- 25 May, 2017 23 commits
-
-
Johan Hovold authored
commit eacb975b upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 2a9f8b5d ("V4L/DVB (5206): Usbvision: set alternate interface modification") Cc: Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 75cf0679 upstream. Add missing endianness conversion when using the USB device-descriptor bcdDevice field to construct a firmware file name. Fixes: 8ef80aef ("[IRDA]: irda-usb.c: STIR421x cleanups") Cc: Nick Fedchik <nfedchik@atlantic-link.com.ua> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Peter Chen authored
commit 7480d912 upstream. According to xHCI ch4.20 Scratchpad Buffers, the Scratchpad Buffer needs to be zeroed. ... The following operations take place to allocate Scratchpad Buffers to the xHC: ... b. Software clears the Scratchpad Buffer to '0' Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 4b148d51 upstream. platform_get_irq() returns an error code, but the xhci-plat driver ignores it and always returns -ENODEV. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Andrey Korolyov authored
commit 5f63424a upstream. This patch adds support for recognition of ARM-USB-TINY(H) devices which are almost identical to ARM-USB-OCD(H) but lacking separate barrel jack and serial console. By suggestion from Johan Hovold it is possible to replace ftdi_jtag_quirk with a bit more generic construction. Since all Olimex-ARM debuggers has exactly two ports, we could safely always use only second port within the debugger family. Signed-off-by:
Andrey Korolyov <andrey@xdel.ru> Signed-off-by:
-
Anthony Mallet authored
commit bb246681 upstream. Commit 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") enables unprivileged users to set the FTDI latency timer, but there was a logic flaw that skipped sending the corresponding USB control message to the device. Specifically, the device latency timer would not be updated until next open, something which was later also inadvertently broken by commit c19db4c9 ("USB: ftdi_sio: set device latency timeout at port probe"). A recent commit c6dce262 ("USB: serial: ftdi_sio: fix extreme low-latency setting") disabled the low-latency mode by default so we now need this fix to allow unprivileged users to again enable it. Signed-off-by:
Anthony Mallet <anthony.mallet@laas.fr> [johan: amend commit message] Fixes: 557aaa7f ("ft232: support the ASYNC_LOW_LATENCY flag") Fixes: c19db4c9 ("USB: ftdi_sio: set device latency timeout at port probe"). Signed-off-by:
-
Eric W. Biederman authored
commit b9a985db upstream. The code can potentially sleep for an indefinite amount of time in zap_pid_ns_processes triggering the hung task timeout, and increasing the system average. This is undesirable. Sleep with a task state of TASK_INTERRUPTIBLE instead of TASK_UNINTERRUPTIBLE to remove these undesirable side effects. Apparently under heavy load this has been allowing Chrome to trigger the hung time task timeout error and cause ChromeOS to reboot. Reported-by:
Vovo Yang <vovoy@google.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Pavel Roskin authored
commit ce420fd4 upstream. realbits, storagebits and shift should be numbers, not ASCII characters. Signed-off-by:
Pavel Roskin <plroskin@gmail.com> Reviewed-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 49e67dd1 upstream. The memory allocator passed to __unflatten_device_tree() (e.g. a wrapped kzalloc) can fail so add the missing sanity check to avoid dereferencing a NULL pointer. Fixes: fe140423 ("of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree") Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Rob Herring authored
commit eb310036 upstream. sparse gives the following warning for 'pci_space': ../drivers/of/address.c:266:26: warning: incorrect type in assignment (different base types) ../drivers/of/address.c:266:26: expected unsigned int [unsigned] [usertype] pci_space ../drivers/of/address.c:266:26: got restricted __be32 const [usertype] <noident> It appears that pci_space is only ever accessed on powerpc, so the endian swap is often not needed. Signed-off-by:
-
Tobias Herzog authored
commit 1bb9914e upstream. Notifications may only be 8 bytes long. Accessing the 9th and 10th byte of unimplemented/unknown notifications may be insecure. Also check the length of known notifications before accessing anything behind the 8th byte. Signed-off-by:
Tobias Herzog <t-herzog@gmx.de> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Johan Hovold authored
commit ebeb3667 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 36bcce43 ("ath9k_htc: Handle storage devices") Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Richard Cochran authored
commit c90722b5 upstream. Commit 43530b69 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly") intended to replace working inline helper functions with standard regmap calls. However, it also inverted the set/clear logic of the "CORE ADJ Allowed" bit. That patch was clearly never tested, since without that bit cleared, the core VDCDC1 voltage output does not react to I2C configuration changes. This patch fixes the issue by clearing the bit as in the original, correct implementation. Note for stable back porting that, due to subsequent driver churn, this patch will not apply on every kernel version. Fixes: 43530b69 ("regulator: Use regmap_read/write(), regmap_update_bits functions directly") Signed-off-by:
Richard Cochran <rcochran@linutronix.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Daniel Glöckner authored
commit 1ac202e9 upstream. Modifying the attributes of a file makes ima_inode_post_setattr reset the IMA cache flags. So if the file, which has just been created, is opened a second time before the first file descriptor is closed, verification fails since the security.ima xattr has not been written yet. We therefore have to look at the IMA_NEW_FILE even if the file already existed. With this patch there should no longer be an error when cat tries to open testfile: $ rm -f testfile $ ( echo test >&3 ; touch testfile ; cat testfile ) 3>testfile A file being new is no reason to accept that it is missing a digital signature demanded by the policy. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Brian Norris authored
commit 3c8cb9ad upstream. Command buffers (skb's) are allocated by the main driver, and freed upon the last use. That last use is often in mwifiex_free_cmd_buffer(). In the meantime, if the command buffer gets used by the PCI driver, we map it as DMA-able, and store the mapping information in the 'cb' memory. However, if a command was in-flight when resetting the device (and therefore was still mapped), we don't get a chance to unmap this memory until after the core has cleaned up its command handling. Let's keep a refcount within the PCI driver, so we ensure the memory only gets freed after we've finished unmapping it. Noticed by KASAN when forcing a reset via: echo 1 > /sys/bus/pci/.../reset The same code path can presumably be exercised in remove() and shutdown(). [ 205.390377] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex... [ 205.400393] ================================================================== [ 205.407719] BUG: KASAN: use-after-free in mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] at addr ffffffc0ad471b28 [ 205.419040] Read of size 16 by task bash/1913 [ 205.423421] ============================================================================= [ 205.431625] BUG skbuff_head_cache (Tainted: G B ): kasan: bad access detected [ 205.439815] ----------------------------------------------------------------------------- [ 205.439815] [ 205.449534] INFO: Allocated in __build_skb+0x48/0x114 age=1311 cpu=4 pid=1913 [ 205.456709] alloc_debug_processing+0x124/0x178 [ 205.461282] ___slab_alloc.constprop.58+0x528/0x608 [ 205.466196] __slab_alloc.isra.54.constprop.57+0x44/0x54 [ 205.471542] kmem_cache_alloc+0xcc/0x278 [ 205.475497] __build_skb+0x48/0x114 [ 205.479019] __netdev_alloc_skb+0xe0/0x170 [ 205.483244] mwifiex_alloc_cmd_buffer+0x68/0xdc [mwifiex] [ 205.488759] mwifiex_init_fw+0x40/0x6cc [mwifiex] [ 205.493584] _mwifiex_fw_dpc+0x158/0x520 [mwifiex] [ 205.498491] mwifiex_reinit_sw+0x2c4/0x398 [mwifiex] [ 205.503510] mwifiex_pcie_reset_notify+0x114/0x15c [mwifiex_pcie] [ 205.509643] pci_reset_notify+0x5c/0x6c [ 205.513519] pci_reset_function+0x6c/0x7c [ 205.517567] reset_store+0x68/0x98 [ 205.521003] dev_attr_store+0x54/0x60 [ 205.524705] sysfs_kf_write+0x9c/0xb0 [ 205.528413] INFO: Freed in __kfree_skb+0xb0/0xbc age=131 cpu=4 pid=1913 [ 205.535064] free_debug_processing+0x264/0x370 [ 205.539550] __slab_free+0x84/0x40c [ 205.543075] kmem_cache_free+0x1c8/0x2a0 [ 205.547030] __kfree_skb+0xb0/0xbc [ 205.550465] consume_skb+0x164/0x178 [ 205.554079] __dev_kfree_skb_any+0x58/0x64 [ 205.558304] mwifiex_free_cmd_buffer+0xa0/0x158 [mwifiex] [ 205.563817] mwifiex_shutdown_drv+0x578/0x5c4 [mwifiex] [ 205.569164] mwifiex_shutdown_sw+0x178/0x310 [mwifiex] [ 205.574353] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.580398] pci_reset_notify+0x5c/0x6c [ 205.584274] pci_dev_save_and_disable+0x24/0x6c [ 205.588837] pci_reset_function+0x30/0x7c [ 205.592885] reset_store+0x68/0x98 [ 205.596324] dev_attr_store+0x54/0x60 [ 205.600017] sysfs_kf_write+0x9c/0xb0 ... [ 205.800488] Call trace: [ 205.802980] [<ffffffc00020a69c>] dump_backtrace+0x0/0x190 [ 205.808415] [<ffffffc00020a96c>] show_stack+0x20/0x28 [ 205.813506] [<ffffffc0005d020c>] dump_stack+0xa4/0xcc [ 205.818598] [<ffffffc0003be44c>] print_trailer+0x158/0x168 [ 205.824120] [<ffffffc0003be5f0>] object_err+0x4c/0x5c [ 205.829210] [<ffffffc0003c45bc>] kasan_report+0x334/0x500 [ 205.834641] [<ffffffc0003c3994>] check_memory_region+0x20/0x14c [ 205.840593] [<ffffffc0003c3b14>] __asan_loadN+0x14/0x1c [ 205.845879] [<ffffffbffc46171c>] mwifiex_unmap_pci_memory.isra.14+0x4c/0x100 [mwifiex_pcie] [ 205.854282] [<ffffffbffc461864>] mwifiex_pcie_delete_cmdrsp_buf+0x94/0xa8 [mwifiex_pcie] [ 205.862421] [<ffffffbffc462028>] mwifiex_pcie_free_buffers+0x11c/0x158 [mwifiex_pcie] [ 205.870302] [<ffffffbffc4620d4>] mwifiex_pcie_down_dev+0x70/0x80 [mwifiex_pcie] [ 205.877736] [<ffffffbffc1397a8>] mwifiex_shutdown_sw+0x190/0x310 [mwifiex] [ 205.884658] [<ffffffbffc4606b4>] mwifiex_pcie_reset_notify+0xd4/0x15c [mwifiex_pcie] [ 205.892446] [<ffffffc000635f54>] pci_reset_notify+0x5c/0x6c [ 205.898048] [<ffffffc00063a044>] pci_dev_save_and_disable+0x24/0x6c [ 205.904350] [<ffffffc00063cf0c>] pci_reset_function+0x30/0x7c [ 205.910134] [<ffffffc000641118>] reset_store+0x68/0x98 [ 205.915312] [<ffffffc000771588>] dev_attr_store+0x54/0x60 [ 205.920750] [<ffffffc00046f53c>] sysfs_kf_write+0x9c/0xb0 [ 205.926182] [<ffffffc00046dfb0>] kernfs_fop_write+0x184/0x1f8 [ 205.931963] [<ffffffc0003d64f4>] __vfs_write+0x6c/0x17c [ 205.937221] [<ffffffc0003d7164>] vfs_write+0xf0/0x1c4 [ 205.942310] [<ffffffc0003d7da0>] SyS_write+0x78/0xd8 [ 205.947312] [<ffffffc000204634>] el0_svc_naked+0x24/0x28 ... [ 205.998268] ================================================================== This bug has been around in different forms for a while. It was sort of noticed in commit 955ab095 ("mwifiex: Do not kfree cmd buf while unregistering PCIe"), but it just fixed the double-free, without acknowledging the potential for use-after-free. Fixes: fc331460 ("mwifiex: use pci_alloc/free_consistent APIs for PCIe") Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Joe Thornber authored
commit 0377a07c upstream. When decrementing the reference count for a block, the free count wasn't being updated if the reference count went to zero. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit 91bcdb92 upstream. These calls were the wrong way round in __write_initial_superblock. Signed-off-by:
-
Mikulas Patocka authored
commit 1b0fb5a5 upstream. __get_memory_limit() tests if dm_bufio_cache_size changed and calls __cache_size_refresh() if it did. It takes dm_bufio_clients_lock while it already holds the client lock. However, lock ordering is violated because in cleanup_old_buffers() dm_bufio_clients_lock is taken before the client lock. This results in a possible deadlock and lockdep engine warning. Fix this deadlock by changing mutex_lock() to mutex_trylock(). If the lock can't be taken, it will be re-checked next time when a new buffer is allocated. Also add "unlikely" to the if condition, so that the optimizer assumes that the condition is false. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Vinothkumar Raja authored
commit 7d1fedb6 upstream. dm_btree_find_lowest_key() is giving incorrect results. find_key() traverses the btree correctly for finding the highest key, but there is an error in the way it traverses the btree for retrieving the lowest key. dm_btree_find_lowest_key() fetches the first key of the rightmost block of the btree instead of fetching the first key from the leftmost block. Fix this by conditionally passing the correct parameter to value64() based on the @find_highest flag. Signed-off-by:
Erez Zadok <ezk@fsl.cs.sunysb.edu> Signed-off-by:
Vinothkumar Raja <vinraja@cs.stonybrook.edu> Signed-off-by:
Nidhi Panpalia <npanpalia@cs.stonybrook.edu> Signed-off-by:
-
Vamsi Krishna Samavedam authored
commit 2f964780 upstream. Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by:
Vamsi Krishna Samavedam <vskrishn@codeaurora.org> Signed-off-by:
-
Willy Tarreau authored
commit 3e21f4af upstream. The lp_setup() code doesn't apply any bounds checking when passing "lp=none", and only in this case, resulting in an overflow of the parport_nr[] array. All versions in Git history are affected. Reported-By:
Roee Hay <roee.hay@hcl.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Johan Hovold authored
commit 46c319b8 upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Alan Stern authored
commit 628c2893 upstream. The ene_usb6250 sub-driver in usb-storage does USB I/O to buffers on the stack, which doesn't work with vmapped stacks. This patch fixes the problem by allocating a separate 512-byte buffer at probe time and using it for all of the offending I/O operations. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Andreas Hartmann <andihartmann@01019freenet.de> Signed-off-by:
-
- 20 May, 2017 17 commits
-
-
Greg Kroah-Hartman authored
-
Kangjie Lu authored
commit e4ec8cc8 upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
Kangjie Lu <kjlu@gatech.edu> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Kangjie Lu authored
commit 9a47e9cf upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
-
Kangjie Lu authored
commit cec8f96e upstream. The stack object “tread” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by:
-
Takashi Iwai authored
commit af368027 upstream. ALSA timer ioctls have an open race and this may lead to a use-after-free of timer instance object. A simplistic fix is to make each ioctl exclusive. We have already tread_sem for controlling the tread, and extend this as a global mutex to be applied to each ioctl. The downside is, of course, the worse concurrency. But these ioctls aren't to be parallel accessible, in anyway, so it should be fine to serialize there. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
-
Takashi Iwai authored
commit 3567eb6a upstream. ALSA sequencer code has an open race between the timer setup ioctl and the close of the client. This was triggered by syzkaller fuzzer, and a use-after-free was caught there as a result. This patch papers over it by adding a proper queue->timer_mutex lock around the timer-related calls in the relevant code path. Reported-by:
-
Jann Horn authored
commit 29d64551 upstream. Until now, hitting this BUG_ON caused a recursive oops (because oops handling involves do_exit(), which calls into the scheduler, which in turn raises an oops), which caused stuff below the stack to be overwritten until a panic happened (e.g. via an oops in interrupt context, caused by the overwritten CPU index in the thread_info). Just panic directly. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [AmitP: Minor refactoring of upstream changes for linux-3.18.y] Signed-off-by:
-
Bjørn Mork authored
commit 4d06dd53 upstream. usbnet_link_change will call schedule_work and should be avoided if bind is failing. Otherwise we will end up with scheduled work referring to a netdev which has gone away. Instead of making the call conditional, we can just defer it to usbnet_probe, using the driver_info flag made for this purpose. Fixes: 8a34b0ae ("usbnet: cdc_ncm: apply usbnet_link_change") Reported-by:
Andrey Konovalov <andreyknvl@gmail.com> Suggested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Benjamin Tissoires authored
commit 50220dea upstream. Plugging a Logitech DJ receiver with KASAN activated raises a bunch of out-of-bound readings. The fields are allocated up to MAX_USAGE, meaning that potentially, we do not have enough fields to fit the incoming values. Add checks and silence KASAN. Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
WANG Cong authored
commit 205e1e25 upstream. Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Rainer Weikusat authored
commit a5527dda upstream. The unix_dgram_sendmsg routine use the following test if (unlikely(unix_peer(other) != sk && unix_recvq_full(other))) { to determine if sk and other are in an n:1 association (either established via connect or by using sendto to send messages to an unrelated socket identified by address). This isn't correct as the specified address could have been bound to the sending socket itself or because this socket could have been connected to itself by the time of the unix_peer_get but disconnected before the unix_state_lock(other). In both cases, the if-block would be entered despite other == sk which might either block the sender unintentionally or lead to trying to unlock the same spin lock twice for a non-blocking send. Add a other != sk check to guard against this. Fixes: 7d267278 ("unix: avoid use-after-free in ep_remove_wait_queue") Reported-By:
Philipp Hahn <pmhahn@pmhahn.de> Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Tested-by:
-
Eric Dumazet authored
commit 69ce6487 upstream. While cooking the sctp np->opt rcu fixes, I forgot to move one rcu_read_unlock() after the added rcu_dereference() in sctp_v6_get_dst() This gave lockdep warnings reported by Dave Jones. Fixes: c836a8ba ("ipv6: sctp: add rcu protection around np->opt") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
commit c836a8ba upstream. This patch completes the work I did in commit 45f6fad8 ("ipv6: add complete rcu protection around np->opt"), as I missed sctp part. This simply makes sure np->opt is used with proper RCU locking and accessors. Signed-off-by:
-
Calvin Owens authored
commit f3951a37 upstream. In sg_common_write(), we free the block request and return -ENODEV if the device is detached in the middle of the SG_IO ioctl(). Unfortunately, sg_finish_rem_req() also tries to free srp->rq, so we end up freeing rq->cmd in the already free rq object, and then free the object itself out from under the current user. This ends up corrupting random memory via the list_head on the rq object. The most common crash trace I saw is this: ------------[ cut here ]------------ kernel BUG at block/blk-core.c:1420! Call Trace: [<ffffffff81281eab>] blk_put_request+0x5b/0x80 [<ffffffffa0069e5b>] sg_finish_rem_req+0x6b/0x120 [sg] [<ffffffffa006bcb9>] sg_common_write.isra.14+0x459/0x5a0 [sg] [<ffffffff8125b328>] ? selinux_file_alloc_security+0x48/0x70 [<ffffffffa006bf95>] sg_new_write.isra.17+0x195/0x2d0 [sg] [<ffffffffa006cef4>] sg_ioctl+0x644/0xdb0 [sg] [<ffffffff81170f80>] do_vfs_ioctl+0x90/0x520 [<ffffffff81258967>] ? file_has_perm+0x97/0xb0 [<ffffffff811714a1>] SyS_ioctl+0x91/0xb0 [<ffffffff81602afb>] tracesys+0xdd/0xe2 RIP [<ffffffff81281e04>] __blk_put_request+0x154/0x1a0 The solution is straightforward: just set srp->rq to NULL in the failure branch so that sg_finish_rem_req() doesn't attempt to re-free it. Additionally, since sg_rq_end_io() will never be called on the object when this happens, we need to free memory backing ->cmd if it isn't embedded in the object itself. KASAN was extremely helpful in finding the root cause of this bug. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Lukas Czerner authored
commit 6934da92 upstream. There is a use-after-free possibility in __ext4_journal_stop() in the case that we free the handle in the first jbd2_journal_stop() because we're referencing handle->h_err afterwards. This was introduced in 9705acd6 and it is wrong. Fix it by storing the handle->h_err value beforehand and avoid referencing potentially freed handle. Fixes: 9705acd6Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
David Howells authored
commit 23c8a812 upstream. This fixes CVE-2016-0758. In the ASN.1 decoder, when the length field of an ASN.1 value is extracted, it isn't validated against the remaining amount of data before being added to the cursor. With a sufficiently large size indicated, the check: datalen - dp < 2 may then fail due to integer overflow. Fix this by checking the length indicated against the amount of remaining data in both places a definite length is determined. Whilst we're at it, make the following changes: (1) Check the maximum size of extended length does not exceed the capacity of the variable it's being stored in (len) rather than the type that variable is assumed to be (size_t). (2) Compare the EOC tag to the symbolic constant ASN1_EOC rather than the integer 0. (3) To reduce confusion, move the initialisation of len outside of: for (len = 0; n > 0; n--) { since it doesn't have anything to do with the loop counter n. Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
David Woodhouse <David.Woodhouse@intel.com> Acked-by:
Peter Jones <pjones@redhat.com> Signed-off-by:
-
David Howells authored
commit 0d62e9dd upstream. If the ASN.1 decoder is asked to parse a sequence of objects, non-optional matches get skipped if there's no more data to be had rather than a data-overrun error being reported. This is due to the code segment that decides whether to skip optional matches (ie. matches that could get ignored because an element is marked OPTIONAL in the grammar) due to a lack of data also skips non-optional elements if the data pointer has reached the end of the buffer. This can be tested with the data decoder for the new RSA akcipher algorithm that takes three non-optional integers. Currently, it skips the last integer if there is insufficient data. Without the fix, #defining DEBUG in asn1_decoder.c will show something like: next_op: pc=0/13 dp=0/270 C=0 J=0 - match? 30 30 00 - TAG: 30 266 CONS next_op: pc=2/13 dp=4/270 C=1 J=0 - match? 02 02 00 - TAG: 02 257 - LEAF: 257 next_op: pc=5/13 dp=265/270 C=1 J=0 - match? 02 02 00 - TAG: 02 3 - LEAF: 3 next_op: pc=8/13 dp=270/270 C=1 J=0 next_op: pc=11/13 dp=270/270 C=1 J=0 - end cons t=4 dp=270 l=270/270 The next_op line for pc=8/13 should be followed by a match line. This is not exploitable for X.509 certificates by means of shortening the message and fixing up the ASN.1 CONS tags because: (1) The relevant records being built up are cleared before use. (2) If the message is shortened sufficiently to remove the public key, the ASN.1 parse of the RSA key will fail quickly due to a lack of data. (3) Extracted signature data is either turned into MPIs (which cope with a 0 length) or is simpler integers specifying algoritms and suchlike (which can validly be 0); and (4) The AKID and SKID extensions are optional and their removal is handled without risking passing a NULL to asymmetric_key_generate_id(). (5) If the certificate is truncated sufficiently to remove the subject, issuer or serialNumber then the ASN.1 decoder will fail with a 'Cons stack underflow' return. This is not exploitable for PKCS#7 messages by means of removal of elements from such a message from the tail end of a sequence: (1) Any shortened X.509 certs embedded in the PKCS#7 message are survivable as detailed above. (2) The message digest content isn't used if it shows a NULL pointer, similarly, the authattrs aren't used if that shows a NULL pointer. (3) A missing signature results in a NULL MPI - which the MPI routines deal with. (4) If data is NULL, it is expected that the message has detached content and that is handled appropriately. (5) If the serialNumber is excised, the unconditional action associated with it will pick up the containing SEQUENCE instead, so no NULL pointer will be seen here. If both the issuer and the serialNumber are excised, the ASN.1 decode will fail with an 'Unexpected tag' return. In either case, there's no way to get to asymmetric_key_generate_id() with a NULL pointer. (6) Other fields are decoded to simple integers. Shortening the message to omit an algorithm ID field will cause checks on this to fail early in the verification process. This can also be tested by snipping objects off of the end of the ASN.1 stream such that mandatory tags are removed - or even from the end of internal SEQUENCEs. If any mandatory tag is missing, the error EBADMSG *should* be produced. Without this patch ERANGE or ENOPKG might be produced or the parse may apparently succeed, perhaps with ENOKEY or EKEYREJECTED being produced later, depending on what gets snipped. Just snipping off the final BIT_STRING or OCTET_STRING from either sample should be a start since both are mandatory and neither will cause an EBADMSG without the patches Reported-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
