- 17 Oct, 2013 17 commits
-
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Sachin Kamat authored
module_pci_driver removes some boilerplate and makes code simpler. Signed-off-by:
-
Sachin Kamat authored
module_pci_driver removes some boilerplate and makes code simpler. Signed-off-by:
-
Sachin Kamat authored
module_pci_driver removes some boilerplate and makes code simpler. Signed-off-by:
-
Michael Opdenacker authored
This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/common/siano/smsdvb-main.c:47:5: warning: symbol 'sms_to_guard_interval_table' was not declared. Should it be static? drivers/media/common/siano/smsdvb-main.c:54:5: warning: symbol 'sms_to_code_rate_table' was not declared. Should it be static? drivers/media/common/siano/smsdvb-main.c:63:5: warning: symbol 'sms_to_hierarchy_table' was not declared. Should it be static? drivers/media/common/siano/smsdvb-main.c:70:5: warning: symbol 'sms_to_modulation_table' was not declared. Should it be static? drivers/media/common/siano/smscoreapi.c:925:35: warning: cast to restricted __le32 drivers/media/common/siano/smscoreapi.c:926:28: warning: cast to restricted __le32 Signed-off-by:
-
Hans Verkuil authored
drivers/media/usb/dvb-usb/az6027.c:257:23: warning: symbol 'az6027_stb0899_config' was not declared. Should it be static? drivers/media/usb/dvb-usb/az6027.c:294:23: warning: symbol 'az6027_stb6100_config' was not declared. Should it be static? Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/drxk_hard.c:1086:62: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxk_hard.c:2784:63: warning: Using plain integer as NULL pointer Signed-off-by:
Antti Palosaari <crope@iki.fi> Reviewed-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/drxd_hard.c:1017:70: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxd_hard.c:1038:69: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxd_hard.c:2836:33: warning: Using plain integer as NULL pointer drivers/media/dvb-frontends/drxd_hard.c:2972:30: warning: Using plain integer as NULL pointer Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/cxd2820r_core.c:34:32: error: cannot size expression drivers/media/dvb-frontends/cxd2820r_core.c:68:32: error: cannot size expression Signed-off-by:
-
Frank Schaefer authored
Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Lad, Prabhakar authored
Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Joe Perches authored
These aren't necessary after switch and while statements. Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Krzysztof Hałasa authored
Mask v4l2_buf.flags to indicate only I/P/B frames. Signed-off-by:
Krzysztof Ha?asa <khalasa@piap.pl> Signed-off-by:
-
- 15 Oct, 2013 12 commits
-
-
Hans Verkuil authored
drivers/media/usb/tlg2300/pd-main.c:235:25: warning: incorrect type in assignment (different base types) Signed-off-by:
-
Hans Verkuil authored
drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c:31:19: warning: symbol 'cx231xx_Scenario' was not declared. Should it be static? drivers/media/usb/cx231xx/cx231xx-pcb-cfg.c:675:23: warning: cast to restricted __le32 Signed-off-by:
-
Hans Verkuil authored
drivers/media/radio/radio-keene.c:126:45: warning: dubious: !x | y Signed-off-by:
-
Hans Verkuil authored
drivers/media/radio/wl128x/fmdrv_common.c:178:6: warning: symbol 'g_st_write' was not declared. Should it be static? Signed-off-by:
-
Hans Verkuil authored
drivers/media/tuners/tuner-xc2028.c:575:24: warning: cast to restricted __le16 drivers/media/tuners/tuner-xc2028.c:686:21: warning: cast to restricted __le16 Signed-off-by:
-
Hans Verkuil authored
drivers/media/platform/timblogiw.c:763:43: warning: incorrect type in initializer (incompatible argument 3 (different signedness)) drivers/media/platform/timblogiw.c:764:43: warning: incorrect type in initializer (incompatible argument 3 (different signedness)) Signed-off-by:
-
Hans Verkuil authored
drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2871:13: warning: symbol 'pvr2_hdw_get_detected_std' was not declared. Should it be static? Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/usb/hdpvr/hdpvr-core.c:110:54: warning: incorrect type in argument 1 (different base types) drivers/media/usb/hdpvr/hdpvr-core.c:112:39: warning: invalid assignment: += drivers/media/usb/hdpvr/hdpvr-core.c:304:26: warning: Using plain integer as NULL pointer Signed-off-by:
-
Vladik Aranov authored
Dear Hans de Goede, I have Ubuntu (raring) and recently bought digital microscope eyepiece Lomo MD300. It is the same device as Future Optics MVV3000. Unfortunately it does not work out of box. Moreover drivers refused to work under Windows 7 as well leaving me only with Win Xp working system. I have had no choice but to examine what happened in USB bus and attempt to reproduce the sequence. So, i have download the source(3.8.0-30 kernel) and made required changes to driver to make my hardware work. I submit my changed files to you as maintainer of the driver so you can integrade my changes into main stream. Thanx. Hopefully my Ubuntu will work with my hardware out of box. Sincerely yours Vladik Aranov Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Antti Palosaari authored
That version of DRX-K chip supports only 2. drxk: SCU_RESULT_INVPAR while sending cmd 0x0203 with params: drxk: Warning -22 on qam_demodulator_command Signed-off-by:
-
Antti Palosaari authored
tda18271c2dd => tda18271 tda18271 is more complete than tda18271c2dd. Signed-off-by:
-
Antti Palosaari authored
Downloading new firmware for DRX-K demodulator is not obligatory but usually it offers important bug fixes compared to default firmware burned into chip rom. DRX-K demod driver will continue even without the firmware, but in that case it will print warning to system log to tip user he should install firmware. Signed-off-by:
-
- 14 Oct, 2013 11 commits
-
-
Anca Emanuel authored
Tested: Composite: http://imgur.com/Rb1TCF3 TV: http://imgur.com/KNrfsmv Firmware used: xc3028-v27.fw Not tested: audio, component, s-video, mpeg2 encoder, FM radio. For audio, it uses an CD style cable to connect to the analog "CD_IN" on the motherboard. I didn't found how to unmute it (alsamixer do not show an CD or AUX channel). Signed-off-by:
Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The Stellar firmware load routine is different. Improve it to use the default firmware, if no modprobe parameter tells otherwise. Signed-off-by:
André Roth <neolynx@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by:
-
Mauro Carvalho Chehab authored
Some messages are not clear, some are debug data, but are shown as errors, and one message is duplicated. Cleanup that mess in order to provide a cleaner log. Signed-off-by:
-
Mauro Carvalho Chehab authored
At this bugzilla and similar ones: https://bugzilla.kernel.org/show_bug.cgi?id=60645 Those debug messages were seen as errors, but they're just debug data, and are OK to appear on sms1100 and sms2270. Re-tag them to appear only if debug is enabled. Signed-off-by:
-
Luis Alves authored
This patch will fix the situation where the mutex was left in a locked state if for some reason the FE init failed. Signed-off-by:
Luis Alves <ljalvs@gmail.com> Reviewed-by:
-
Sachin Kamat authored
Driver core sets driver data to NULL upon failure or remove. Signed-off-by:
-
Krzysztof Hałasa authored
On certain platforms a sequence of dma_map_sg() and dma_unmap_sg() discards data previously stored in the buffers. Build video headers only after the DMA is completed. Signed-off-by:
-
Krzysztof Hałasa authored
Signed-off-by:
-
Krzysztof Hałasa authored
Signed-off-by:
-
Krzysztof Hałasa authored
[m.chehab@samsung.com: Fix CodingStyle: don't use 2 statements on just one line] Signed-off-by:
-
