- 04 Mar, 2010 40 commits
-
-
Bernie Thompson authored
Add dynamic modeset support udlfb uses EDID to find the monitor’s preferred mode udlfb no longer has fixed mode tables – it’s able to set any mode dynamically, from the standard VESA timing characteristics of the monitor. Draws from probe and setmode code of both displaylink-mod 0.3 branch of Roberto De Ioris, and Jaya Kumar's displaylinkfb. Lays foundation for defio support and making backbuffer optional. With additional changes to minimize diffs and clean for checkpatch.pl style. Does not yet include new ioctls or refcount/mutex code from displaylink-mod. Tested to work with existing xf-video-displaylink X server unmodified. Signed-off-by:
Bernie Thompson <bernie@plugable.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Greg Kroah-Hartman authored
Now it will build with the rest of the kernel Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Greg Kroah-Hartman authored
Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Greg Kroah-Hartman authored
This is needed so the code properly builds Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: -
Scott Smedley authored
This is a driver for the DT3155 Digitizer Signed-off-by:
Scott Smedley <ss@aao.gov.au> Signed-off-by:
-
Radu Voicilas authored
Signed-off-by:
Radu Voicilas <rvoicilas@gmail.com> Signed-off-by:
-
Radu Voicilas authored
Signed-off-by:
-
Radu Voicilas authored
Changed all the comments to conform to the standard, aligned register values. Signed-off-by:
-
Radu Voicilas authored
Fixes to the way code looks. Signed-off-by:
-
david woo authored
This patch should allow the driver to consume a lot less power. Signed-off-by:
david woo <xinhua_wu@realsil.com.cn> Signed-off-by:
-
Radu Voicilas authored
dot11d.h needed a good refactoring - I've dropped some of the // comments or transformed them to match the kernel documentation. r8180_93cx6.h - fixed a little bit the copyright section. Signed-off-by:
-
Huang Weiyi authored
Remove unused #include <linux/version.h>('s) in drivers/staging/ramzswap/ramzswap_drv.c Signed-off-by:Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by:
-
Huang Weiyi authored
Remove duplicated #include('s) in drivers/staging/wlags49_h2/wl_pci.c Signed-off-by: -
Ameya Palande authored
Remove <linux/device.h> which is included twice Signed-off-by:
Ameya Palande <2ameya@gmail.com> Signed-off-by:
-
Andrew Lunn authored
So that the configuration hierarchy is correct, set the debug option to have the same base as the main BATMAN option. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Andrew Lunn authored
Bug found and fixed in origional version by Linus Luessing. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Linus Luessing <linus.luessing@web.de> Signed-off-by:
-
Andrew Lunn authored
It does not matter if the interface is to be activated or not, we must read the packet in order that it be discarded. Signed-off-by:
-
Andrew Lunn authored
Without this change we spam the kernel log on every packet received on any other interface when an interface has been added, but is not yet active, ie UP. Signed-off-by:
-
Andrew Lunn authored
Break up a lot of the big functions up into many smaller ones. This helps with readability and there is now a lot less code squashed against the right hand margin. Signed-off-by:
Simon Wunderlich <simon.wunderlich@s2003.tu-chemnitz.de> Signed-off-by:
-
Andrew Lunn authored
batman-adv used its own logging infrastructure. Replace this with standard kernel logging, printk(), with compile time and runtime options to enable/disable different debug levels. Signed-off-by:
-
Peter Huewe authored
This almost trivial patch replaces the hardcoded values for the vendor and device ids with defines, as they are used in drivers/hid/hid-ids.h For me this seems to be more consistent, however as drivers/hid/hid-ids.h is not within the default include directory I had to redefine the defines here (maybe move the hid-ids.h to include/linux ?) Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Ameya Palande authored
Rearrange code and cleanup the information to get rid of checkpatch.pl line > 80 chars complaints. Signed-off-by:
-
Ameya Palande authored
Signed-off-by:
-
Ameya Palande authored
Signed-off-by:
-
Joe Perches authored
Uncompiled. Doesn't currently build anyway. Converted MAC_FMT to %pM Converted some %02x%02x%02x%02x%02x%02x to %pm Converted MAC_ARG to direct use Removed MAC_FMT and MAC_ARG macros Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
kirjanov@gmail.com authored
Use pci_set_consistent_dma_mask() in the case of 64-bit consistent allocations. Signed-off-by:
Denis Kirjanov <kirjanov@gmail.com> Signed-off-by:
-
kirjanov@gmail.com authored
Use compare_ether_addr. Signed-off-by:
-
kirjanov@gmail.com authored
Use PCI_DEVICE_TABLE: defines array as const and puts it into the __devinitconst section. Signed-off-by:
-
kirjanov@gmail.com authored
Use dev->stats rather than adapter->stats. Signed-off-by:
-
kirjanov@gmail.com authored
No need to check pointer expicitly since it has been done in debugfs_remove() Signed-off-by:
-
kirjanov@gmail.com authored
No need type casting when using netdev_priv. Signed-off-by:
-
kirjanov@gmail.com authored
Check for valid hw address. Signed-off-by:
-
kirjanov@gmail.com authored
Convert to netdev_tx_t. Signed-off-by:
-
Martyn Welch authored
Unable to build both drivers at the same time due to classing variables that should be declared static but aren't. Signed-off-by:
Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by:
-
Martyn Welch authored
Functionality for master RMW and location monitors has been implemented. Remove the commented out structures from the original codebase. Signed-off-by:
-
Martyn Welch authored
Running checkpatch on the core VME code highlights many errors. Fix them. Signed-off-by:
-
Martyn Welch authored
Geographical addressing only works if the VME backplane supports it. There are a large number of old backplanes which do not support geographical addressing. These boards will generally report a slot ID of zero - which is an invalid ID in the slot numbering scheme. Allow the geographical address to be over-ridden on the ca91c142 so that a slot ID can be provided manually in these circumstances. Signed-off-by:
-
Martyn Welch authored
Geographical addressing only works if the VME backplane supports it. There are a large number of old backplanes which do not support geographical addressing. These boards will generally report a slot ID of zero - which is an invalid ID in the slot numbering scheme. Allow the geographical address to be over-ridden on the tsi148 so that a slot ID can be provided manually in these circumstances. Signed-off-by:
Markus Kraemer <mkraemer@e18.physik.tu-muenchen.de> Signed-off-by:
-
Martyn Welch authored
Correction of erroneous error message in vme_user.c. Signed-off-by:
-
Roel Kluin authored
This semicolon is misplaced. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
