- 22 Dec, 2017 1 commit
-
-
Biju Das authored
Add the missing clock to CA7 CPU1 node. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
- 21 Dec, 2017 10 commits
-
-
Biju Das authored
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by:Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by:
-
Biju Das authored
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is trying SSI3 -> SRC3 SSI4 <- SRC4 Signed-off-by: -
Biju Das authored
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: -
Biju Das authored
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: -
Biju Das authored
Enable sound PIO support on carrier board. Signed-off-by:
-
Biju Das authored
This patch enables SGTL5000 audio codec on the carrier board. Signed-off-by:
-
Biju Das authored
Define the generic r8a7745(RZ/G1E) part of the sound device node. This patch is based on the r8a7794 sound work by Sergei Shtylyov. Signed-off-by:
-
Biju Das authored
Instantiate the audio DMA controller on the r8a7745 device tree. Signed-off-by:
-
Biju Das authored
Describe the external audio clocks required by the sound driver. Boards that provide audio clocks need to override the clock frequencies. Signed-off-by:
-
Geert Uytterhoeven authored
The Timer Pulse Unit has registers that lie outside the declared register block. Enlarge the register block size to fix this. Signed-off-by:
-
- 20 Dec, 2017 19 commits
-
-
Simon Horman authored
The timer and thermal-zones nodes do not have any register properties and thus shouldn't be placed on the bus. This problem is flagged by the compiler as follows: $ make DTC arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property DTC arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb: Warning (simple_bus_reg): Node /soc/thermal-zones missing or empty reg/ranges property arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property Signed-off-by:
-
Simon Horman authored
Sort root sub-nodes alphabetically to allow for easier maintenance of this file. Signed-off-by:
-
Biju Das authored
DMA transfer uses DVC DMA DMApp [MEM] -> [SRC] -> [DVC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [DVC] <- [SRC] <- [SSIU] <- [SSI] Signed-off-by:Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Biju Das authored
DMA transfer to/from SRC DMA DMApp [MEM] -> [SRC] -> [SSIU] -> [SSI] DMA DMApp [MEM] <- [SRC] <- [SSIU] <- [SSI] Current sound driver is supporting SSI/SRC random connection. So, this patch is trying SSI1 -> SRC3 SSI0 <- SRC2 Signed-off-by: -
Biju Das authored
DMA transfer to/from SSIU DMA [MEM] -> [SSIU] -> [SSI] DMA [MEM] <- [SSIU] <- [SSI] Signed-off-by: -
Biju Das authored
DMA transfer to/from SSI DMA [MEM] -> [SSI] DMA [MEM] <- [SSI] Signed-off-by: -
Biju Das authored
Enable sound PIO support on carrier board. Signed-off-by:
-
Biju Das authored
This patch enables SGTL5000 audio codec on the carrier board. Signed-off-by:
-
Simon Horman authored
The timer node does not have any register properties and thus shouldn't be placed on the bus. This problem is flagged by the compiler as follows: $ make dtbs W=1 ... DTC arch/arm/boot/dts/r8a7792-wheat.dtb arch/arm/boot/dts/r8a7792-blanche.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm/boot/dts/r8a7792-wheat.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property Signed-off-by:
-
Simon Horman authored
Sort root sub-nodes alphabetically to allow for easier maintenance of this file. Signed-off-by:
-
Simon Horman authored
The timer node does not have any register properties and thus shouldn't be placed on the bus. This problem is flagged by the compiler as follows: $ make dtbs W=1 ... arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property DTC arch/arm/boot/dts/r8a7745-sk-rzg1e.dtb arch/arm/boot/dts/r8a7745-sk-rzg1e.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property Signed-off-by:
-
Simon Horman authored
Sort root sub-nodes alphabetically to allow for easier maintenance of this file. Signed-off-by:
-
Fabrizio Castro authored
Add CMT[01] support to SoC DT. Signed-off-by:
-
Fabrizio Castro authored
Add CMT[01] support to SoC DT. Signed-off-by:
-
Fabrizio Castro authored
Add TPU support to SoC DT. Signed-off-by:
-
Fabrizio Castro authored
Add the definitions for pwm[0123456] to the SoC .dtsi. Signed-off-by:
-
Biju Das authored
This patch instantiates the thermal sensor module with thermal-zone support. This patch is based on the commit cac68a56 ("ARM: dts: r8a7791: enable to use thermal-zone") by Kuninori Morimoto. Signed-off-by:
-
Fabrizio Castro authored
Add TPU support to SoC DT. Signed-off-by:
-
Fabrizio Castro authored
Add the definitions for pwm[0123456] to the SoC .dtsi. Signed-off-by:
-
- 18 Dec, 2017 6 commits
-
-
Chris Paterson authored
The R-Car M2N hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: 57f9156b ("ARM: dts: r8a7793: enable to use thermal-zone") Signed-off-by:
-
Chris Paterson authored
The R-Car M2W hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: cac68a56 ("ARM: dts: r8a7791: enable to use thermal-zone") Signed-off-by:
-
Chris Paterson authored
The R-Car H2 hardware manual states that Tc = –40°C to +105°C. The thermal sensor has an accuracy of ±5°C and there can be a temperature difference of 1 or 2 degrees between Tjmax and the thermal sensor due to the location of the latter. This means that 95°C is a safer value to use. Fixes: a8b805f3 ("ARM: dts: r8a7790: enable to use thermal-zone") Signed-off-by:
-
Biju Das authored
Define the generic r8a7743(RZ/G1M) part of the sound device node. This patch is based on the r8a7791 sound work by Kuninori Morimoto. Signed-off-by:
-
Biju Das authored
Instantiate the two audio DMA controllers on the r8a7743 device tree. Signed-off-by:
-
Biju Das authored
Describe the external audio clocks required by the sound driver. Boards that provide audio clocks need to override the clock frequencies. Signed-off-by:
-
- 07 Dec, 2017 1 commit
-
-
Fabrizio Castro authored
Add DT node for the Advanced Power Management Unit (APMU), add the second CPU core, and use "renesas,apmu" as "enable-method". Signed-off-by:
-
- 04 Dec, 2017 3 commits
-
-
Geert Uytterhoeven authored
Commits 7d29f509 ("dt-bindings: i2c: i2c-gpio: Add support for named gpios") and 05c74778 ("i2c: gpio: Add support for named gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the more error-prone unnamed variant. Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly assumed before. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Geert Uytterhoeven authored
Commits 7d29f509 ("dt-bindings: i2c: i2c-gpio: Add support for named gpios") and 05c74778 ("i2c: gpio: Add support for named gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the more error-prone unnamed variant. Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly assumed before. Signed-off-by:
-
Geert Uytterhoeven authored
Commits 7d29f509 ("dt-bindings: i2c: i2c-gpio: Add support for named gpios") and 05c74778 ("i2c: gpio: Add support for named gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the more error-prone unnamed variant. Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O flags, which were implicitly assumed before. Signed-off-by:
-
