- 07 Aug, 2018 4 commits
-
-
Russell King authored
Register the bridge outside of the component helper as we have drivers that wish to use the tda998x without its encoder. Tested-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk>
-
Russell King authored
Cleanup the code a little from the effects of the previous changes: - Move tda998x_destroy() to be above tda998x_create() - Use 'dev' directly in tda998x_create() where appropriate. Tested-by:
-
Russell King authored
Move the tda998x_priv allocation inside tda998x_create() and simplify the tda998x_create()'s arguments. Pass the same to tda998x_destroy(). Tested-by:
-
Russell King authored
Convert tda998x to a bridge driver with built-in encoder support for compatibility with existing component drivers. Tested-by:
-
- 02 Aug, 2018 3 commits
-
-
Russell King authored
Move the non-DT configuration of the TDA998x into tda998x_create() so that we do all setup in one place. Tested-by:
-
Peter Rosin authored
This fits better with the drm_bridge callbacks for when this driver becomes a drm_bridge. Suggested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Peter Rosin authored
This prepares for being a drm_bridge which will not register the encoder. That makes the connector the better choice. Reviewed-by:
-
- 06 Jul, 2018 2 commits
-
-
git://linux-arm.org/linux-ldDave Airlie authored
"mali-dp driver changes for drm-next, includes the driver implementation for writeback, improvements for power management handling in the driver and a debugfs entry for reporting possible internal errors. Please pull at your earliest convenience. Boris Brezillon is also interested in this pull as he is going to change slightly the parameter for the writeback connector's atomic_commit() and he needs to fix the mali-dp driver in his series." Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180705144408.GH15340@e110455-lin.cambridge.arm.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.19: UAPI Changes: v3d: add fourcc modicfier for fourcc for the Broadcom UIF format (Eric Anholt) Cross-subsystem Changes: console/fbcon: Add support for deferred console takeover (Hans de Goede) Core Changes: dma-fence clean up, improvements and docs (Daniel Vetter) add mask function for crtc, plane, encoder and connector DRM objects(Ville Syrjälä) Driver Changes: pl111: add Nomadik LCDC variant (Linus Walleij) Signed-off-by:
-
- 05 Jul, 2018 14 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
A patchset worked out together with Peter Zijlstra. Ingo is OK with taking it through the DRM tree: This is a small fallout from a work to allow batching WW mutex locks and unlocks. Our Wound-Wait mutexes actually don't use the Wound-Wait algorithm but the Wait-Die algorithm. One could perhaps rename those mutexes tree-wide to "Wait-Die mutexes" or "Deadlock Avoidance mutexes". Another approach suggested here is to implement also the "Wound-Wait" algorithm as a per-WW-class choice, as it has advantages in some cases. See for example http://www.mathcs.emory.edu/~cheung/Courses/554/Syllabus/8-recv+serial/deadlock-compare.html Now Wound-Wait is a preemptive algorithm, and the preemption is implemented using a lazy scheme: If a wounded transaction is about to go to sleep on a contended WW mutex, we return -EDEADLK. That is sufficient for deadlock prevention. Since with WW mutexes we also require the aborted transaction to sleep waiting to lock the WW mutex it was aborted on, this choice also provides a suitable WW mutex to sleep on. If we were to return -EDEADLK on the first WW mutex lock after the transaction was wounded whether the WW mutex was contended or not, the transaction might frequently be restarted without a wait, which is far from optimal. Note also that with the lazy preemption scheme, contrary to Wait-Die there will be no rollbacks on lock contention of locks held by a transaction that has completed its locking sequence. The modeset locks are then changed from Wait-Die to Wound-Wait since the typical locking pattern of those locks very well matches the criterion for a substantial reduction in the number of rollbacks. For reservation objects, the benefit is more unclear at this point and they remain using Wait-Die. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linuxDave Airlie authored
omapdrm changes for 4.19 * Workaround for DRA7 errata i932 * Fix mm_list locking * Cleanups Signed-off-by:
-
Ayan Kumar Halder authored
malidp_pm_suspend_late checks if the runtime status is not suspended and if so, invokes malidp_runtime_pm_suspend which disables the display engine/core interrupts and the clocks. It sets the runtime status as suspended. The difference between suspend() and suspend_late() is as follows:- 1. suspend() makes the device quiescent. In our case, we invoke the DRM helper which disables the CRTC. This would have invoked runtime pm suspend but the system suspend process disables runtime pm. 2. suspend_late() It continues the suspend operations of the drm device which was started by suspend(). In our case, it performs the same functionality as runtime_suspend(). The complimentary functions are resume() and resume_early(). In the case of resume_early(), we invoke malidp_runtime_pm_resume() which enables the clocks and the interrupts. It sets the runtime status as active. If the device was in runtime suspend mode before system suspend was called, pm_runtime_work() will put the device back in runtime suspended mode( after the complete system has been resumed). Signed-off-by:
Ayan Kumar Halder <ayan.halder@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Ayan Kumar Halder authored
One needs to store the value of the OUTPUT_DEPTH that one has parsed from device tree, so that it can be restored on system resume. This value is set in the modeset function as this gets reset when the system suspends. Signed-off-by:
-
Ayan Kumar Halder authored
Display and scaling engine interrupts need to be disabled when the runtime pm invokes malidp_runtime_pm_suspend(). Conversely, they need to be enabled in malidp_runtime_pm_resume(). This patch depends on: https://lkml.org/lkml/2017/5/15/695Reported-by:
Alexandru-Cosmin Gheorghe <Alexandru-Cosmin.Gheorghe@arm.com> Signed-off-by:
-
Ayan Kumar Halder authored
Malidp uses two interrupts ie 1. se_irq - used for memory writeback. and 2. de_irq - used for display output. Extract the hardware initialization part from malidp interrupt registration ie (malidp_de_irq_init()/ malidp_se_irq_init()) into a separate function (ie malidp_de_irq_hw_init()/malidp_se_irq_hw_init()) which will be later invoked from runtime_pm_resume function when it needs to re-enable the interrupts. Signed-off-by:
-
Ayan Kumar Halder authored
Malidp uses two interrupts ie 1. se_irq - used for memory writeback. and 2. de_irq - used for display output. 'struct drm_device' is being replaced with 'struct malidp_hw_device' as the function argument. The reason being the dependency of malidp_de_irq_fini on 'struct drm_device' needs to be removed so as to enable it to call from functions which receives 'struct malidp_hw_device' as argument. Furthermore, there is no way to retrieve 'struct drm_device' from 'struct malidp_hw_device'. Signed-off-by:
-
Alexandru Gheorghe authored
Status register contains a lot of bits for reporting internal errors inside Mali DP. Currently, we just silently ignore all of the errors, that doesn't help when we are investigating different bugs, especially on the FPGA models which have a lot of constraints, so we could easily end up in AXI or underrun errors. Add a new file called debug that contains an aggregate of the errors reported by the Mali DP hardware. E.g: [root@alarm ~]# cat /sys/kernel/debug/dri/1/debug [DE] num_errors : 167 [DE] last_error_status : 0x00000001 [DE] last_error_vblank : 385 [SE] num_errors : 3 [SE] last_error_status : 0x00e23001 [SE] last_error_vblank : 201 Changes since v2: - Add lock to protect the errors stats. - Add possibility to reset the error stats by writing anything to the debug file. Signed-off-by:
-
Liviu Dudau authored
Mali DP500 operates in continuous writeback mode (writes frame content until stopped) and it needs special handling in order to behave like a one-shot writeback engine. The original state machine added for DP500 was a bit fragile, as it did not handle correctly cases where a new atomic commit was in progress when the SE IRQ happens and it would commit some partial updates. Improve the handling by adding a parameter to the set_config_valid() function to clear the config valid bit in hardware before starting a new commit and by introducing a MW_RESTART state in the writeback state machine to cater for the case where a new writeback commit gets submitted while the last one is still being active. Reported-by:
Brian Starkey <brian.starkey@arm.com> Reviewed-by:
-
Brian Starkey authored
Mali-DP has a memory writeback engine which can be used to write the composition result to a memory buffer. Expose this functionality as a DRM writeback connector on supported hardware. Changes since v1: Daniel Vetter: - Don't require a modeset when writeback routing changes - Make writeback connector always disconnected Changes since v2: - Rebase onto new drm_writeback_connector - Add reset callback, allocating subclassed state Daniel Vetter: - Squash out-fence support into this commit Gustavo Padovan: - Don't signal fence directly from driver (and drop malidp_mw_job) Changes since v3: - Modifications to fit with Mali-DP commit tail changes Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
-
Liviu Dudau authored
Annotate the pixel format matrix for DP500 with the memory-write flag for formats that are supported by the SE memwrite engine. Reviewed-by:
-
Liviu Dudau authored
Mali DP500 behaves differently from the rest of the Mali DP IP, in that it does not have a one-shot mode and keeps writing the content of the current frame to the provided memory area until stopped. As a way of emulating the one-shot behaviour, we are going to use the CVAL interrupt that is being raised at the start of each frame, during prefetch phase, to act as End-of-Write signal, but with a twist: we are going to disable the memory write engine right after we're notified that it has been enabled, using the knowledge that the bit controlling the enabling will only be acted upon on the next vblank/prefetch. CVAL interrupt will fire durint the next prefetch phase every time the global CVAL bit gets set, so we need a state byte to track the memory write enabling. We also need to pay attention during the disabling of the memory write engine as that requires the CVAL bit to be set in the control register, but we don't want to do that during an atomic commit, as it will write into the hardware a partial state. Reviewed-by:
-
Brian Starkey authored
Add a layer bit for the SE memory-write, and add it to the pixel format matrix for DP550/DP650. Signed-off-by:
-
Liviu Dudau authored
Mali-DP display processors are able to write the composition result to a memory buffer via the SE. Add entry points in the HAL for enabling/disabling this feature, and implement support for it on DP650 and DP550. DP500 acts differently and so is omitted from this change. Changes since v3: - Fix missing vsync interrupt for DP550 Signed-off-by:
-
- 04 Jul, 2018 3 commits
-
-
Dan Carpenter authored
The > should be >= here so that we don't read beyond the end of the dma->buflist[] array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180704094810.whrgn6jxe7uibnfv@kili.mountain
-
Daniel Vetter authored
- Intro section that links to how this is exposed to userspace. - Lots more hyperlinks. - Minor clarifications and style polish v2: Add misplaced hunk of kerneldoc from a different patch. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Dave Airlie authored
Two requests have come in for a backmerge, and I've got some pull reqs on rc2, so this just makes sense. Signed-off-by:
-
- 03 Jul, 2018 14 commits
-
-
Dan Carpenter authored
If page_offset is == num_pages then we end up reading beyond the end of obj->pages[]. Fixes: af33a919 ("drm/vgem: Enable dmabuf import interfaces") Signed-off-by:
-
Dan Carpenter authored
If vertex->idx == dma->buf_count then we end up reading one element beyond the end of the dma->buflist[] array. Signed-off-by:
-
Daniel Vetter authored
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Daniel Vetter authored
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. v2: Also remove the relase hook, dma_fence_free is the default. Reviewed-by:
-
Daniel Vetter authored
The trivial enable_signaling implementation matches the default code. v2: Fix up commit message to match patch better (Eric). Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
-
Daniel Vetter authored
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. Acked-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
-
Daniel Vetter authored
dma_fence_default_wait is the default now, same for the trivial enable_signaling implementation. Reviewed-by:
-
Daniel Vetter authored
dma_fence_default_wait is the default now. Reviewed-by:
-
Daniel Vetter authored
Almost everyone uses dma_fence_default_wait. v2: Also remove the BUG_ON(!ops->wait) (Chris). Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by:
-
Thomas Hellstrom authored
For modeset locks we don't expect a high number of contending transactions so change algorithm from Wait-Die to Wound-Wait. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Acked-by:
Ingo Molnar <mingo@kernel.org>
-
Thomas Hellstrom authored
The current Wound-Wait mutex algorithm is actually not Wound-Wait but Wait-Die. Implement also Wound-Wait as a per-ww-class choice. Wound-Wait is, contrary to Wait-Die a preemptive algorithm and is known to generate fewer backoffs. Testing reveals that this is true if the number of simultaneous contending transactions is small. As the number of simultaneous contending threads increases, Wait-Wound becomes inferior to Wait-Die in terms of elapsed time. Possibly due to the larger number of held locks of sleeping transactions. Update documentation and callers. Timings using git://people.freedesktop.org/~thomash/ww_mutex_test tag patch-18-06-15 Each thread runs 100000 batches of lock / unlock 800 ww mutexes randomly chosen out of 100000. Four core Intel x86_64: Algorithm #threads Rollbacks time Wound-Wait 4 ~100 ~17s. Wait-Die 4 ~150000 ~19s. Wound-Wait 16 ~360000 ~109s. Wait-Die 16 ~450000 ~82s. Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-doc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Co-authored-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Peter Ziljstra authored
Make the WW mutex code more readable by adding comments, splitting up functions and pointing out that we're actually using the Wait-Die algorithm. Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-doc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Co-authored-by:
-
Russell King authored
In commits: 34a2ab5e ("drm: Add acquire ctx parameter to ->update_plane") 19315294 ("drm: Add acquire ctx parameter to ->plane_disable") a pointer to a drm_modeset_acquire_ctx structure was added as an argument to the method prototypes. The transitional helpers are supposed to be directly plugged in as implementations of these methods, but doing so generates a warning. Add the missing argument. A number of buggy users were added for drm_plane_helper_disable() which need to be fixed up for this change, which we do by passing a NULL ctx argument. Fixes: 19315294 ("drm: Add acquire ctx parameter to ->plane_disable") Signed-off-by:
-
Daniel Vetter authored
Apparently didn't get carefully checked. Fixes: 50525c33 ("drm: content-type property for HDMI connector") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
