ath.git patches for v5.10. Major changes:

wcn36xx

* add support wcn3680 Wi-Fi 5 devices

ath11k

* spectral scan support for ipq6018

mt76 patches for 5.10

* mt7663 runtime power management improvements
* performance improvements
* sdio support fixes
* testmode fixes
* mt7622 fixes
* 7915 A-MSDU offload
* cleanups

# gpg: Signature made Thu 24 Sep 2020 07:10:25 PM EEST using DSA key ID 02A76EF5
# gpg: Good signature from "Felix Fietkau <nbd@nbd.name>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 75D1 1A7D 91A7 710F 4900  42EF D77D 141D 02A7 6EF5

Remove A-MSDU max_tx_fragments constraint for sdio since the check is
already performed in mt7663s_tx_run_queue routine
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Add a missing offchannel condition for channel switch reason, which
bypasses DPD calibration to reduce scanning time.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes variable types in mt76x02_dfs_create_sequence and
mt76x02_dfs_add_event_to_sequence
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Release mcu message memory in case of failure in mt7915_mcu_add_beacon
routine

Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Taking the same approach as initvals_phy.h.

Fixes the following W=1 kernel build warning(s):

 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:218:35: warning: ‘mt76x0_dcoc_tab’ defined but not used [-Wunused-const-variable=]
 218 | static const struct mt76_reg_pair mt76x0_dcoc_tab[] = {
 | ^~~~~~~~~~~~~~~
 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:86:35: warning: ‘mt76x0_bbp_init_tab’ defined but not used [-Wunused-const-variable=]
 86 | static const struct mt76_reg_pair mt76x0_bbp_init_tab[] = {
 | ^~~~~~~~~~~~~~~~~~~
 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:48:35: warning: ‘mt76x0_mac_reg_table’ defined but not used [-Wunused-const-variable=]
 48 | static const struct mt76_reg_pair mt76x0_mac_reg_table[] = {
 | ^~~~~~~~~~~~~~~~~~~~
 drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h:14:35: warning: ‘common_mac_reg_table’ defined but not used [-Wunused-const-variable=]
 14 | static const struct mt76_reg_pair common_mac_reg_table[] = {
 | ^~~~~~~~~~~~~~~~~~~~

Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Unlock dfs channels for mt7615 devices since the driver supports
radar detection. Dfs pattern detector has been tested successfully by
mt7615 users.
Do not unlock DFS frequencies for mt7663 devices since it has not been
tested yet.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to avoid using stale isr values, check return value from
sdio_readsb() in mt7663s_rx_work()
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Introduce sdio tx aggregation to reduce bus transaction ands improve tx
throughput. For the moment the skb are copied in a dedicated buffer
since mmc APIs do not support sg table for zero-copy.
Since skb data are already copied in xmit_buff[], avoid linearization in
ma80211 layer. Relying on tx aggregation, we improve tx tpt of ~65%.
Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Look just at reported quota since the hw sporadically reports mcu tx
quota without setting WHIER_TX_DONE_INT_EN bit
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Move frame pad computation out of mt76_skb_adjust_pad routine.
This is a preliminary patch to introduce sdio tx aggregation.
Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is a preliminary patch to introduce sdio tx aggregation
Tested-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to not update the available quota in case of a tx error, split
mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota routines
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Since the sdio engine does not report quota for altx queue, move
ctl/mgmt traffic to standard data queues
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Set poll timeout to 3s for mt7622 devices in order to avoid fw hangs.
Swap mt7622_trigger_hif_int and doorbell configuration order in
mt7615_mcu_drv_pmctrl routine.
Introduce mt7615_mcu_lp_drv_pmctrl routine to take care of drv_own
configuration for runtime-pm.

Fixes: 08523a2a ("mt76: mt7615: add mt7615_pm_wake utility routine")
Fixes: 894b7767 ("mt76: mt7615: improve mt7615_driver_own reliability")
Fixes: 757b0e7f ("mt76: mt7615: avoid polling in fw_own for mt7663")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

The MCU field should contain a boolean 0/1, not the flag itself.
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/wireless/mediatek/mt76/mt7615/testmode.c: In function mt7615_tm_set_tx_power
drivers/net/wireless/mediatek/mt76/mt7615/testmode.c:83:7: warning: variable ‘index’ set but not used [-Wunused-but-set-variable]=

commit 4f0bce1c ("mt76: mt7615: implement testmode support")
involved this unused variable, remove it.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Since the switch to using AQL by default, mtxq->retry_q is never filled anymore
Remove it to get rid of a few more unnecessary cycles in the tx path
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This way we can make some functions static
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Unlike 7615, 7915 uses the same AC index for rx and tx, which matches the
LMAC queue mapping
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Compared to mac80211 ACs, MT7915 queue numbers are in reverse order
There is no need for the defensive WARN_ON_ONCE, so we can simplify
the function to avoid the array lookup
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Accessing them from uncached memory can be expensive, so it's cheaper to
cache them
Signed-off-by: Felix Fietkau <nbd@nbd.name>

he_pe_duration and he_rts_thres have the same unit as the fields in the HE
operation IE
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This improves performance by allowing the scheduler to move the tx scheduling
work to idle CPUs. Since tx scheduling work is very latency sensitive and
kept short via AQL, sched_set_fifo_low is used to keep worker priority above
normal tasks
Signed-off-by: Felix Fietkau <nbd@nbd.name>

In order to avoid keeping work like tx scheduling pinned to the CPU it was
scheduled from, it makes sense to switch from tasklets to kernel threads.

Unlike a workqueue, this one only allows one fixed worker function to be
executed by the worker thread. Because of that, there is less locking
and less code for scheduling involved.
This is important because the tx worker is scheduled often in a hot path
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This avoids running out of available tx tokens
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Do not alter the tx/rx chain settings during channel setup, antennas are
remapped by the testmode specific register writes already
Signed-off-by: Felix Fietkau <nbd@nbd.name>

This is used for testmode tx antenna selection
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Avoid firmware falling into spectrum mode since that will set
unexpected PSE/PLE thresholds which lead to Tx hang.

This mode should be cleaned before firmware download stage.
Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Increase data queue size to improve performance.
Reduce PS/mgmt queue size
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Stop relying on global tx ring size, reduce size for PS/mgmt queue
Signed-off-by: Felix Fietkau <nbd@nbd.name>

All members except for the struct mt76_queue pointer have been removed
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Now that AQL works well on all mt76 drivers, completely replace the arbitrary
burst sizing and number of bursts logic for tx scheduling.
For the short period of time in which AQL does not work well yet, limit each
stations to 16 in-flight packets that have no estimated tx time.
This should avoid filling the queue if a station connects and queues up a
large number of packets before rate control information is available, especially
with hardware rate control
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Since txq selection was moved to mac80211, it is no longer used
Signed-off-by: Felix Fietkau <nbd@nbd.name>

It is not needed
Signed-off-by: Felix Fietkau <nbd@nbd.name>

Cleanup and preparation for changing tx scheduling behavior
Signed-off-by: Felix Fietkau <nbd@nbd.name>