- 10 Feb, 2017 40 commits
-
-
Jakub Kicinski authored
Hwinfo is a simple key=value store of information which is read from the flash and populated during chip power on. Add code to look up information in it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Resource table is an array placed in a well defined location in device's memory which describes device resources and contains locks which have to be acquired to use them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Command Push Pull is the name of NFP's network on a chip. PCIe PF can access the interconnect through a number of mappings controlled via Base Access Registers. BARs allow the PF to issue pretty much any command or address any memory on the chip. Add appropriate logic and a handful of helper for simple operations like reading scalars from memories. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Support for the PF driver is about to be added and will share much of the code. When the VF driver was added we planned to maintain the PF driver as a separate module but have decided that for our simple use case just maintaining a single module is more reasonable. Rename the driver to just "nfp" and update the Kconfig. While at it remove latent references to NFP3200. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Add a helper for checking at runtime that a value will fit inside a specified field/mask. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== devlink: small cleanup around eswitch [sg]et Contains small devlink cleanup around eswitch get/set commands. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Even when mode_get op is not present, other eswitch attrs need to be filled-up. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Be aligned with the rest of the code and use label named nla_put_failure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Be aligned with the rest of the file and name the helper function accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
The eswitch_[gs]et command is supposed to be similar to port_[gs]et command - for multiple eswitch attributes. However, when it was introduced by 08f4b591 ("net/devlink: Add E-Switch mode control") it was wrongly named with the word "mode" in it. So fix this now, make the oririnal enum value existing but obsolete. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2017-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more updates: * use shash in mac80211 crypto code where applicable * some documentation fixes * pass RSSI levels up in change notifications * remove unused rfkill-regulator * various other cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Khoronzhuk authored
No need to update jiffies in txq->trans_start twice and only for tx 0, it's supposed to be done in netdev_start_xmit() and per tx queue. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Florian Fainelli says: ==================== net: dsa: remove unnecessary phy.h include Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an unnecessary dependency for quite a large amount of the kernel. There's very little which actually requires definitions from phy.h in net/dsa.h - the include itself only wants the declaration of a couple of structures and IFNAMSIZ. Add linux/if.h for IFNAMSIZ, declarations for the structures, phy.h to mv88e6xxx.h as it needs it for phy_interface_t, and remove both phy.h and phy_fixed.h from net/dsa.h. This patch reduces from around 800 files rebuilt to around 40 - even with ccache, the time difference is noticable. In order to make this change, several drivers need to be updated to include necessary headers that they were picking up through this include. This has resulted in a much larger patch series. I'm assuming the 0-day builder has had 24 hours with this series, and hasn't reported any further issues with it - the last issue was two weeks ago (before I became ill) which I fixed over the last weekend. I'm hoping this doesn't conflict with what's already in net-next... David, this should probably go via your tree considering the diffstat. Changes in v2: - took Russell's patch series - removed Qualcomm EMAC patch - rebased against net-next/master ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Including phy.h and phy_fixed.h into net/dsa.h causes phy*.h to be an unnecessary dependency for quite a large amount of the kernel. There's very little which actually requires definitions from phy.h in net/dsa.h - the include itself only wants the declaration of a couple of structures and IFNAMSIZ. Add linux/if.h for IFNAMSIZ, declarations for the structures, phy.h to mv88e6xxx.h as it needs it for phy_interface_t, and remove both phy.h and phy_fixed.h from net/dsa.h. This patch reduces from around 800 files rebuilt to around 40 - even with ccache, the time difference is noticable. Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Fix these errors reported by the 0-day builder by replacing the linux/export.h include with linux/module.h. In file included from include/linux/platform_device.h:14:0, from drivers/net/wireless/ath/ath5k/ahb.c:20: include/linux/device.h:1463:1: warning: data definition has no type or storage class module_init(__driver##_init); \ ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ include/linux/device.h:1463:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int] module_init(__driver##_init); \ ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration In file included from include/linux/platform_device.h:14:0, from drivers/net/wireless/ath/ath5k/ahb.c:20: include/linux/device.h:1468:1: warning: data definition has no type or storage class module_exit(__driver##_exit); ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ include/linux/device.h:1468:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int] module_exit(__driver##_exit); ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration In file included from include/linux/platform_device.h:14:0, from drivers/net/wireless/ath/ath5k/ahb.c:20: drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_exit' defined but not used [-Wunused-function] module_platform_driver(ath_ahb_driver); ^ include/linux/device.h:1464:20: note: in definition of macro 'module_driver' static void __exit __driver##_exit(void) \ ^~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_init' defined but not used [-Wunused-function] module_platform_driver(ath_ahb_driver); ^ include/linux/device.h:1459:19: note: in definition of macro 'module_driver' static int __init __driver##_init(void) \ ^~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:36: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:37: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: error: type defaults to 'int' in declaration of 'module_init' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: error: type defaults to 'int' in declaration of 'module_exit' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:36: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:37: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:38: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:39: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:40: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:41: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:42: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:43: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:46: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_main.c:48: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:53: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_main.c:54: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:57: error: expected ')' before 'sizeof' drivers/net/ethernet/cavium/liquidio/lio_main.c:58: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: data definitionhas no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:498: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_recv_vf_drv_notice': drivers/net/ethernet/cavium/liquidio/lio_main.c:4393: error: implicit declaration of function 'try_module_get' drivers/net/ethernet/cavium/liquidio/lio_main.c:4400: error: implicit declaration of function 'module_put' drivers/net/ethernet/cavium/liquidio/lio_main.c: At top level: drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: error: type defaults to 'int' in declaration of 'module_init' drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: error: type defaults to 'int' in declaration of 'module_exit' drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: parameter names (without types) in function declaration Add linux/module.h to both these files. drivers/net/ethernet/cavium/liquidio/octeon_console.c:40:31: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/octeon_console.c:42:4: error: expected ')' before string constant Add linux/moduleparam.h to this file. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
octeon-platform.c can not be built as a module for two reasons: (a) the Makefile doesn't allow it: obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o (b) the multiple *_initcall() statements, each of which are translated to a module_init() call when attempting a module build, become aliases to init_module(). Having more than one alias will cause a build error. Hence, rather than adding a linux/module.h include, remove the redundant MODULE_*() from this file. Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/target/iscsi/iscsi_target_login.c:1135:7: error: implicit declaration of function 'try_module_get' [-Werror=implicit-function-declaration] Add linux/module.h to iscsi_target_login.c. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/net/ethernet/marvell/mvneta.c:2694:26: error: storage size of 'status' isn't known drivers/net/ethernet/marvell/mvneta.c:2695:26: error: storage size of 'changed' isn't known drivers/net/ethernet/marvell/mvneta.c:2695:9: error: variable 'changed' has initializer but incomplete type drivers/net/ethernet/marvell/mvneta.c:2709:2: error: implicit declaration of function 'fixed_phy_update_state' [-Werror=implicit-function-declaration] Add linux/phy_fixed.h to mvneta.c Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/net/ethernet/freescale/fman/fman_memac.c:519:21: error: dereferencing pointer to incomplete type 'struct fixed_phy_status' Add linux/phy_fixed.h to fman_memac.c Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/net/ethernet/broadcom/bgmac.c:1015:17: error: dereferencing pointer to incomplete type 'struct mii_bus' drivers/net/ethernet/broadcom/bgmac.c:1185:2: error: implicit declaration of function 'phy_start' [-Werror=implicit-function-declaration] drivers/net/ethernet/broadcom/bgmac.c:1198:2: error: implicit declaration of function 'phy_stop' [-Werror=implicit-function-declaration] drivers/net/ethernet/broadcom/bgmac.c:1239:9: error: implicit declaration of function 'phy_mii_ioctl' [-Werror=implicit-function-declaration] drivers/net/ethernet/broadcom/bgmac.c:1389:28: error: 'phy_ethtool_get_link_ksettings' undeclared here (not in a function) drivers/net/ethernet/broadcom/bgmac.c:1390:28: error: 'phy_ethtool_set_link_ksettings' undeclared here (not in a function) drivers/net/ethernet/broadcom/bgmac.c:1403:13: error: dereferencing pointer to incomplete type 'struct phy_device' drivers/net/ethernet/broadcom/bgmac.c:1417:3: error: implicit declaration of function 'phy_print_status' [-Werror=implicit-function-declaration] drivers/net/ethernet/broadcom/bgmac.c:1424:26: error: storage size of 'fphy_status' isn't known drivers/net/ethernet/broadcom/bgmac.c:1424:9: error: variable 'fphy_status' has initializer but incomplete type drivers/net/ethernet/broadcom/bgmac.c:1425:11: warning: excess elements in struct initializer drivers/net/ethernet/broadcom/bgmac.c:1425:3: error: unknown field 'link' specified in initializer drivers/net/ethernet/broadcom/bgmac.c:1426:12: note: in expansion of macro 'SPEED_1000' drivers/net/ethernet/broadcom/bgmac.c:1426:3: error: unknown field 'speed' specified in initializer drivers/net/ethernet/broadcom/bgmac.c:1427:13: note: in expansion of macro 'DUPLEX_FULL' drivers/net/ethernet/broadcom/bgmac.c:1427:3: error: unknown field 'duplex' specified in initializer drivers/net/ethernet/broadcom/bgmac.c:1432:12: error: implicit declaration of function 'fixed_phy_register' [-Werror=implicit-function-declaration] drivers/net/ethernet/broadcom/bgmac.c:1432:31: error: 'PHY_POLL' undeclared (first use in this function) drivers/net/ethernet/broadcom/bgmac.c:1438:8: error: implicit declaration of function 'phy_connect_direct' [-Werror=implicit-function-declaration] drivers/net/ethernet/broadcom/bgmac.c:1439:6: error: 'PHY_INTERFACE_MODE_MII' undeclared (first use in this function) drivers/net/ethernet/broadcom/bgmac.c:1521:2: error: implicit declaration of function 'phy_disconnect' [-Werror=implicit-function-declaration] drivers/net/ethernet/broadcom/bgmac.c:1541:15: error: expected declaration specifiers or '...' before string constant Add linux/phy.h to bgmac.c Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/net/usb/lan78xx.c:394:33: sparse: expected ; at end of declaration drivers/net/usb/lan78xx.c:394:33: sparse: Expected } at end of struct-union-enum-specifier drivers/net/usb/lan78xx.c:394:33: sparse: got interface drivers/net/usb/lan78xx.c:403:1: sparse: Expected ; at the end of type declaration drivers/net/usb/lan78xx.c:403:1: sparse: got } Add linux/phy.h to lan78xx.c Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
drivers/net/ethernet/cadence/macb.h:862:33: sparse: expected ; at end of declaration drivers/net/ethernet/cadence/macb.h:862:33: sparse: Expected } at end of struct-union-enum-specifier drivers/net/ethernet/cadence/macb.h:862:33: sparse: got phy_interface drivers/net/ethernet/cadence/macb.h:877:1: sparse: Expected ; at the end of type declaration drivers/net/ethernet/cadence/macb.h:877:1: sparse: got } In file included from drivers/net/ethernet/cadence/macb_pci.c:29:0: drivers/net/ethernet/cadence/macb.h:862:2: error: unknown type name 'phy_interface_t' phy_interface_t phy_interface; ^~~~~~~~~~~~~~~ Add linux/phy.h to macb.h Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
net/core/netprio_cgroup.c:303:16: error: expected declaration specifiers or '...' before string constant MODULE_LICENSE("GPL v2"); ^~~~~~~~ Add linux/module.h to fix this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Russell King authored
Removing linux/phy.h from net/dsa.h reveals a build error in the sunrpc code: net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_rdma_bc_put': net/sunrpc/xprtrdma/svc_rdma_backchannel.c:277:2: error: implicit declaration of function 'module_put' [-Werror=implicit-function-declaration] net/sunrpc/xprtrdma/svc_rdma_backchannel.c: In function 'xprt_setup_rdma_bc': net/sunrpc/xprtrdma/svc_rdma_backchannel.c:348:7: error: implicit declaration of function 'try_module_get' [-Werror=implicit-function-declaration] Fix this by adding linux/module.h to svc_rdma_backchannel.c Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.11 Mostly smaller changeds and fixes all over, nothing really major standing out. Major changes: iwlwifi * work on support for new A000 devices continues * fix 802.11w, which was failing to due an IGTK bug ath10k * add debugfs file peer_debug_trigger for debugging firmware ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
HW does not understand ETH_P_ALL. So treat this special case differently and translate to 0/0 key/mask. That will allow HW to match all ethertypes. Fixes: 7aa0f5aa ("mlxsw: spectrum: Implement TC flower offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Tobin C. Harding says: ==================== Whitespace checkpatch fixes This patch set fixes various whitespace checkpatch errors and warnings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
tcharding authored
This patch fixes multiple occurrences of checkpatch WARNING: Missing a blank line after declarations. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
tcharding authored
Fix multiple occurrences of checkpatch warning. WARNING: Block comments use * on subsequent lines. Also make comment blocks more uniform. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
tcharding authored
This patch fixes two trivial whitespace errors. Brace should be on the previous line and trailing statements should be on next line. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
tcharding authored
This patch fixes multiple occurrences of space before tabs warnings. More lines of code were moved than required to keep kernel-doc comments uniform. Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Amir Vadai says: ==================== net/sched: act_pedit: Use offset relative to conventional network headers Some FW/HW parser APIs are such that they need to get the specific header type (e.g IPV4 or IPV6, TCP or UDP) and not only the networking level (e.g network or transport). Enhancing the UAPI to allow for specifying that, would allow the same flows to be set into both SW and HW. This patchset also makes pedit more robust. Currently fields offset is specified by offset relative to the ip header, while using negative offsets for MAC layer fields. This series enables the user to set offset relative to the relevant header. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action \ pedit munge ip ttl add 0xff \ pedit munge tcp dport set 8080 \ pipe action mirred egress redirect dev veth0 Will forward traffic destined to tcp dport 80, while modifying the destination port to 8080, and decreasing the ttl by one. I've uploaded a draft for the userspace [2] to make it easier to review and test the patchset. [1] - http://patchwork.ozlabs.org/patch/700909/ [2] - git: https://bitbucket.org/av42/iproute2.git branch: pedit Patchset was tested and applied on top of upstream commit bd092ad1 ("Merge branch 'remove-__napi_complete_done'") Thanks, Amir Changes since V2: - Instead of reusing unused bits in existing uapi fields, using new netlink attributes for the new information. This way new/old user space and new/old kernel can live together without having misunderstandings. Changes since V1: - No changes - V1 was sent and didn't make it for 4.10. - You asked me [1] why did I use specific header names instead of layers (L2, L3...), and I explained that it is on purpose, this extra information is planned to be used by hardware drivers to offload the action. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
This command could be useful to inc/dec fields. For example, to forward any TCP packet and decrease its TTL: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower ip_proto tcp \ action pedit munge ip ttl add 0xff pipe \ action mirred egress redirect dev veth0 In the example above, adding 0xff to this u8 field is actually decreasing it by one, since the operation is masked. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amir Vadai authored
Introduce skb_mac_offset() that could be used to get mac header offset. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Offload MC flood for unregister MC Nogah says: When multicast is enabled, the Linux bridge floods unregistered multicast packets only to ports connected to a multicast router. Devices capable of offloading the Linux bridge need to be made aware of such ports, for proper flooding behavior. On the other hand, when multicast is disabled, such packets should be flooded to all ports. This patchset aims to fix that, by offloading the multicast state and the list of multicast router ports. The first 3 patches adds switchdev attributes to offload this data. The rest of the patchset add implementation for handling this data in the mlxsw driver. The effects this data has on the MDB (namely, when the multicast is disabled the MDB should be considered as invalid, and when it is enabled, a packet that is flooded by it should also be flooded to the multicast routers ports) is subject of future work. Testing of this patchset included: Sending 3 mc packets streams, LL, register and unregistered, and checking that they reached only to the ports that should have received them. The configs were: mc disabled, mc without mc router ports and mc with fixed router port. It was checked for vlan aware bridge, vlan unaware bridge and vlan unaware bridge with another vlan unaware bridge on the same machine ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
Add a function to update mc_disabled from switchdev attr SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
The function mlxsw_sp_port_orig_get returns the vport from the physical port if needed, based on the original device. This patch addresses the case where the original device is a bridge. If it is vlan unaware bridge, it returns the matching vport. If it is vlan aware bridge, there is no matching vport, and it returns the original port. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nogah Frankel authored
The decision whether to flood a multicast packet to a port dependent on three flags: mc_disabled, mc_router_port, mc_flood. If mc_disabled is on, the port will be flooded according to mc_flood, otherwise, according to mc_router_port. To accomplish that, add those flags into the mlxsw_sp_port struct and update the mc flood table accordingly. Update mc_router_port by switchdev attribute SWITCHDEV_ATTR_ID_PORT_MC_ROUTER_PORT. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-