- 22 Feb, 2013 40 commits
-
-
Jingoo Han authored
There is no need to return -EIO, because backlight_device_register() already returns correct error values. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Acked-by:
Daniel Jeong <daniel.jeong@ti.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
gamma_table has 3 arrays which each hold MAX_GAMMA_LEVEL pointers to int. The current code sets ->gamma_table_count to 6 on 64bit arches and to 3 on 32 bit arches. It should be 3 on everything. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Axel Lin authored
of_find_node_by_name() returns a node pointer with refcount incremented, use of_node_put() on it when done. of_find_node_by_name() will call of_node_put() against the node pass to from parameter, thus we also need to call of_node_get(from) before calling of_find_node_by_name(). Signed-off-by:
Axel Lin <axel.lin@ingics.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
This is an initial commit of a backlight driver, using step-up DCDC power supplies on AS3711 PMIC. Only one mode has actually been tested, several further modes have been implemented "dry," but disabled to avoid accidental hardware damage. Anyone wishing to use any of those modes will have to modify the driver. Tested on sh73a0-based kzm9g board. Only one mode has been tested and is enabled. That mode copies the sample code from the manufacturer. Deviations from that code proved to be fatal for the hardware... Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by:
-
Andrew Morton authored
Fix up indenting. Also alphasort all entries, which reduces patch collisions. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Maxime Ripard authored
Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Brian Lilly <brian@crystalfontz.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Sachin Kamat authored
devm_regulator_bulk_get is device managed and saves some cleanup and exit code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by:
-
Axel Lin authored
Signed-off-by:
-
Devendra Naga authored
The APIs are returning correctly the err codes, no need to assign -EIO to the ret again. Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Acked-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using lcd_device instead of using dev_get_drvdata with &ld->dev, so we can directly pass a struct lcd_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by:
-
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: -
Jingoo Han authored
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by:
-
Jingoo Han authored
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by:
-
Jingoo Han authored
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by:
-
Jingoo Han authored
Remove unnecessary NULL deference check, because it was already checked in ams369fg06_probe(). Also, unnecessary parentheses are removed in ams369fg06_power_is_on(). Signed-off-by:
-
Jingoo Han authored
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by:
-
Jingoo Han authored
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by:
-
Jingoo Han authored
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by:
-
Jingoo Han authored
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by:
-
Jingoo Han authored
Remove unnecessary NULL deference check, because it was already checked in s6e63m0_probe(). Also, POWER_IS_ON is replaced with s6e63m0_power_is_on(). Signed-off-by:
-
Jingoo Han authored
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by:
-
Jingoo Han authored
Lowercase names of structs should be used, because they are not preprocessor macros. Signed-off-by:
-
Jingoo Han authored
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by:
-
Jingoo Han authored
Redundant return variables are removed to reduce the code. Signed-off-by:
-
