- 10 Aug, 2020 8 commits
-
-
shiwu.zhang authored
Update golden setting to improve performance on HPC and ML apps Signed-off-by:
shiwu.zhang <shiwu.zhang@amd.com> Tested-by:
gang.long <gang.long@amd.com> Reviewed-by:
guchun.chen <guchun.chen@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
The UVD/VCE PG state is managed by UVD and VCE IP. It's error-prone to assume the bootup state in SMU based on the dpm status. Signed-off-by:
Evan Quan <evan.quan@amd.com> Acked-by:
-
Evan Quan authored
Correct the cached smu feature state on pp_features sysfs setting. Signed-off-by:
-
Liu ChengZhe authored
Some registers are not accessible to virtual function setup, so skip their initialization when in VF-SRIOV mode. v2: move SRIOV VF check into specify functions; modify commit description and comment. Signed-off-by:
Liu ChengZhe <ChengZhe.Liu@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
Jay Cornwall authored
s_barrier triggers a debug exception when issued with PRIV=1, DEBUG_EN=1. This causes spurious notifications to rocm-gdb. Clear MODE before issuing s_barrier and restore MODE afterwards in the context restore handler. Signed-off-by:
Jay Cornwall <jay.cornwall@amd.com> Tested-by:
Laurent Morichetti <laurent.morichetti@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Felix Kuehling authored
This reverts commit 0a5baee4. The change introduced a regression on some chips. Reverting until a proper solution can be found. Signed-off-by:
-
Felix Kuehling authored
This reverts commit ea368183. Needed due to conflicts when reverting "drm/amdkfd: Unify gfx9/gfx10 context save area layouts". Signed-off-by:
-
Christophe JAILLET authored
When '*sgt' is allocated, we must allocated 'sizeof(**sgt)' bytes instead of 'sizeof(*sg)'. The sizeof(*sg) is bigger than sizeof(**sgt) so this wastes memory but it won't lead to corruption. Fixes: f44ffd67 ("drm/amdgpu: add support for exporting VRAM using DMA-buf v3") Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 07 Aug, 2020 5 commits
-
-
Sandeep Raghuraman authored
Reproducing bug report here: After hibernating and resuming, DPM is not enabled. This remains the case even if you test hibernate using the steps here: https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html I debugged the problem, and figured out that in the file hardwaremanager.c, in the function, phm_enable_dynamic_state_management(), the check 'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)' returns true for the hibernate case, and false for the suspend case. This means that for the hibernate case, the AMDGPU driver doesn't enable DPM (even though it should) and simply returns from that function. In the suspend case, it goes ahead and enables DPM, even though it doesn't need to. I debugged further, and found out that in the case of suspend, for the CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of hibernate, smum_is_dpm_running(hwmgr) returns true. For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function, which is ultimately used to determine if DPM is currently enabled or not, and this seems to provide the wrong answer. I've changed the ci_is_dpm_running() function to instead use the same method that some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller. I've tested on my R9 390 and it seems to work correctly for both suspend and hibernate use cases, and has been stable so far. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839Signed-off-by:
Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by:
-
Dennis Li authored
Make sure to unlock the mutex when error happen v2: 1. correct syntax error in the commit comments 2. remove change-Id Acked-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Dennis Li <Dennis.Li@amd.com> Signed-off-by:
-
Evan Quan authored
As VCN related dpm table setup needs VCN be in PG ungate state. Same logics applies to JPEG. V2: fix paste typo V3: code cosmetic Signed-off-by:
Matt Coffin <mcoffin13@gmail.com> Reviewed-by:
-
Evan Quan authored
Add lock protections and avoid unnecessary actions if the PG state is already the same as required. Signed-off-by:
-
Likun Gao authored
Swith default gpu reset method for sienna_cichlid to MODE1 reset. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
- 06 Aug, 2020 27 commits
-
-
Nicholas Kazlauskas authored
[Why] This was added in the past to solve the issue of not knowing when to stall for medium and full updates in DM. Since DC is ultimately decides what requires bandwidth changes we wanted to make use of it directly to determine this. The problem is that we can't actually pass any of the stream or surface updates into DC global validation, so we don't actually check if the new configuration is valid - we just validate the old existing config instead and stall for outstanding commits to finish. There's also the problem of grabbing the DRM private object for pageflips which can lead to page faults in the case where commits execute out of order and free a DRM private object state that was still required for commit tail. [How] Now that we reset the plane in DM with the same conditions DC checks we can have planes go through DC validation and we know when we need to check and stall based on whether the stream or planes changed. We mark lock_and_validation_needed whenever we've done this, so just go back to using that instead of dm_determine_update_type_for_commit. Since we'll skip resetting the plane for a pageflip we will no longer grab the DRM private object for pageflips as well, avoiding the page fault issued caused by pageflipping under load with commits executing out of order. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] MEDIUM or FULL updates can require global validation or affect bandwidth. By treating these all simply as surface updates we aren't actually passing this through DC global validation. [How] There's currently no way to pass surface updates through DC global validation, nor do I think it's a good idea to change the interface to accept these. DC global validation itself is currently stateless, and we can move our update type checking to be stateless as well by duplicating DC surface checks in DM based on DRM properties. We wanted to rely on DC automatically determining this since DC knows best, but DM is ultimately what fills in everything into DC plane state so it does need to know as well. There are basically only three paths that we exercise in DM today: 1) Cursor (async update) 2) Pageflip (fast update) 3) Full pipe programming (medium/full updates) Which means that anything that's more than a pageflip really needs to go down path #3. So this change duplicates all the surface update checks based on DRM state instead inside of should_reset_plane(). Next step is dropping dm_determine_update_type_for_commit and we no longer require the old DC state at all for global validation. Optimization can come later so we don't reset DC planes at all for MEDIUM udpates and avoid validation, but we might require some extra checks in DM to achieve this. Signed-off-by:
Hersen Wu <hersenxs.wu@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] So we're not racing with userspace or deadlocking DM. [How] These flags are now stored on dm_plane_state itself and acquried and validated during commit_check, so just use those instead. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] We're racing with userspace as the flags could potentially change from when we acquired and validated them in commit_check. [How] We unfortunately can't drop this function in its entirety from prepare_planes since we don't know the afb->address at commit_check time yet. So instead of querying new tiling_flags and tmz_surface use the ones from the plane_state directly. While we're at it, also update the force_disable_dcc option based on the state from atomic check. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Enabling or disable DCC or switching between tiled and linear formats can require bandwidth updates. They're currently skipping all DC validation by being treated as purely surface updates. [How] Treat tiling_flag changes (which encode DCC state) as a condition for resetting the plane. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] Store these in advance so we can reuse them later in commit_tail without having to reserve the fbo again. These will also be used for checking for tiling changes when deciding to reset the plane or not. [How] This change should mostly be a refactor. Only commit check is affected for now and I'll drop the get_fb_info calls in prepare_planes and commit_tail after. This runs a prepass loop once we think that all planes have been added to the context and replaces the get_fb_info calls with accessing the dm_plane_state instead. Signed-off-by:
-
Likun Gao authored
Update drive if file for sienna_cichlid. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Pierre-Eric Pelloux-Prayer authored
Allows UMD to know if TMZ is supported and enabled. This commit also bumps KMS_DRIVER_MINOR because if we don't UMD can't tell if "ids_flags & AMDGPU_IDS_FLAGS_TMZ == 0" means "tmz is not enabled" or "tmz may be enabled but the kernel doesn't report it". v2: use amdgpu_is_tmz() and reworded commit message. Signed-off-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Reviewed-by:
-
Evan Quan authored
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by:
-
Evan Quan authored
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by:
-
Evan Quan authored
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by:
-
Evan Quan authored
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by:
-
Evan Quan authored
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by:
-
Evan Quan authored
As for the gpu metric export, metrics cache makes no sense. It's up to user to decide how often the metrics should be retrieved. Signed-off-by:
-
Evan Quan authored
Add Vega12 gpu metrics export interface. Signed-off-by:
-
Evan Quan authored
Add Vega20 gpu metrics export interface. Signed-off-by:
-
Evan Quan authored
Enable gpu_metrics support on legacy powerplay routines. Signed-off-by:
-
Evan Quan authored
Add Renoir gpu metrics export interface. V2: use memcpy to make code more compact Signed-off-by:
-
Evan Quan authored
Add Sienna Cichlid gpu metrics export interface. Signed-off-by:
-
Evan Quan authored
Add Navi1x gpu metrics export interface. Signed-off-by:
-
Evan Quan authored
Although it does not bring any problem for now, the coming gpu metrics interface needs to handle them differently based on the asic type. Signed-off-by:
-
Evan Quan authored
Add Arcturus gpu metrics export interface. Signed-off-by:
-
Evan Quan authored
This will be shared around all SMU V11 asics. Signed-off-by:
-
Evan Quan authored
A new interface for UMD to retrieve gpu metrics data. V2: rich the documentation Signed-off-by:
-
Evan Quan authored
Thus we can provide an interface for UMD to retrieve gpu metrics data. V2: better naming and comments V3: two structures created for dGPU and APU separately V4: add driver attached timestamp Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Evan Quan authored
For Arcturus, the softmin/max settings from driver are permitted on the latest(54.26 later) SMU firmware. Thus enabling them in driver. Signed-off-by:
-
