- 26 Apr, 2019 3 commits
-
-
Sara Sharon authored
When creating the IEs for the nontransmitted BSS, the index element is skipped. However, we need to get DTIM values from it, so don't skip it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Avraham Stern authored
P2P device interface type was not indicated in the supported interface types even when hwsim was configured with p2p device support. Fix it. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Shaul Triebitz authored
The iwlwifi driver creates one rule per channel, thus it needs more rules than normal. To solve this, increase NL80211_MAX_SUPP_REG_RULES so iwlwifi can also fit UHB (ultra high band) channels. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
- 08 Apr, 2019 10 commits
-
-
Sunil Dutt authored
This interface allows the host driver to offload OWE processing to user space. This intends to support OWE (Opportunistic Wireless Encryption) AKM by the drivers that implement SME but rely on the user space for the cryptographic/OWE processing in AP mode. Such drivers are not capable of processing/deriving the DH IE. A new NL80211 command - NL80211_CMD_UPDATE_OWE_INFO is introduced to send the request/event between the host driver and user space. Driver shall provide the OWE info (MAC address and DH IE) of the peer to user space for cryptographic processing of the DH IE through the event. Accordingly, the user space shall update the OWE info/DH IE to the driver. Following is the sequence in AP mode for OWE authentication. Driver passes the OWE info obtained from the peer in the Association Request to the user space through the event cfg80211_update_owe_info_event. User space shall process the OWE info received and generate new OWE info. This OWE info is passed to the driver through NL80211_CMD_UPDATE_OWE_INFO request. Driver eventually uses this OWE info to send the Association Response to the peer. This OWE info in the command interface carries the IEs that include PMKID of the peer if the PMKSA is still valid or an updated DH IE for generating a new PMKSA with the peer. Signed-off-by: Liangwei Dong <liangwei@codeaurora.org> Signed-off-by: Sunil Dutt <usdutt@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove policy initialization - no longer exists] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Narayanraddi Masti authored
Add support for mesh airtime link metric attribute NL80211_STA_INFO_AIRTIME_LINK_METRIC. Signed-off-by: Narayanraddi Masti <team.nmasti@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
vamsi krishna authored
This commit adds the support to specify the RSSI thresholds per band for each match set. This enhances the current behavior which specifies a single rssi_threshold across all the bands by introducing the rssi_threshold_per_band. These per band rssi thresholds are referred through NL80211_BAND_* (enum nl80211_band) variables as attribute types. Such attributes/values per each band are nested through NL80211_ATTR_SCHED_SCAN_MIN_RSSI. These band specific rssi thresholds shall take precedence over the current rssi_thold per match set. Drivers indicate this support through %NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD. These per band rssi attributes/values does not specify "default RSSI filter" as done by NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to stay backward compatible. That said, these per band rssi values have to be specified for the corresponding matchset. Signed-off-by: vamsi krishna <vamsin@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [rebase on refactoring, add policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
The sched scan code here is really deep - avoid one level of indentation by short-circuiting the loop instead of putting everything into the if block. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-
Vlad Buslov authored
John reports: Recent refactoring of fl_change aims to use the classifier spinlock to avoid the need for rtnl lock. In doing so, the fl_hw_replace_filer() function was moved to before the lock is taken. This can create problems for drivers if duplicate filters are created (commmon in ovs tc offload due to filters being triggered by user-space matches). Drivers registered for such filters will now receive multiple copies of the same rule, each with a different cookie value. This means that the drivers would need to do a full match field lookup to determine duplicates, repeating work that will happen in flower __fl_lookup(). Currently, drivers do not expect to receive duplicate filters. To fix this, verify that filter with same key is not present in flower classifier hash table and insert the new filter to the flower hash table before offloading it to hardware. Implement helper function fl_ht_insert_unique() to atomically verify/insert a filter. This change makes filter visible to fast path at the beginning of fl_change() function, which means it can no longer be freed directly in case of error. Refactor fl_change() error handling code to deallocate the filter with rcu timeout. Fixes: 620da486 ("net: sched: flower: refactor fl_change") Reported-by: John Hurley <john.hurley@netronome.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
NeilBrown says: ==================== Convert rhashtable to use bitlocks This series converts rhashtable to use a per-bucket bitlock rather than a separate array of spinlocks. This: reduces memory usage results in slightly fewer memory accesses slightly improves parallelism makes a configuration option unnecessary The main change from previous version is to use a distinct type for the pointer in the bucket which has a bit-lock in it. This helped find two places where rht_ptr() was missed, one in rhashtable_free_and_destroy() in print_ht in the test code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
NeilBrown authored
Native bit_spin_locks are not tracked by lockdep. The bit_spin_locks used for rhashtable buckets are local to the rhashtable implementation, so there is little opportunity for the sort of misuse that lockdep might detect. However locks are held while a hash function or compare function is called, and if one of these took a lock, a misbehaviour is possible. As it is quite easy to add lockdep support this unlikely possibility seems to be enough justification. So create a lockdep class for bucket bit_spin_lock and attach through a lockdep_map in each bucket_table. Without the 'nested' annotation in rhashtable_rehash_one(), lockdep correctly reports a possible problem as this lock is taken while another bucket lock (in another table) is held. This confirms that the added support works. With the correct nested annotation in place, lockdep reports no problems. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
NeilBrown authored
This patch changes rhashtables to use a bit_spin_lock on BIT(1) of the bucket pointer to lock the hash chain for that bucket. The benefits of a bit spin_lock are: - no need to allocate a separate array of locks. - no need to have a configuration option to guide the choice of the size of this array - locking cost is often a single test-and-set in a cache line that will have to be loaded anyway. When inserting at, or removing from, the head of the chain, the unlock is free - writing the new address in the bucket head implicitly clears the lock bit. For __rhashtable_insert_fast() we ensure this always happens when adding a new key. - even when lockings costs 2 updates (lock and unlock), they are in a cacheline that needs to be read anyway. The cost of using a bit spin_lock is a little bit of code complexity, which I think is quite manageable. Bit spin_locks are sometimes inappropriate because they are not fair - if multiple CPUs repeatedly contend of the same lock, one CPU can easily be starved. This is not a credible situation with rhashtable. Multiple CPUs may want to repeatedly add or remove objects, but they will typically do so at different buckets, so they will attempt to acquire different locks. As we have more bit-locks than we previously had spinlocks (by at least a factor of two) we can expect slightly less contention to go with the slightly better cache behavior and reduced memory consumption. To enhance type checking, a new struct is introduced to represent the pointer plus lock-bit that is stored in the bucket-table. This is "struct rhash_lock_head" and is empty. A pointer to this needs to be cast to either an unsigned lock, or a "struct rhash_head *" to be useful. Variables of this type are most often called "bkt". Previously "pprev" would sometimes point to a bucket, and sometimes a ->next pointer in an rhash_head. As these are now different types, pprev is NULL when it would have pointed to the bucket. In that case, 'blk' is used, together with correct locking protocol. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
NeilBrown authored
Rather than returning a pointer to a static nulls, rht_bucket_var() now returns NULL if the bucket doesn't exist. This will make the next patch, which stores a bitlock in the bucket pointer, somewhat cleaner. This change involves introducing __rht_bucket_nested() which is like rht_bucket_nested(), but doesn't provide the static nulls, and changing rht_bucket_nested() to call this and possible provide a static nulls - as is still needed for the non-var case. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
NeilBrown authored
nested_table_alloc() relies on the fact that there is at most one spinlock allocated for every slot in the top level nested table, so it is not possible for two threads to try to allocate the same table at the same time. This assumption is a little fragile (it is not explicit) and is unnecessary as cmpxchg() can be used instead. A future patch will replace the spinlocks by per-bucket bitlocks, and then we won't be able to protect the slot pointer with a spinlock. So replace rcu_assign_pointer() with cmpxchg() - which has equivalent barrier properties. If it the cmp fails, free the table that was just allocated. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Apr, 2019 27 commits
-
-
David S. Miller authored
Murali Karicheri says: ==================== net: hsr: improvements and bug fixes This series has some coding style fixes and other bug fixes. Patch 12/14, I have also done SPDX conversion. Not sure if that is the only thing needed and is correct. So please pay close attention to this patch before merge as I would like to avoid any issue related to licensing applicable for this code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aaron Kramer authored
HSR should forget nodes after configured node forget time expiry based on HSR_NODE_FORGET_TIME. As part of hsr_prune_nodes(), code checks to see if entries are to be flushed out if not heard for longer than forget time. But currently hsr_prune_nodes() is called only once during device creation. Restart the timer at the end of hsr_prune_nodes() so that hsr_prune_nodes() gets called periodically and forgotten entries are removed from node table. Signed-off-by: Aaron Kramer <a-kramer@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This adds a debugfs interface to allow display the nodes learned by the hsr master. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
Add a blank line after function declaration as suggested by checkpatch.pl -f Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
Current driver code uses camel case in many places. This is seen when ran checkpatch.pl -f on files under net/hsr. This patch fixes the code to remove camel case usage. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch add missing space around operator in code. This is seen when ran checkpatch.pl -f on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
In a multi-line statement exceeding 80 characters, logical operator should be at the end of a line instead of being at the start. This is seen when ran checkpatch.pl -f on files under net/hsr. The change is per suggestion from checkpatch. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch removes unnecessary space after a cast. This is seen when ran checkpatch.pl -f on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch replaces all instance of NULL checks such as if (foo == NULL) with if (!foo) Also if (foo != NULL) with if (foo) This is seen when ran checkpatch.pl -f on files under net/hsr and suggestion is to replace as above. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch fixes function calls that ends with '(' in a line. This is seen when ran checkpatch.pl -f option on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch fixes alignment issues in code for functions. This is seen when ran checkpatch.pl -f option on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch fixes unnecessary paranthesis from the code. This is seen when ran checkpatch.pl -f option on files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch fixes multiple blank lines in the code. This is seen when ran checkpatch.pl -f option for files under net/hsr Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Murali Karicheri authored
This patch fixes lines exceeding 80 characters. This is seen when ran checkpatch.pl with -f option for files under net/hsr. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
This test is split in two, the first part checks if a report creates a corresponding mdb entry and if traffic is properly forwarded to it, and the second part checks if the mdb entry is deleted after a leave and if traffic is *not* forwarded to it. Since the mcast querier is enabled we should see standard mcast snooping bridge behaviour. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Currently mskid is unsigned and hence comparisons with negative error return values are always false. Fix this by making mskid an int. Fixes: f058e468 ("net: hns: fix ICMP6 neighbor solicitation messages discard problem") Addresses-Coverity: ("Operands don't affect result") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mario Limonciello says: ==================== r8152: Support runtime changes of vendor mac passthu policy On some platforms ACPI method `\\_SB.AMAC` is dynamic and changes to it can influence changing the behavior of MAC pass through and what MAC address is used. When running USB reset, re-read the MAC address to use to support tools that change the policy. This is quite similar to using `SIOCSIFHWADDR` except that the actual MAC to use comes from ASL rather than from userspace. Changes from v1: * Remove an extra unneeded `ether_addr_copy` call * Use `dev_set_mac_address` to ensure all notifiers are called * Shuffle functions to allow code re-use. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mario Limonciello authored
On some platforms it is possible to dynamically change the policy of what MAC address is selected from the ASL at runtime. These tools will reset the USB device and expect the change to be made immediately. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mario Limonciello authored
This already happens later on in `rtl8152_set_mac_address` Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
The non-null check on tskb is always false because it is in an else path of a check on tskb and hence tskb is null in this code block. This is check is therefore redundant and can be removed as well as the label coalesc. if (tsbk) { ... } else { ... if (unlikely(!skb)) { if (tskb) /* can never be true, redundant code */ goto coalesc; return; } } Addresses-Coverity: ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jerome Brunet says: ==================== net: phy: add Amlogic g12a support This patchset adds the necessary bits to support network on the Amlogic g12a SoC family. Only the internal PHY and related MDIO mux needed to be addressed. The GMAC remains compatible with axg SoC family This series has been tested on the u200 (S905D2) with both the internal and external (Realtek) PHYs. Change since v2 [1]: * Change 'clk part' Reviewed-by as suggested * Remove default callback from phy drivers * Use exact match PHY macros * Default MDIO g12a as module if ARCH_MESON is enabled * Don't print error on probe defer in the g12a mdio mux Change since v1 [0]: * drop '_' from function name unrelated to locking * fix peripheral clock disable on error * fix variable declaration reverse Xmas trees * fix Kconfig dependency on CCF (Actually needed for 'struct clk_hw', Thx Andrew !) * Minor fix in the DT exemple as reported by Rob [0] https://lkml.kernel.org/r/20190314140135.19184-1-jbrunet@baylibre.com [1] https://lkml.kernel.org/r/20190329141512.29867-1-jbrunet@baylibre.com ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jerome Brunet authored
The purpose of this change is to align the gxl and g12a driver declaration. Like on the g12a variant, remove genphy_aneg_done() from the driver declaration as the net phy framework will default to it anyway. Also, the gxl phy id should be an exact match as well, so let's change this and use the macro provided. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jerome Brunet authored
The g12a SoC family uses the type of internal PHY that was used on the gxl family. The quirks of gxl family, like the LPA register corruption, appear to have been resolved on this new SoC generation. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jerome Brunet authored
Add support for the mdio mux and internal phy glue of the g12a SoC family Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # clk parts Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jerome Brunet authored
Add documentation for the device tree bindings of the MDIO mux of Amlogic g12a SoC family Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yuval Shaia authored
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-