* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-post-merge-2.6:
  [SCSI] target: Add LIO target core v4.0.0-rc6
  [SCSI] sd,sr: kill compat SDEV_MEDIA_CHANGE event
  [SCSI] sd: implement sd_check_events()

Fixes this build error:

 ERROR: "arbitrary_virt_to_machine" [drivers/xen/xen-gntdev.ko] undefined!
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit dfe63bb0.

This commit was causing nouveau not to work properly, for -rc1 I'd
prefer it worked and we can look if this is useful for 2.6.39.

Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi/amba-pl022: fixing compilation warning.
  spi: Enable SPI driver for S5P6440 and S5P6450
  mmc: sdhci-of: fix build on non-powerpc platforms
  spi/imx: Add i.MX53 support
  spi/dw_spi: don't treat NULL clk as an error
  spi: tegra: don't treat NULL clk as an error

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: prevent NMI timeouts in cmn_err
  xfs: Add log level to assertion printk
  xfs: fix an assignment within an ASSERT()
  xfs: fix error handling for synchronous writes
  xfs: add FITRIM support
  xfs: ensure log covering transactions are synchronous
  xfs: serialise unaligned direct IOs
  xfs: factor common write setup code
  xfs: split buffered IO write path from xfs_file_aio_write
  xfs: split direct IO write path from xfs_file_aio_write
  xfs: introduce xfs_rw_lock() helpers for locking the inode
  xfs: factor post-write newsize updates
  xfs: factor common post-write isize handling code
  xfs: ensure sync write errors are returned

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Encourage move to dev_pm_ops by warning on use of legacy methods
  i2c: Factor out runtime suspend checks from PM operations
  i2c: Unregister dummy devices last on adapter removal

The compilation of drivers/acpi/pci_root.c fails if
CONFIG_PCIEPORTBUS is unset.  Fix the problem.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 9cd03144 (ACPI / ACPICA: Fix global lock acquisition) forgot to
initialize the spinlock it added.  Fix that.
Reported-and-tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

clk_freq is used uninitialized in pl022_setup routine. This patch
fix compilation warning for using uninitialized variable
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: restore multiple bd_link_disk_holder() support
  block cfq: compensate preempted queue even if it has no slice assigned
  block cfq: make queue preempt work for queues from different workload

It's indicative of a real problem, and it actually triggers with
autofs4, but the BUG_ON() is excessive.  The autofs4 case is being fixed
(to only set d_op in the ->lookup method) but not merged yet.  In the
meantime this gets the code limping along.
Reported-by: Alex Elder <aelder@sgi.com>
Cc: Ian Kent <raven@themaw.net>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  GRETH: resolve SMP issues and other problems
  GRETH: handle frame error interrupts
  GRETH: avoid writing bad speed/duplex when setting transfer mode
  GRETH: fixed skb buffer memory leak on frame errors
  GRETH: GBit transmit descriptor handling optimization
  GRETH: fix opening/closing
  GRETH: added raw AMBA vendor/device number to match against.
  cassini: Fix build bustage on x86.
  e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs
  e1000e: update Copyright for 2011
  e1000: Avoid unhandled IRQ
  r8169: keep firmware in memory.
  netdev: tilepro: Use is_unicast_ether_addr helper
  etherdevice.h: Add is_unicast_ether_addr function
  ks8695net: Use default implementation of ethtool_ops::get_link
  ks8695net: Disable non-working ethtool operations
  USB CDC NCM: Don't deref NULL in cdc_ncm_rx_fixup() and don't use uninitialized variable.
  vxge: Remember to release firmware after upgrading firmware
  netdev: bfin_mac: Remove is_multicast_ether_addr use in netdev_for_each_mc_addr
  ipsec: update MAX_AH_AUTH_LEN to support sha512
  ...

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: (62 commits)
  nfsd4: fix callback restarting
  nfsd: break lease on unlink, link, and rename
  nfsd4: break lease on nfsd setattr
  nfsd: don't support msnfs export option
  nfsd4: initialize cb_per_client
  nfsd4: allow restarting callbacks
  nfsd4: simplify nfsd4_cb_prepare
  nfsd4: give out delegations more quickly in 4.1 case
  nfsd4: add helper function to run callbacks
  nfsd4: make sure sequence flags are set after destroy_session
  nfsd4: re-probe callback on connection loss
  nfsd4: set sequence flag when backchannel is down
  nfsd4: keep finer-grained callback status
  rpc: allow xprt_class->setup to return a preexisting xprt
  rpc: keep backchannel xprt as long as server connection
  rpc: move sk_bc_xprt to svc_xprt
  nfsd4: allow backchannel recovery
  nfsd4: support BIND_CONN_TO_SESSION
  nfsd4: modify session list under cl_lock
  Documentation: fl_mylease no longer exists
  ...

Fix up conflicts in fs/nfsd/vfs.c with the vfs-scale work.  The
vfs-scale work touched some msnfs cases, and this merge removes support
for that entirely, so the conflict was trivial to resolve.

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (27 commits)
  omap4: Fix ULPI PHY init for ES1.0 SDP
  omap3: beaglexm: fix power on of DVI
  omap3: igep3: Add omap_reserve functionality
  omap3: beaglexm: fix DVI reset GPIO
  omap3: beaglexm: fix EHCI power up GPIO dir
  omap3: igep2: Add keypad support
  omap3: igep3: Fix IGEP module second MMC channel power supply
  omap3: igep3: Add USB EHCI support for IGEP module
  omap3: clocks: Fix build error 'CK_3430ES2' undeclared here
  arm: omap4: pandaboard: turn on PHY reference clock at init
  omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'
  omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared
  omap2plus: voltage: Trivial linking fix 'undefined reference'
  omap2plus: voltage: Trivial warning fix 'no return statement'
  omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask
  arm: omap: gpio: don't access irq_desc array directly
  omap2+: pm_bus: make functions used as pointers as static
  OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+
  OMAP2+: TWL: include pm header for init protos
  OMAP2+: TWL: make conversion routines static
  ...

Fix up conflicts in arch/arm/mach-omap2/board-omap3beagle.c ("DVI reset
GPIO" vs "use generic DPI panel driver")

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix ia64 build failure in pmdp_get_and_clear

Since the PM core wishes to transition away from the legacy suspend
and resume methods and since removing them makes using PM core features
like runtime PM much easier start warning when a driver is registered
using the legacy methods.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

When devices use dev_pm_ops the I2C API is implementing standard functionality
for integration with runtime PM and for checking for the presence of a per
device op. The PM core provides pm_generic_ functions implementing this
behaviour - use them to reduce coupling with future PM updates.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Remove real devices first and dummy devices last. This gives device
driver which instantiated dummy devices themselves a chance to clean
them up before we do.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Hans Verkuil <hverkuil@xs4all.nl>
Cc: stable@kernel.org

Fixes the following:
1. POLL should not enable IRQ when work is not completed
2. No locking between TX descriptor cleaning and XMIT descriptor handling
3. No locking between RX POLL and XMIT modifying control register
4. Since TX cleaning (called from POLL) is running in parallel with XMIT
   unnecessary locking is needed.
5. IRQ handler looks at RX frame status solely, this is wrong when IRQ is
   temporarily disabled (in POLL), and when IRQ is shared.
6. IRQ handler clears IRQ status, which is unnecessary
7. TX queue was stopped in preventing cause when not MAX_SKB_FRAGS+1
   descriptors were available after a SKB been scheduled by XMIT. Instead
   the TX queue is stopped first when not enough descriptors are available
   upon entering XMIT.

It was hard to split up this patch in smaller pieces since all are tied
together somehow.

Note the RX flag used in the interrupt handler does not signal that
interrupt was asserted, but that a frame was received. Same goes for TX.
Also, IRQ is not asserted when the RX flag is set before enabling IRQ
enable until a new frame is received. So extra care must be taken to
avoid enabling IRQ and all descriptors are already used, hence dead lock
will upon us. See new POLL implementation that enableds IRQ then look at
the RX flag to determine if one or more IRQs may have been missed. TX/RX
flags are cleared before handling previously enabled descriptors, this
ensures that the RX/TX flags are valid when determining if IRQ should be
turned on again.

By moving TX cleaning from POLL to XMIT in the standard case, removes some
locking trouble. Enabling TX cleaning from poll only when not enough TX
descriptors are available is safe because the TX queue is at the same time
stopped, thus XMIT will not be called. The TX queue is woken up again when
enough descriptrs are available.

TX Frames are always enabled with IRQ, however the TX IRQ Enable flag will
not be enabled until XMIT must wait for free descriptors.

Locking RX and XMIT parts of the driver from each other is needed because
the RX/TX enable bits share the same register.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Frame error interrupts must also be handled since the RX flag only indicates
successful reception, it is unlikely but the old code may lead to dead lock
if 128 error frames are recieved in a row.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A new SKB buffer should not be allocated when the old SKB is reused.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is safe to enable all fragments before enabling the first descriptor,
this way all descriptors don't have to be processed twice, added extra
memory barrier.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When NAPI is disabled there is no point in having IRQs enabled, TX/RX
should be off before clearing the TX/RX descriptor rings.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unfortunately, not all CONFIG_OF platforms provide
pci_device_to_OF_node().

Change the test to CONFIG_SPARC for now to deal with
the build regressions.
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure a new callback is added to the client's list of callbacks at most
once.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

Implement __pmd macro for ia64 too.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915/lvds: Add AOpen i915GMm-HFS to the list of false-positive LVDS
  agp/intel: Fix device names of i845 and 845G
  drm/i915: Disable GPU semaphores on SandyBridge mobile
  drm/i915/execbuffer: Clear domains before beginning reloc processing
  drm/i915/execbuffer: Reorder relocations to match new object order
  drm/i915: Fix error handler to capture the first batch after the seqno
  drm/i915: Add a module option to override the use of SSC
  drm/i915/panel: The backlight is enabled if the current value is non-zero
  drm/i915/debugfs: Correct format after changing type of err object 'size'

Commit e09b457b (block: simplify holder symlink handling) incorrectly
assumed that there is only one link at maximum.  dm may use multiple
links and expects block layer to track reference count for each link,
which is different from and unrelated to the exclusive device holder
identified by @holder when the device is opened.

Remove the single holder assumption and automatic removal of the link
and revive the per-link reference count tracking.  The code
essentially behaves the same as before commit e09b457b sans the
unnecessary kobject reference count dancing.

While at it, note that this facility should not be used by anyone else
than the current ones.  Sysfs symlinks shouldn't be abused like this
and the whole thing doesn't belong in the block layer at all.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Milan Broz <mbroz@redhat.com>
Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI/PM: Report wakeup events before resuming devices
  PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events
  PCI: sysfs: Update ROM to include default owner write access
  x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL
  x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available
  PCI/ACPI: Request _OSC control once for each root bridge (v3)
  PCI: enable pci=bfsort by default on future Dell systems
  PCI/PCIe: Clear Root PME Status bits early during system resume
  PCI: pci-stub: ignore zero-length id parameters
  x86/PCI: irq and pci_ids patch for Intel Patsburg
  PCI: Skip id checking if no id is passed
  PCI: fix __pci_device_probe kernel-doc warning
  PCI: make pci_restore_state return void
  PCI: Disable ASPM if BIOS asks us to
  PCI: Add mask bit definition for MSI-X table
  PCI: MSI: Move MSI-X entry definition to pci_regs.h

Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the
meantime been converted to not use legacy PCI power management, and thus
no longer use pci_restore_state() at all (and that caused trivial
conflicts with the "make pci_restore_state return void" patch)

* git://git.infradead.org/battery-2.6: (21 commits)
  power_supply: Add MAX17042 Fuel Gauge Driver
  olpc_battery: Fix up XO-1.5 properties list
  olpc_battery: Add support for CURRENT_NOW and VOLTAGE_NOW
  olpc_battery: Add support for CHARGE_NOW
  olpc_battery: Add support for CHARGE_FULL_DESIGN
  olpc_battery: Ambient temperature is not available on XO-1.5
  jz4740-battery: Should include linux/io.h
  s3c_adc_battery: Add gpio_inverted field to pdata
  power_supply: Don't use flush_scheduled_work()
  power_supply: Fix use after free and memory leak
  gpio-charger: Fix potential race between irq handler and probe/remove
  gpio-charger: Provide default name for the power_supply
  gpio-charger: Check result of kzalloc
  jz4740-battery: Check if platform_data is supplied
  isp1704_charger: Detect charger after probe
  isp1704_charger: Set isp->dev before anything needs it
  isp1704_charger: Detect HUB/Host chargers
  isp1704_charger: Correct length for storing model
  power_supply: Add gpio charger driver
  jz4740-battery: Protect against concurrent battery readings
  ...

flush_scheduled_work() is going away.  afs needs to make sure all the
works it has queued have finished before being unloaded and there can
be arbitrary number of pending works.  Add afs_wq and use it as the
flush domain instead of the system workqueue.

Also, convert cancel_delayed_work() + flush_scheduled_work() to
cancel_delayed_work_sync() in afs_mntpt_kill_timer().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rxrpc_workqueue isn't depended upon while reclaiming memory.  Convert
to alloc_workqueue() without WQ_MEM_RECLAIM.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: linux-afs@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fscache_submit_exclusive_op() adds an operation to the pending list if
other operations are pending.  Fix the check for pending ops as n_ops
must be greater than 0 at the point it is checked as it is incremented
immediately before under lock.
Signed-off-by: Akshat Aranya <aranya@nec-labs.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>