- 11 Dec, 2014 31 commits
-
-
Johannes Weiner authored
All memory accounting and limiting has been switched over to the lockless page counters. Bye, res_counter! [akpm@linux-foundation.org: update Documentation/cgroups/memory.txt] [mhocko@suse.cz: ditch the last remainings of res_counter] Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Vladimir Davydov <vdavydov@parallels.com> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
Abandon the spinlock-protected byte counters in favor of the unlocked page counters in the hugetlb controller as well. Signed-off-by:
-
Johannes Weiner authored
Memory is internally accounted in bytes, using spinlock-protected 64-bit counters, even though the smallest accounting delta is a page. The counter interface is also convoluted and does too many things. Introduce a new lockless word-sized page counter API, then change all memory accounting over to it. The translation from and to bytes then only happens when interfacing with userspace. The removed locking overhead is noticable when scaling beyond the per-cpu charge caches - on a 4-socket machine with 144-threads, the following test shows the performance differences of 288 memcgs concurrently running a page fault benchmark: vanilla: 18631648.500498 task-clock (msec) # 140.643 CPUs utilized ( +- 0.33% ) 1,380,638 context-switches # 0.074 K/sec ( +- 0.75% ) 24,390 cpu-migrations # 0.001 K/sec ( +- 8.44% ) 1,843,305,768 page-faults # 0.099 M/sec ( +- 0.00% ) 50,134,994,088,218 cycles # 2.691 GHz ( +- 0.33% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 8,049,712,224,651 instructions # 0.16 insns per cycle ( +- 0.04% ) 1,586,970,584,979 branches # 85.176 M/sec ( +- 0.05% ) 1,724,989,949 branch-misses # 0.11% of all branches ( +- 0.48% ) 132.474343877 seconds time elapsed ( +- 0.21% ) lockless: 12195979.037525 task-clock (msec) # 133.480 CPUs utilized ( +- 0.18% ) 832,850 context-switches # 0.068 K/sec ( +- 0.54% ) 15,624 cpu-migrations # 0.001 K/sec ( +- 10.17% ) 1,843,304,774 page-faults # 0.151 M/sec ( +- 0.00% ) 32,811,216,801,141 cycles # 2.690 GHz ( +- 0.18% ) <not supported> stalled-cycles-frontend <not supported> stalled-cycles-backend 9,999,265,091,727 instructions # 0.30 insns per cycle ( +- 0.10% ) 2,076,759,325,203 branches # 170.282 M/sec ( +- 0.12% ) 1,656,917,214 branch-misses # 0.08% of all branches ( +- 0.55% ) 91.369330729 seconds time elapsed ( +- 0.45% ) On top of improved scalability, this also gets rid of the icky long long types in the very heart of memcg, which is great for 32 bit and also makes the code a lot more readable. Notable differences between the old and new API: - res_counter_charge() and res_counter_charge_nofail() become page_counter_try_charge() and page_counter_charge() resp. to match the more common kernel naming scheme of try_do()/do() - res_counter_uncharge_until() is only ever used to cancel a local counter and never to uncharge bigger segments of a hierarchy, so it's replaced by the simpler page_counter_cancel() - res_counter_set_limit() is replaced by page_counter_limit(), which expects its callers to serialize against themselves - res_counter_memparse_write_strategy() is replaced by page_counter_limit(), which rounds down to the nearest page size - rather than up. This is more reasonable for explicitely requested hard upper limits. - to keep charging light-weight, page_counter_try_charge() charges speculatively, only to roll back if the result exceeds the limit. Because of this, a failing bigger charge can temporarily lock out smaller charges that would otherwise succeed. The error is bounded to the difference between the smallest and the biggest possible charge size, so for memcg, this means that a failing THP charge can send base page charges into reclaim upto 2MB (4MB) before the limit would have been reached. This should be acceptable. [akpm@linux-foundation.org: add includes for WARN_ON_ONCE and memparse] [akpm@linux-foundation.org: add includes for WARN_ON_ONCE, memparse, strncmp, and PAGE_SIZE] Signed-off-by: -
Pranith Kumar authored
Recently lockless_dereference() was added which can be used in place of hard-coding smp_read_barrier_depends(). The following PATCH makes the change. Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Andrew Morton authored
The code goes BUG, but doesn't tell us which bits were unexpectedly set. Print that out. Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Andrey Ryabinin authored
Adding __printf(3, 4) to slab_err exposed following: mm/slub.c: In function `check_slab': mm/slub.c:852:4: warning: format `%u' expects argument of type `unsigned int', but argument 4 has type `const char *' [-Wformat=] s->name, page->objects, maxobj); ^ mm/slub.c:852:4: warning: too many arguments for format [-Wformat-extra-args] mm/slub.c:857:4: warning: format `%u' expects argument of type `unsigned int', but argument 4 has type `const char *' [-Wformat=] s->name, page->inuse, page->objects); ^ mm/slub.c:857:4: warning: too many arguments for format [-Wformat-extra-args] mm/slub.c: In function `on_freelist': mm/slub.c:905:4: warning: format `%d' expects argument of type `int', but argument 5 has type `long unsigned int' [-Wformat=] "should be %d", page->objects, max_objects); Fix first two warnings by removing redundant s->name. Fix the last by changing type of max_object from unsigned long to int. Signed-off-by:Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Joonsoo Kim authored
Unlike SLUB, sometimes, object isn't started at the beginning of the slab in the SLAB. This causes the unalignment problem when after slab merging is supported by commit 12220dea ("mm/slab: support slab merge"). Alignment mismatch check is introduced ("mm/slab: fix unalignment problem on Malta with EVA due to slab merge") to prevent merge in this case. This causes undesirable result that merging happens between infrequently used kmem_caches if there are kmem_caches with same size and is 256 bytes, are merged into pool_workqueue rather than kmalloc-256, because kmem_caches for kmalloc are at the tail of the list. To prevent this situation, this patch reverses iteration order in find_mergeable() to find frequently used kmem_caches. This change helps to merge kmem_cache to frequently used kmem_caches, such as kmalloc kmem_caches. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Vladimir Davydov authored
Currently we print the slabinfo header in the seq start method, which makes it unusable for showing leaks, so we have leaks_show, which does practically the same as s_show except it doesn't show the header. However, we can print the header in the seq show method - we only need to check if the current element is the first on the list. This will allow us to use the same set of seq iterators for both leaks and slabinfo reporting, which is nice. Signed-off-by:
-
LQYMGT authored
Some code in mm/slab.c and mm/slub.c use whitespaces in indent. Clean them up. Signed-off-by:
LQYMGT <lqymgt@gmail.com> Acked-by:
-
Jan Kara authored
At one place we assign major number we found to ret. That assignment is then never used and actually doesn't make any sense given how the code is currently structured (the assignment comes from pre-git times). Just remove it. Coverity id: 1226852. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dan Carpenter authored
In commit 1faf2894 ("ocfs2_dlm: disallow a domain join if node maps mismatch") we introduced a new earlier NULL check so this one is not needed. Also static checkers complain because we dereference it first and then check for NULL. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Dan Carpenter authored
"inode" isn't NULL here, and also we dereference it on the previous line so static checkers get annoyed. Signed-off-by:
-
jiangyiwen authored
Do not set the filesystem readonly if the storage link is down. In this case, metadata is not corrupted and only -EIO is returned. And if it is indeed corrupted metadata, it has already called ocfs2_error() in ocfs2_validate_inode_block(). Signed-off-by:
Yiwen Jiang <jiangyiwen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Xue jiufei authored
ocfs2_readpages() use nonblocking flag to avoid page lock inversion. It will trigger cluster hang because that flag OCFS2_LOCK_UPCONVERT_FINISHING is not cleared if nonblocking lock cannot be granted at once. The flag would prevent dc thread from downconverting. So other nodes cannot acheive this lockres for ever. So we should not set OCFS2_LOCK_UPCONVERT_FINISHING when receiving ast if nonblocking lock had already returned. Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Reviewed-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Jan Kara authored
Error handling if creation of root of debugfs in ocfs2_init() fails is broken. Although error code is set we fail to exit ocfs2_init() with error and thus initialization ends with success. Later when mounting a filesystem, ocfs2 debugfs entries end up being created in the root of debugfs filesystem which is confusing. Fix the error handling to bail out. Coverity id: 1227009. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Goldwyn Rodrigues authored
Filesize is not a good indication that the file needs to be synced. An example where this breaks is: 1. Open the file in O_SYNC|O_RDWR 2. Read a small portion of the file (say 64 bytes) 3. Lseek to starting of the file 4. Write 64 bytes If the node crashes, it is not written out to disk because this was not committed in the journal and the other node which reads the file after recovery reads stale data (even if the write on the other node was successful) Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.de> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Junxiao Bi authored
Set nn_persistent_error to -ENOTCONN will stop reconnect since the "stop" condition in o2net_start_connect() will be true. stop = (nn->nn_sc || (nn->nn_persistent_error && (nn->nn_persistent_error != -ENOTCONN || timeout == 0))); This will make connection never be established if the first connection request is lost. Set nn_persistent_error to 0 when connect expired to fix this. With this changes, dlm will not be waken up when connect expired, this is OK since dlm depends on network, dlm can do nothing in this case if waken up. Let it wait there for network recover and connect built again to continue. Signed-off-by:Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Srinivas Eeda authored
Node A sends master query request to node B which is the master. At this time lockres happens to be on purgelist. dlm_master_request_handler gets the dlm spinlock, finds the resource and releases the dlm spin lock. Right at this dlm_thread on this node could purge the lockres. dlm_master_request_handler can then acquire lockres spinlock and reply to Node A that node B is the master even though lockres on node B is purged. The above scenario will now make node A falsely think node B is the master which is inconsistent. Further if another node C tries to master the same resource, every node will respond they are not the master. Node C then masters the resource and sends assert master to all nodes. This will now make node A crash with the following message. dlm_assert_master_handler:1831 ERROR: DIE! Mastery assert from 9, but current owner is 10! Signed-off-by:
Wengang Wang <wen.gang.wang@oracle.com> Tested-by:
-
Jan Kara authored
Report return value of o2hb_do_disk_heartbeat() as a part of ML_HEARTBEAT message so that we know whether a heartbeat actually happened or not. This also makes assigned but otherwise unused 'ret' variable used. Coverity id: 1227053. Signed-off-by:
-
Jan Kara authored
'args' are always set for ocfs2_read_locked_inode() and brelse() checks whether bh is NULL. So the test (args && bh) is unnecessary (plus the args part is really confusing anyway). Remove it. Coverity id: 1128856. Signed-off-by:
-
Jan Kara authored
ocfs2_get_xattr_nolock() checks whether inode has any extended attributes (OCFS2_HAS_XATTR_FL). If not, it just sets 'ret' to -ENODATA but continues with checking inline and external attributes anyway (which is pointless although it does not harm). Just return immediately when we know there are no extended attributes in the inode. Coverity id: 1226906. Signed-off-by:
-
Dan Carpenter authored
The ->si_slots[] array is allocated in ocfs2_init_slot_info() it has "->max_slots" number of elements so this test should be >= instead of >. Static checker work. Compile tested only. Signed-off-by:
-
Joseph Qi authored
Do not BUG() if GFP_ATOMIC allocation fails in dlm_dispatch_assert_master. Instead, return -ENOMEM to the sender and then retry. Signed-off-by:
Alex Chen <alex.chen@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Dan Carpenter authored
This off by one bug is harmless but it upsets the static checkers and the code is obvious so it doesn't hurt to fix it. The Smatch warning is: arch/sh/mm/numa.c:47 setup_bootmem_node() error: buffer overflow 'node_data' 1024 <= 1024 Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Johannes Berg authored
The change from \d+ to .+ inside __aligned() means that the following structure: struct test { u8 a __aligned(2); u8 b __aligned(2); }; essentially gets modified to struct test { u8 a; }; for purposes of kernel-doc, thus dropping a struct member, which in turns causes warnings and invalid kernel-doc generation. Fix this by replacing the catch-all (".") with anything that's not a semicolon ("[^;]"). Fixes: 9dc30918 ("scripts/kernel-doc: handle struct member __aligned without numbers") Signed-off-by:Johannes Berg <johannes.berg@intel.com> Cc: Nishanth Menon <nm@ti.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Florian Fainelli authored
dma_debug_init() is called by architecture specific code at different levels, but typically as a fs_initcall due to the debugfs initialization. Some platforms may have early callers of the DMA-API, running prior to the fs_initcall() level, which is not much of an issue unless CONFIG_DMA_API_DEBUG is set. When the DMA-API debugging facilities are turned on a caller will go through: debug_dma_map_{single,page} -> dma_mapping_error (inline function usually) -> debug_dma_mapping_error -> get_hash_bucket Calling get_hash_bucket() returns a valid hash value since we hash on high bits of the dma_addr cookie, but we will grab an unitialized spinlock, which typically won't crash but produce a warning, the real crash will however happen during the bucket list traversal because the list has not been initialized yet. An obvious solution is of course to move some of the offenders to run after the fs_initcall level, but since this might not always be an option, we add a flag "dma_debug_initialized" which is set to false by default, and set to true once dma_debug_init() has had a chance to run. The dma_debug_disabled() helper function previously introduced just needs to check for dma_debug_initialized to allow the caller to proceed or not. Signed-off-by:Florian Fainelli <f.fainelli@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Florian Fainelli authored
Add a helper function which returns whether the DMA debugging API is disabled, right now we only check for global_disable, but in order to accommodate early callers of the DMA-API, we will check for more initialization flags in the next patch. Signed-off-by:
-
Fabian Frederick authored
kcalloc manages count*sizeof overflow. Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Steve French <sfrench@samba.org> Signed-off-by:
-
Fabian Frederick authored
kcalloc manages count*sizeof overflow. Signed-off-by:
-
Fabian Frederick authored
Replace all __constant_foo to foo() except in smb2status.h (1700 lines to update). Signed-off-by:
-
Joonsoo Kim authored
high_memory isn't direct mapped memory so retrieving it's physical address isn't appropriate. But, it would be useful to check physical address of highmem boundary so it's justfiable to get physical address from it. In x86, there is a validation check if CONFIG_DEBUG_VIRTUAL and it triggers following boot failure reported by Ingo. ... BUG: Int 6: CR2 00f06f53 ... Call Trace: dump_stack+0x41/0x52 early_idt_handler+0x6b/0x6b cma_declare_contiguous+0x33/0x212 dma_contiguous_reserve_area+0x31/0x4e dma_contiguous_reserve+0x11d/0x125 setup_arch+0x7b5/0xb63 start_kernel+0xb8/0x3e6 i386_start_kernel+0x79/0x7d To fix boot regression, this patch implements workaround to avoid validation check in x86 when retrieving physical address of high_memory. __pa_nodebug() used by this patch is implemented only in x86 so there is no choice but to use dirty #ifdef. [akpm@linux-foundation.org: tweak comment] Signed-off-by:Ingo Molnar <mingo@kernel.org> Tested-by:
-
- 10 Dec, 2014 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull more 2038 timer work from Thomas Gleixner: "Two more patches for the ongoing 2038 work: - New accessors to clock MONOTONIC and REALTIME seconds This is a seperate branch as Arnd has follow up work depending on this" * 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Provide y2038 safe accessor to the seconds portion of CLOCK_REALTIME timekeeping: Provide fast accessor to the seconds part of CLOCK_MONOTONIC
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 MPX support from Thomas Gleixner: "This enables support for x86 MPX. MPX is a new debug feature for bound checking in user space. It requires kernel support to handle the bound tables and decode the bound violating instruction in the trap handler" * 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: asm-generic: Remove asm-generic arch_bprm_mm_init() mm: Make arch_unmap()/bprm_mm_init() available to all architectures x86: Cleanly separate use of asm-generic/mm_hooks.h x86 mpx: Change return type of get_reg_offset() fs: Do not include mpx.h in exec.c x86, mpx: Add documentation on Intel MPX x86, mpx: Cleanup unused bound tables x86, mpx: On-demand kernel allocation of bounds tables x86, mpx: Decode MPX instruction to get bound violation information x86, mpx: Add MPX-specific mmap interface x86, mpx: Introduce VM_MPX to indicate that a VMA is MPX specific x86, mpx: Add MPX to disabled features ia64: Sync struct siginfo with general version mips: Sync struct siginfo with general version mpx: Extend siginfo structure to include bound violation information x86, mpx: Rename cfg_reg_u and status_reg x86: mpx: Give bndX registers actual names x86: Remove arbitrary instruction size limit in instruction decoder
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq domain updates from Thomas Gleixner: "The real interesting irq updates: - Support for hierarchical irq domains: For complex interrupt routing scenarios where more than one interrupt related chip is involved we had no proper representation in the generic interrupt infrastructure so far. That made people implement rather ugly constructs in their nested irq chip implementations. The main offenders are x86 and arm/gic. To distangle that mess we have now hierarchical irqdomains which seperate the various interrupt chips and connect them via the hierarchical domains. That keeps the domain specific details internal to the particular hierarchy level and removes the criss/cross referencing of chip internals. The resulting hierarchy for a complex x86 system will look like this: vector mapped: 74 msi-0 mapped: 2 dmar-ir-1 mapped: 69 ioapic-1 mapped: 4 ioapic-0 mapped: 20 pci-msi-2 mapped: 45 dmar-ir-0 mapped: 3 ioapic-2 mapped: 1 pci-msi-1 mapped: 2 htirq mapped: 0 Neither ioapic nor pci-msi know about the dmar interrupt remapping between themself and the vector domain. If interrupt remapping is disabled ioapic and pci-msi become direct childs of the vector domain. In hindsight we should have done that years ago, but in hindsight we always know better :) - Support for generic MSI interrupt domain handling We have more and more non PCI related MSI interrupts, so providing a generic infrastructure for this is better than having all affected architectures implementing their own private hacks. - Support for PCI-MSI interrupt domain handling, based on the generic MSI support. This part carries the pci/msi branch from Bjorn Helgaas pci tree to avoid a massive conflict. The PCI/MSI parts are acked by Bjorn. I have two more branches on top of this. The full conversion of x86 to hierarchical domains and a partial conversion of arm/gic" * 'irq-irqdomain-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) genirq: Move irq_chip_write_msi_msg() helper to core PCI/MSI: Allow an msi_controller to be associated to an irq domain PCI/MSI: Provide mechanism to alloc/free MSI/MSIX interrupt from irqdomain PCI/MSI: Enhance core to support hierarchy irqdomain PCI/MSI: Move cached entry functions to irq core genirq: Provide default callbacks for msi_domain_ops genirq: Introduce msi_domain_alloc/free_irqs() asm-generic: Add msi.h genirq: Add generic msi irq domain support genirq: Introduce callback irq_chip.irq_write_msi_msg genirq: Work around __irq_set_handler vs stacked domains ordering issues irqdomain: Introduce helper function irq_domain_add_hierarchy() irqdomain: Implement a method to automatically call parent domains alloc/free genirq: Introduce helper irq_domain_set_info() to reduce duplicated code genirq: Split out flow handler typedefs into seperate header file genirq: Add IRQ_SET_MASK_OK_DONE to support stacked irqchip genirq: Introduce irq_chip.irq_compose_msi_msg() to support stacked irqchip genirq: Add more helper functions to support stacked irq_chip genirq: Introduce helper functions to support stacked irq_chip irqdomain: Do irq_find_mapping and set_type for hierarchy irqdomain in case OF ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq core updates from Thomas Gleixner: "This is the first (boring) part of irq updates: - support for big endian I/O accessors in the generic irq chip - cleanup of brcmstb/bcm7120 drivers so they can be reused for non ARM SoCs - the usual pile of fixes and updates for the various ARM irq chips" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip: dw-apb-ictl: Add PM support irqchip: dw-apb-ictl: Enable IRQ_GC_MASK_CACHE_PER_TYPE irqchip: dw-apb-ictl: Always use use {readl|writel}_relaxed ARM: orion: convert the irq_reg_{readl,writel} calls to the new API irqchip: atmel-aic: Add missing entry for rm9200 irq fixups irqchip: atmel-aic: Rename at91sam9_aic_irq_fixup for naming consistency irqchip: atmel-aic: Add specific irq fixup function for sam9g45 and sam9rl irqchip: atmel-aic: Add irq fixups for at91sam926x SoCs irqchip: atmel-aic: Add irq fixup for RTT block irqchip: brcmstb-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Decouple driver from brcmstb-l2 irqchip: bcm7120-l2: Extend driver to support 64+ bit controllers irqchip: bcm7120-l2: Use gc->mask_cache to simplify suspend/resume functions irqchip: bcm7120-l2: Fix missing nibble in gc->unused mask irqchip: bcm7120-l2: Make sure all register accesses use base+offset irqchip: bcm7120-l2, brcmstb-l2: Remove ARM Kconfig dependency irqchip: bcm7120-l2: Eliminate bad IRQ check irqchip: brcmstb-l2: Eliminate dependency on ARM code genirq: Generic chip: Add big endian I/O accessors ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer core updates from Thomas Gleixner: "The time(r) departement provides: - more infrastructure work on the year 2038 issue - a few fixes in the Armada SoC timers - the usual pile of fixlets and improvements" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Use the reference clock on A375 SoC watchdog: orion: Use the reference clock on Armada 375 SoC clocksource: armada-370-xp: Add missing clock enable time: Fix sign bug in NTP mult overflow warning time: Remove timekeeping_inject_sleeptime() rtc: Update suspend/resume timing to use 64bit time rtc/lib: Provide y2038 safe rtc_tm_to_time()/rtc_time_to_tm() replacement time: Fixup comments to reflect usage of timespec64 time: Expose get_monotonic_coarse64() for in-kernel uses time: Expose getrawmonotonic64 for in-kernel uses time: Provide y2038 safe mktime() replacement time: Provide y2038 safe timekeeping_inject_sleeptime() replacement time: Provide y2038 safe do_settimeofday() replacement time: Complete NTP adjustment threshold judging conditions time: Avoid possible NTP adjustment mult overflow. time: Rename udelay_test.c to test_udelay.c clocksource: sirf: Remove hard-coded clock rate
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - 'Nested Sleep Debugging', activated when CONFIG_DEBUG_ATOMIC_SLEEP=y. This instruments might_sleep() checks to catch places that nest blocking primitives - such as mutex usage in a wait loop. Such bugs can result in hard to debug races/hangs. Another category of invalid nesting that this facility will detect is the calling of blocking functions from within schedule() -> sched_submit_work() -> blk_schedule_flush_plug(). There's some potential for false positives (if secondary blocking primitives themselves are not ready yet for this facility), but the kernel will warn once about such bugs per bootup, so the warning isn't much of a nuisance. This feature comes with a number of fixes, for problems uncovered with it, so no messages are expected normally. - Another round of sched/numa optimizations and refinements, for CONFIG_NUMA_BALANCING=y. - Another round of sched/dl fixes and refinements. Plus various smaller fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) sched: Add missing rcu protection to wake_up_all_idle_cpus sched/deadline: Introduce start_hrtick_dl() for !CONFIG_SCHED_HRTICK sched/numa: Init numa balancing fields of init_task sched/deadline: Remove unnecessary definitions in cpudeadline.h sched/cpupri: Remove unnecessary definitions in cpupri.h sched/deadline: Fix rq->dl.pushable_tasks bug in push_dl_task() sched/fair: Fix stale overloaded status in the busiest group finding logic sched: Move p->nr_cpus_allowed check to select_task_rq() sched/completion: Document when to use wait_for_completion_io_*() sched: Update comments about CLONE_NEWUTS and CLONE_NEWIPC sched/fair: Kill task_struct::numa_entry and numa_group::task_list sched: Refactor task_struct to use numa_faults instead of numa_* pointers sched/deadline: Don't check CONFIG_SMP in switched_from_dl() sched/deadline: Reschedule from switched_from_dl() after a successful pull sched/deadline: Push task away if the deadline is equal to curr during wakeup sched/deadline: Add deadline rq status print sched/deadline: Fix artificial overrun introduced by yield_task_dl() sched/rt: Clean up check_preempt_equal_prio() sched/core: Use dl_bw_of() under rcu_read_lock_sched() sched: Check if we got a shallowest_idle_cpu before searching for least_loaded_cpu ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull leftover perf fixes from Ingo Molnar: "Two perf fixes left over from the previous cycle" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf session: Do not fail on processing out of order event x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf events update from Ingo Molnar: "On the kernel side there's few changes, the one that stands out is PEBS machine state sampling support on x86, by Stephane Eranian. On the tooling side: User visible tooling changes: - Don't open the DWARF info multiple times, keeping instead a dwfl handle in struct dso, greatly speeding up 'perf report' on powerpc. (Sukadev Bhattiprolu) - Introduce PARSE_OPT_DISABLED option flag and use it to avoid showing undersired options in tools that provides frontends to 'perf record', like sched, kvm, etc (Namhyung Kim) - Fallback to kallsyms when using the minimal 'ELF' loader (Arnaldo Carvalho de Melo) - Fix annotation with kcore (Adrian Hunter) - Support source line numbers in annotate using a hotkey (Andi Kleen) - Callchain improvements including: * Enable printing the srcline in the history * Make get_srcline fall back to sym+offset (Andi Kleen) - TUI hist_entry browser fixes, including showing missing overhead value for first level callchain. Detected comparing the output of --stdio/--gui (that matched) with --tui, that had this problem. (Namhyung Kim) - Support handling complete branch stacks as histograms (Andi Kleen) Tooling infrastructure changes: - Prep work for supporting per-pkg and snapshot counters in 'perf stat' (Jiri Olsa) - 'perf stat' refactorings, moving stuff from it to evsel.c to use in per-pkg/snapshot format changes (Jiri Olsa) - Add per-pkg format file parsing (Matt Fleming) - Clean up libelf feature support code (Namhyung Kim) - Add gzip decompression support for kernel modules (Namhyung Kim) - More prep patches for Intel PT, including a a thread stack and more stuff made available via the database export mechanism (Adrian Hunter) - More Intel PT work, including a facility to export sample data (comms, threads, symbol names, etc) in a database friendly way, with an script to use this to create a postgresql database. (Adrian Hunter) - Make sure that thread->mg->machine points to the machine where the thread exists (it was being set only for the kmaps kernel modules case, do it as well for the mmaps) and use it to shorten function signatures (Arnaldo Carvalho de Melo) ... and lots of other fixes and smaller improvements" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) perf report: In branch stack mode use address history sorting perf report: Add --branch-history option perf callchain: Support handling complete branch stacks as histograms perf stat: Add support for snapshot counters perf stat: Add support for per-pkg counters perf tools: Remove perf_evsel__read interface perf stat: Use read_counter in read_counter_aggr perf stat: Make read_counter work over the thread dimension perf stat: Use perf_evsel__read_cb in read_counter perf tools: Add snapshot format file parsing perf tools: Add per-pkg format file parsing perf evsel: Introduce perf_evsel__read_cb function perf evsel: Introduce perf_counts_values__scale function perf evsel: Introduce perf_evsel__compute_deltas function perf tools: Allow to force redirect pr_debug to stderr. perf tools: Fix segfault due to invalid kernel dso access perf callchain: Make get_srcline fall back to sym+offset perf symbols: Move bfd_demangle stubbing to its only user perf callchain: Enable printing the srcline in the history perf tools: Collapse first level callchain entry if it has sibling ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU updates from Ingo Molnar: "These are the main changes in this cycle: - Streamline RCU's use of per-CPU variables, shifting from "cpu" arguments to functions to "this_"-style per-CPU variable accessors. - signal-handling RCU updates. - real-time updates. - torture-test updates. - miscellaneous fixes. - documentation updates" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) rcu: Fix FIXME in rcu_tasks_kthread() rcu: More info about potential deadlocks with rcu_read_unlock() rcu: Optimize cond_resched_rcu_qs() rcu: Add sparse check for RCU_INIT_POINTER() documentation: memory-barriers.txt: Correct example for reorderings documentation: Add atomic_long_t to atomic_ops.txt documentation: Additional restriction for control dependencies documentation: Document RCU self test boot params rcutorture: Fix rcu_torture_cbflood() memory leak rcutorture: Remove obsolete kversion param in kvm.sh rcutorture: Remove stale test configurations rcutorture: Enable RCU self test in configs rcutorture: Add early boot self tests torture: Run Linux-kernel binary out of results directory cpu: Avoid puts_pending overflow rcu: Remove "cpu" argument to rcu_cleanup_after_idle() rcu: Remove "cpu" argument to rcu_prepare_for_idle() rcu: Remove "cpu" argument to rcu_needs_cpu() rcu: Remove "cpu" argument to rcu_note_context_switch() rcu: Remove "cpu" argument to rcu_preempt_check_callbacks() ...
-
