- 08 Jun, 2020 3 commits
-
-
Flavio Suligoi authored
In the files: - net/mac80211/rx.c - net/wireless/Kconfig the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
Flavio Suligoi <f.suligoi@asem.it> Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.itSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Flavio Suligoi authored
The wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
-
Flavio Suligoi authored
In the files: - regulatory.rst - mac80211-injection.rst the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by:
-
- 05 Jun, 2020 2 commits
-
-
Johannes Berg authored
Dan points out that if ieee80211_chandef_he_6ghz_oper() succeeds, we don't initialize 'ret'. Initialize it to 0 in this case, since everything went fine and nothing has to be disabled. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 57fa5e85 ("mac80211: determine chandef from HE 6 GHz operation") Signed-off-by:
-
Johannes Berg authored
Lockdep reports that we may deadlock because we take the RTNL on the work struct, but flush it under RTNL. Clearly, it's correct. In practice, this can happen when doing rfkill on an active device. Fix this by moving the work struct to the wiphy (registered dev) layer, and iterate over all the wdevs inside there. This then means we need to track which one of them has work to do, so we don't update to the driver for all wdevs all the time. Also fix a locking bug I noticed while working on this - the registrations list is iterated as if it was an RCU list, but it isn't handle that way - and we need to lock now for the update flag anyway, so remove the RCU. Fixes: 6cd536fe ("cfg80211: change internal management frame registration API") Reported-by:
Markus Theil <markus.theil@tu-ilmenau.de> Reported-and-tested-by:
Kenneth R. Crudup <kenny@panix.com> Signed-off-by:
-
- 04 Jun, 2020 18 commits
-
-
Wang Hai authored
If register_netdev(dev) fails, free_netdev(dev) needs to be called, otherwise a memory leak will occur. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roelof Berg authored
Corrected the MAC_CR configuration bits for 1 GBit operation. The data sheet allows MAC_CR(2:1) to be 10 and also 11 for 1 GBit/s speed, but only 10 works correctly. Devices tested: Microchip Lan7431, fixed-phy mode Microchip Lan7430, normal phy mode Fixes: 6f197fb6 ("lan743x: Added fixed link and RGMII support") Signed-off-by:
Roelof Berg <rberg@berg-solutions.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Valentin Longchamp authored
net/sch_generic.h does not need to be included, remove it. Signed-off-by:
Valentin Longchamp <valentin@longchamp.me> Signed-off-by:
-
Heiner Kallweit authored
Th referenced change added an extra hw reset to rtl8169_net_suspend() what makes WoL fail on few chip versions. Therefore skip the extra reset if we're going down and WoL is enabled. In rtl_shutdown() rtl8169_hw_reset() is called by rtl8169_net_suspend() already if needed, therefore avoid issues issue by removing the extra call. The fix was tested on a system with RTL8168g. Meanwhile rtl8169_hw_reset() does more than a hw reset and should be renamed. But that's net-next material. Fixes: 8ac8e8c6 ("r8169: make rtl8169_down central chip quiesce function") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The code is return PTR_ERR(NULL) which is zero or success. We should return -ENOMEM instead. Fixes: 94abdad6 ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Ahmed S. Darwish authored
The u64_stats mechanism uses sequence counters to protect against 64-bit values tearing on 32-bit architectures. Updating u64_stats is thus a sequence counter write side critical section where preemption must be disabled. For mdiobus_stats_acct(), disable preemption upon the u64_stats update. It is called from process context through mdiobus_read() and mdiobus_write(). Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Ahmed S. Darwish <a.darwish@linutronix.de> Reviewed-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
The u64_stats mechanism uses sequence counters to protect against 64-bit values tearing on 32-bit architectures. Updating such statistics is a sequence counter write side critical section. Preemption must be disabled before entering this seqcount write critical section. Failing to do so, the seqcount read side can preempt the write side section and spin for the entire scheduler tick. If that reader belongs to a real-time scheduling class, it can spin forever and the kernel will livelock. Document this statistics update side non-preemptibility requirement. Reword the introductory paragraph to highlight u64_stats raison d'être: 64-bit values tearing protection on 32-bit architectures. Divide documentation on a basis of internal design vs. usage constraints. Reword the u64_stats header file top comment to always mention "Reader" or "Writer" at the start of each bullet point, making it easier to follow which side each point is actually for. Clarify the statement "whole thing is a NOOP on 64bit arches or UP kernels". For 32-bit UP kernels, preemption is always disabled for the statistics read side section. Signed-off-by:
-
Ahmed S. Darwish authored
Commit bf7afb29 ("phy: improve safety of fixed-phy MII register reading") protected the fixed PHY status with a sequence counter. Two years later, commit d2b97793 ("net: phy: fixed-phy: remove fixed_phy_update_state()") removed the sequence counter's write side critical section -- neutralizing its read side retry loop. Remove the unused seqcount. Signed-off-by:
-
Ahmed S. Darwish authored
Sequence counters write paths are critical sections that must never be preempted, and blocking, even for CONFIG_PREEMPTION=n, is not allowed. Commit 5dbe7c17 ("net: fix kernel deadlock with interface rename and netdev name retrieval.") handled a deadlock, observed with CONFIG_PREEMPTION=n, where the devnet_rename seqcount read side was infinitely spinning: it got scheduled after the seqcount write side blocked inside its own critical section. To fix that deadlock, among other issues, the commit added a cond_resched() inside the read side section. While this will get the non-preemptible kernel eventually unstuck, the seqcount reader is fully exhausting its slice just spinning -- until TIF_NEED_RESCHED is set. The fix is also still broken: if the seqcount reader belongs to a real-time scheduling policy, it can spin forever and the kernel will livelock. Disabling preemption over the seqcount write side critical section will not work: inside it are a number of GFP_KERNEL allocations and mutex locking through the drivers/base/ :: device_rename() call chain. >From all the above, replace the seqcount with a rwsem. Fixes: 5dbe7c17 (net: fix kernel deadlock with interface rename and netdev name retrieval.) Fixes: 30e6c9fa (net: devnet_rename_seq should be a seqcount) Fixes: c91f6df2 (sockopt: Change getsockopt() of SO_BINDTODEVICE to return an interface name) Cc: <stable@vger.kernel.org> Reported-by: kbuild test robot <lkp@intel.com> [ v1 missing up_read() on error exit ] Reported-by: Dan Carpenter <dan.carpenter@oracle.com> [ v1 missing up_read() on error exit ] Signed-off-by:
-
Michal Vokáč authored
Commit 7e99e347 ("net: dsa: remove dsa_switch_alloc helper") replaced the dsa_switch_alloc helper by devm_kzalloc in all DSA drivers. Unfortunately it introduced a typo in qca8k.c driver and wrong argument is passed to the devm_kzalloc function. This fix mitigates the following kernel exception: Unexpected gfp: 0x6 (__GFP_HIGHMEM|GFP_DMA32). Fixing up to gfp: 0x101 (GFP_DMA|__GFP_ZERO). Fix your code! CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.5.9-yocto-ua #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events deferred_probe_work_func [<c0014924>] (unwind_backtrace) from [<c00123bc>] (show_stack+0x10/0x14) [<c00123bc>] (show_stack) from [<c04c8fb4>] (dump_stack+0x90/0xa4) [<c04c8fb4>] (dump_stack) from [<c00e1b10>] (new_slab+0x20c/0x214) [<c00e1b10>] (new_slab) from [<c00e1cd0>] (___slab_alloc.constprop.0+0x1b8/0x540) [<c00e1cd0>] (___slab_alloc.constprop.0) from [<c00e2074>] (__slab_alloc.constprop.0+0x1c/0x24) [<c00e2074>] (__slab_alloc.constprop.0) from [<c00e4538>] (__kmalloc_track_caller+0x1b0/0x298) [<c00e4538>] (__kmalloc_track_caller) from [<c02cccac>] (devm_kmalloc+0x24/0x70) [<c02cccac>] (devm_kmalloc) from [<c030d888>] (qca8k_sw_probe+0x94/0x1ac) [<c030d888>] (qca8k_sw_probe) from [<c0304788>] (mdio_probe+0x30/0x54) [<c0304788>] (mdio_probe) from [<c02c93bc>] (really_probe+0x1e0/0x348) [<c02c93bc>] (really_probe) from [<c02c9884>] (driver_probe_device+0x60/0x16c) [<c02c9884>] (driver_probe_device) from [<c02c7fb0>] (bus_for_each_drv+0x70/0x94) [<c02c7fb0>] (bus_for_each_drv) from [<c02c9708>] (__device_attach+0xb4/0x11c) [<c02c9708>] (__device_attach) from [<c02c8148>] (bus_probe_device+0x84/0x8c) [<c02c8148>] (bus_probe_device) from [<c02c8cec>] (deferred_probe_work_func+0x64/0x90) [<c02c8cec>] (deferred_probe_work_func) from [<c0033c14>] (process_one_work+0x1d4/0x41c) [<c0033c14>] (process_one_work) from [<c00340a4>] (worker_thread+0x248/0x528) [<c00340a4>] (worker_thread) from [<c0039148>] (kthread+0x124/0x150) [<c0039148>] (kthread) from [<c00090d8>] (ret_from_fork+0x14/0x3c) Exception stack(0xee1b5fb0 to 0xee1b5ff8) 5fa0: 00000000 00000000 00000000 00000000 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 qca8k 2188000.ethernet-1:0a: Using legacy PHYLIB callbacks. Please migrate to PHYLINK! qca8k 2188000.ethernet-1:0a eth2 (uninitialized): PHY [2188000.ethernet-1:01] driver [Generic PHY] qca8k 2188000.ethernet-1:0a eth1 (uninitialized): PHY [2188000.ethernet-1:02] driver [Generic PHY] Fixes: 7e99e347 ("net: dsa: remove dsa_switch_alloc helper") Signed-off-by:
Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by:
-
Jiri Benc authored
If the geneve interface is in collect_md (external) mode, it can't send any packets submitted directly to its net interface, as such packets won't have metadata attached. This is expected. However, the kernel itself sends some packets to the interface, most notably, IPv6 DAD, IPv6 multicast listener reports, etc. This is not wrong, as tunnel metadata can be specified in routing table (although technically, that has never worked for IPv6, but hopefully will be fixed eventually) and then the interface must correctly participate in IPv6 housekeeping. The problem is that any such attempt increases the tx_error counter. Just bringing up a geneve interface with IPv6 enabled is enough to see a number of tx_errors. That causes confusion among users, prompting them to find a network error where there is none. Change the counter used to tx_dropped. That better conveys the meaning (there's nothing wrong going on, just some packets are getting dropped) and hopefully will make admins panic less. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
David S. Miller authored
Sameeh Jubran says: ==================== Fix xdp in ena driver This patchset includes 2 XDP related bug fixes Difference from v1: * Fixed "Fixes" tag ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Sameeh Jubran authored
This patch fixes two issues with XDP: 1. If the XDP verdict is XDP_ABORTED we break the loop, which results in us handling one buffer per napi cycle instead of the total budget (usually 64). To overcome this simply change the xdp_verdict check to != XDP_PASS. When the verdict is XDP_PASS, the skb is not expected to be NULL. 2. Update the residual budget for XDP_DROP and XDP_ABORTED, since packets are handled in these cases. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
-
Sameeh Jubran authored
When sending very high packet rate, the XDP tx queues can get full and start dropping packets. In this case we don't free the pages which results in ena driver draining the system memory. Fix: Simply free the pages when necessary. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by:
-
Ahmed Abdelsalam authored
The seg6_validate_srh() is used to validate SRH for three cases: case1: SRH of data-plane SRv6 packets to be processed by the Linux kernel. Case2: SRH of the netlink message received from user-space (iproute2) Case3: SRH injected into packets through setsockopt In case1, the SRH can be encoded in the Reduced way (i.e., first SID is carried in DA only and not represented as SID in the SRH) and the seg6_validate_srh() now handles this case correctly. In case2 and case3, the SRH shouldn’t be encoded in the Reduced way otherwise we lose the first segment (i.e., the first hop). The current implementation of the seg6_validate_srh() allow SRH of case2 and case3 to be encoded in the Reduced way. This leads a slab-out-of-bounds problem. This patch verifies SRH of case1, case2 and case3. Allowing case1 to be reduced while preventing SRH of case2 and case3 from being reduced . Reported-by: syzbot+e8c028b62439eac42073@syzkaller.appspotmail.com Reported-by:
YueHaibing <yuehaibing@huawei.com> Fixes: 0cb7498f ("seg6: fix SRH processing to comply with RFC8754") Signed-off-by:
Ahmed Abdelsalam <ahabdels@gmail.com> Signed-off-by:
-
Tuong Lien authored
syzbot found the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] CPU: 1 PID: 7060 Comm: syz-executor394 Not tainted 5.7.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__tipc_sendstream+0xbde/0x11f0 net/tipc/socket.c:1591 Code: 00 00 00 00 48 39 5c 24 28 48 0f 44 d8 e8 fa 3e db f9 48 b8 00 00 00 00 00 fc ff df 48 8d bb c8 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 e2 04 00 00 48 8b 9b c8 00 00 00 48 b8 00 00 00 RSP: 0018:ffffc90003ef7818 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8797fd9d RDX: 0000000000000019 RSI: ffffffff8797fde6 RDI: 00000000000000c8 RBP: ffff888099848040 R08: ffff88809a5f6440 R09: fffffbfff1860b4c R10: ffffffff8c305a5f R11: fffffbfff1860b4b R12: ffff88809984857e R13: 0000000000000000 R14: ffff888086aa4000 R15: 0000000000000000 FS: 00000000009b4880(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000140 CR3: 00000000a7fdf000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tipc_sendstream+0x4c/0x70 net/tipc/socket.c:1533 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:672 ____sys_sendmsg+0x32f/0x810 net/socket.c:2352 ___sys_sendmsg+0x100/0x170 net/socket.c:2406 __sys_sendmmsg+0x195/0x480 net/socket.c:2496 __do_sys_sendmmsg net/socket.c:2525 [inline] __se_sys_sendmmsg net/socket.c:2522 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2522 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x49/0xb3 RIP: 0033:0x440199 ... This bug was bisected to commit 0a3e060f ("tipc: add test for Nagle algorithm effectiveness"). However, it is not the case, the trouble was from the base in the case of zero data length message sending, we would unexpectedly make an empty 'txq' queue after the 'tipc_msg_append()' in Nagle mode. A similar crash can be generated even without the bisected patch but at the link layer when it accesses the empty queue. We solve the issues by building at least one buffer to go with socket's header and an optional data section that may be empty like what we had with the 'tipc_msg_build()'. Note: the previous commit 4c21daae ("tipc: Fix NULL pointer dereference in __tipc_sendstream()") is obsoleted by this one since the 'txq' will be never empty and the check of 'skb != NULL' is unnecessary but it is safe anyway. Reported-by: syzbot+8eac6d030e7807c21d32@syzkaller.appspotmail.com Fixes: c0bceb97 ("tipc: add smart nagle feature") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by:
-
Cong Wang authored
There are two kinds of memory leaks in genl_family_rcv_msg_dumpit(): 1. Before we call ops->start(), whenever an error happens, we forget to free the memory allocated in genl_family_rcv_msg_dumpit(). 2. When ops->start() fails, the 'info' has been already installed on the per socket control block, so we should not free it here. More importantly, nlk->cb_running is still false at this point, so netlink_sock_destruct() cannot free it either. The first kind of memory leaks is easier to resolve, but the second one requires some deeper thoughts. After reviewing how netfilter handles this, the most elegant solution I find is just to use a similar way to allocate the memory, that is, moving memory allocations from caller into ops->start(). With this, we can solve both kinds of memory leaks: for 1), no memory allocation happens before ops->start(); for 2), ops->start() handles its own failures and 'info' is installed to the socket control block only when success. The only ugliness here is we have to pass all local variables on stack via a struct, but this is not hard to understand. Alternatively, we can introduce a ops->free() to solve this too, but it is overkill as only genetlink has this problem so far. Fixes: 1927f41a ("net: genetlink: introduce dump info struct to be available during dumpit op") Reported-by: syzbot+21f04f481f449c8db840@syzkaller.appspotmail.com Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Florian Westphal <fw@strlen.de> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jiri Pirko <jiri@mellanox.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: Shaochun Chen <cscnull@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Rohit Maheshwari authored
cxgb4_uld_in_use() is used only by cxgb4_ktls_det_feature() which is under CONFIG_CHELSIO_TLS_DEVICE macro. Fixes: a3ac249a ("cxgb4/chcr: Enable ktls settings at run time") Signed-off-by:
Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by:
-
- 03 Jun, 2020 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ... -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull comedi uaccess cleanups from Al Viro: "Comedi compat ioctls done saner - killing the single biggest pile of __get_user/__put_user outside of arch/* in the process" * 'uaccess.comedi' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: comedi: get rid of compat_alloc_user_space() mess in COMEDI_CMD{,TEST} compat comedi: do_cmd_ioctl(): lift copyin/copyout into the caller comedi: do_cmdtest_ioctl(): lift copyin/copyout into the caller comedi: lift copy_from_user() into callers of __comedi_get_user_cmd() comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSNLIST compat comedi: get rid of compat_alloc_user_space() mess in COMEDI_INSN compat comedi: get rid of compat_alloc_user_space() mess in COMEDI_RANGEINFO compat comedi: get rid of compat_alloc_user_space() mess in COMEDI_CHANINFO compat comedi: get rid of indirection via translated_ioctl() comedi: move compat ioctl handling to native fops
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull splice updates from Al Viro: "Christoph's assorted splice cleanups" * 'work.splice' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: rename pipe_buf ->steal to ->try_steal fs: make the pipe_buf_operations ->confirm operation optional fs: make the pipe_buf_operations ->steal operation optional trace: remove tracing_pipe_buf_ops pipe: merge anon_pipe_buf*_ops fs: simplify do_splice_from fs: simplify do_splice_to
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm updates from Paolo Bonzini: "ARM: - Move the arch-specific code into arch/arm64/kvm - Start the post-32bit cleanup - Cherry-pick a few non-invasive pre-NV patches x86: - Rework of TLB flushing - Rework of event injection, especially with respect to nested virtualization - Nested AMD event injection facelift, building on the rework of generic code and fixing a lot of corner cases - Nested AMD live migration support - Optimization for TSC deadline MSR writes and IPIs - Various cleanups - Asynchronous page fault cleanups (from tglx, common topic branch with tip tree) - Interrupt-based delivery of asynchronous "page ready" events (host side) - Hyper-V MSRs and hypercalls for guest debugging - VMX preemption timer fixes s390: - Cleanups Generic: - switch vCPU thread wakeup from swait to rcuwait The other architectures, and the guest side of the asynchronous page fault work, will come next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits) KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test KVM: check userspace_addr for all memslots KVM: selftests: update hyperv_cpuid with SynDBG tests x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls x86/kvm/hyper-v: enable hypercalls regardless of hypercall page x86/kvm/hyper-v: Add support for synthetic debugger interface x86/hyper-v: Add synthetic debugger definitions KVM: selftests: VMX preemption timer migration test KVM: nVMX: Fix VMX preemption timer migration x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit KVM: x86/pmu: Support full width counting KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT KVM: x86: acknowledgment mechanism for async pf page ready notifications KVM: x86: interrupt based APF 'page ready' event delivery KVM: introduce kvm_read_guest_offset_cached() KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present() KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously" KVM: VMX: Replace zero-length array with flexible-array ... -
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull hyper-v updates from Wei Liu: - a series from Andrea to support channel reassignment - a series from Vitaly to clean up Vmbus message handling - a series from Michael to clean up and augment hyperv-tlfs.h - patches from Andy to clean up GUID usage in Hyper-V code - a few other misc patches * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (29 commits) Drivers: hv: vmbus: Resolve more races involving init_vp_index() Drivers: hv: vmbus: Resolve race between init_vp_index() and CPU hotplug vmbus: Replace zero-length array with flexible-array Driver: hv: vmbus: drop a no long applicable comment hyper-v: Switch to use UUID types directly hyper-v: Replace open-coded variant of %*phN specifier hyper-v: Supply GUID pointer to printf() like functions hyper-v: Use UUID API for exporting the GUID (part 2) asm-generic/hyperv: Add definitions for Get/SetVpRegister hypercalls x86/hyperv: Split hyperv-tlfs.h into arch dependent and independent files x86/hyperv: Remove HV_PROCESSOR_POWER_STATE #defines KVM: x86: hyperv: Remove duplicate definitions of Reference TSC Page drivers: hv: remove redundant assignment to pointer primary_channel scsi: storvsc: Re-init stor_chns when a channel interrupt is re-assigned Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type Drivers: hv: vmbus: Synchronize init_vp_index() vs. CPU hotplug Drivers: hv: vmbus: Remove the unused HV_LOCALIZED channel affinity logic PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality Drivers: hv: vmbus: Use a spin lock for synchronizing channel scheduling vs. channel removal hv_utils: Always execute the fcopy and vss callbacks in a tasklet ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linuxLinus Torvalds authored
Pull kgdb updates from Daniel Thompson: "By far the biggest change in this cycle are the changes that allow much earlier debug of systems that are hooked up via UART by taking advantage of the earlycon framework to implement the kgdb I/O hooks before handing over to the regular polling I/O drivers once they are available. When discussing Doug's work we also found and fixed an broken raw_smp_processor_id() sequence in in_dbg_master(). Also included are a collection of much smaller fixes and tweaks: a couple of tweaks to ged rid of doc gen or coccicheck warnings, future proof some internal calculations that made implicit power-of-2 assumptions and eliminate some rather weird handling of magic environment variables in kdb" * tag 'kgdb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Remove the misfeature 'KDBFLAGS' kdb: Cleanup math with KDB_CMD_HISTORY_COUNT serial: amba-pl011: Support kgdboc_earlycon serial: 8250_early: Support kgdboc_earlycon serial: qcom_geni_serial: Support kgdboc_earlycon serial: kgdboc: Allow earlycon initialization to be deferred Documentation: kgdboc: Document new kgdboc_earlycon parameter kgdb: Don't call the deinit under spinlock kgdboc: Disable all the early code when kgdboc is a module kgdboc: Add kgdboc_earlycon to support early kgdb using boot consoles kgdboc: Remove useless #ifdef CONFIG_KGDB_SERIAL_CONSOLE in kgdboc kgdb: Prevent infinite recursive entries to the debugger kgdb: Delay "kgdbwait" to dbg_late_init() by default kgdboc: Use a platform device to handle tty drivers showing up late Revert "kgdboc: disable the console lock when in kgdb" kgdb: Disable WARN_CONSOLE_UNLOCKED for all kgdb kgdb: Return true in kgdb_nmi_poll_knock() kgdb: Drop malformed kernel doc comment kgdb: Fix spurious true from in_dbg_master()
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull Xtensa updates from Max Filippov: - fix __user annotations in asm/uaccess.h - fix comments in entry.S * tag 'xtensa-20200603' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: Fix spelling/grammar in comment xtensa: add missing __user annotations to asm/uaccess.h xtensa: fix error paths in __get_user_{check,size} xtensa: fix type conversion in __get_user_size xtensa: add missing __user annotations to __{get,put}_user_check
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parsic updates from Helge Deller: "Enable the sysctl file interface for panic_on_stackoverflow for parisc, a warning fix and a bunch of documentation updates since the parisc website is now at https://parisc.wiki.kernel.org" * 'parisc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: MAINTAINERS: Update references to parisc website parisc: module: Update references to parisc website parisc: hardware: Update references to parisc website parisc: firmware: Update references to parisc website parisc: Kconfig: Update references to parisc website parisc: add sysctl file interface panic_on_stackoverflow parisc: use -fno-strict-aliasing for decompressor parisc: suppress error messages for 'make clean'
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Thomas Bogendoerfer: - added support for MIPSr5 and P5600 cores - converted Loongson PCI driver into a PCI host driver using the generic PCI framework - added emulation of CPUCFG command for Loogonson64 cpus - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA - ioremap cleanup - fix for a race between two threads faulting the same page - various cleanups and fixes * tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits) MIPS: ralink: drop ralink_clk_init for mt7621 MIPS: ralink: bootrom: mark a function as __init to save some memory MIPS: Loongson64: Reorder CPUCFG model match arms MIPS: Expose Loongson CPUCFG availability via HWCAP MIPS: Loongson64: Guard against future cores without CPUCFG MIPS: Fix build warning about "PTR_STR" redefinition MIPS: Loongson64: Remove not used pci.c MIPS: Loongson64: Define PCI_IOBASE MIPS: CPU_LOONGSON2EF need software to maintain cache consistency MIPS: DTS: Fix build errors used with various configs MIPS: Loongson64: select NO_EXCEPT_FILL MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe() MIPS: mm: add page valid judgement in function pte_modify mm/memory.c: Add memory read privilege on page fault handling mm/memory.c: Update local TLB if PTE entry exists MIPS: Do not flush tlb page when updating PTE entry MIPS: ingenic: Default to a generic board MIPS: ingenic: Add support for GCW Zero prototype MIPS: ingenic: DTS: Add memory info of GCW Zero MIPS: Loongson64: Switch to generic PCI driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull ia64 build regression fix from Al Viro: "Fix a braino in ia64 uaccess csum changes" * 'uaccess.csum' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a braino in ia64 uaccess csum changes
-
Al Viro authored
Fixes: cc03f19c (ia64: csum_partial_copy_nocheck(): don't abuse csum_partial_copy_from_user()) Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull thread updates from Christian Brauner: "We have been discussing using pidfds to attach to namespaces for quite a while and the patches have in one form or another already existed for about a year. But I wanted to wait to see how the general api would be received and adopted. This contains the changes to make it possible to use pidfds to attach to the namespaces of a process, i.e. they can be passed as the first argument to the setns() syscall. When only a single namespace type is specified the semantics are equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET) equals setns(pidfd, CLONE_NEWNET). However, when a pidfd is passed, multiple namespace flags can be specified in the second setns() argument and setns() will attach the caller to all the specified namespaces all at once or to none of them. Specifying 0 is not valid together with a pidfd. Here are just two obvious examples: setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET); setns(pidfd, CLONE_NEWUSER); Allowing to also attach subsets of namespaces supports various use-cases where callers setns to a subset of namespaces to retain privilege, perform an action and then re-attach another subset of namespaces. Apart from significantly reducing the number of syscalls needed to attach to all currently supported namespaces (eight "open+setns" sequences vs just a single "setns()"), this also allows atomic setns to a set of namespaces, i.e. either attaching to all namespaces succeeds or we fail without having changed anything. This is centered around a new internal struct nsset which holds all information necessary for a task to switch to a new set of namespaces atomically. Fwiw, with this change a pidfd becomes the only token needed to interact with a container. I'm expecting this to be picked-up by util-linux for nsenter rather soon. Associated with this change is a shiny new test-suite dedicated to setns() (for pidfds and nsfds alike)" * tag 'threads-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: selftests/pidfd: add pidfd setns tests nsproxy: attach to namespaces via pidfds nsproxy: add struct nsset -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler updates from Ingo Molnar: "The changes in this cycle are: - Optimize the task wakeup CPU selection logic, to improve scalability and reduce wakeup latency spikes - PELT enhancements - CFS bandwidth handling fixes - Optimize the wakeup path by remove rq->wake_list and replacing it with ->ttwu_pending - Optimize IPI cross-calls by making flush_smp_call_function_queue() process sync callbacks first. - Misc fixes and enhancements" * tag 'sched-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) irq_work: Define irq_work_single() on !CONFIG_IRQ_WORK too sched/headers: Split out open-coded prototypes into kernel/sched/smp.h sched: Replace rq::wake_list sched: Add rq::ttwu_pending irq_work, smp: Allow irq_work on call_single_queue smp: Optimize send_call_function_single_ipi() smp: Move irq_work_run() out of flush_smp_call_function_queue() smp: Optimize flush_smp_call_function_queue() sched: Fix smp_call_function_single_async() usage for ILB sched/core: Offload wakee task activation if it the wakee is descheduling sched/core: Optimize ttwu() spinning on p->on_cpu sched: Defend cfs and rt bandwidth quota against overflow sched/cpuacct: Fix charge cpuacct.usage_sys sched/fair: Replace zero-length array with flexible-array sched/pelt: Sync util/runnable_sum with PELT window when propagating sched/cpuacct: Use __this_cpu_add() instead of this_cpu_ptr() sched/fair: Optimize enqueue_task_fair() sched: Make scheduler_ipi inline sched: Clean up scheduler_ipi() sched/core: Simplify sched_init() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 timer updates from Thomas Gleixner: "X86 timer specific updates: - Add TPAUSE based delay which allows the CPU to enter an optimized power state while waiting for the delay to pass. The delay is based on TSC cycles. - Add tsc_early_khz command line parameter to workaround the problem that overclocked CPUs can report the wrong frequency via CPUID.16h which causes the refined calibration to fail because the delta to the initial frequency value is too big. With the parameter users can provide an halfways accurate initial value" * tag 'x86-timers-2020-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Add tsc_early_khz command line parameter x86/delay: Introduce TPAUSE delay x86/delay: Refactor delay_mwaitx() for TPAUSE support x86/delay: Preparatory code cleanup -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "The truly boring timer and clocksource updates for 5.8: - Not a single new clocksource or clockevent driver! - Device tree updates for various chips - Fixes and improvements and cleanups all over the place" * tag 'timers-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) dt-bindings: timer: Add renesas,em-sti bindings clocksource/drivers/timer-versatile: Clear OF_POPULATED flag clocksource: mips-gic-timer: Mark GIC timer as unstable if ref clock changes clocksource: mips-gic-timer: Register as sched_clock clocksource: dw_apb_timer_of: Fix missing clockevent timers clocksource: dw_apb_timer: Affiliate of-based timer with any CPU clocksource: dw_apb_timer: Make CPU-affiliation being optional dt-bindings: timer: Move snps,dw-apb-timer DT schema from rtc dt-bindings: rtc: Convert snps,dw-apb-timer to DT schema clocksource/drivers/timer-ti-dm: Do one override clock parent in prepare() clocksource/drivers/timer-ti-dm: Fix spelling mistake "detectt" -> "detect" clocksource/drivers/timer-ti-dm: Fix warning for set but not used clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support clocksource/drivers/timer-ti-32k: Add support for initializing directly drivers/clocksource/arm_arch_timer: Remove duplicate error message clocksource/drivers/arc_timer: Remove duplicate error message clocksource/drivers/rda: drop redundant Kconfig dependency clocksource/drivers/timer-ti-dm: Fix warning for set but not used clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support clocksource/drivers/timer-ti-32k: Add support for initializing directly ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "The generic interrupt departement provides: - Cleanup of the irq_domain API - Overhaul of the interrupt chip simulator - The usual pile of new interrupt chip drivers - Cleanups, improvements and fixes all over the place" * tag 'irq-core-2020-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) irqchip: Fix "Loongson HyperTransport Vector support" driver build on all non-MIPS platforms dt-bindings: interrupt-controller: Add Loongson PCH MSI irqchip: Add Loongson PCH MSI controller dt-bindings: interrupt-controller: Add Loongson PCH PIC irqchip: Add Loongson PCH PIC controller dt-bindings: interrupt-controller: Add Loongson HTVEC irqchip: Add Loongson HyperTransport Vector support genirq: Check irq_data_get_irq_chip() return value before use irqchip/sifive-plic: Improve boot prints for multiple PLIC instances irqchip/sifive-plic: Setup cpuhp once after boot CPU handler is present irqchip/sifive-plic: Set default irq affinity in plic_irqdomain_map() irqchip/gic-v2, v3: Drop extra IRQ_NOAUTOEN setting for (E)PPIs irqdomain: Allow software nodes for IRQ domain creation irqdomain: Get rid of special treatment for ACPI in __irq_domain_add() irqdomain: Make __irq_domain_add() less OF-dependent iio: dummy_evgen: Fix use after free on error in iio_dummy_evgen_create() irqchip/gic-v3-its: Balance initial LPI affinity across CPUs irqchip/gic-v3-its: Track LPI distribution on a per CPU basis genirq/irq_sim: Simplify the API irqdomain: Make irq_domain_reset_irq_data() available to non-hierarchical users ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs updates from Gao Xiang: "The most interesting part is the new mount api conversion, which is actually a old patch already pending for several cycles. And the others are recent trivial cleanups here. Summary: - Convert to use the new mount apis - Some random cleanup patches" * tag 'erofs-for-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: suppress false positive last_block warning erofs: convert to use the new mount fs_context api erofs: code cleanup by removing ifdef macro surrounding
-
