- 21 Aug, 2019 40 commits
-
-
Vlad Buslov authored
Allow tracing neigh state during neigh update task that is executed on workqueue and is scheduled by neigh state change event. Usage example: ># cd /sys/kernel/debug/tracing ># echo mlx5:mlx5e_rep_neigh_update >> set_event ># cat trace ... kworker/u48:7-2221 [009] ...1 1475.387435: mlx5e_rep_neigh_update: netdev: ens1f0 MAC: 24:8a:07:9a:17:9a IPv4: 1.1.1.10 IPv6: ::ffff:1.1.1.10 neigh_connected=1 Added corresponding documentation in Documentation/networking/device-driver/mellanox/mlx5.rst Signed-off-by:Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Vlad Buslov authored
Allow tracing result of neigh used value update task that is executed periodically on workqueue. Usage example: ># cd /sys/kernel/debug/tracing ># echo mlx5:mlx5e_tc_update_neigh_used_value >> set_event ># cat trace ... kworker/u48:4-8806 [009] ...1 55117.882428: mlx5e_tc_update_neigh_used_value: netdev: ens1f0 IPv4: 1.1.1.10 IPv6: ::ffff:1.1.1.10 neigh_used=1 Added corresponding documentation in Documentation/networking/device-driver/mellanox/mlx5.rst Signed-off-by: -
Dmytro Linkin authored
Implemented following tracepoints: 1. Configure flower (mlx5e_configure_flower) 2. Delete flower (mlx5e_delete_flower) 3. Stats flower (mlx5e_stats_flower) Usage example: ># cd /sys/kernel/debug/tracing ># echo mlx5:mlx5e_configure_flower >> set_event ># cat trace ... tc-6535 [019] ...1 2672.404466: mlx5e_configure_flower: cookie=0000000067874a55 actions= REDIRECT Added corresponding documentation in Documentation/networking/device-driver/mellanox/mlx5.rst Signed-off-by: -
Vlad Buslov authored
To remove dependency on rtnl lock and prevent neigh update code from accessing uninitialized flows when executing concurrently with tc, extend mlx5e_tc_flow with 'init_done' completion. Modify helper mlx5e_take_all_encap_flows() to wait for flow completion after obtaining reference to it. Modify mlx5e_tc_encap_flows_del() and mlx5e_tc_encap_flows_add() to skip flows that don't have OFFLOADED flag set, which can happen if concurrent flow initialization failed. This commit finishes neigh update refactoring for concurrent execution started in previous change in this series. Signed-off-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
In order to remove dependency on rtnl lock and allow neigh update workqueue task to execute concurrently with tc, refactor mlx5e_rep_neigh_update() for concurrent execution: - Lock encap table when accessing encap entry to prevent concurrent changes. To do this properly, the initial encap state check is moved from mlx5e_rep_neigh_update() into mlx5e_rep_update_flows() to be performed under encap_tbl_lock protection. - Wait for encap to be fully initialized before accessing it by means of 'res_ready' completion. - Add mlx5e_take_all_encap_flows() helper which is used to construct a temporary list of flows and efi indexes that is used to access current encap data in flow which can be attached to multiple encaps simultaneously. Release the flows from temporary list after encap_tbl_lock critical section. This is necessary because mlx5e_flow_put() can't be called while holding encap_tbl_lock. - Modify mlx5e_tc_encap_flows_add() and mlx5e_tc_encap_flows_del() to work with user-provided list of flows built by mlx5e_take_all_encap_flows(), instead of traversing encap flow list directly. This is first step in complex neigh update refactoring, which is finished by following commit in this series. Signed-off-by:
-
Vlad Buslov authored
In order to remove dependency on rtnl lock and allow neigh used value update workqueue task to execute concurrently with tc, refactor mlx5e_tc_update_neigh_used_value() for concurrent execution: - Lock encap table when accessing encap entry to prevent concurrent changes. - Save offloaded encap flows to temporary list and release them after encap entry is updated. Add mlx5e_put_encap_flow_list() helper which is intended to be shared with neigh update code in following patch in this series. This is necessary because mlx5e_flow_put() can't be called while holding encap_tbl_lock. Signed-off-by:
-
Vlad Buslov authored
Rcu-ify mlx5e_neigh_hash_entry->encap_list by changing operations on encap list to their rcu counterparts and extending encap structure with rcu_head to free the encap instances after rcu grace period. Use rcu read lock when traversing encap list. Implement helper mlx5e_get_next_valid_encap() function that is used by mlx5e_tc_update_neigh_used_value() to safely iterate over valid entries of nhe->encap_list. Signed-off-by:
Jianbo Liu <jianbol@mellanox.com> Reviewed-by:
-
Vlad Buslov authored
To remove dependency on rtnl lock, always take neigh update encap lock when modifying neigh update hash table and list. Originally, this lock was only used to synchronize with netevent handler function, which is called from bh context and cannot use rtnl lock for synchronization. Take lock in encap entry attach function to prevent concurrent modifications of neigh update hash table and list. Taking the encap lock when creating new nhe introduces a problem that we need to allocate new entry with sleeping GFP_KERNEL flag while holding a spinlock. However, since previous patch in this series has already converted lookup in netevent handler function to user rcu read lock instead of encap lock, we can safely convert the lock type to mutex. Signed-off-by:
-
Vlad Buslov authored
To remove dependency on rtnl lock and to allow unlocked iteration over list of neigh hash entries, extend nhe with rcu. Change operations on neigh list to their rcu counterparts and free neigh hash entry with rcu timeout. Introduce mlx5e_get_next_nhe() helper that is used to iterate over rcu neigh list with reference to nhe taken. Signed-off-by:
-
Vlad Buslov authored
Neigh entry has reference counter, however it is only used when scheduling neigh update event. In all other cases reference to neigh entry is not taken while working with it. Neigh code relies on synchronization provided by rtnl lock and uses encap list size as implicit reference counter. To remove dependency on rtnl lock, always take reference to neigh entry while using it. Remove neigh entry from hash table and delete it only when reference counter reaches zero. This can result spurious neigh update events, when there is an event on entry that has zero encaps attached. However, such events are rare and properly handled by neigh update handler. Extend encap entry with reference to neigh hash entry in order to be able to directly release it when encap is detached, instead of lookup nhe by key through hash table. Extend nhe with reference to device priv structure to guarantee correctness when nhe is used with stack devices, bond setup, in which case it is non-trivial to determine correct device when releasing the nhe. Signed-off-by:
-
Vlad Buslov authored
As a preparation for following refactoring that removes rtnl lock dependency from neigh hash entry handlers, extract code that enqueues neigh update work into standalone function. This commit doesn't change functionality. Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
YueHaibing authored
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2019-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg: ==================== Here are a few groups of changes: * EDMG channel support (60 GHz, just a single patch) * initial 6/7 GHz band support (Arend) * association timestamp recording (Ben) * rate control improvements for better performance with the mt76 driver (Felix) * various fixes for previous HE support changes (John) ==================== Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add devlink-trap support This patchset adds devlink-trap support in mlxsw. Patches #1-#4 add the necessary APIs and defines in mlxsw. Patch #5 implements devlink-trap support for layer 2 drops. More drops will be added in the future. Patches #6-#7 add selftests to make sure that all the new code paths are exercised and that the feature is working as expected. ==================== Signed-off-by: -
Ido Schimmel authored
Test generic devlink-trap functionality over mlxsw. These tests are not specific to a single trap, but do not check the devlink-trap common infrastructure either. Currently, the only test case is device deletion (by reloading the driver) while packets are being trapped. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Test that each supported packet trap is triggered under the right conditions and that packets are indeed dropped and not forwarded. Signed-off-by:
-
Ido Schimmel authored
Register supported packet traps (layer 2 drops only, currently) and associated trap group with devlink during driver initialization. The amount of traffic generated by these packet drop traps is capped at 10Kpps to ensure the CPU is not overwhelmed by incoming packets. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
Discard trap groups are defined in a different enum so that they could all share the same policer ID: MLXSW_REG_HTGT_TRAP_GROUP_MAX + 1. Signed-off-by:
-
Ido Schimmel authored
Add the trap IDs used to report layer 2 drops. Signed-off-by:
-
Ido Schimmel authored
Subsequent patches will add discard traps support in mlxsw. The driver cannot configure such traps with a normal trap action, but needs to use exception trap action, which also increments an error counter. On the other hand, when these traps are initialized or set to drop action, they should use the default drop action set by the firmware. This guarantees that when the feature is disabled we get the exact same behavior as before the feature was introduced. Signed-off-by:
-
Ido Schimmel authored
Up until now the action of a trap was never changed during its lifetime. This is going to change by subsequent patches that will allow devlink to control the action of certain traps. Signed-off-by:
-
Felix Fietkau authored
On some devices that only support static rate fallback tables sending rate control probing packets can be really expensive. Probing lower rates can already hurt throughput quite a bit. What hurts even more is the fact that on mt76x0/mt76x2, single probing packets can only be forced by directing packets at a different internal hardware queue, which causes some heavy reordering and extra latency. The reordering issue is mainly problematic while pushing lots of packets to a particular station. If there is little activity, the overhead of probing is neglegible. The static fallback behavior is designed to pretty much only handle rate control algorithms that use only a very limited set of rates on which the algorithm switches up/down based on packet error rate. In order to better support that kind of hardware, this patch implements a different approach to rate probing where it switches to a slightly higher rate, waits for tx status feedback, then updates the stats and switches back to the new max throughput rate. This only triggers above a packet rate of 100 per stats interval (~50ms). For that kind of probing, the code has to reduce the set of probing rates a lot more compared to single packet probing, so it uses only one packet per MCS group which is either slightly faster, or as close as possible to the max throughput rate. This allows switching between similar rates with different numbers of streams. The algorithm assumes that the hardware will work its way lower within an MCS group in case of retransmissions, so that lower rates don't have to be probed by the high packets per second rate probing code. To further reduce the search space, it also does not probe rates with lower channel bandwidth than the max throughput rate. At the moment, these changes will only affect mt76x0/mt76x2. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190820095449.45255-4-nbd@nbd.nameSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
Use the first supported rate instead of 0 (which can be invalid) Signed-off-by:
-
Felix Fietkau authored
On hardware with static fallback tables (e.g. mt76x2), rate probing attempts can be very expensive. On such devices, avoid sampling rates slower than the per-group max throughput rate, based on the assumption that the fallback table will take care of probing lower rates within that group if the higher rates fail. To further reduce unnecessary probing attempts, skip duplicate attempts on rates slower than the max throughput rate. Signed-off-by:
-
