- 28 Oct, 2016 40 commits
-
-
Taesoo Kim authored
commit 559cce69 upstream. When 'jh->b_transaction == transaction' (asserted by below) J_ASSERT_JH(jh, (jh->b_transaction == transaction || ... 'journal->j_list_lock' will be incorrectly unlocked, since the the lock is aquired only at the end of if / else-if statements (missing the else case). Signed-off-by:
Taesoo Kim <tsgatesv@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Fixes: 6e4862a5Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit c4704a4f upstream. The sysfs file /sys/fs/ext4/features/encryption was present on kernels compiled with CONFIG_EXT4_FS_ENCRYPTION=n. This was misleading because such kernels do not actually support ext4 encryption. Therefore, only provide this file on kernels compiled with CONFIG_EXT4_FS_ENCRYPTION=y. Note: since the ext4 feature files are all hardcoded to have a contents of "supported", it really is the presence or absence of the file that is significant, not the contents (and this change reflects that). Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Eric Biggers authored
commit 8906a822 upstream. i_rwsem needs to be acquired while setting an encryption policy so that concurrent calls to FS_IOC_SET_ENCRYPTION_POLICY are correctly serialized (especially the ->get_context() + ->set_context() pair), and so that new files cannot be created in the directory during or after the ->empty_dir() check. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Eric Biggers authored
commit fb445437 upstream. The XTS tweak (or IV) was initialized differently on little endian and big endian systems. Because the ciphertext depends on the XTS tweak, it was not possible to use an encrypted filesystem created by a little endian system on a big endian system and vice versa, even if they shared the same PAGE_SIZE. Fix this by always using little endian. This will break hypothetical big endian users of ext4 or f2fs encryption. However, all users we are aware of are little endian, and it's believed that "real" big endian users are unlikely to exist yet. So this might as well be fixed now before it's too late. Signed-off-by:
-
Christian Borntraeger authored
commit a5efb6b6 upstream. Usually a validity intercept is a programming error of the host because of invalid entries in the state description. We can get a validity intercept if the mode of the runtime instrumentation control block is wrong. As the host does not know which modes are valid, this can be used by userspace to trigger a WARN. Instead of printing a WARN let's return an error to userspace as this can only happen if userspace provides a malformed initial value (e.g. on migration). The kernel should never warn on bogus input. Instead let's log it into the s390 debug feature. While at it, let's return -EINVAL for all validity intercepts as this will trigger an error in QEMU like error: kvm run failed Invalid argument PSW=mask 0404c00180000000 addr 000000000063c226 cc 00 R00=000000000000004f R01=0000000000000004 R02=0000000000760005 R03=000000007fe0a000 R04=000000000064ba2a R05=000000049db73dd0 R06=000000000082c4b0 R07=0000000000000041 R08=0000000000000002 R09=000003e0804042a8 R10=0000000496152c42 R11=000000007fe0afb0 [...] This will avoid an endless loop of validity intercepts. Fixes: c6e5f166 ("KVM: s390: implement the RI support of guest") Acked-by:
Fan Zhang <zhangfan@linux.vnet.ibm.com> Reviewed-by:
Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Ulf Hansson authored
commit 4f48aa7a upstream. Accesses of the rtsx sdmmc's parent device, which is the rtsx usb device, must be done when it's runtime resumed. Currently this isn't case when changing the led, so let's fix this by adding a pm_runtime_get_sync() and a pm_runtime_put() around those operations. Reported-by:
Ritesh Raj Sarraf <rrs@researchut.com> Tested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Ulf Hansson authored
commit 31cf742f upstream. The rtsx_usb_sdmmc driver may bail out in its ->set_ios() callback when no SD card is inserted. This is wrong, as it could cause the device to remain runtime resumed when it's unused. Fix this behaviour. Tested-by:
-
Shawn Lin authored
commit 1720d354 upstream. When introducing hs400es, I didn't notice that we haven't switched voltage to 1V2 or 1V8 for it. That happens to work as the first controller claiming to support hs400es, arasan(5.1), which is designed to only support 1V8. So the voltage is fixed to 1V8. But it actually is wrong, and will not fit for other host controllers. Let's fix it. Fixes: commit 81ac2af6 ("mmc: core: implement enhanced strobe support") Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Jiri Slaby authored
commit 3f2d2664 upstream. Commit f68381a7 (mmc: block: fix packed command header endianness) correctly fixed endianness handling of packed_cmd_hdr in mmc_blk_packed_hdr_wrq_prep. But now, sparse complains about incorrect types: drivers/mmc/card/block.c:1613:27: sparse: incorrect type in assignment (different base types) drivers/mmc/card/block.c:1613:27: expected unsigned int [unsigned] [usertype] <noident> drivers/mmc/card/block.c:1613:27: got restricted __le32 [usertype] <noident> ... So annotate cmd_hdr properly using __le32 to make everyone happy. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Fixes: f68381a7 (mmc: block: fix packed command header endianness) Signed-off-by:
-
Frederic Barrat authored
commit d2cf909c upstream. If a cxl adapter faults on an invalid address for a kernel context, we may enter copro_calculate_slb() with a NULL mm pointer (kernel context) and an effective address which looks like a user address. Which will cause a crash when dereferencing mm. It is clearly an AFU bug, but there's no reason to crash either. So return an error, so that cxl can ack the interrupt with an address error. Fixes: 73d16a6e ("powerpc/cell: Move data segment faulting code out of cell platform") Signed-off-by:
Frederic Barrat <fbarrat@linux.vnet.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nikolay Borisov authored
commit 0d7718f6 upstream. In case __ceph_do_getattr returns an error and the retry_op in ceph_read_iter is not READ_INLINE, then it's possible to invoke __free_page on a page which is NULL, this naturally leads to a crash. This can happen when, for example, a process waiting on a MDS reply receives sigterm. Fix this by explicitly checking whether the page is set or not. Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Reviewed-by:
Yan, Zheng <zyan@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Will Deacon authored
commit 60e21a0e upstream. The WnR bit in the HSR/ESR_EL2 indicates whether a data abort was generated by a read or a write instruction. For stage 2 data aborts generated by a stage 1 translation table walk (i.e. the actual page table access faults at EL2), the WnR bit therefore reports whether the instruction generating the walk was a load or a store, *not* whether the page table walker was reading or writing the entry. For page tables marked as read-only at stage 2 (e.g. due to KSM merging them with the tables from another guest), this could result in livelock, where a page table walk generated by a load instruction attempts to set the access flag in the stage 1 descriptor, but fails to trigger CoW in the host since only a read fault is reported. This patch modifies the arm64 kvm_vcpu_dabt_iswrite function to take into account stage 2 faults in stage 1 walks. Since DBM cannot be disabled at EL2 for CPUs that implement it, we assume that these faults are always causes by writes, avoiding the livelock situation at the expense of occasional, spurious CoWs. We could, in theory, do a bit better by checking the guest TCR configuration and inspecting the page table to see why the PTE faulted. However, I doubt this is measurable in practice, and the threat of livelock is real. Cc: Julien Grall <julien.grall@arm.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Andre Przywara authored
commit 87261d19 upstream. Commit 7dd01aef ("arm64: trap userspace "dc cvau" cache operation on errata-affected core") adds code to execute cache maintenance instructions in the kernel on behalf of userland on CPUs with certain ARM CPU errata. It turns out that the address hasn't been checked to be a valid user space address, allowing userland to clean cache lines in kernel space. Fix this by introducing an address check before executing the instructions on behalf of userland. Since the address doesn't come via a syscall parameter, we can't just reject tagged pointers and instead have to remove the tag when checking against the user address limit. Fixes: 7dd01aef ("arm64: trap userspace "dc cvau" cache operation on errata-affected core") Reported-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
Andre Przywara <andre.przywara@arm.com> [will: rework commit message + replace access_ok with max_user_addr()] Signed-off-by:
-
Marc Zyngier authored
commit 85054035 upstream. Commit f436b2ac ("arm64: kernel: fix architected PMU registers unconditional access") made sure we wouldn't access unimplemented PMU registers, but also left MDCR_EL2 uninitialized in that case, leading to trap bits being potentially left set. Make sure we always write something in that register. Fixes: f436b2ac ("arm64: kernel: fix architected PMU registers unconditional access") Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Will Deacon authored
commit 1e6e57d9 upstream. Writing the outer loop of an LL/SC sequence using do {...} while constructs potentially allows the compiler to hoist memory accesses between the STXR and the branch back to the LDXR. On CPUs that do not guarantee forward progress of LL/SC loops when faced with memory accesses to the same ERG (up to 2k) between the failed STXR and the branch back, we may end up livelocking. This patch avoids this issue in our percpu atomics by rewriting the outer loop as part of the LL/SC inline assembly block. Fixes: f97fc810 ("arm64: percpu: Implement this_cpu operations") Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
-
Ard Biesheuvel authored
commit 9c0e83c3 upstream. As it turns out, the KASLR code breaks CONFIG_MODVERSIONS, since the kcrctab has an absolute address field that is relocated at runtime when the kernel offset is randomized. This has been fixed already for PowerPC in the past, so simply wire up the existing code dealing with this issue. Fixes: f80fb3a3 ("arm64: add support for kernel ASLR") Tested-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Will Deacon authored
commit 1c5b51df upstream. If a CPU does not implement a global monitor for certain memory types, then userspace can attempt a kernel DoS by issuing SWP instructions targetting the problematic memory (for example, a framebuffer mapped with non-cacheable attributes). The SWP emulation code protects against these sorts of attacks by checking for pending signals and potentially rescheduling when the STXR instruction fails during the emulation. Whilst this is good for avoiding livelock, it harms emulation of legitimate SWP instructions on CPUs where forward progress is not guaranteed if there are memory accesses to the same reservation granule (up to 2k) between the failing STXR and the retry of the LDXR. This patch solves the problem by retrying the STXR a bounded number of times (4) before breaking out of the LL/SC loop and looking for something else to do. Fixes: bd35a4ad ("arm64: Port SWP/SWPB emulation support from arm") Reviewed-by:
-
Ulf Hansson authored
commit 9158cb29 upstream. Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. This is currently not the case and it could trigger various errors. Fix this by properly deal with runtime PM in this regards. This means making sure the device is runtime resumed, when serving requests via the ->request() callback or changing settings via the ->set_param() callbacks. Cc: Ritesh Raj Sarraf <rrs@researchut.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
commit 796aa46a upstream. Accesses to the rtsx usb device, which is the parent of the rtsx memstick device, must not be done unless it's runtime resumed. Therefore when the rtsx_usb_ms driver polls for inserted memstick cards, let's add pm_runtime_get|put*() to make sure accesses is done when the rtsx usb device is runtime resumed. Reported-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Jan Kara authored
commit a2ed0b39 upstream. When isofs_mount() is called to mount a device read-write, it returns EACCES even before it checks that the device actually contains an isofs filesystem. This may confuse mount(8) which then tries to mount all subsequent filesystem types in read-only mode. Fix the problem by returning EACCES only once we verify that the device indeed contains an iso9660 filesystem. Fixes: 17b7f7cfReported-by:
Kent Overstreet <kent.overstreet@gmail.com> Reported-by:
Karel Zak <kzak@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Vaibhav Jain authored
commit 70b565bb upstream. This patch prevents resetting the cxl adapter via sysfs in presence of one or more active cxl_context on it. This protects against an unrecoverable error caused by PSL owning a dirty cache line even after reset and host tries to touch the same cache line. In case a force reset of the card is required irrespective of any active contexts, the int value -1 can be stored in the 'reset' sysfs attribute of the card. The patch introduces a new atomic_t member named contexts_num inside struct cxl that holds the number of active context attached to the card , which is checked against '0' before proceeding with the reset. To prevent against a race condition where a context is activated just after reset check is performed, the contexts_num is atomically set to '-1' after reset-check to indicate that no more contexts can be activated on the card anymore. Before activating a context we atomically test if contexts_num is non-negative and if so, increment its value by one. In case the value of contexts_num is negative then it indicates that the card is about to be reset and context activation is error-ed out at that point. Fixes: 62fa19d4 ("cxl: Add ability to reset the card") Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by:
Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by:
-
Vladimir Murzin authored
commit 9224eb77 upstream. Entry Size in GITS_BASER<n> occupies 5 bits [52:48], but we mask out 8 bits. Fixes: cc2d3216 ("irqchip: GICv3: ITS command queue") Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Noam Camus authored
commit c0ca8df7 upstream. IPI_IRQ (also TIMER0_IRQ) should be acked before the action->handler is called in handle_percpu_devid_irq. The IPI irq is edge sensitive and we might miss an IPI interrupt if it is triggered again while the handler runs. Fixes: 44df427c ("irqchip: add nps Internal and external irqchips") Signed-off-by:
Noam Camus <noamca@mellanox.com> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1476364532-12634-1-git-send-email-noamca@mellanox.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Dan Carpenter authored
commit d102eb5c upstream. The timeout loop terminates when the loop count is zero, but the decrement of the count variable is post check. So count is -1 when we check for the timeout and therefor the error message is supressed. Change it to predecrement, so the error message is emitted. [ tglx: Massaged changelog ] Fixes: a2c22510 ("irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sudeep Holla <sudeep.holla@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/20161014072534.GA15168@mwandaSigned-off-by:
-
Peter Zijlstra authored
commit b60205c7 upstream. While going through enqueue/dequeue to review the movement of set_curr_task() I noticed that the (2nd) update_min_vruntime() call in dequeue_entity() is suspect. It turns out, its actually wrong because it will consider cfs_rq->curr, which could be the entry we just normalized. This mixes different vruntime forms and leads to fail. The purpose of the second update_min_vruntime() is to move min_vruntime forward if the entity we just removed is the one that was holding it back; _except_ for the DEQUEUE_SAVE case, because then we know its a temporary removal and it will come back. However, since we do put_prev_task() _after_ dequeue(), cfs_rq->curr will still be set (and per the above, can be tranformed into a different unit), so update_min_vruntime() should also consider curr->on_rq. This also fixes another corner case where the enqueue (which also does update_curr()->update_min_vruntime()) happens on the rq->lock break in schedule(), between dequeue and put_prev_task. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Fixes: 1e876231 ("sched: Fix ->min_vruntime calculation in dequeue_entity()") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Vincent Guittot authored
commit b5a9b340 upstream. A scheduler performance regression has been reported by Joseph Salisbury, which he bisected back to: 3d30544f ("sched/fair: Apply more PELT fixes) The regression triggers when several levels of task groups are involved (read: SystemD) and cpu_possible_mask != cpu_present_mask. The root cause is that group entity's load (tg_child->se[i]->avg.load_avg) is initialized to scale_load_down(se->load.weight). During the creation of a child task group, its group entities on possible CPUs are attached to parent's cfs_rq (tg_parent) and their loads are added to the parent's load (tg_parent->load_avg) with update_tg_load_avg(). But only the load on online CPUs will then be updated to reflect real load, whereas load on other CPUs will stay at the initial value. The result is a tg_parent->load_avg that is higher than the real load, the weight of group entities (tg_parent->se[i]->load.weight) on online CPUs is smaller than it should be, and the task group gets a less running time than what it could expect. ( This situation can be detected with /proc/sched_debug. The ".tg_load_avg" of the task group will be much higher than sum of ".tg_load_avg_contrib" of online cfs_rqs of the task group. ) The load of group entities don't have to be intialized to something else than 0 because their load will increase when an entity is attached. Reported-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Vincent Guittot <vincent.guittot@linaro.org> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: joonwoop@codeaurora.org Fixes: 3d30544f ("sched/fair: Apply more PELT fixes) Link: http://lkml.kernel.org/r/1476881123-10159-1-git-send-email-vincent.guittot@linaro.orgSigned-off-by:
-
Ville Syrjälä authored
commit a171bc51 upstream. Initialize the spinlock before using it. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.8.0-dwc-bisect #4 Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLAKFF81.X64.0088.R10.1403240443 FFD8_X64_R_2014_13_1_00 03/24/2014 0000000000000000 ffff8800788ff770 ffffffff8133d597 0000000000000000 0000000000000000 ffff8800788ff7e0 ffffffff810cfb9e 0000000000000002 ffff8800788ff7d0 ffffffff8205b600 0000000000000002 ffff8800788ff7f0 Call Trace: [<ffffffff8133d597>] dump_stack+0x67/0x90 [<ffffffff810cfb9e>] register_lock_class+0x52e/0x540 [<ffffffff810d2081>] __lock_acquire+0x81/0x16b0 [<ffffffff810cede1>] ? save_trace+0x41/0xd0 [<ffffffff810d33b2>] ? __lock_acquire+0x13b2/0x16b0 [<ffffffff810cf05a>] ? __lock_is_held+0x4a/0x70 [<ffffffff810d3b1a>] lock_acquire+0xba/0x220 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff81631567>] _raw_spin_lock_irqsave+0x47/0x60 [<ffffffff8136f1fe>] ? byt_gpio_get_direction+0x3e/0x80 [<ffffffff8136f1fe>] byt_gpio_get_direction+0x3e/0x80 [<ffffffff813740a9>] gpiochip_add_data+0x319/0x7d0 [<ffffffff81631723>] ? _raw_spin_unlock_irqrestore+0x43/0x70 [<ffffffff8136fe3b>] byt_pinctrl_probe+0x2fb/0x620 [<ffffffff8142fb0c>] platform_drv_probe+0x3c/0xa0 ... Based on the diff it looks like the problem was introduced in commit 71e6ca61 ("pinctrl: baytrail: Register pin control handling") but I wasn't able to verify that empirically as the parent commit just oopsed when I tried to boot it. Cc: Cristina Ciocan <cristina.ciocan@intel.com> Fixes: 71e6ca61 ("pinctrl: baytrail: Register pin control handling") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Mika Westerberg authored
commit c538b943 upstream. Dell XPS 13 (and maybe some others) uses a GPIO (CPU_GP_1) during suspend to explicitly disable USB touchscreen interrupt. This is done to prevent situation where the lid is closed the touchscreen is left functional. The pinctrl driver (wrongly) assumes it owns all pins which are owned by host and not locked down. It is perfectly fine for BIOS to use those pins as it is also considered as host in this context. What happens is that when the lid of Dell XPS 13 is closed, the BIOS configures CPU_GP_1 low disabling the touchscreen interrupt. During resume we restore all host owned pins to the known state which includes CPU_GP_1 and this overwrites what the BIOS has programmed there causing the touchscreen to fail as no interrupts are reaching the CPU anymore. Fix this by restoring only those pins we know are explicitly requested by the kernel one way or other. Link: https://bugzilla.kernel.org/show_bug.cgi?id=176361Reported-by:
AceLan Kao <acelan.kao@canonical.com> Tested-by:
-
Ville Syrjälä authored
commit ff856051 upstream. Apparently trying to poke a disabled or non-existent APIC leads to a box that doesn't even boot. Let's not do that. No real clue if this is the right fix, but at least my P3 machine boots again. Signed-off-by:
-
Alex Thorlton authored
commit caef78b6 upstream. Some time ago, we brought our UV BIOS callback code up to speed with the new EFI memory mapping scheme, in commit: d1be84a2 ("x86/uv: Update uv_bios_call() to use efi_call_virt_pointer()") By leveraging some changes that I made to a few of the EFI runtime callback mechanisms, in commit: 80e75596 ("efi: Convert efi_call_virt() to efi_call_virt_pointer()") This got everything running smoothly on UV, with the new EFI mapping code. However, this left one, small loose end, in that EFI_OLD_MEMMAP (a.k.a. efi=old_map) will no longer work on UV, on kernels that include the aforementioned changes. At the time this was not a major issue (in fact, it still really isn't), but there's no reason that EFI_OLD_MEMMAP *shouldn't* work on our systems. This commit adds a check into uv_bios_call(), to see if we have the EFI_OLD_MEMMAP bit set in efi.flags. If it is set, we fall back to using our old callback method, which uses efi_call() directly on the __va() of our function pointer. Signed-off-by:
Alex Thorlton <athorlton@sgi.com> Acked-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mike Travis <travis@sgi.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1476928131-170101-1-git-send-email-athorlton@sgi.comSigned-off-by:
-
Jiri Slaby authored
commit 8678654e upstream. gcc 7 warns: arch/x86/kvm/ioapic.c: In function 'kvm_ioapic_reset': arch/x86/kvm/ioapic.c:597:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] And it is right. Memset whole array using sizeof operator. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [Added x86 subject tag] Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Dan Williams authored
commit 23446cb6 upstream. Commit: 917db484 ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") ... fixed up the broken manipulations of max_pfn in the presence of E820_PRAM ranges. However, it also broke the sanitize_e820_map() support for not merging E820_PRAM ranges. Re-introduce the enabling to keep resource boundaries between consecutive defined ranges. Otherwise, for example, an environment that boots with memmap=2G!8G,2G!10G will end up with a single 4G /dev/pmem0 device instead of a /dev/pmem0 and /dev/pmem1 device 2G in size. Reported-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhang Yi <yizhan@redhat.com> Cc: linux-nvdimm@lists.01.org Fixes: 917db484 ("x86/boot: Fix kdump, cleanup aborted E820_PRAM max_pfn manipulation") Link: http://lkml.kernel.org/r/147629530854.10618.10383744751594021268.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Bart Van Assche authored
commit bbb427e3 upstream. Unlocking a mutex twice is wrong. Hence modify blkcg_policy_register() such that blkcg_pol_mutex is unlocked once if cpd == NULL. This patch avoids that smatch reports the following error: block/blk-cgroup.c:1378: blkcg_policy_register() error: double unlock 'mutex:&blkcg_pol_mutex' Fixes: 06b285bd ("blkcg: fix blkcg_policy_data allocation bug") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Sachin Prabhu authored
commit d171356f upstream. Patch a6b5058f results in -EREMOTE returned by is_path_accessible() in cifs_mount() to be ignored which breaks DFS mounting. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Steve French authored
commit 24df1483 upstream. Cleanup some missing mem frees on some cifs ioctls, and clarify others to make more obvious that no data is returned. Signed-off-by:
-
Steve French authored
commit 18dd8e1a upstream. [CIFS] We had cases where we sent a SMB2/SMB3 setinfo request with all timestamp (and DOS attribute) fields marked as 0 (ie do not change) e.g. on chmod or chown. Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Steve French authored
commit fa70b87c upstream. GUIDs although random, and 16 bytes, need to be generated as proper uuids. Signed-off-by:
David Goebels <davidgoe@microsoft.com> Signed-off-by:
-
Steve French authored
commit c2afb814 upstream. Signed-off-by:
-
Steve French authored
commit 9742805d upstream. In debugging smb3, it is useful to display the number of credits available, so we can see when the server has not granted sufficient operations for the client to make progress, or alternatively the client has requested too many credits (as we saw in a recent bug) so we can compare with the number of credits the server thinks we have. Add a /proc/fs/cifs/DebugData line to display the client view on how many credits are available. Signed-off-by:
Germano Percossi <germano.percossi@citrix.com> Signed-off-by:
-
Steve French authored
commit 3afca265 upstream. Remove the global file_list_lock to simplify cifs/smb3 locking and have spinlocks that more closely match the information they are protecting. Add new tcon->open_file_lock and file->file_info_lock spinlocks. Locks continue to follow a heirachy, cifs_socket --> cifs_ses --> cifs_tcon --> cifs_file where global tcp_ses_lock still protects socket and cifs_ses, while the the newer locks protect the lower level structure's information (tcon and cifs_file respectively). Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by:
-
