- 27 Dec, 2012 35 commits
-
-
Ezequiel Garcia authored
This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Found by coccinelle. Hand patched and reviewed. Tested by compilation only. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier struct_name; struct struct_name to; struct struct_name from; expression E; @@ -memcpy(&(to), &(from), E); +to = from; // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ezequiel Garcia authored
This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Found by coccinelle. Hand patched and reviewed. Tested by compilation only. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier struct_name; struct struct_name to; struct struct_name from; expression E; @@ -memcpy(&(to), &(from), E); +to = from; // </smpl> Signed-off-by:
-
Ezequiel Garcia authored
This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Found by coccinelle. Hand patched and reviewed. Tested by compilation only. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier struct_name; struct struct_name to; struct struct_name from; expression E; @@ -memcpy(&(to), &(from), E); +to = from; // </smpl> Signed-off-by:
-
Hans Verkuil authored
I've always found it very confusing that the "Media ancillary drivers (tuners, sensors, i2c, frontends)" comment came after the "Autoselect" option. This patch moves it up and changes the "Autoselect" text to correspond more closely to the "Media ancillary drivers" comment. It also fixes two typos. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
John Törnblom authored
When the bttv driver is running without i2c_debug being set, the kernel log is being flooded with the string ">". This string is really a part of a debug message that is logged using several substrings protected by a conditional check. This patch adds the same conditional check to the leaked substring. Signed-off-by:
John Törnblom <john.tornblom@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
drivers/media/platform/omap3isp/ispqueue.c:399:18: warning: 'pa' may be used uninitialized in this function [-Wuninitialized] This is a false positive but the compiler has no way to know about it, so initialize the variable to 0. drivers/media/platform/omap3isp/ispqueue.c:445:6: warning: 'vm_page_prot' may be used uninitialized in this function [-Wuninitialized] This is a false positive and the compiler should know better. Use uninitialized_var(). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Patrice Chotard authored
Previously, demodulator and tuner attach was done in the demod_attach callback. Migrate the tuner part in the tuner_attach callback in ngene_info to do thing in right place. Signed-off-by:
Patrice Chotard <patricechotard@free.fr> Reviewed-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Patrice Chotard authored
Previously, gate control didn't work until drxd_init() execution. Migrate necessary set of commands in drxd_attach to allow gate control to be used by tuner which are accessible through i2c gate. Reported-by: frederic.mantegazza@gbiloba.org Signed-off-by:
-
Libin Yang authored
This patch replaces the global frame stats variables by using internal variables in mcam_camera structure. Signed-off-by:
Albert Wang <twang13@marvell.com> Signed-off-by:
Libin Yang <lbyang@marvell.com> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Konstantin Khlebnikov authored
During modiles initialization rc-core schedules work which calls request_module() several times to load ir-*-decoder modules, but it does not wait or cancel this work on module unloading. rc-core should use request_module_nowait() instead, because it anyway cannot load modules synchronously or cancel/wait pending work on unloading, because this leads to deadlock on modules_mutex between several "modprobe" processes. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by:
-
Laurent Pinchart authored
drivers/media/platform/omap3isp/ispcsiphy.c: In function ‘csiphy_routing_cfg’: drivers/media/platform/omap3isp/ispcsiphy.c:71:57: warning: ‘shift’ may be used uninitialized in this function [-Wuninitialized] drivers/media/platform/omap3isp/ispcsiphy.c:40:6: note: ‘shift’ was declared here The warning is a false positive but the compiler is right in complaining. Fix it by using the correct enum data type for the iface argument and adding a default case in the switch statement. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Cyril Roelandt authored
Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. This was found using the following semantic patch (http://coccinelle.lip6.fr/): <spml> @r@ identifier fops; identifier release_func; @@ static const struct v4l2_file_operations fops = { .release = release_func }; @depends on r@ identifier r.release_func; expression E; @@ static int release_func(...) { ... - if (mutex_lock_interruptible(E)) return -ERESTARTSYS; + mutex_lock(E); ... } </spml> Signed-off-by:
Cyril Roelandt <tipecaml@gmail.com> Acked-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Add an entry for the mt9m032, mt9p031, mt9t001 and mt9v032 Aptina sensor drivers. Signed-off-by:
-
Antonio Ospite authored
This device was originally made by Twinhan/Azurewave[1] and sometimes named DTV-DVB UDTT7049, it could be also found in Italy under the name of Digicom Digitune-S[2], or Think Xtra Hollywood DVB-T USB2.0[3]. Components: Usb bridge: ULi M9206 Frontend: MT352CG Tuner: MT2060F The firmware can be downloaded with: $ ./Documentation/dvb/get_dvb_firmware vp7049 [1] http://www.azurewave.com/Support_Utility_Driver.asp [2] http://www.digicom.it/digisit/driver_link.nsf/driverprodotto?openform&prodotto=DigiTuneS [3] http://www.txitalia.it/prodotto.asp?prodotto=txhollywooddvttvSigned-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
-
Antonio Ospite authored
Add an entry to download the dvb-usb-vp7049-0.95.fw firmware for the Twinhan vp7049 and similar devices. Known devices of this kind are: Twinhan/Azurewave DTV-DVB UDTT7049 Digicom Digitune-S Think Xtra Hollywood DVB-T USB2.0 Signed-off-by:
-
Antonio Ospite authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Fix CodingStyle issues introduced by the last patch Signed-off-by: -
Antonio Ospite authored
Add an m920x_rc_core_query() function for drivers which want to use the linux RC core infrastructure. Signed-off-by:
-
Antonio Ospite authored
Parsing the RC press state is invariant wrt. the keycode, take it out of the keycode scanning loop. Signed-off-by:
-
Antonio Ospite authored
This is in preparation to using RC core infrastructure for some devices, the RC button state parsing logic can be shared berween rc.legacy and rc.core callbacks as it is independent from the mechanism used for RC handling. Signed-off-by:
-
Antonio Ospite authored
This is in preparation for the vp7049 frontend attach function which is going to set a sequence of registers as well. Signed-off-by:
-
Antonio Ospite authored
Signed-off-by:
-
Antonio Ospite authored
Signed-off-by:
-
Simon Farnsworth authored
The SAA7134 appears to have trouble buffering more than one line of video when doing DMA. Rather than try to fix the driver to cope (as has been done by Andy Walls for the cx18 driver), put in a pm_qos_request to limit deep sleep exit latencies. The visible effect of not having this is that seemingly random lines are only partly transferred - if you feed in a static image, you see a portion of the image "flicker" into place. [mchehab@redhat.com: Fix ABI breakage due to some renames at pm_qos] Signed-off-by:
Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by:
-
Oleh Kravchenko authored
This patch provide only analog support. The device is based on AF9013 demodulator, XC3028 tuner and CX23885 chipset; subsystem id: 1461:d939 Signed-off-by:
Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by:
-
Nikolaus Schulz authored
Since most dvb ioctls wrap their real work with dvb_usercopy, the static mutex used in dvb_usercopy effectively is a global lock for dvb ioctls. Unfortunately, frontend ioctls can be blocked by the frontend thread for several seconds; this leads to unacceptable lock contention. Mitigate that by pushing the mutex from dvb_usercopy down to the individual, device specific ioctls. There are 10 such ioctl functions using dvb_usercopy, either calling it directly, or via the trivial wrapper dvb_generic_ioctl. The following already employ their own locking and look safe: • dvb_demux_ioctl (as per dvb_demux_do_ioctl) • dvb_dvr_ioctl (as per dvb_dvr_do_ioctl) • dvb_osd_ioctl (as per single non-trivial callee) • fdtv_ca_ioctl (as per callees) • dvb_frontend_ioctl The following functions do not, and are thus changed to use a device specific mutex: • dvb_net_ioctl (as per dvb_net_do_ioctl) • dvb_ca_en50221_io_ioctl (as per dvb_ca_en50221_io_do_ioctl) • dvb_video_ioctl • dvb_audio_ioctl • dvb_ca_ioctl Signed-off-by:Nikolaus Schulz <schulz@macnetix.de> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Juergen Lock authored
That likely fixes this MythTV ticket: http://code.mythtv.org/trac/ticket/10830 (which btw affects all usb tuners I tested as well, pctv452e, dib0700, af9015) pctv452e is still possibly broken with MythTV even after this fix; it does work with VDR here tho despite I2C errors. Reduced testcase: http://people.freebsd.org/~nox/tmp/ioctltst.c Thanx to devinheitmueller and crope from #linuxtv for helping with this fix! :) Signed-off-by:
Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by:
-
Luis R. Rodriguez authored
spinlock_t should always be used. Could not get this to build with allmodconfig: mcgrof@frijol ~/linux-next (git::(no branch))$ make C=1 M=drivers/media/platform/s5p-jpeg WARNING: Symbol version dump /home/mcgrof/linux-next/Module.symvers is missing; modules will have no dependencies and modversions. Building modules, stage 2. MODPOST 0 modules Reported-by:Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Luis R. Rodriguez authored
spinlock_t should always be used. Could not get this to build with allmodconfig: mcgrof@frijol ~/linux-next (git::(no branch))$ make C=1 M=drivers/media/platform/s5p-fimc/ WARNING: Symbol version dump /home/mcgrof/linux-next/Module.symvers is missing; modules will have no dependencies and modversions. LD drivers/media/platform/s5p-fimc/built-in.o Building modules, stage 2. MODPOST 0 modules Reported-by: -
Mauro Carvalho Chehab authored
Resolves the following warning that appears with allmodconfig on -arm: warning: (VIDEO_OMAP2_VOUT && DRM_OMAP) selects OMAP2_DSS which has unmet direct dependencies (HAS_IOMEM && ARCH_OMAP2PLUS) Signed-off-by: -
Mauro Carvalho Chehab authored
Fix a Kconfig warning that appears with allmodconfig on arm: warning: (DVB_USB_PCTV452E) selects TTPCI_EEPROM which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_PCI_SUPPORT && MEDIA_DIGITAL_TV_SUPPORT && I2C) Signed-off-by: -
Alf Høgemark authored
This patch adds support for the Elgato Video Capture, version 2, device. The device is added based on the code for CX231XX_BOARD_HAUPPAUGE_USBLIVE2, it is simply a copy of the code for that board, with the proper USB device info for the Elgato Video Capture V2 device. Signed-off-by:
Alf Høgemark <alf@i100.no> Signed-off-by:
-
Dan Carpenter authored
This error path is missing the unlock. [mchehab@redhat.com: Merged two equal patches into one] Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Acked-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Linux 3.8-rc1 * tag 'v3.8-rc1': (10696 commits) Linux 3.8-rc1 Revert "nfsd: warn on odd reply state in nfsd_vfs_read" ARM: dts: fix duplicated build target and alphabetical sort out for exynos dm stripe: add WRITE SAME support dm: remove map_info dm snapshot: do not use map_context dm thin: dont use map_context dm raid1: dont use map_context dm flakey: dont use map_context dm raid1: rename read_record to bio_record dm: move target request nr to dm_target_io dm snapshot: use per_bio_data dm verity: use per_bio_data dm raid1: use per_bio_data dm: introduce per_bio_data dm kcopyd: add WRITE SAME support to dm_kcopyd_zero dm linear: add WRITE SAME support dm: add WRITE SAME support dm: prepare to support WRITE SAME dm ioctl: use kmalloc if possible ... Conflicts: MAINTAINERS
-
- 26 Dec, 2012 5 commits
-
-
Dan Carpenter authored
We recently introduced a new return -ENODEV in this function but we need to unlock before returning. [mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch] Acked-by:
Herton R. Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
Douglas Bagnall <douglas@paradise.net.nz> Signed-off-by:
-
Scott Jiang authored
Bf60x soc has a new PPI called Enhanced PPI version 3. HD video is supported now. To achieve this, we redesign ppi params and add dv timings feature. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by:
-
Scott Jiang authored
Other drivers can make use of it. Signed-off-by:
-
Kirill Smelkov authored
I was testing my video-over-ethernet subsystem recently, and vivi seemed to be perfect video source for testing when one don't have lots of capture boards and cameras. Only its framerate was hardcoded to NTSC's 30fps, while in my country we usually use PAL (25 fps) and I needed that to precisely simulate bandwidth. That's why here is this patch with ->enum_frameintervals() and ->{g,s}_parm() implemented as suggested by Hans Verkuil which passes v4l2-compliance and manual testing through v4l2-ctl -P / -p <fps>. Regarding newly introduced __get_format(u32 pixelformat) I decided not to convert original get_format() to operate on fourcc codes, since >= 3 places in driver need to deal with v4l2_format and otherwise it won't be handy. [mchehab@redhat.com: Some CodingStyle fixes] Signed-off-by:Kirill Smelkov <kirr@mns.spb.ru> Acked-by:
-
Cyril Roelandt authored
The return values of copy_to_user() and copy_from_user() cannot be negative. Found using the following semantich patch: <spml> @exists@ identifier ret; statement S; expression E; @@ ( * ret = copy_to_user(...); | * ret = copy_from_user(...); ) ... when != ret = E when != if (ret) { <+... ret = E; ...+> } * if (ret < 0) S </spml> Signed-off-by:
-
