- 08 Mar, 2016 8 commits
-
-
James Simmons authored
Using proc_call_handler as a function name is way too generic. Rename to lprocfs_call_handler to avoid possible collisions. Signed-off-by:
James Simmons <jsimmons@infradead.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
James Simmons authored
The ln_refcount test was changed into an assert. Signed-off-by:
-
James Nunez authored
Several error messages are missing newline characters at the end of the message. Newlines are added where necessary and other minor corrections; no punctuation at the end of an error message, add a return code to the end of error messages, device name at the beginning, etc. There are just a couple of places where newlines are removed and this is only in LDLM_DEBUG_NOLOCK. The definition of LDLM_DEBUG_NOLOCK already has a newline in it and resulted in double newlines printed. Signed-off-by:
James Nunez <james.a.nunez@intel.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4871 Reviewed-on: http://review.whamcloud.com/10000Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Reviewed-by:
John L. Hammond <john.hammond@intel.com> Reviewed-by:
Cliff White <cliff.white@intel.com> Signed-off-by:
-
Sebastien Buisson authored
Fix 'data race condition' defects found by Coverity version 6.5.0: Data race condition (MISSING_LOCK) Accessing variable without holding lock. Elsewhere, this variable is accessed with lock held. Signed-off-by:
Sebastien Buisson <sbuisson@ddn.com> Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744 Reviewed-on: http://review.whamcloud.com/6568Reviewed-by:
Bob Glossman <bob.glossman@intel.com> Reviewed-by:
-
Sebastien Buisson authored
Fix 'NULL pointer dereference' defects found by Coverity version 6.5.3: Dereference after null check (FORWARD_NULL) For instance, Passing null pointer to a function which dereferences it. Dereference before null check (REVERSE_INULL) Null-checking variable suggests that it may be null, but it has already been dereferenced on all paths leading to the check. Dereference null return value (NULL_RETURNS) The following fixes for the LNet layer are broken out of patch http://review.whamcloud.com/4720. Signed-off-by:
Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by:
Oleg Drokin <oleg.drokin@intel.com> Signed-off-by:
-
Sebastien Buisson authored
Fix 'data race condition' defects found by Coverity version 6.5.0: Data race condition (MISSING_LOCK) Accessing variable without holding lock. Elsewhere, this variable is accessed with lock held. Signed-off-by:
Liang Zhen <liang.zhen@intel.com> Reviewed-by:
-
Liang Zhen authored
Incoming lnet message can be delayed for seconds if it can match any of LNet Delay Rules. User can add/remove/list Delay Rule by lctl commands: - lctl net_delay_add Add a new Delay Rule to LNet, options <-s | --source SRC_NID> <-d | --dest DST_NID> <<-r | --rate RATE_NUMBER> <-i | --interlval SECONDS>> <-l | --latency DELAY_LATENCY> - lctl net_delay_del Remove matched Delay Rule from LNet, options: <[-a | --all] | <-s | --source SRC_NID> <-d | --dest DST_NID>> - lctl net_delay_list List all Delay Rules in LNet - lctl net_delay_reset Reset statistic counters for all Delay Rules Signed-off-by:
Amir Shehata <amir.shehata@intel.com> Reviewed-by:
Bobi Jam <bobijam@gmail.com> Reviewed-by:
-
Liang Zhen authored
This is implementation of LNet Drop Rule, which can randomly drop LNet messages at specified rate. LNet Drop Rule can only be applied to receive side of message. User can add drop_rule either on end point of cluster (client/server) or on LNet routers. Here are lctl command to control LNet Drop Rules: - net_drop_add -s SRC_NID -d DEST_NID --rate VALUE drop 1/@VALUE of messages from @SRC_NID to @DEST_NID - net_drop_del -s SRC_NID -d DEST_NID remove all drop rules from @SRC_NID to @DEST_NID - net_drop_list list all drop rules on current node Examples: - lctl net_drop_add -s *@o2ib0 -d 192.168.1.102@tcp 1000 add new drop rule, it will drop 1/1000 messages from network o2ib0 to 192.168.1.102@tcp - lctl net_drop_add -s 10.8.6.123@o2ib1 -d * 500 add new drop rule, it will drop 1/500 messages from 10.8.6.123@o2ib1 to all nodes Signed-off-by:
Johann Lombardi <johann.lombardi@intel.com> Reviewed-by:
-
- 05 Mar, 2016 27 commits
-
-
Arnd Bergmann authored
The icn, act2000 and pcbit drivers are all for very old hardware, and it is highly unlikely that anyone is actually still using them on modern kernels, if at all. All three drivers apparently are for hardware that predates PCI being the common connector, as they are ISA-only and active PCI ISDN cards were widely available in the 1990s. Looking through the git logs, it I cannot find any indication of a patch to any of these drivers that has been tested on real hardware, only cleanups or global API changes. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Karsten Keil <isdn@linux-pingi.de> Signed-off-by:
-
Arnd Bergmann authored
The icn driver currently produces an unconditional #warning whenever we build it, introduced by Karsten Keil back in 2003: #warning TODO test headroom or use skb->nb to flag ACK Karsten's original commit (from BitKeeper) contains this description: - here are lot of bugs left, so ISDN is not stable yet but I think it's really time to fix it, even if it need some cycles to get it right (normally I'm only send patches if it works 100% for me). - I add some additional #warnings to address places which need fixing (I hope that some of the other ISDN developer jump in) Apparently this has not happened, and it is unlikely that it ever will, given that the driver doesn't seem to work. No substantial bug fixes other than janitorial cleanups have happened in the driver since then, and I see no indication that anyone who patched it had the hardware. We should probably either remove the driver, or remove all of i4l, but for now, this shuts up the distracting #warning by turning it into a comment. Signed-off-by: -
Ian Abbott authored
The kernel-doc comment for `struct comedi_krange` refers to the macro constant `RF_external`. It should be `RF_EXTERNAL`, so fix it. It also documents the value of the constant as `(1 << 8)`, but the macro now expands to the hexadecimal constant `0x100`, so use that as the documented value. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Ian Abbott authored
The "comedi.h" file is part of the user API for COMEDI devices, and is intended to be migrated to "include/uapi/linux". The `BIT` macro from "include/linux/bitops.h" should not be used there. Replace the use of the `BIT` macro with hexadecimal constants of the same value. The `BIT` macro replaced expressions of the form `(1 << N)` in this file originally, but reverting back to that form would encourage patches changing them back to use the `BIT` macro. Signed-off-by:
-
Rasmus Linusson authored
Reorder comments to keep 80 character limit Signed-off-by:
Rasmus Linusson <rasmus@linusson.org> Signed-off-by:
-
Rasmus Linusson authored
Add asterisks to multi-line comments currently missing them Signed-off-by:
-
Bhumika Goyal authored
The functions s626_get_clk_mult, s626_get_clk_mult, s626_get_enc_mode, s626_set_index_pol are not used anywhere in the kernel so they can be removed. This also cleans the code. Grepped to find the occurences. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Replace pci_[alloc|free]_consistent occurences with dma_[alloc|free]_coherent. The Coccinelle semantic patch that was used to make some of these changes is as follows: @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_KERNEL ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_KERNEL ) ) alloc_and_init_dma_members does not affect the interrupt status and is only called by auto_attach, which also does not affect the interrupt status. auto_attach() also contains a call to comedi_alloc_devpriv() which calls kzalloc with GFP_KERNEL flag. Thus, there seems to be no danger that dma_alloc_coherent can be called with interrupts turned off, and GFP_KERNEL can be used. Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Janani Ravichandran authored
Remove NULL check before kfree as it is not needed. Signed-off-by:
Janani Ravichandran <janani.rvchndrn@gmail.com> Signed-off-by:
-
Philippe Loctaux authored
Makes the comment blocks start with /* on separate lines, and end with */ on separate lines as well, starting with * for each comment lines. Signed-off-by:
Philippe Loctaux <phil@philippeloctaux.com> Reviewed-by:
-
Bhaktipriya Shridhar authored
Occurences of the computation (x +d/2)/d can be replaced with the macro DIV_ROUND_CLOSEST. This was detected by the following Coccinelle script. @@ expression e1,e2; @@ ( - ((e1) + e2/2) / (e2) + DIV_ROUND_CLOSEST(e1,e2) | - ((e1) + (e2/2)) / (e2) + DIV_ROUND_CLOSEST(e1,e2) ) Since some lines exceeded the 80 character limit, some changes were made by hand. Signed-off-by:
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by:
-
Alan authored
It's not trivial to just post up a fix, so add it to the TODO list and ensure it doesn't get lost. Signed-off-by: -
Bhumika Goyal authored
The macro random_ether_addr is calling the function eth_random_addr. Therefore, the call to random_ether_addr can be replaced with eth_random_addr. Done using coccinelle: @@ expression addr; @@ - random_ether_addr(addr); + eth_random_addr(addr); Signed-off-by:
-
Bhumika Goyal authored
This patch replaces ternary operator with macro min as it shorter and thus increases code readability. Macro min return the minimum of the two compared values. Made a semantic patch for changes: @@ type T; T x; T y; @@ ( - x < y ? x : y + min(x,y) | - x > y ? x : y + max(x,y) ) Signed-off-by:
-
Amitoj Kaur Chawla authored
With concurrency managed workqueues, use of dedicated workqueues can be replaced by using system_wq. Drop usb_tx_wq and usb_rx_wq by using system_wq. Since there are multiple work items per udev but different udevs do not need to be ordered, increase of concurrency level by switching to system_wq should not break anything. cancel_work_sync() is used to ensure that work is not pending or executing on any CPU. Lastly, since all devices are suspended, which shutdowns the work items before the driver can be unregistered, it is guaranteed that no work item is pending or executing by the time exit path runs. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Dan Carpenter authored
We know "len" is not zero because we tested for that at the beginning of the function so this test can be removed. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
"size" here should be unsigned, otherwise we might end up trying to copy negative bytes in gdm_wimax_ioctl_get_data() resulting in an information leak. Reported-by:
Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by:
-
Dan Carpenter authored
We pad the start of this buffer with 256 bytes of padding. It's not clear to me exactly what's going on or how it's used but let's zero it out. Signed-off-by:
-
Dan Carpenter authored
We had an underflow bug here and I think I fixed it but we may as well be proactive and make "len" unsigned to be double sure. Signed-off-by:
-
Dan Carpenter authored
The value of "group" comes from "idx" in __gdm_wimax_event_send(): if (sscanf(e->dev->name, "wm%d", &idx) == 1) Smatch marks sscanf values as user controlled. It's supposed to be a number in 0-30 range. We cap the upper bound but allow negatives. Fix this by making it type u16 instead. Signed-off-by:
-
Dan Carpenter authored
If nlh->nlmsg_len is less than ND_IFINDEX_LEN we end up trying to memcpy a negative size. I also re-ordered slighty the condition to make it more uniform. Signed-off-by:
-
Tapan Prakash T authored
drivers: staging: rtl8712: rtl871x_xmit.c: Fix Comparisons should place the constant on the right side of the test warning Fixed checkpatch.pl warning 'Comparisons should place the constant on the right side of the test' Signed-off-by:
Tapan Prakash T <tapanprakasht@gmail.com> Signed-off-by:
-
Alan authored
If 32 bytes of non zero are passed in pdata->pointer then the mac_pton function will run off the end of the buffer. Make sure we always have a terminated string kernel side. Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Amitoj Kaur Chawla authored
Remove unnecessary test on synth->alive since it has already been tested previously. This fixes the following smatch warning: drivers/staging/speakup/synth.c:182 spk_synth_is_alive_restart() warn: we tested 'synth->alive' before and it was 'false' Signed-off-by:
-
Alison Schofield authored
Remove multiple assignments by factorizing. Coccinelle semantic patch used: @@ identifier x,y; constant z; @@ - x=y=z; + x=z; + y=z; Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Signed-off-by:
-
Dilek Uzulmez authored
Add space around operator '|'. Problem found using checkpatch.pl CHECK: spaces preferred around that '|' (ctx:VxV) Signed-off-by:
Dilek Uzulmez <dilekuzulmez@gmail.com> Signed-off-by:
-
James Simmons authored
Originally the function cfs_str2num_check used simple_strtoul but has been updated to kstrtoul. The string passed into cfs_str2num_check can be a very complex, for example we could have 10.37.202.[59-61]. When simple_strtoul was used the first number until we hit a non-digit character could be extracted but testing showed that kstrtoul will not return any value if it detects any non-digit character. Because of this change in behavior a different approach is needed to handle these types of complex strings. The use of sscanf was investigated to see if it could be used to extract numbers from the passed in string but unlike its glibc counterpart the kernel version also just reported a error with no results if a non-digit value in the string was encountered. Another possible approach would be to use __parse_int directly but that class of functions is not exported by the kernel. So the approach in this patch is to scan the string passed in for the first non-digit character and replace that character with a '\0' so kstrtoul can be used. Once completed the original character is restored. We also restore a original behavior that was removed to return 0 when we encounter any non digit character before the nob count. Signed-off-by:
-
- 04 Mar, 2016 5 commits
-
-
Chaehyun Lim authored
It is more readable than multiple if-else statement. Signed-off-by:
Chaehyun Lim <chaehyun.lim@gmail.com> Signed-off-by:
-
Chaehyun Lim authored
This patch removes unnecessary comments because enum cfg_cmd_type shows each command type without it. Signed-off-by:
-
Chaehyun Lim authored
This patch adds a new enum cfg_type_cmd to change hard-coded command type. Signed-off-by:
-
Chaehyun Lim authored
This patch renames hardwareProductVersion to hw_product_version to avoid camelcase. Signed-off-by:
-
Chaehyun Lim authored
This patch removes commented codes in struct wilc_cfg_str. Signed-off-by:
-
