- 17 Jul, 2014 40 commits
-
-
Andrey Utkin authored
The issue was discovered by static analysis. It turns out that code is somewhat insane, being if (x) {...} else { if (x) {...} } Edited it to do the only reasonable thing, which is to log the information about the failed call. The most descriptive logging commands set is taken from original code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79801Reported-by:David Binderman <dcb314@hotmail.com> Signed-off-by:
Andrey Utkin <andrey.krieger.utkin@gmail.com> Acked-by:
Mike Isely <isely@pobox.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Anil Belur authored
- this patch removes IRQF_DISABLED macro, as this is deprecated/noop. Signed-off-by:
Anil Belur <askb23@gmail.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Andrey Utkin authored
Previously, it was needed to reopen device to update GOP size and quantization parameter. Now we update device registers with new values immediately. Signed-off-by:
Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Andrey Utkin authored
solo6*10 boards have configurable quantization parameter which takes values from 0 to 31, inclusively. This change enables setting it with ioctl VIDIOC_S_CTRL with id V4L2_CID_MPEG_VIDEO_H264_MIN_QP. Signed-off-by:
-
Andreas Weber authored
The total number of bits is 16 (12+4). Fix it. Signed-off-by:
Andreas Weber <andy.weber.aw@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_SOLO6X10=y, but CONFIG_BITREVERSE=m: drivers/built-in.o: In function `solo_osd_print': (.text+0x1c7a1f): undefined reference to `byte_rev_table' make: *** [vmlinux] Error 1 Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Hans Verkuil authored
The colorspace for HDTV is REC709, not SMPTE240M. Signed-off-by:
-
Hans Verkuil authored
Add support for Hauppauge model 71100: WinTV-ImpactVCB-e (PCIe, Retail, half height) Signed-off-by:
-
Hans Verkuil authored
Otherwise you cannot get the current clip and bitmap information from an overlay. Signed-off-by:
-
Hans Verkuil authored
If the vidioc_cropcap op is implemented by the driver then the v4l2 core will call that directly. If g_selection is available, then the core cropcap implementation uses g_selection to fill in the bounds and defrect and it sets the pixelaspect to 1x1. But if both are available, then I would like to use g_selection to fill in defrect and bounds before calling cropcap. That way the driver's cropcap implementation doesn't have to set defrect or bounds. Signed-off-by:
-
Hans Verkuil authored
Be sure that the reserved fields are cleared. Signed-off-by:
-
Hans Verkuil authored
The edid field is the last field of the struct, so there is nothing to clear. Signed-off-by:
-
Hans Verkuil authored
Some applications poll a lot, so prevent the poll message from flooding the log. Signed-off-by:
-
Hans Verkuil authored
Add a macro to test if the field consists of a single top or bottom field. Anyone who needs to work with fields as opposed to frame will need this. Signed-off-by:
-
Hans Verkuil authored
The VIDIOC_STREAMON/OFF ioctls are not valid for radio devices, just like the other streaming I/O ioctls. Add the streamon/off ioctls to the other streaming I/O ioctls. Signed-off-by:
-
Hans Verkuil authored
If the driver supports enum_freq_bands, but only for certain device nodes, then it may return -ENOTTY. But in that case the code should fall into the fall-back case where the current tuner/modulator range is returned. Signed-off-by:
-
Hans Verkuil authored
The other format ioctls (g/s/try_fmt) all check if the passed buffer type makes sense for the device node's vfl_type. E.g. it makes no sense for a VBI buffer type to be passed through a video node instead of a vbi node. But this check was missing in ENUM_FMT which can cause a problem if you have both video and sdr device nodes. Signed-off-by:
-
Hans Verkuil authored
The text referred to videodev.h when videodev2.h was meant. Fixed. Signed-off-by:
-
Hans Verkuil authored
The v4l2_event union has a new src_change field, but that was never added to the VIDIOC_DQEVENT documentation of that union. Fixed. Signed-off-by:
-
Hans Verkuil authored
There shouldn't be any spaces after <constant> or before </constant>. This leads to ugly results like: 'image size set by VIDIOC_S_FMT .' Signed-off-by:
-
Laurent Pinchart authored
Update the OMAP Image Signal Processor entry to cover both the OMAP3 ISP and OMAP4 ISS. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
When a fatal error occurs in the pipeline signal it to the vb2 queue with a call to vb2_queue_error(). The queue will then take care to return -EIO when preparing buffers, remove the driver-specific code that now duplicates that check. Signed-off-by:
-
Laurent Pinchart authored
This simplifies remove and error code paths. Signed-off-by:
-
Laurent Pinchart authored
The parameter is used to initialize the video node debug field and activate the V4L debug infrastructure. Signed-off-by:
-
Laurent Pinchart authored
Initialize the spin lock once only when initializing the video object. Signed-off-by:
-
Vitaly Osipov authored
It makes more sense to return PTR_ERR(iss->iss_ctrlclk) here. The current code looks like an oversight in pasting the block just above this one. Signed-off-by:
Vitaly Osipov <vitaly.osipov@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The OMAP4 camera support depends on I2C and VIDEO_V4L2, both of which can be loadable modules. This causes build failures if we want the camera driver to be built-in. This can be solved by turning the option into "tristate", which unfortunately causes another problem, because the driver incorrectly calls a platform-internal interface for omap4_ctrl_pad_readl/omap4_ctrl_pad_writel. Instead, this patch just forbids the invalid configurations and ensures that the driver can only be built if all its dependencies are built-in. Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Laurent Pinchart authored
When a fatal error occurs that render the device unusable, the only options for a driver to signal the error condition to userspace is to set the V4L2_BUF_FLAG_ERROR flag when dequeuing buffers and to return an error from the buffer prepare handler when queuing buffers. The buffer error flag indicates a transient error and can't be used by applications to detect fatal errors. Returning an error from vb2_qbuf() is thus the only real indication that a fatal error occurred. However, this is difficult to handle for multithreaded applications that requeue buffers from a thread other than the control thread. In particular the poll() call in the control thread will not notify userspace of the error. This patch adds an explicit mechanism to report fatal errors to userspace. Drivers can call the vb2_queue_error() function to signal a fatal error. From this moment on, buffer preparation will return -EIO to userspace, and vb2_poll() will set the POLLERR flag and return immediately. The error flag is cleared when cancelling the queue, either at stream off time (through vb2_streamoff) or when releasing the queue with vb2_queue_release(). Signed-off-by:
-
Laurent Pinchart authored
The V4L2 specification states that "When the application did not call VIDIOC_QBUF or VIDIOC_STREAMON yet the poll() function succeeds, but sets the POLLERR flag in the revents field." The vb2_poll() function sets POLLERR when the queued buffers list is empty, regardless of whether this is caused by the stream not being active yet, or by a transient buffer underrun. Bring the implementation in line with the specification by returning POLLERR if no buffer has been queued only when the queue is not streaming. Buffer underruns during streaming are not treated specially anymore and just result in poll() blocking until the next event. Signed-off-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
Laurent Pinchart authored
Pixel color components can be scaled using either bilinear interpolation or a multitap filter. The multitap filter provides better results, but can't be selected when the alpha layer need to be scaled down by more than 1/2. Disable alpha scaling when the input has a fixed alpha value, and program the UDS to output a fixed alpha value in that case. This ensures the multitap filter will be used whenever possible. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Expose the background color to userspace through the V4L2_CID_BG_COLOR control. Signed-off-by:
-
Laurent Pinchart authored
The BRU outputs premultiplied colors, enable color data normalization when the format configured at the output of the pipeline isn't premultiplied. Signed-off-by:
-
Laurent Pinchart authored
Adjust the BRU blending formula to avoid the multiplication by alpha when the corresponding input format is premultiplied. As this requires access to the RPFs connected to the BRU inputs from the BRU module, store pointers to the RPFs in the BRU structure when validating the pipeline. Signed-off-by:
-
Laurent Pinchart authored
The control is used to configure the fixed alpha channel value, when reading from memory in the RPF or writing to memory in the WPF. Signed-off-by:
-
Laurent Pinchart authored
Support ARGB formats on the RPF side by reading the alpha component from memory and on the WPF side by writing it to memory. Signed-off-by:
-
Laurent Pinchart authored
The driver ignores the alpha component on output video nodes and hardcodes the alpha component to 0 on capture video nodes. Make this explicit by exposing XRGB formats. Compatibility with existing userspace applications is handled by selecting the XRGB format corresponding to the requested old RGB format. Signed-off-by:
-
Laurent Pinchart authored
The VSP1 stores the video pipelines' input (RPF) to output (WPF) mappings in a WPF register. An RPF must never be associated with multiple WPFs, even if all of those WPFs but one are unused, otherwise the hardware won't function properly. The driver doesn't ensure this correctly as it never clears the mappings. An RPF used with one WPF and later with a different WPF will lead to malfunction, as it will be associated with two WPFs. Clear the mappings at stream off time to fix this. Reported-by:
Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by:
-
Laurent Pinchart authored
Use the subdev pointer directly to_vsp1_pipeline() macro instead of casting from the subdev to the wpf object and back to the subdev. Signed-off-by:
-
Laurent Pinchart authored
The control value is currently stored in the SRU structure by the control set handler and written to the hardware at stream on time, making control set during streaming ineffective. Fix it by writing to the registers from within the control set handler. Signed-off-by:
-
Laurent Pinchart authored
The default value isn't set and defaults to 0, which isn't in the 1-6 min-max range. Fix it by setting the default value to 1. This shoud have been caught when checking the control handler error field at initialization time, but the check was missing. Add it. Signed-off-by:
-
