- 12 Apr, 2019 13 commits
-
-
Karsten Graul authored
The check for a matching ip prefix and subnet was only done for SMC-R in smc_listen_rdma_check() but not when an SMC-D connection was possible. Rename the function into smc_listen_prfx_check() and move its call to a place where it is called for both SMC variants. And add a new CLC DECLINE reason for the case when the IP prefix or subnet check fails so the reason for the failing SMC connection can be found out more easily. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Karsten Graul authored
Correct the CLC decline reason codes for internal problems to not have the sign bit set, negative reason codes are interpreted as not eligible for TCP fallback. Signed-off-by:
-
Ursula Braun authored
For nonblocking sockets move the kernel_connect() from the connect worker into the initial smc_connect part to return kernel_connect() errors other than -EINPROGRESS to user space. Reviewed-by:
-
Dongli Zhang authored
During coredump analysis, it is not easy to obtain the address of backend_info in xen-netback. So far there are two ways to obtain backend_info: 1. Do what xenbus_device_find() does for vmcore to find the xenbus_device and then derive it from dev_get_drvdata(). 2. Extract backend_info from callstack of xenwatch (e.g., netback_remove() or frontend_changed()). This patch adds a reference from xenvif to backend_info so that it would be much more easier to obtain backend_info during coredump analysis. Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
David S. Miller authored
David Miller says: ==================== SCTP: Event skb list overhaul. This patch series eliminates the explicit reference to the skb list implementation via skb->prev dereferences. The approach used is to pass a non-empty skb list around instead of an event skb object which may or may not be on a list. I'd like to thank Marcelo Leitner, Xin Long, and Neil Horman for reviewing previous versions of this series. Testing would be very much appreciated, in addition to the review of course. v4 --> v5: Rebase to net-next v3 --> v4: Fix the logic in patch #4 so that we don't miss cases where we should add event to the on-stack temp list. ==================== Signed-off-by: -
David Miller authored
Now the SKB list implementation assumption can be removed. And now that we know that the list head is always non-NULL we can remove the code blocks dealing with that as well. Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David Miller authored
Pass this, instead of an event. Then everything trickles down and we always have events a non-empty list. Then we needs a list creating stub to place into .enqueue_event for sctp_stream_interleave_1. Signed-off-by:
-
David Miller authored
This way we can make sure events sent this way to sctp_ulpq_tail_event() are on a list as well. Now all such code paths are fully covered. Signed-off-by:
-
David Miller authored
This way we can simplify the logic and remove assumptions about the implementation of skb lists. Signed-off-by:
-
David Miller authored
Inside the loop, we always start with event non-NULL. Signed-off-by:
-
Vlad Buslov authored
Fix net reference counting in fl_change() and remove redundant call to tcf_exts_get_net() from __fl_delete(). __fl_put() already tries to get net before releasing exts and deallocating a filter, so this code caused flower classifier to obtain net twice per filter that is being deleted. Implementation of __fl_delete() called tcf_exts_get_net() to pass its result as 'async' flag to fl_mask_put(). However, 'async' flag is redundant and only complicates fl_mask_put() implementation. This functionality seems to be copied from filter cleanup code, where it was added by Cong with following explanation: This patchset tries to fix the race between call_rcu() and cleanup_net() again. Without holding the netns refcnt the tc_action_net_exit() in netns workqueue could be called before filter destroy works in tc filter workqueue. This patchset moves the netns refcnt from tc actions to tcf_exts, without breaking per-netns tc actions. This doesn't apply to flower mask, which doesn't call any tc action code during cleanup. Simplify fl_mask_put() by removing the flag parameter and always use tcf_queue_work() to free mask objects. Fixes: 06177558 ("net: sched: flower: introduce reference counting for filters") Fixes: 1f17f774 ("net: sched: flower: insert filter to ht before offloading it to hw") Fixes: 05cd271f ("cls_flower: Support multiple masks per priority") Reported-by:Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
David Ahern authored
pmtu.sh script runs a number of tests and dumps a summary of pass/fail. If a test fails, it is near impossible to debug why. For example: TEST: ipv6: PMTU exceptions [FAIL] There are a lot of commands run behind the scenes for this test. Which one is failing? Add a VERBOSE option to show commands that are run and any output from those commands. Add a PAUSE_ON_FAIL option to halt the script if a test fails allowing users to poke around with the setup in the failed state. In the process, rename tracing to TRACING and move declaration to top with the new variables. Signed-off-by:David Ahern <dsahern@gmail.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-04-12 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Improve BPF verifier scalability for large programs through two optimizations: i) remove verifier states that are not useful in pruning, ii) stop walking parentage chain once first LIVE_READ is seen. Combined gives approx 20x speedup. Increase limits for accepting large programs under root, and add various stress tests, from Alexei. 2) Implement global data support in BPF. This enables static global variables for .data, .rodata and .bss sections to be properly handled which allows for more natural program development. This also opens up the possibility to optimize program workflow by compiling ELFs only once and later only rewriting section data before reload, from Daniel and with test cases and libbpf refactoring from Joe. 3) Add config option to generate BTF type info for vmlinux as part of the kernel build process. DWARF debug info is converted via pahole to BTF. Latter relies on libbpf and makes use of BTF deduplication algorithm which results in 100x savings compared to DWARF data. Resulting .BTF section is typically about 2MB in size, from Andrii. 4) Add BPF verifier support for stack access with variable offset from helpers and add various test cases along with it, from Andrey. 5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header so that L2 encapsulation can be used for tc tunnels, from Alan. 6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that users can define a subset of allowed __sk_buff fields that get fed into the test program, from Stanislav. 7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up various UBSAN warnings in bpftool, from Yonghong. 8) Generate a pkg-config file for libbpf, from Luca. 9) Dump program's BTF id in bpftool, from Prashant. 10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP program, from Magnus. 11) kallsyms related fixes for the case when symbols are not present in BPF selftests and samples, from Daniel ==================== Signed-off-by:
-
- 11 Apr, 2019 27 commits
-
-
Stanislav Fomichev authored
This should allow us later to extend BPF_PROG_TEST_RUN for non-skb case and be sure that nobody is erroneously setting ctx_{in,out}. Fixes: b0b9395d ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") Reported-by:Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Daniel Borkmann authored
Add the definition for smp_rmb(), smp_wmb(), and smp_mb() to the tools include infrastructure: this patch adds the implementation for x86-64 and arm64, and have it fall back as currently is for other archs which do not have it implemented at this point. The x86-64 one uses lock + add combination for smp_mb() with address below red zone. This is on top of 09d62154 ("tools, perf: add and use optimized ring_buffer_{read_head, write_tail} helpers"), which didn't touch smp_* barrier implementations. Magnus recently rightfully reported however that the latter on x86-64 still wrongly falls back to sfence, lfence and mfence respectively, thus fix that for applications under tools making use of these to avoid such ugly surprises. The main header under tools (include/asm/barrier.h) will in that case not select the fallback implementation. Reported-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
David S. Miller authored
David Ahern says: ==================== ipv6: Refactor nexthop selection helpers during a fib lookup IPv6 has a fib6_nh embedded within each fib6_info and a separate fib6_info for each path in a multipath route. A side effect is that a fib6_info is passed all the way down the stack when selecting a path on a fib lookup. Refactor the fib lookup functions and associated helper functions to take a fib6_nh when appropriate to enable IPv6 to work with nexthop objects where the fib6_nh is not directly part of a fib entry. ==================== Signed-off-by: -
David Ahern authored
Move the nexthop evaluation of a fib entry to a helper that can be leveraged for each fib6_nh in a multipath nexthop object. In the move, 'continue' statements means the helper returns false (loop should continue) and 'break' means return true (found the entry of interest). Signed-off-by:
-
David Ahern authored
Move the device and gateway checks in the fib6_next loop to a helper that can be called per fib6_nh entry. Signed-off-by:
-
David Ahern authored
Move the siblings and fib6_multipath_select after the null entry check since a null entry can not have siblings. Signed-off-by:
-
David Ahern authored
Clean up the fib6_null_entry handling in ip6_pol_route_lookup. rt6_device_match can return fib6_null_entry, but fib6_multipath_select can not. Consolidate the fib6_null_entry handling and on the final null_entry check set rt and goto out - no need to defer to a second check after rt6_find_cached_rt. Signed-off-by:
-
David Ahern authored
find_rr_leaf has 3 loops over fib_entries calling find_match. The loops are very similar with differences in start point and whether the metric is evaluated: 1. start at rr_head, no extra loop compare, check fib metric 2. start at leaf, compare rt against rr_head, check metric 3. start at cont (potential saved point from earlier loops), no extra loop compare, no metric check Create 1 loop that is called 3 different times. This will make a later change with multipath nexthop objects much simpler. Signed-off-by: -
David Ahern authored
find_match primarily needs a fib6_nh (and fib6_flags which it passes through to rt6_score_route). Move fib6_check_expired up to the call sites so find_match is only called for relevant entries. Remove the match argument which is mostly a pass through and use the return boolean to decide if match gets set in the call sites. The end result is a helper that can be called per fib6_nh struct which is needed once fib entries reference nexthop objects that have more than one fib6_nh. Signed-off-by:
-
David Ahern authored
rt6_score_route only needs the fib6_flags and nexthop data. Change it accordingly. Allows re-use later for nexthop based fib6_nh. Signed-off-by:
-
David Ahern authored
rt6_probe sends probes for gateways in a nexthop. As such it really depends on a fib6_nh, not a fib entry. Move last_probe to fib6_nh and update rt6_probe to a fib6_nh struct. Signed-off-by:
-
David Ahern authored
rt6_check_dev is a simpler helper with only 1 caller. Fold the code into rt6_score_route. Signed-off-by:
-
David Ahern authored
Change rt6_check_neigh to take a fib6_nh instead of a fib entry. Move the check on fib_flags and whether the nexthop has a gateway up to the one caller. Remove the inline from the definition as well. Not necessary. Signed-off-by:
-
Colin Ian King authored
The zero namelen check is redundant as it has already been checked for zero at the start of the function. Remove the redundant check. Addresses-Coverity: ("Logically Dead Code") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Daniel Borkmann authored
Alan Maguire says: ==================== Extend bpf_skb_adjust_room growth to mark inner MAC header so that L2 encapsulation can be used for tc tunnels. Patch #1 extends the existing test_tc_tunnel to support UDP encapsulation; later we want to be able to test MPLS over UDP and MPLS over GRE encapsulation. Patch #2 adds the BPF_F_ADJ_ROOM_ENCAP_L2(len) macro, which allows specification of inner mac length. Other approaches were explored prior to taking this approach. Specifically, I tried automatically computing the inner mac length on the basis of the specified flags (so inner maclen for GRE/IPv4 encap is the len_diff specified to bpf_skb_adjust_room minus GRE + IPv4 header length for example). Problem with this is that we don't know for sure what form of GRE/UDP header we have; is it a full GRE header, or is it a FOU UDP header or generic UDP encap header? My fear here was we'd end up with an explosion of flags. The other approach tried was to support inner L2 header marking as a separate room adjustment, i.e. adjust for L3/L4 encap, then call bpf_skb_adjust_room for L2 encap. This can be made to work but because it imposed an order on operations, felt a bit clunky. Patch #3 syncs tools/ bpf.h. Patch #4 extends the tests again to support MPLSoverGRE, MPLSoverUDP, and transparent ethernet bridging (TEB) where the inner L2 header is an ethernet header. Testing of BPF encap against tunnels is done for cases where configuration of such tunnels is possible (MPLSoverGRE[6], MPLSoverUDP, gre[6]tap), and skipped otherwise. Testing of BPF encap/decap is always carried out. Changes since v2: - updated tools/testing/selftest/bpf/config with FOU/MPLS CONFIG variables (patches 1, 4) - reduced noise in patch 1 by avoiding unnecessary movement of code - eliminated inner_mac variable in bpf_skb_net_grow (patch 2) Changes since v1: - fixed formatting of commit references. - BPF_F_ADJ_ROOM_FIXED_GSO flag enabled on all variants (patch 1) - fixed fou6 options for UDP encap; checksum errors observed were due to the fact fou6 tunnel was not set up with correct ipproto options (41 -6). 0 checksums work fine (patch 1) - added definitions for mask and shift used in setting L2 length (patch 2) - allow udp encap with fixed GSO (patch 2) - changed "elen" to "l2_len" to be more descriptive (patch 4) ==================== Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Alan Maguire authored
Update test_tc_tunnel to verify adding inner L2 header encapsulation (an MPLS label or ethernet header) works. Signed-off-by:
Alan Maguire <alan.maguire@oracle.com> Signed-off-by:
-
Alan Maguire authored
Sync include/uapi/linux/bpf.h with tools/ equivalent to add BPF_F_ADJ_ROOM_ENCAP_L2(len) macro. Signed-off-by:
-
Alan Maguire authored
commit 868d5235 ("bpf: add bpf_skb_adjust_room encap flags") introduced support to bpf_skb_adjust_room for GSO-friendly GRE and UDP encapsulation. For GSO to work for skbs, the inner headers (mac and network) need to be marked. For L3 encapsulation using bpf_skb_adjust_room, the mac and network headers are identical. Here we provide a way of specifying the inner mac header length for cases where L2 encap is desired. Such an approach can support encapsulated ethernet headers, MPLS headers etc. For example to convert from a packet of form [eth][ip][tcp] to [eth][ip][udp][inner mac][ip][tcp], something like the following could be done: headroom = sizeof(iph) + sizeof(struct udphdr) + inner_maclen; ret = bpf_skb_adjust_room(skb, headroom, BPF_ADJ_ROOM_MAC, BPF_F_ADJ_ROOM_ENCAP_L4_UDP | BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 | BPF_F_ADJ_ROOM_ENCAP_L2(inner_maclen)); Signed-off-by:
-
Alan Maguire authored
commit 868d5235 ("bpf: add bpf_skb_adjust_room encap flags") introduced support to bpf_skb_adjust_room for GSO-friendly GRE and UDP encapsulation and later introduced associated test_tc_tunnel tests. Here those tests are extended to cover UDP encapsulation also. Signed-off-by:
-
Jon Maloy authored
In the function tipc_node_create() we protect the peer capability field by using the node rw_lock. However, we access the lock directly instead of using the dedicated functions for this, as we do everywhere else in node.c. This cosmetic spot is fixed here. Fixes: 40999f11 ("tipc: make link capability update thread safe") Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Stanislav Fomichev authored
Commit b0b9395d ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") started using bpf_check_uarg_tail_zero in BPF_PROG_TEST_RUN. However, bpf_check_uarg_tail_zero is not defined for !CONFIG_BPF_SYSCALL: net/bpf/test_run.c: In function ‘bpf_ctx_init’: net/bpf/test_run.c:142:9: error: implicit declaration of function ‘bpf_check_uarg_tail_zero’ [-Werror=implicit-function-declaration] err = bpf_check_uarg_tail_zero(data_in, max_size, size); ^~~~~~~~~~~~~~~~~~~~~~~~ Let's not build net/bpf/test_run.c when CONFIG_BPF_SYSCALL is not set. Reported-by:
kbuild test robot <lkp@intel.com> Fixes: b0b9395d ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN") Signed-off-by:
-
Vlad Buslov authored
Implementation of function rhashtable_insert_fast() check if its internal helper function __rhashtable_insert_fast() returns non-NULL pointer and seemingly return -EEXIST in such case. However, since __rhashtable_insert_fast() is called with NULL key pointer, it never actually checks for duplicates, which means that -EEXIST is never returned to the user. Use rhashtable_lookup_insert_fast() hash table API instead. In order to verify that it works as expected and prevent the problem from happening in future, extend tc-tests with new test that verifies that no new filters with existing key can be inserted to flower classifier. Fixes: 1f17f774 ("net: sched: flower: insert filter to ht before offloading it to hw") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Guillaume Nault authored
NETNSA_NSID is signed. Use nla_get_s32() to avoid confusion. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Stanislav Fomichev authored
Simple test that sets cb to {1,2,3,4,5} and priority to 6, runs bpf program that fails if cb is not what we expect and increments cb[i] and priority. When the test finishes, we check that cb is now {2,3,4,5,6} and priority is 7. We also test the sanity checks: * ctx_in is provided, but ctx_size_in is zero (same for ctx_out/ctx_size_out) * unexpected non-zero fields in __sk_buff return EINVAL Signed-off-by:Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Stanislav Fomichev authored
Support recently introduced input/output context for test runs. We extend only bpf_prog_test_run_xattr. bpf_prog_test_run is unextendable and left as is. Signed-off-by:
-
Stanislav Fomichev authored
Add new set of arguments to bpf_attr for BPF_PROG_TEST_RUN: * ctx_in/ctx_size_in - input context * ctx_out/ctx_size_out - output context The intended use case is to pass some meta data to the test runs that operate on skb (this has being brought up on recent LPC). For programs that use bpf_prog_test_run_skb, support __sk_buff input and output. Initially, from input __sk_buff, copy _only_ cb and priority into skb, all other non-zero fields are prohibited (with EINVAL). If the user has set ctx_out/ctx_size_out, copy the potentially modified __sk_buff back to the userspace. We require all fields of input __sk_buff except the ones we explicitly support to be set to zero. The expectation is that in the future we might add support for more fields and we want to fail explicitly if the user runs the program on the kernel where we don't yet support them. The API is intentionally vague (i.e. we don't explicitly add __sk_buff to bpf_attr, but ctx_in) to potentially let other test_run types use this interface in the future (this can be xdp_md for xdp types for example). v4: * don't copy more than allowed in bpf_ctx_init [Martin] v3: * handle case where ctx_in is NULL, but ctx_out is not [Martin] * convert size==0 checks to ptr==NULL checks and add some extra ptr checks [Martin] v2: * Addressed comments from Martin Lau Signed-off-by: -
Prashant Bhole authored
Let's add a way to know whether a program has btf context. Patch adds 'btf_id' in the output of program listing. When btf_id is present, it means program has btf context. Sample output: user@test# bpftool prog list 25: xdp name xdp_prog1 tag 539ec6ce11b52f98 gpl loaded_at 2019-04-10T11:44:20+0900 uid 0 xlated 488B not jited memlock 4096B map_ids 23 btf_id 1 Signed-off-by:
Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Acked-by:
-
