  x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume

Pull x86 mm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - make the debugfs 'kernel_page_tables' file read-only, as it only
     has read ops.  (Borislav Petkov)

   - micro-optimize clflush_cache_range() (Chris Wilson)

   - swiotlb enhancements, which fixes certain KVM emulated devices
     (Igor Mammedov)

   - fix an LDT related debug message (Jan Beulich)

   - modularize CONFIG_X86_PTDUMP (Kees Cook)

   - tone down an overly alarming warning (Laura Abbott)

   - Mark variable __initdata (Rasmus Villemoes)

   - PAT additions (Toshi Kani)"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Micro-optimise clflush_cache_range()
  x86/mm/pat: Change free_memtype() to support shrinking case
  x86/mm/pat: Add untrack_pfn_moved for mremap
  x86/mm: Drop WARN from multi-BAR check
  x86/LDT: Print the real LDT base address
  x86/mm/64: Enable SWIOTLB if system has SRAT memory regions above MAX_DMA32_PFN
  x86/mm: Introduce max_possible_pfn
  x86/mm/ptdump: Make (debugfs)/kernel_page_tables read-only
  x86/mm/mtrr: Mark the 'range_new' static variable in mtrr_calc_range_state() as __initdata
  x86/mm: Turn CONFIG_X86_PTDUMP into a module

Pull x86 fpu updates from Ingo Molnar:
 "This cleans up the FPU fault handling methods to be more robust, and
  moves eligible variables to .init.data"

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Put a few variables in .init.data
  x86/fpu: Get rid of xstate_fault()
  x86/fpu: Add an XSTATE_OP() macro

Pull x86 cpu updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Improved CPU ID handling code and related enhancements (Borislav
     Petkov)

   - RDRAND fix (Len Brown)"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Replace RDRAND forced-reseed with simple sanity check
  x86/MSR: Chop off lower 32-bit value
  x86/cpu: Fix MSR value truncation issue
  x86/cpu/amd, kvm: Satisfy guest kernel reads of IC_CFG MSR
  kvm: Add accessors for guest CPU's family, model, stepping
  x86/cpu: Unify CPU family, model, stepping calculation

Pull x86 cleanups from Ingo Molnar:
 "The main changes in this cycle were:

   - code patching and cpu_has cleanups (Borislav Petkov)

   - paravirt cleanups (Juergen Gross)

   - TSC cleanup (Thomas Gleixner)

   - ptrace cleanup (Chen Gang)"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch/x86/kernel/ptrace.c: Remove unused arg_offs_table
  x86/mm: Align macro defines
  x86/cpu: Provide a config option to disable static_cpu_has
  x86/cpufeature: Remove unused and seldomly used cpu_has_xx macros
  x86/cpufeature: Cleanup get_cpu_cap()
  x86/cpufeature: Move some of the scattered feature bits to x86_capability
  x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_defer
  x86/paravirt: Remove unused pv_apic_ops structure
  x86/tsc: Remove unused tsc_pre_init() hook
  x86: Remove unused function cpu_has_ht_siblings()
  x86/paravirt: Kill some unused patching functions

Pull small x86 boot update from Ingo Molnar:
 "A single update to the MAINTAINERS file"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tboot: Update maintainer list for Intel TXT

Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - vDSO and asm entry improvements (Andy Lutomirski)

   - Xen paravirt entry enhancements (Boris Ostrovsky)

   - asm entry labels enhancement (Borislav Petkov)

   - and other misc changes (Thomas Gleixner, me)"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vsdo: Fix build on PARAVIRT_CLOCK=y, KVM_GUEST=n
  Revert "x86/kvm: On KVM re-enable (e.g. after suspend), update clocks"
  x86/entry/64_compat: Make labels local
  x86/platform/uv: Include clocksource.h for clocksource_touch_watchdog()
  x86/vdso: Enable vdso pvclock access on all vdso variants
  x86/vdso: Remove pvclock fixmap machinery
  x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap
  x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader
  x86/kvm: On KVM re-enable (e.g. after suspend), update clocks
  x86/entry/64: Bypass enter_from_user_mode on non-context-tracking boots
  x86/asm: Add asm macros for static keys/jump labels
  x86/asm: Error out if asm/jump_label.h is included inappropriately
  context_tracking: Switch to new static_branch API
  x86/entry, x86/paravirt: Remove the unused usergs_sysret32 PV op
  x86/paravirt: Remove the unused irq_enable_sysexit pv op
  x86/xen: Avoid fast syscall path for Xen PV guests

Pull x86 apic updates from Ingo Molnar:
 "The main changes in this cycle were:

   - introduce optimized single IPI sending methods on modern APICs
     (Linus Torvalds, Thomas Gleixner)

   - kexec/crash APIC handling fixes and enhancements (Hidehiro Kawai)

   - extend lapic vector saving/restoring to the CMCI (MCE) vector as
     well (Juergen Gross)

   - various fixes and enhancements (Jake Oshins, Len Brown)"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/irq: Export functions to allow MSI domains in modules
  Documentation: Document kernel.panic_on_io_nmi sysctl
  x86/nmi: Save regs in crash dump on external NMI
  x86/apic: Introduce apic_extnmi command line parameter
  kexec: Fix race between panic() and crash_kexec()
  panic, x86: Allow CPUs to save registers even if looping in NMI context
  panic, x86: Fix re-entrance problem due to panic on NMI
  x86/apic: Fix the saving and restoring of lapic vectors during suspend/resume
  x86/smpboot: Re-enable init_udelay=0 by default on modern CPUs
  x86/smp: Remove single IPI wrapper
  x86/apic: Use default send single IPI wrapper
  x86/apic: Provide default send single IPI wrapper
  x86/apic: Implement single IPI for apic_noop
  x86/apic: Wire up single IPI for apic_numachip
  x86/apic: Wire up single IPI for x2apic_uv
  x86/apic: Implement single IPI for x2apic_phys
  x86/apic: Wire up single IPI for bigsmp_apic
  x86/apic: Remove pointless indirections from bigsmp_apic
  x86/apic: Wire up single IPI for apic_physflat
  x86/apic: Remove pointless indirections from apic_physflat
  ...

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - tickless load average calculation enhancements (Byungchul Park)

   - vtime handling enhancements (Frederic Weisbecker)

   - scalability improvement via properly aligning a key structure field
     (Jiri Olsa)

   - various stop_machine() fixes (Oleg Nesterov)

   - sched/numa enhancement (Rik van Riel)

   - various fixes and improvements (Andi Kleen, Dietmar Eggemann,
     Geliang Tang, Hiroshi Shimamoto, Joonwoo Park, Peter Zijlstra,
     Waiman Long, Wanpeng Li, Yuyang Du)"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  sched/fair: Fix new task's load avg removed from source CPU in wake_up_new_task()
  sched/core: Move sched_entity::avg into separate cache line
  x86/fpu: Properly align size in CHECK_MEMBER_AT_END_OF() macro
  sched/deadline: Fix the earliest_dl.next logic
  sched/fair: Disable the task group load_avg update for the root_task_group
  sched/fair: Move the cache-hot 'load_avg' variable into its own cacheline
  sched/fair: Avoid redundant idle_cpu() call in update_sg_lb_stats()
  sched/core: Move the sched_to_prio[] arrays out of line
  sched/cputime: Convert vtime_seqlock to seqcount
  sched/cputime: Introduce vtime accounting check for readers
  sched/cputime: Rename vtime_accounting_enabled() to vtime_accounting_cpu_enabled()
  sched/cputime: Correctly handle task guest time on housekeepers
  sched/cputime: Clarify vtime symbols and document them
  sched/cputime: Remove extra cost in task_cputime()
  sched/fair: Make it possible to account fair load avg consistently
  sched/fair: Modify the comment about lock assumptions in migrate_task_rq_fair()
  stop_machine: Clean up the usage of the preemption counter in cpu_stopper_thread()
  stop_machine: Shift the 'done != NULL' check from cpu_stop_signal_done() to callers
  stop_machine: Kill cpu_stop_done->executed
  stop_machine: Change __stop_cpus() to rely on cpu_stop_queue_work()
  ...

Pull RAS updates from Ingo Molnar:
 "Various x86 MCE fixes and small enhancements"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Make usable address checks Intel-only
  x86/mce: Add the missing memory error check on AMD
  x86/RAS: Remove mce.usable_addr
  x86/mce: Do not enter deferred errors into the generic pool twice

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Intel Knights Landing support.  (Harish Chegondi)

   - Intel Broadwell-EP uncore PMU support.  (Kan Liang)

   - Core code improvements.  (Peter Zijlstra.)

   - Event filter, LBR and PEBS fixes.  (Stephane Eranian)

   - Enable cycles:pp on Intel Atom.  (Stephane Eranian)

   - Add cycles:ppp support for Skylake.  (Andi Kleen)

   - Various x86 NMI overhead optimizations.  (Andi Kleen)

   - Intel PT enhancements.  (Takao Indoh)

   - AMD cache events fix.  (Vince Weaver)

  Tons of tooling changes:

   - Show random perf tool tips in the 'perf report' bottom line
     (Namhyung Kim)

   - perf report now defaults to --group if the perf.data file has
     grouped events, try it with:

      # perf record -e '{cycles,instructions}' -a sleep 1
      [ perf record: Woken up 1 times to write data ]
      [ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ]
      # perf report
      # Samples: 1K of event 'anon group { cycles, instructions }'
      # Event count (approx.): 1955219195
      #
      #       Overhead  Command     Shared Object      Symbol

         2.86%   0.22%  swapper     [kernel.kallsyms]  [k] intel_idle
         1.05%   0.33%  firefox     libxul.so          [.] js::SetObjectElement
         1.05%   0.00%  kworker/0:3 [kernel.kallsyms]  [k] gen6_ring_get_seqno
         0.88%   0.17%  chrome      chrome             [.] 0x0000000000ee27ab
         0.65%   0.86%  firefox     libxul.so          [.] js::ValueToId<(js::AllowGC)1>
         0.64%   0.23%  JS Helper   libxul.so          [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay
         0.62%   1.27%  firefox     libxul.so          [.] js::GetIterator
         0.61%   1.74%  firefox     libxul.so          [.] js::NativeSetProperty
         0.61%   0.31%  firefox     libxul.so          [.] js::SetPropertyByDefining

   - Introduce the 'perf stat record/report' workflow:

     Generate perf.data files from 'perf stat', to tap into the
     scripting capabilities perf has instead of defining a 'perf stat'
     specific scripting support to calculate event ratios, etc.

     Simple example:

        $ perf stat record -e cycles usleep 1

         Performance counter stats for 'usleep 1':

               1,134,996      cycles

             0.000670644 seconds time elapsed

        $ perf stat report

         Performance counter stats for '/home/acme/bin/perf stat record -e cycles usleep 1':

               1,134,996      cycles

             0.000670644 seconds time elapsed

        $

     It generates PERF_RECORD_ userspace records to store the details:

        $ perf report -D | grep PERF_RECORD
        0xf0 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27637
        0x118 [0x12]: PERF_RECORD_CPU_MAP nr: 1 cpu: 65535
        0x12a [0x40]: PERF_RECORD_STAT_CONFIG
        0x16a [0x30]: PERF_RECORD_STAT
        -1 -1 0x19a [0x40]: PERF_RECORD_MMAP -1/0: [0xffffffff81000000(0x1f000000) @ 0xffffffff81000000]: x [kernel.kallsyms]_text
        0x1da [0x18]: PERF_RECORD_STAT_ROUND
        [acme@ssdandy linux]$

     An effort was made to make perf.data files generated like this to
     not generate cryptic messages when processed by older tools.

     The 'perf script' bits need rebasing, will go up later.

   - Make command line options always available, even when they depend
     on some feature being enabled, warning the user about use of such
     options (Wang Nan)

   - Support hw breakpoint events (mem:0xAddress) in the default output
     mode in 'perf script' (Wang Nan)

   - Fixes and improvements for supporting annotating ARM binaries,
     support ARM call and jump instructions, more work needed to have
     arch specific stuff separated into tools/perf/arch/*/annotate/
     (Russell King)

   - Add initial 'perf config' command, for now just with a --list
     command to the contents of the configuration file in use and a
     basic man page describing its format, commands for doing edits and
     detailed documentation are being reviewed and proof-read.  (Taeung
     Song)

   - Allows BPF scriptlets specify arguments to be fetched using DWARF
     info, using a prologue generated at compile/build time (He Kuang,
     Wang Nan)

   - Allow attaching BPF scriptlets to module symbols (Wang Nan)

   - Allow attaching BPF scriptlets to userspace code using uprobe (Wang
     Nan)

   - BPF programs now can specify 'perf probe' tunables via its section
     name, separating key=val values using semicolons (Wang Nan)

     Testing some of these new BPF features:

        Use case: get callchains when receiving SSL packets, filter then in the
                  kernel, at arbitrary place.

        # cat ssl.bpf.c
        #define SEC(NAME) __attribute__((section(NAME), used))

        struct pt_regs;

        SEC("func=__inet_lookup_established hnum")
        int func(struct pt_regs *ctx, int err, unsigned short port)
        {
                return err == 0 && port == 443;
        }

        char _license[] SEC("license") = "GPL";
        int  _version   SEC("version") = LINUX_VERSION_CODE;
        #
        # perf record -a -g -e ssl.bpf.c
        ^C[ perf record: Woken up 1 times to write data ]
        [ perf record: Captured and wrote 0.787 MB perf.data (3 samples) ]
        # perf script | head -30
        swapper     0 [000] 58783.268118: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
           8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
           896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
           8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
           855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
           8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
           8572a8 process_backlog (/lib/modules/4.3.0+/build/vmlinux)
           856b11 net_rx_action (/lib/modules/4.3.0+/build/vmlinux)
           2a284b __do_softirq (/lib/modules/4.3.0+/build/vmlinux)
           2a2ba3 irq_exit (/lib/modules/4.3.0+/build/vmlinux)
           96b7a4 do_IRQ (/lib/modules/4.3.0+/build/vmlinux)
           969807 ret_from_intr (/lib/modules/4.3.0+/build/vmlinux)
           2dede5 cpu_startup_entry (/lib/modules/4.3.0+/build/vmlinux)
           95d5bc rest_init (/lib/modules/4.3.0+/build/vmlinux)
          1163ffa start_kernel ([kernel.vmlinux].init.text)
          11634d7 x86_64_start_reservations ([kernel.vmlinux].init.text)
          1163623 x86_64_start_kernel ([kernel.vmlinux].init.text)

        qemu-system-x86  9178 [003] 58785.792417: perf_bpf_probe:func: (ffffffff816a0f60) hnum=0x1bb
           8a0f61 __inet_lookup_established (/lib/modules/4.3.0+/build/vmlinux)
           896def ip_rcv_finish (/lib/modules/4.3.0+/build/vmlinux)
           8976c2 ip_rcv (/lib/modules/4.3.0+/build/vmlinux)
           855eba __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
           8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
           856660 netif_receive_skb_internal (/lib/modules/4.3.0+/build/vmlinux)
           8566ec netif_receive_skb_sk (/lib/modules/4.3.0+/build/vmlinux)
             430a br_handle_frame_finish ([bridge])
             48bc br_handle_frame ([bridge])
           855f44 __netif_receive_skb_core (/lib/modules/4.3.0+/build/vmlinux)
           8565d8 __netif_receive_skb (/lib/modules/4.3.0+/build/vmlinux)
        #

   - Use 'perf probe' various options to list functions, see what
     variables can be collected at any given point, experiment first
     collecting without a filter, then filter, use it together with
     'perf trace', 'perf top', with or without callchains, if it
     explodes, please tell us!

   - Introduce a new callchain mode: "folded", that will list per line
     representations of all callchains for a give histogram entry,
     facilitating 'perf report' output processing by other tools, such
     as Brendan Gregg's flamegraph tools (Namhyung Kim)

     E.g:

        # perf report | grep -v ^# | head
           18.37%     0.00%  swapper  [kernel.kallsyms]   [k] cpu_startup_entry
                           |
                           ---cpu_startup_entry
                              |
                              |--12.07%--start_secondary
                              |
                               --6.30%--rest_init
                                         start_kernel
                                         x86_64_start_reservations
                                         x86_64_start_kernel
         #

     Becomes, in "folded" mode:

        # perf report -g folded | grep -v ^# | head -5
            18.37%     0.00%  swapper [kernel.kallsyms]   [k] cpu_startup_entry
          12.07% cpu_startup_entry;start_secondary
           6.30% cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
            16.90%     0.00%  swapper [kernel.kallsyms]   [k] call_cpuidle
          11.23% call_cpuidle;cpu_startup_entry;start_secondary
           5.67% call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
            16.90%     0.00%  swapper [kernel.kallsyms]   [k] cpuidle_enter
          11.23% cpuidle_enter;call_cpuidle;cpu_startup_entry;start_secondary
           5.67% cpuidle_enter;call_cpuidle;cpu_startup_entry;rest_init;start_kernel;x86_64_start_reservations;x86_64_start_kernel
            15.12%     0.00%  swapper [kernel.kallsyms]   [k] cpuidle_enter_state
         #

     The user can also select one of "count", "period" or "percent" as
     the first column.

  ... and lots of infrastructure enhancements, plus fixes and other
  changes, features I failed to list - see the shortlog and the git log
  for details"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (271 commits)
  perf evlist: Add --trace-fields option to show trace fields
  perf record: Store data mmaps for dwarf unwind
  perf libdw: Check for mmaps also in MAP__VARIABLE tree
  perf unwind: Check for mmaps also in MAP__VARIABLE tree
  perf unwind: Use find_map function in access_dso_mem
  perf evlist: Remove perf_evlist__(enable|disable)_event functions
  perf evlist: Make perf_evlist__open() open evsels with their cpus and threads (like perf record does)
  perf report: Show random usage tip on the help line
  perf hists: Export a couple of hist functions
  perf diff: Use perf_hpp__register_sort_field interface
  perf tools: Add overhead/overhead_children keys defaults via string
  perf tools: Remove list entry from struct sort_entry
  perf tools: Include all tools/lib directory for tags/cscope/TAGS targets
  perf script: Align event name properly
  perf tools: Add missing headers in perf's MANIFEST
  perf tools: Do not show trace command if it's not compiled in
  perf report: Change default to use event group view
  perf top: Decay periods in callchains
  tools lib: Move bitmap.[ch] from tools/perf/ to tools/{lib,include}/
  tools lib: Sync tools/lib/find_bit.c with the kernel
  ...

Pull locking updates from Ingo Molnar:
 "So we have a laundry list of locking subsystem changes:

   - continuing barrier API and code improvements

   - futex enhancements

   - atomics API improvements

   - pvqspinlock enhancements: in particular lock stealing and adaptive
     spinning

   - qspinlock micro-enhancements"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op
  futex: Cleanup the goto confusion in requeue_pi()
  futex: Remove pointless put_pi_state calls in requeue()
  futex: Document pi_state refcounting in requeue code
  futex: Rename free_pi_state() to put_pi_state()
  futex: Drop refcount if requeue_pi() acquired the rtmutex
  locking/barriers, arch: Remove ambiguous statement in the smp_store_mb() documentation
  lcoking/barriers, arch: Use smp barriers in smp_store_release()
  locking/cmpxchg, arch: Remove tas() definitions
  locking/pvqspinlock: Queue node adaptive spinning
  locking/pvqspinlock: Allow limited lock stealing
  locking/pvqspinlock: Collect slowpath lock statistics
  sched/core, locking: Document Program-Order guarantees
  locking, sched: Introduce smp_cond_acquire() and use it
  locking/pvqspinlock, x86: Optimize the PV unlock code path
  locking/qspinlock: Avoid redundant read of next pointer
  locking/qspinlock: Prefetch the next node cacheline
  locking/qspinlock: Use _acquire/_release() versions of cmpxchg() & xchg()
  atomics: Add test for atomic operations with _relaxed variants

Pull RCU updates from Ingo Molnar:
 "The changes in this cycle were:

   - Adding transitivity uniformly to rcu_node structure ->lock
     acquisitions.  (This is implemented by the first two commits on top
     of v4.4-rc2 due to the pervasive nature of this change.)

   - Documentation updates, including RCU requirements.

   - Expedited grace-period changes.

   - Miscellaneous fixes.

   - Linked-list fixes, courtesy of KTSAN.

   - Torture-test updates.

   - Late-breaking fix to sysrq-generated crash.

  One thing I should note is that these pieces of documentation are
  fairly large files:

    .../RCU/Design/Requirements/Requirements.html      | 2897 ++++++++++++++++++++
    .../RCU/Design/Requirements/Requirements.htmlx     | 2741 ++++++++++++++++++

  and are written in HTML, not the usual .txt style.  I hope they are
  fine"

Paul McKenney explains the html docs:
 "For whatever it is worth, the reason for this unconventional choice
  was that attempts to do the diagrams in ASCII art failed miserably.

  And attempts to do ASCII art for the upcoming documentation of the
  data structures failed even more miserably"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  sysrq: Fix warning in sysrq generated crash.
  list: Add lockless list traversal primitives
  rcu: Make rcu_gp_init() be bool rather than int
  rcu: Move wakeup out from under rnp->lock
  rcu: Fix comment for rcu_dereference_raw_notrace
  rcu: Don't redundantly disable irqs in rcu_irq_{enter,exit}()
  rcu: Make cpu_needs_another_gp() be bool
  rcu: Eliminate unused rcu_init_one() argument
  rcu: Remove TINY_RCU bloat from pointless boot parameters
  torture: Place console.log files correctly from the get-go
  torture: Abbreviate console error dump
  rcutorture: Print symbolic name for ->gp_state
  rcutorture: Print symbolic name for rcu_torture_writer_state
  rcutorture: Remove CONFIG_RCU_USER_QS from rcutorture selftest doc
  rcutorture: Default grace period to three minutes, allow override
  rcutorture:  Dump stack when GP kthread stalls
  rcutorture: Flag nonexistent RCU GP kthread
  rcutorture: Add batch number to script printout
  Documentation/memory-barriers.txt: Fix ACCESS_ONCE thinko
  documentation: Update RCU requirements based on expedited changes
  ...

Pull vfs xattr updates from Al Viro:
 "Andreas' xattr cleanup series.

  It's a followup to his xattr work that went in last cycle; -0.5KLoC"

* 'work.xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  xattr handlers: Simplify list operation
  ocfs2: Replace list xattr handler operations
  nfs: Move call to security_inode_listsecurity into nfs_listxattr
  xfs: Change how listxattr generates synthetic attributes
  tmpfs: listxattr should include POSIX ACL xattrs
  tmpfs: Use xattr handler infrastructure
  btrfs: Use xattr handler infrastructure
  vfs: Distinguish between full xattr names and proper prefixes
  posix acls: Remove duplicate xattr name definitions
  gfs2: Remove gfs2_xattr_acl_chmod
  vfs: Remove vfs_xattr_cmp

Pull vfs RCU symlink updates from Al Viro:
 "Replacement of ->follow_link/->put_link, allowing to stay in RCU mode
  even if the symlink is not an embedded one.

  No changes since the mailbomb on Jan 1"

* 'work.symlinks' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch ->get_link() to delayed_call, kill ->put_link()
  kill free_page_put_link()
  teach nfs_get_link() to work in RCU mode
  teach proc_self_get_link()/proc_thread_self_get_link() to work in RCU mode
  teach shmem_get_link() to work in RCU mode
  teach page_get_link() to work in RCU mode
  replace ->follow_link() with new method that could stay in RCU mode
  don't put symlink bodies in pagecache into highmem
  namei: page_getlink() and page_follow_link_light() are the same thing
  ufs: get rid of ->setattr() for symlinks
  udf: don't duplicate page_symlink_inode_operations
  logfs: don't duplicate page_symlink_inode_operations
  switch befs long symlinks to page_symlink_operations

Pull vfs compat_ioctl fixes from Al Viro:
 "This is basically Jann's patches from last week.  I have _not_
  included the stuff like switching i2c to ->compat_ioctl() into this
  one - those need more testing.

  Ideally I would like fs/compat_ioctl.c shrunk a lot, but that's a
  separate story"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS)
  compat_ioctl: don't pass fd around when not needed
  compat_ioctl: don't look up the fd twice

Pull SCSI fix from James Bottomley:
 "A single fix for machines with pages > 4k (PPC mostly).

  There's a bug in our optimal transfer size code where we don't account
  for pages > 4k and can set the transfer size to be less than the page
  size causing nasty failures"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  sd: Reject optimal transfer length smaller than page size

Pull PCI fixlet from Bjorn Helgaas:
 "This marks the TI DRA7xx host bridge driver as broken.  Apparently it
  has never worked without some additional out-of-tree code, so I'm
  going to mark it broken now and remove it completely next cycle unless
  it's fixed"

* tag 'pci-v4.4-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: dra7xx: Mark driver as broken

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

New features:

- Allow using trace events fields as sort order keys, making 'perf evlist --trace_fields'
  show those, and then the user can select a subset and use like:

    perf top -e sched:sched_switch -s prev_comm,next_comm

  That works as well in 'perf report' when handling files containing
  tracepoints.

  The default when just tracepoint events are found in a perf.data file is to
  format it like ftrace, using the libtraceevent formatters, plugins, etc (Namhyung Kim)

- Add support in 'perf script' to process 'perf stat record' generated files,
  culminating in a python perf script that calculates CPI (Cycles per
  Instruction) (Jiri Olsa)

- Show random perf tool tips in the 'perf report' bottom line (Namhyung Kim)

- perf report now defaults to --group if the perf.data file has grouped events, try it with:

  # perf record -e '{cycles,instructions}' -a sleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 1.093 MB perf.data (1247 samples) ]
  # perf report
  # Samples: 1K of event 'anon group { cycles, instructions }'
  # Event count (approx.): 1955219195
  #
  #       Overhead  Command     Shared Object      Symbol

     2.86%   0.22%  swapper     [kernel.kallsyms]  [k] intel_idle
     1.05%   0.33%  firefox     libxul.so          [.] js::SetObjectElement
     1.05%   0.00%  kworker/0:3 [kernel.kallsyms]  [k] gen6_ring_get_seqno
     0.88%   0.17%  chrome      chrome             [.] 0x0000000000ee27ab
     0.65%   0.86%  firefox     libxul.so          [.] js::ValueToId<(js::AllowGC)1>
     0.64%   0.23%  JS Helper   libxul.so          [.] js::SplayTree<js::jit::LiveRange*, js::jit::LiveRange>::splay
     0.62%   1.27%  firefox     libxul.so          [.] js::GetIterator
     0.61%   1.74%  firefox     libxul.so          [.] js::NativeSetProperty
     0.61%   0.31%  firefox     libxul.so          [.] js::SetPropertyByDefining

User visible fixes:

- Coect data mmaps so that the DWARF unwinder can handle usecases needing them,
  like softice (Jiri Olsa)

- Decay callchains in fractal mode, fixing up cases where 'perf top -g' would
  show entries with more than 100% (Namhyung Kim)

Infrastructure changes:

- Sync tools/lib with the lib/ in the kernel sources for find_bit.c and
  move bitmap.[ch] from tools/perf/util/ to tools/lib/ (Arnaldo Carvalho de Melo)

- No need to set attr.sample_freq in some 'perf test' entries that only
  want to deal with PERF_RECORD_ meta-events, improve a bit error output
  for CQM test (Arnaldo Carvalho de Melo)

- Fix python binding build, adding some missing object files now required
  due to cpumap using find_bit stuff (Arnaldo Carvalho de Melo)

- tools/build improvemnts (Jiri Olsa)

- Add more files to cscope/ctags databases (Jiri Olsa)

- Do not show 'trace' in 'perf help' if it is not compiled in (Jiri Olsa)

- Make perf_evlist__open() open evsels with their cpus and threads,
  like perf record does, making them consistent (Adrian Hunter)

- Fix pmu snapshot initialization bug (Stephane Eranian)

- Add missing headers in perf's MANIFEST (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

kernel test robot has reported the following crash:

  BUG: unable to handle kernel NULL pointer dereference at 00000100
  IP: [<c1074df6>] __queue_work+0x26/0x390
  *pdpt = 0000000000000000 *pde = f000ff53f000ff53 *pde = f000ff53f000ff53
  Oops: 0000 [#1] PREEMPT PREEMPT SMP SMP
  CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted 4.4.0-rc4-00139-g373ccbe5 #1
  Workqueue: events vmstat_shepherd
  task: cb684600 ti: cb7ba000 task.ti: cb7ba000
  EIP: 0060:[<c1074df6>] EFLAGS: 00010046 CPU: 0
  EIP is at __queue_work+0x26/0x390
  EAX: 00000046 EBX: cbb37800 ECX: cbb37800 EDX: 00000000
  ESI: 00000000 EDI: 00000000 EBP: cb7bbe68 ESP: cb7bbe38
   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  CR0: 8005003b CR2: 00000100 CR3: 01fd5000 CR4: 000006b0
  Stack:
  Call Trace:
    __queue_delayed_work+0xa1/0x160
    queue_delayed_work_on+0x36/0x60
    vmstat_shepherd+0xad/0xf0
    process_one_work+0x1aa/0x4c0
    worker_thread+0x41/0x440
    kthread+0xb0/0xd0
    ret_from_kernel_thread+0x21/0x40

The reason is that start_shepherd_timer schedules the shepherd work item
which uses vmstat_wq (vmstat_shepherd) before setup_vmstat allocates
that workqueue so if the further initialization takes more than HZ we
might end up scheduling on a NULL vmstat_wq.  This is really unlikely
but not impossible.

Fixes: 373ccbe5 ("mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress")
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This replaces all code in fs/compat_ioctl.c that translated
ioctl arguments into a in-kernel structure, then performed
do_ioctl under set_fs(KERNEL_DS), with code that allocates
data on the user stack and can call the VFS ioctl handler
under USER_DS.

This is done as a hardening measure because the caller
does not know what kind of ioctl handler will be invoked,
only that no corresponding compat_ioctl handler exists and
what the ioctl command number is. The accidental
invocation of an unlocked_ioctl handler that unexpectedly
calls copy_to_user could be a severe security issue.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

In code in fs/compat_ioctl.c that translates ioctl arguments
into a in-kernel structure, then performs sys_ioctl, possibly
under set_fs(KERNEL_DS), this commit changes the sys_ioctl
calls to do_ioctl calls. do_ioctl is a new function that does
the same thing as sys_ioctl, but doesn't look up the fd again.

This change is made to avoid (potential) security issues
because of ioctl handlers that accept one of the ioctl
commands I2C_FUNCS, VIDEO_GET_EVENT, MTIOCPOS, MTIOCGET,
TIOCGSERIAL, TIOCSSERIAL, RTC_IRQP_READ, RTC_EPOCH_READ.
This can happen for multiple reasons:

 - The ioctl command number could be reused.
 - The ioctl handler might not check the full ioctl
   command. This is e.g. true for drm_ioctl.
 - The ioctl handler is very special, e.g. cuse_file_ioctl

The real issue is that set_fs(KERNEL_DS) is used here,
but that's fixed in a separate commit
"compat_ioctl: don't call do_ioctl under set_fs(KERNEL_DS)".

This change mitigates potential security issues by
preventing a race that permits invocation of
unlocked_ioctl handlers under KERNEL_DS through compat
code even if a corresponding compat_ioctl handler exists.

So far, no way has been identified to use this to damage
kernel memory without having CAP_SYS_ADMIN in the init ns
(with the capability, doing reads/writes at arbitrary
kernel addresses should be easy through CUSE's ioctl
handler with FUSE_IOCTL_UNRESTRICTED set).

[AV: two missed sys_ioctl() taken care of]
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull ARM SoC fixes from Arnd Bergmann:
 "This is the final small set of ARM SoC bug fixes for linux-4.4, almost
  all regressions:

  OMAP:
   - data corruption on the Nokia N900 flash

  Allwinner:
   - Two defconfig change to get USB working again

  ARM Versatile:
   - Interrupt numbers gone bad after an older bug fix

  Nomadik:
   - Crashes from incorrect L2 cache settings

  VIA vt8500:
   - SD/MMC support on WM8650 never worked"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  dts: vt8500: Add SDHC node to DTS file for WM8650
  ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices
  ARM: versatile: fix MMC/SD interrupt assignment
  ARM: nomadik: set latencies to 8 cycles
  ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption
  ARM: Fix broken USB support in sunxi_defconfig

Pull KVM fix from Paolo Bonzini:
 "A simple fix.  I'm sending it before the merge window, because it
  refines a patch found in your master branch but not yet in the
  kvm/next branch that is destined for 4.5"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: only channel 0 of the i8254 is linked to the HPET

Pull ACPI fix from Rafael Wysocki:
 "Just one obvious fix that adds a missing function argument in ACPI
  code introduced recently (Kees Cook)"

* tag 'pm+acpi-4.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / property: avoid leaking format string into kobject name

Pull x86 fixes from Ingo Molnar:
 "A handful of x86 fixes:

   - a syscall ABI fix, fixing an Android breakage
   - a Xen PV guest fix relating to the RTC device, causing a
     non-working console
   - a Xen guest syscall stack frame fix
   - an MCE hotplug CPU crash fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/numachip: Fix NumaConnect2 MMCFG PCI access
  x86/entry: Restore traditional SYSENTER calling convention
  x86/entry: Fix some comments
  x86/paravirt: Prevent rtc_cmos platform device init on PV guests
  x86/xen: Avoid fast syscall path for Xen PV guests
  x86/mce: Ensure offline CPUs don't participate in rendezvous process

Pull scheduler fixes from Ingo Molnar:
 "Misc scheduler fixes"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Reset task's lockless wake-queues on fork()
  sched/core: Fix unserialized r-m-w scribbling stuff
  sched/core: Check tgid in is_global_init()
  sched/fair: Fix multiplication overflow on 32-bit systems

Pull perf fixes from Ingo Molnar:
 "Two core subsystem fixes, plus a handful of tooling fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix race in swevent hash
  perf: Fix race in perf_event_exec()
  perf list: Robustify event printing routine
  perf list: Add support for PERF_COUNT_SW_BPF_OUT
  perf hists browser: Fix segfault if use symbol filter in cmdline
  perf hists browser: Reset selection when refresh
  perf hists browser: Add NULL pointer check to prevent crash
  perf buildid-list: Fix return value of perf buildid-list -k
  perf buildid-list: Show running kernel build id fix

Pull irq fix from Ingo Molnar:
 "Fixes a core IRQ subsystem deadlock"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Prevent chip buslock deadlock

Pull block revert from Jens Axboe:
 "The previous pull request had a split fix for NVMe, however there are
  corner cases where that ends up blowing up.

  So let's revert it for 4.4.  The regression isn't introduced in this
  cycle, and it's "just" a performance regression, not a
  stability/integrity issue"

* 'for-linus' of git://git.kernel.dk/linux-block:
  Revert "block: Split bios on chunk boundaries"

Pull dmaengine fixes from Vinod Koul:
 "Late fixes for 4.4 are three fixes for drivers which include a revert
  of mic-x100 fix which is causing regression, xgene fix for double IRQ
  and async_tx fix to use GFP_NOWAIT"

* tag 'dmaengine-fix-4.4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: xgene-dma: Fix double IRQ issue by setting IRQ_DISABLE_UNLAZY flag
  async_tx: use GFP_NOWAIT rather than GFP_IO
  dmaengine: Revert "dmaengine: mic_x100: add missing spin_unlock"