- 19 Mar, 2018 1 commit
-
-
Gustavo A. R. Silva authored
_minor_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _minor_ has been null checked. Fixes: 024ad8df763f ("drm/msm: add a5xx specific debugfs") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
- 20 Feb, 2018 25 commits
-
-
Archit Taneja authored
Newer DSI host controllers (SDM845 in particular) require a new clock called byte_intf_clk. A recent patch tried to add this as an optional clock, but it still set 'ret' to an error number if it didn't find it. This breaks the host's probe for all previous DSI host versions. Instead of setting this up as an optional clock, try to get the clock only for the DSI version that supports it. Fixes: 56558fb ("drm/msm/dsi: Add byte_intf_clk") Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
Move a5xx specific code to load firmware into a buffer object to the generic Adreno code. This will come in useful for future targets. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
The number and type of firmware files required differs for each target. Instead of using a fixed struct member for each possible firmware file use a generic list of files that should be loaded on boot. Use some semi-target specific enums to help each target find the appropriate firmware(s) that it needs to load. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
The power management device on the a5xx cores is known as the GPMU (Graphics Power Management Unit). On a6xx cores the device was expanded and renamed as the GMU (Graphics Management Unit). Rename the 'gpmufw' name struct adreno_info as 'powerfw' to avoid confusion. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
drm_mm_init() takes the start and length of the intended virtual memory address region but the msm code is passing the end of the region instead. That would work out if the region started at 0 but it doesn't so the top of the region sneaks above the 32 bit boundary which won't work because the driver doesn't support 64 bit addresses for the GPU yet. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Jordan Crouse authored
If we fail to allocate gpu->grp_clks reset the number of available clocks to zero to avoid referencing the missing array later. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Steve Kowalik authored
drm_gem_object_{reference,unreference,unreference_unlocked} are deprecated functions, and merely alias to the get/put functions. Switch to the new names. Signed-off-by: Steve Kowalik <steven@wedontsleep.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Fengguang Wu authored
Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Luis de Bethencourt authored
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
SDM845 uses a newer revision (v2.0+) of the 6G DSI controller. This revision has another clock input at the block boundary called the byte interface clock. Specify this new clock in the binding. A 10nm DSI PHY is used along with the controller. Add a compatible string for it and specify its base address/regulator supply needs. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Add the compatible string for 14nm DSI PHY (used in MSM8996/APQ8096). >From 14nm PHY onwards, the "dsi_phy_regulator" reg-name is not required, but "dsi_phy_lane" reg-name is. Update the doc to specify the reg-names each PHY revision needs. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
The PHY regulator supply names vary across different PHY versions. Mention explicitly which PHYs require which supplies. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
"qcom,dsi-host-index" and "qcom,dsi-phy-index" DT props aren't acceptable and have never been used in any DT files. Remove them. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
DSI6G v2.0+ blocks have a new clock input to them called byte_intf_clk. It's rate is to be set as byte_clk / 2. Within the clock controller (CC) subsystem, this clock is a child/descendant of the byte_clk. Set it up as an optional clock in the DSI host driver. Make sure that we enable/set its rate only after we configure byte_clk. This is required for the ancestor clocks in the CC to be configured correctly. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
SDM845 contains 2 DSI6G v2.2.1 host controllers. Add them in dsi_cfg. Cc: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
We try to get the interface clock in dsi_get_config early during DSI's component bind. Try getting both the "iface" and "iface_clk" clock name variants so that we are compatible with both new and legacy DT. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Populate the PHY ops with the downstream driver as reference. There are a couple of TODOs which need to be resolved: - The PHY timings are all hardcoded for now. This needs to be replaced with automatic calculations once we get/understand them. - There are some lane configuration registers which use a new representation between physical and logical lane mappings. For now, we've hardcoced them to follow the default mapping (i.e logical 0 -> phy 0, logical 1 -> phy 1 etc). Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Populate PLL clock ops from downstream. This contains the VCO PLL ops and the registration of standard clk_divider and clk_mux clocks. Unlike 14nm PLL, the postdividers/mux of the slave PLL doesn't need to be set to the same values of the postdivs/mux of the master PLL. Hence, we don't need special postdivider clock ops like we did with the 14nm PLL driver. Like the previous PLL drivers, the implementation is slightly different from downstream. We don't use shadow clocks, but have the ability to reparent the RCGs to a different source. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Add new 10nm DSI PLL/PHY files that will be used on SDM845. Just populate empty pll/phy funcs for now. These will be filled up later. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
This flags cause cmdstream to be executed from the ringbuffer (RB) instead of IB1. Normally not something you'd ever want to do, but it is super useful for firmware debugging. Hidden behind CAP_SYS_RAWIO and a default=n kconfig option which depends on EXPERT (and has a suitably scary warning), to prevent it from being used on accident. Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Add some debugfs to dump out PFP and ME microcontroller state, as well as some of the queues (MEQ and ROQ). Also add a debugfs file to trigger a GPU reset (and reloading the firmware on next submit). Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Lloyd Atkinson authored
Move null checks of pointer arguments to the beginning of the modeset init function since they are referenced immediately instead of after they have already been used. Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Lloyd Atkinson authored
Check DSI instance id argument against the proper boundary size to protect against invalid configuration of the DSI id. Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
Lloyd Atkinson authored
Make msm_dsi_pll_init consistently return an error code instead of NULL when pll initialization fails so that later pll retrieval can check against an error code. Add checks for these failures after retrieval of src_pll to avoid invalid pointer dereferences later in msm_dsi_pll_get_clk_provider. Signed-off-by: Lloyd Atkinson <latkinso@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
-
- 15 Feb, 2018 3 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Add HDCP support to i915 drm driver. * tag 'topic/hdcp-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (26 commits) drm/i915: fix misalignment in HDCP register def drm/i915: Reauthenticate HDCP on failure drm/i915: Detect panel's hdcp capability drm/i915: Optimize HDCP key load drm/i915: Retry HDCP bksv read drm/i915: Connector info in HDCP debug msgs drm/i915: Stop encryption for repeater with no sink drm/i915: Handle failure from 2nd stage HDCP auth drm/i915: Downgrade hdcp logs from INFO to DEBUG_KMS drm/i915: Restore HDCP DRM_INFO when with no downstream drm/i915: Check for downstream topology errors drm/i915: Start repeater auth on READY/CP_IRQ drm/i915: II stage HDCP auth for repeater only drm/i915: Extending HDCP for HSW, BDW and BXT+ drm/i915/dp: Fix compilation of intel_dp_hdcp_check_link drm/i915: Only disable HDCP when it's active drm/i915: Don't allow HDCP on PORT E/F drm/i915: Implement HDCP for DisplayPort drm/i915: Implement HDCP for HDMI drm/i915: Add function to output Aksv over GMBUS ...
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 4.17: UAPI Changes: - drm/vc4: Expose performance counters to userspace (Boris) Cross-subsystem Changes: - MAINTAINERS: Linus to maintain panel-arm-versatile in -misc (Linus) Core Changes: - Only use swiotlb when necessary (Chunming) Driver Changes: - drm/panel: Add support for ARM Versatile panels (Linus) - pl111: Improvements around versatile panel support (Linus) ---------------------------------------- Tagged on 2018-02-06: drm-misc-next for 4.17: UAPI Changes: - Validate mode flags + type (Ville) - Deprecate unused mode flags PIXMUX, BCAST (Ville) - Deprecate unused mode types BUILTIN, CRTC_C, CLOCK_C, DEFAULT (Ville) Cross-subsystem Changes: - MAINTAINERS: s/Daniel/Maarten/ for drm-misc (Daniel) Core Changes: - gem: Export gem functions for drivers to use (Samuel) - bridge: Introduce bridge timings in drm_bridge (Linus) - dma-buf: Allow exclusive fence to be bundled in fence array when calling reservation_object_get_fences_rcu (Christian) - dp: Add training pattern 4 and HBR3 support to dp helpers (Manasi) - fourcc: Add alpha bit to formats to avoid driver format LUTs (Maxime) - mode: Various cleanups + add new device-wide .mode_valid hook (Ville) - atomic: Fix state leak when non-blocking commits fail (Leo) NOTE: IIRC, this was cross-picked to -fixes so it might fall out - crc: Allow polling on the data fd (Maarten) Driver Changes: - bridge/vga-dac: Add THS8134* support (Linus) - tinydrm: Various MIPI DBI improvements/cleanups (Noralf) - bridge/dw-mipi-dsi: Cleanups + use create_packet helper (Brian) - drm/sun4i: Add Display Engine frontend support (Maxime) - drm/sun4i: Add zpos support + increase num planes from 2 to 4 (Maxime) - various: Use drm_mode_get_hv_timing() to fill plane clip rectangle (Ville) - stm: Add 8-bit clut support, add dsi phy v1.31 support, +fixes (Phillipe) Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chunming Zhou <david1.zhou@amd.com> Cc: Samuel Li <Samuel.Li@amd.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Leo (Sunpeng) Li <sunpeng.li@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> * tag 'drm-misc-next-2018-02-13' of git://anongit.freedesktop.org/drm/drm-misc: (115 commits) drm/radeon: only enable swiotlb path when need v2 drm/amdgpu: only enable swiotlb alloc when need v2 drm: add func to get max iomem address v2 drm/vc4: Expose performance counters to userspace drm: Print the pid when debug logging an ioctl error. drm/stm: ltdc: remove non-alpha color formats on layer 2 for older hw drm/stm: ltdc: add non-alpha color formats drm/bridge/synopsys: dsi: Add 1.31 version support drm/bridge/synopsys: dsi: Add read feature drm/pl111: Support multiple endpoints on the CLCD drm/pl111: Support variants with broken VBLANK drm/pl111: Support variants with broken clock divider drm/pl111: Handle the Versatile RGB/BGR565 mode drm/pl111: Properly detect the ARM PL110 variants drm/panel: Add support for ARM Versatile panels drm/panel: Device tree bindings for ARM Versatile panels drm/bridge: Rename argument from crtc to bridge drm/crc: Add support for polling on the data fd. drm/sun4i: Use drm_mode_get_hv_timing() to populate plane clip rectangle drm/rcar-du: Use drm_mode_get_hv_timing() to populate plane clip rectangle ...
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - Userspace whitelist register GEN9_SLICE_COMMON_ECO_CHICKEN1 for GLK (Kenneth) - Non-existent PMU counters are not placed to sysfs (Tvrtko) - Add a note to deprecate I915_SET_COLORKEY_NONE and ignore it (Ville) * Intel DDX never ended using it, and implementation was wonky Core Changes: - Moved away from struct timeval into ktime_t in prep for 2038 (Arnd) * Merged the i915 portion through drm-tip, no core dependencies Driver Changes: - Base support for Icelake and Icelake PCH (Anusha, Rodrigo, Mahesh, Paulo, James, Kelvin) - Add AUX-F port support for Cannonlake (Rodrigo) - New DMC firmware for 1.07 Cannonlake (Anusha) * Go to linux-firmware.git to get it - Reject non-cursor planes nearly (3 px) out of screen on GLK/CNL (Imre) - Y/Yf modifiers restored for SKL+ sprites (Ville) - Compressed framebuffer support for sprites (Ville) - Tune down overly aggressive shrinking (Chris) - Shrink kmem caches when GPU is idle (Chris) - EDID bit-banging fallback for HDMI EDID (Stefan) - Don't boost the GPU when the waited request is already running (Chris) - Avoid GLK/BXT CDCLK frequency locking timeouts (Imre) - Limit DP link rate according to VBT on CNL+ (Jani) - Skip post-reset request emission if the engine is not idle (Chris) - Report any link training error on a fixed eDP panel as errors (Manasi) - DSI panel fixes for Bay Trail (Hans) - Selftest additions and improvements (Chris, Matt) - DMA fence test additions and accompanying fixes (Chris) - Power domain vs. register access fix (Maarten) - Squelch warnings for people with teensy framebuffers (stride < 512) (Maarten) - Increase Render/Media power gating hysteresis for Gen9+ (Chris) - HDMI vswing display workaround for Gen9+ (Ville) - GuC code cleanup and lockdep fixes (Sagar, Michal Wa.) - Continuously run hangcheck for simplicity (Chris) - Execlist debugging improvements (Chris) - GuC debugging improvements (Sujaritha, Michal Wa., Sagar) - Command parser boundary checks (Michal Srb) - Add a workaround for 3DSTATE_SAMPLE_PATTERN on CNL (Rafael) - Fix PMU enabling race condition (Tvrtko) - Usual smaller testing and debugging improvements * tag 'drm-intel-next-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel: (158 commits) drm/i915: Update DRIVER_DATE to 20180207 drm/i915/pmu: Fix PMU enable vs execlists tasklet race drm/i915/cnl: WaPipeControlBefore3DStateSamplePattern drm/i915/cmdparser: Do not check past the cmd length. drm/i915/cmdparser: Check reg_table_count before derefencing. drm/i915: Deprecate I915_SET_COLORKEY_NONE drm/i915: Skip post-reset request emission if the engine is not idle drm/i915/execlists: Move the reset bits to a more natural home drm/i915/selftests: Use a sacrificial context for hang testing drm/i915/selftests: Flush old resets between engines drm/i915/breadcrumbs: Drop request reference for the signaler thread drm/i915: Remove unbannable context spam from reset drm/i915/execlists: Remove the startup spam drm/i915: Show the GPU state when declaring wedged drm/i915: Always update the no_fbc_reason when disabling drm/i915: Add some newlines to intel_engine_dump() headers drm/i915: Report if an unbannable context is involved in a GPU hang drm/i915: Remove spurious DRM_ERROR for cancelled interrupts drm/i915/execlists: Flush GTIIR on clearing CS interrupts during reset drm/i915: reduce indent in pch detection ...
-
- 13 Feb, 2018 3 commits
-
-
Chunming Zhou authored
swiotlb expands our card accessing range, but its path always is slower than ttm pool allocation. So add condition to use it. v2: move a bit later Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-3-david1.zhou@amd.com
-
Chunming Zhou authored
get the max io mapping address of system memory to see if it is over our card accessing range. v2: move checking later Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-2-david1.zhou@amd.com
-
Chunming Zhou authored
it will be used to check if the driver needs swiotlb v2: Don't use inline, instead, move function to drm_memory.c (Michel Daenzer <michel@daenzer.net>) Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-1-david1.zhou@amd.com
-
- 11 Feb, 2018 8 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more poll annotation updates from Al Viro: "This is preparation to solving the problems you've mentioned in the original poll series. After this series, the kernel is ready for running for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done as a for bulk search-and-replace. After that, the kernel is ready to apply the patch to unify {de,}mangle_poll(), and then get rid of kernel-side POLL... uses entirely, and we should be all done with that stuff. Basically, that's what you suggested wrt KPOLL..., except that we can use EPOLL... instead - they already are arch-independent (and equal to what is currently kernel-side POLL...). After the preparations (in this series) switch to returning EPOLL... from ->poll() instances is completely mechanical and kernel-side POLL... can go away. The last step (killing kernel-side POLL... and unifying {de,}mangle_poll() has to be done after the search-and-replace job, since we need userland-side POLL... for unified {de,}mangle_poll(), thus the cherry-pick at the last step. After that we will have: - POLL{IN,OUT,...} *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly)" * 'work.poll2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: annotate ep_scan_ready_list() ep_send_events_proc(): return result via esed->res preparation to switching ->poll() to returning EPOLL... add EPOLLNVAL, annotate EPOLL... and event_poll->event use linux/poll.h instead of asm/poll.h xen: fix poll misannotation smc: missing poll annotations
-
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull xtense fix from Max Filippov: "Build fix for xtensa architecture with KASAN enabled" * tag 'xtensa-20180211' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix build with KASAN
-
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2Linus Torvalds authored
Pull nios2 update from Ley Foon Tan: - clean up old Kconfig options from defconfig - remove leading 0x and 0s from bindings notation in dts files * tag 'nios2-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2: nios2: defconfig: Cleanup from old Kconfig options nios2: dts: Remove leading 0x and 0s from bindings notation
-
Max Filippov authored
The commit 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") removed KASAN_SHADOW_SCALE_SHIFT definition from include/linux/kasan.h and added it to architecture-specific headers, except for xtensa. This broke the xtensa build with KASAN enabled. Define KASAN_SHADOW_SCALE_SHIFT in arch/xtensa/include/asm/kasan.h Reported by: kbuild test robot <fengguang.wu@intel.com> Fixes: 917538e2 ("kasan: clean up KASAN_SHADOW_SCALE_SHIFT usage") Acked-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
-
Krzysztof Kozlowski authored
Remove old, dead Kconfig option INET_LRO. It is gone since commit 7bbf3cae ("ipv4: Remove inet_lro library"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
-